Adium and Yahoo instant messenger contact lists not working with Leopard

After I installed Leopard, I tried to run Adium. When I tried to click on the icon and pop up my contact list to select a contact, nothing happens. I am now only able to receive messages and reply to received messages. I cannot get my contact list to pop up when clicking the icon in the dock (like I did with Tiger).
I had the same issue when using the latest Yahoo! messenger for Mac. Anyone else seeing this, or know of a fix?

Hello tross415 and welcome to the Palm forums.
What you are seeing is, if I recall correctly, a bug from Palm webOS 1.3.1 that has not yet been addressed.  If you launch Messaging on the Pre, and then select Preferences & Accounts > Add IM Acoun you will not get a button to add a Yahoo! IM account.
The work around for this issue, and to add Yahoo IM support to your Pre is to add a Yahoo email or calendar account.  When you do, the IM account will also be created.  That is the process that worked for me when Palm introduced Yahoo IM support with webOS 1.3.1.
Hope that helps,
Alan G

Similar Messages

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • I generated a new Itunes Account and now the App sync. does not work with theapps I bought with the old account. Is it possible to merge the old and the new account ?

    I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?

    It is not possible to merge Apple IDs. 
    Why did you create a new one?

  • I just upgraded to the maverick and, of course, the iPhoto does not work with it.  How do I upgrade to version 11?  I cannot find it anywhere

    Recently upgraded to Maverick and the version of iphoto does not work with it.  How do I get and download the version 11?    I can't find it anywhere

    Which iPhoto? 9.4.6  and 9.5.1 work here.
    FWIW, iLife '11 is available here: http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES

  • FCP not working with Leopard

    Every time I try and launch FCP5 Studio 2 it gives me the "This application Final Cut Pro quit unexpectedly." Anyone have a solution to this? Anyone else experienced this?
    Do I just have to wait for an update?

    Having same problem with FCP v 6.0.1 and tried the FCP Rescue 6..... Also does not work with Leopard.
    I am just about to try this proceedure.
    Delete the User Preferences
    You can resolve many issues by restoring Final Cut Pro back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro user preference settings to their original state, do the following:
    In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
    Remove the “com.apple.finalcutpro.plist” file from the Preferences folder.
    Remove the “Final Cut Pro User Data” folder from the Preferences folder.
    Will report shortly.

  • Backing up the BB messenger contact list not available

    In the old versions of Blackberry, we had the option to backup the BB messenger contact list to the device, the media card, or remotely to an email. However, this feature is not available in the new BB Z10 !!!!! This feature is significant and necessary for all users Why was it omitted in the Z10 ??

    Your BBM contact list is now attached to, and backed up to, your BlackBerry ID.

  • Contact List not working properly

    Today, my iPad 2 contact list stopped working properly. It opens but does not remain open. It stays open for one or two seconds and then closes. No opportunity to add/delete contacts. Anyone seen this before? I've never had a problem. Any hints or tips are appreciated. Thanks.

    You did restore your iPad from that backup that was taken just prior to upgrading to iOS 5, right?
    All apps and settings are included inthe backup.

  • "Next" and "Previous" functionality on UIX tables not working with 10g

    With new release of JDeveloper(10G), the "Next" and "Previous" navigation buttons/links on UIX tables are not working. I tried different approaches:
    1. It does not work with Data Controls built from Java Beans or from TopLink.
    2. I tried without using Data Controls and it still does not work.
    I shows "Next" and "Previous" buttons on the page. But it shows all records on the page rather then showing limited records. Say for example if the block size is 5 and total number of records are 15, it shows all 15 records in the table but the "next" and "Previouds" button would say "1-5 of 15".
    Did any of you observe the same behaviour?

    Hi Shital -
    Thanks for the additional info...
    When I said that the total number of records is 15, I
    meant that my tableData's DataObjectList contains 15
    entries. (In case of DataControls you don't even use
    DataObjectList, but for my non data control
    applications I used DataObjectList). You are saying
    that If I want to display only 5 records per page
    then I will need to provide a DataObjectList with
    five items. Then for next five records from 6-10 I
    will have to program in such a way that my method
    call returns 6-10 records.That's correct. In the case where you are explicitly providing data to the table via a DataObjectList, you need to feed the data to the table in page size blocks - and you also need to handle the table's goto event to scroll the table to the next/previous block of data.
    In previous version of
    UIX(2.1.7) I never had to program for next and
    previous buttons. UIX tables used to take care of
    that. That's why I am so surprised.It sounds like you must have been using the <bc4j:table> component. Is that the case?
    Getting back to your original issue...
    1. It does not work with Data Controls built
    from Java Beans or from TopLink.I believe that this is a bug in the preview release - and I'm fairly sure this will be addressed by production. In production, ADF should automatically handle wiring up table scrolling for you when binding your table to a data control - whether the data control is implemented via JavaBeans, Toplink, or BC4J. I believe that in the preview release, scrolling only working when binding to a BC4J data control.
    Andy

  • SQLDEVELOPER 2.5 and above on WinXP/Win7 does not work with OID auth ?

