Adjust and Effects window

How do I force the Adjust and Effects windows to be active whenever I edit a picture?
Michael Spencer

Michael:
You have to click on the Effects or Adjust button at the bottom of the Edit window. They do not open automatically.
If you do not seem them in the tool bark look for a couple of chevrons >> at the right of the bottom tool bar that mean the window is too narrow. You need to either widen the window to bring out the hidden tools or click on the chevrons to select them in the menu that drops down.
Do you Twango?

Similar Messages

  • I've been using FCP 7 on my iMac for quite some time with great success.  Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

    Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug)  I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years.  I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

    YOU ARE A LIFE SAVER!  I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

  • Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

    Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

    If you are going to use Mac OS X and its associated applications, and a BootCamp partition with Windows 8, and MS Office and all of the work created there, you will more than likely run out of space on a 128 GB SSD pretty quickly...especially if you put any music, photos or videos on it.  Those things take a lot of space so you will have to be very, very careful about what you want to put on a 128 GB storage space.  You would be better off going for 512 GB with what you plan on doing with it.

  • I just upgraded to OSX version 10.8.3 and since then all animations are defective. The dock is jerky! The effects of opening and closing windows ranging in shots!  What should I do?

    I just upgraded to OSX version 10.8.3 and since then all animations are defective.
    The dock is jerky!
    The effects of opening and closing windows ranging in shots!
    What should I do?

    You can check the status of your drive's indexing by clicking the Spotlight menu to see if there is a progress bar at the bottom of it, and can also open Activity Monitor and click the "%CPU" column to sort by CPU usage, to see if the processes "mds" or "mdworker" are currently active and using your CPU.
    If so, then wait for them to finish. However, if not then try rebooting and then hold the Shift key immediately after you hear the boot chimes. This will load the system into Safe Mode, which should run some checks and maintenance routines on the system. Then reboot normally to see if the problem persists.
    How much RAM do you have installed on your system? You can see this by choosing About This Mac from the Apple menu.

  • When using lighting effects in cc programme freezes and then window comes up sayind amd driver stopped working but is now ok. Tried to open lighting effects in cs6  and default spotlight is there but then it freezes. No mention of driver problems. Any  s6

    Problem with accessing lighting effects in cc and cs6. In cc programme freezes and then window appears saying amd driver stopped working but is now ok but cc still frozen. Tried opening in cs6 no problem with driver but just default spotlight appears and then programme freezes. Any suggestions.

    That is  very old for drivers and new driver for the chipset will not be coming I do not see it as supported either Photoshop CC and CC 2014 GPU FAQ
    Tested video cards for Photoshop CC and CC 2014
    Adobe tested the following video cards before the release of Photoshop CC and CC 2014. This document lists the video card by series. The minimum amount of VRAM supported on video cards for Photoshop CC and CC 2014 is 512 MB.
    Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
    Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
    nVidia GeForce: 400, 500, 600, 700 series
    nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
    nVidia GRID K1, K2
    AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
    AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
    AMD/ATI FireGL: W5000, W7000, W8000
    Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
    Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.

  • How to merge partitions in Windows Server 2008 quickly and effectively?

    How to merge partitions in Windows Server 2008 quickly and effectively?

    Hi,
    In Windows systems we can only extend a partition to unallocated space behind it - so if we have 2 consistent partitions, we can only delete the second one and extend the first one.
    If the 2 partitions are on 2 different disks, you can also create a spanned volume - you will still need to delete the second partition and convert both disks to dynamic disk to create the spanned volume. 
    If you have any feedback on our support, please send to [email protected]

  • After closing [window X] then opening new/different [window Y] from 'library' etc (Y) opens normally with undesired 'tab' of (X) Intentional? If so, adjustable and how??

    After closing [window X] then opening new/different [window Y] from 'library' etc> (Y) opens normally with undesired 'tab' of (X)> Intentional? If so, adjustable and how??

    If you click on the bottom library what is the file path that is  displayed?
    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • Can I view the browser window and the effects window at the same time?

    I just got a second monitor to complement my 24" iMac, and would like to take advantage of it by having the effects window and the browser window with all my clips open at the same time. Anyone know if this is possible?

    I think you just need to grab the Effects tab and drag it out of the Browser onto your extra monitor (though I could be wrong).