    Hi,
    I have SQLDEVELOPER 1.5 on my WinXP which works fine with database local users as well as global users(OID) authentication. But with SQLDEVELOPER 2.5 and above it throws below error with OID authentication.. local user authentication is however fine.
    Status:Failure-test failed:unsupported verified type
    Any idea why Sqldeveloer 2.5 and above does not work with OID auth?
    Thanks for help
    Sivaji

    It might be to do with the oracle client version or the JDBC version. (for example v3 needs the 11i jdbc drivers and associated dlls for oci connections.

  • Photoshop 7 DOES NOT WORK with Leopard ( OS 10.5 )

    If you are not prepared to upgrade your Photoshop 7, DO NOT UPGRADE TO LEOPARD.
    Photoshop 7 and OS 10.5.x (Leopard) are not compatible. When Adobe released Photoshop 7 in 2001 as a Universal Binary for OS9 and OSX they had no idea that Apple would be switching to an Intel chip in 2006. As the release of Leopard is also the end of the Classic environment, this may be the reason Photoshop 7 does not work in Leopard.
    As of the release of CS4, Photoshop 7 can no longer be used as a path to upgrade Photoshop. A full version has to be bought now. But Photoshop CS or later can still be used as an upgrade to Photoshop CS4.
    It is recommended that Photoshop 7 owners still looking to save money on upgrades stay away from eBay, as, unfortunately, much of the software listed is pirated or misrepresented and you will still not be able to upgrade to CS4.
    [topic updated by Forum Host]

    There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

  • Osascript for remote login does not work with Leopard

    We are testing Leopard on one computer in our labs. The only problem so far is that the osascript that we use to remote login to the computers stopped working (although it works fine on the Tiger machines):
    osascript <<EndOfMyScript
    tell application "System Events"
    keystroke "public"
    keystroke tab
    delay 0.5
    keystroke return
    keystroke tab
    delay 0.5
    keystroke return
    keystroke return
    end tell
    EndOfMyScript
    This is a public account with no user password. I've read the discussion below, but have not been able to tweak the command so that it works with Leopard. Any suggestions?
    Thanks.
    http://lists.apple.com/archives/Remote-desktop/2007/Nov/msg00045.html

    I'm having a similar problem - the script below works with my G5 iMacs running 10.4.9 but not the Intel iMacs running 10.4.8. It almost works - the username and password appear in the right boxes, so I run around the room pressing the Return key.
    # This script when used with ASR Send UNIX command will login workstations at the LoginWindow.
    # The script assumes that the cursor is focused in the Name field.
    osascript -e 'tell application "System Events" to keystroke "username"'; \
    osascript -e 'tell application "System Events" to keystroke tab'; \
    osascript -e 'tell application "System Events" to delay 0.5'; \
    osascript -e 'tell application "System Events" to keystroke "password"'; \
    osascript -e 'tell application "System Events" to delay 0.5'; \
    osascript -e 'tell application "System Events" to keystroke return'
    Message was edited by: Catocop

  • Non iCloud contact sync not working with iPhone 4S and Microsoft Windows/Outlook

    Trying to sync contacts without success! Have iPhone 4S and Microsoft Windows, not using iCloud.  I've gone through the Info route and told it to sync but the data doesn't transfer.  Any idea why?

    what version of Outlook are you using. I know right now its not compatible with Outlook 2013.

  • Lync 2011 - Contact List Not Working after Upgrade

    I updated my Lync 2011 client that was running perfectly fine.  Once the update was complete the contact list area of the application is blank.  There is no way to add new contacts or groups.
    I uninstalled and reinstalled the app with the update.  I am having the same issue.
    I am an Office 365 user with a Mac running Mavericks.
    Please help!

    Hi,
    The forum you posted is for Lync Server On Premise only. The issue is more related to Lync online, you can also post a question on Office365 forum for assistance. Thank you for your understanding.
    http://community.office365.com/en-us/forums/163/categories.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Contacts is not working with yosemite

    how resolve problem
    Process:               Contacts [406]
    Path:                  /Applications/Contacts.app/Contents/MacOS/Contacts
    Identifier:            com.apple.AddressBook
    Version:               9.0 (1498)
    Build Info:            AddressBook_executables-1498000000000000~1
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Contacts [406]
    User ID:               501
    Date/Time:             2014-10-22 09:27:23.667 +0300
    OS Version:            Mac OS X 10.10 (14A389)
    Report Version:        11

    Some people might have success but more users are reporting issues with Yosemite, Please refer to the link below and the other links therein that might possible help you for now.
    http://supportforums.blackberry.com/t5/BlackBerry-​Link/Blackberry-Link-not-working-after-Yosemite-OS​...

Maybe you are looking for