  • Media and Effects manager and video windows won't show up when STP launches

    Today I launched Soundtrack Pro (from FCP Studio 5 Academic) and neither the Media and Effects Manager window (with Browser, Search, Favorites, Bin & Effects tabs) or the Video would show up. All I get is the project window.
    When I tried importing an audio file or opening a multi track file, I still don't get these two windows, and under the window menu, all of these options are GREYED OUT.
    Is there a certain setting I need to bring up the other two windows this program needs? Shouldn't they just be there when the program launches? HELP!

    Update:
    So, I just tried re-installing the software and I still only get the multi-track window when the program launches. I can not see any way to get the video viewer or Media and Effects manager windows to show up.
    Please, what am I doing wrong?

  • TS3274 The sound effect window is stuck on screen and volumn button not working

    I have the Sound effect window stuck on my screen and the volumn butoon wont work.

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Jabber and Bonjour windows won't open

    My jabber and bonjour windows have stopped opening. They used to work. One day I closed them and can't get them open again. Any help out there?

    Hi,
    Summary of the last.
    In iChat > Preferences > Accounts the items should be marked as Use the Account
    This will log it in but will not guarantee display of the Account's Buddy List as you can Hide it as I described before.
    In iChat > Preferences > Accounts the list is drag-able so that they can be in any order you want.
    This effects the order they display in iChat's Window menu and the Keystrokes Used. If you have them as AIM, Bonjour then Jabber - the Keystrokes will be Apple (⌘) key and 1 for AIM, then Apple (⌘) and 2 for Bonjour and the Jabber one is then Apple(⌘) and 3 (Keys are used together at the same time)
    It also effect the order the accounts display in iChat menu > Accounts.
    Clicking this red button will hide that particular Buddy List
    This is My iChat Window Menu.
    It show three accounts logged in.
    These menu Options do not mean the Buddy List is visible.
    As I have iChat 4, the order is as I set them in iChat > Preferences > Accounts as the list here can have one item dragged above or below another.
    As I have two names that work with the AIM servers the AM valid names shows as the Account name rather than saying "AIM Account"
    IF you highlight the Buddy List Name as I have done in this pic you can Hide or Reveal the Buddy List (Alternate action). Using the red button highlighted in the first pic hides the Buddy List)
    You will notice the Keystrokes to use at the end of the line.
    I am not sure where you mean you are clicking on a Red button in your last paragraph - unless you mean you are clicking on the iChat icon in the DOCK when it displays a red blob with a number to say how many text messages you have not read there are.
    It is possible to have a chat with a Buddy from a List that is Hidden and clicking the iChat icon should bring the Chat window to the Front rather than make the Buddy List appear.
    Unfortunately I do not have a Buddy free at the moment I write this to check the variants.
    8:03 PM Sunday; June 29, 2008

  • Is it possible to resize the log and capture window?

    Hi,
    Using Final cut pro, I would like to make my capture window a bit bigger while capturing. I am capturing footage via my Blackmagic Infinity card and get the input through an HDMI cable. I'm capturing in Apple Pro ress on 720p, 59,59 fps.
    For a good overview of what I'm capturing at the moment, I would love to have a bigger capture window. For all I know, FC pro doesn't support the resizing of the log and capture window. Anyone an idea on how to solve this?
    Thank you.

    In my case, the capture window is adjustable if I am capturing SD (DVCAM) video. I can also use the scopes in this case. (Good if you are recording to disk, or using a laptop for monitoring.)
    However, both features (adjustable capture window and scopes) are not available if capturing HD (HDV in my case) video.
    Message was edited by: amarasme

  • Can I install Windows 8 (DEMO) on a MAC and play windows based games ?

    Can I install Windows 8 (DEMO) on a MAC and play windows based games ?

    I installed the Developer beta with Bootcamp Assistant yesterday and was very impressed with the ease of the installation. Unfortunately, and I don't know if this is a problem with my video BIOS on my Macbook Air, but Windows 8 installs with two screens split horizontally - so it's effectively useless.
    I tried 3 times and gave up. The same thing happens with Linux distributions, however with Linux I can pass "nomodeset" on the kernel command line which fixes it. I don't know how to do that in Windows.
    This was happening with both 64x and 32-bit Win8 fwiw.
    Oh, also...when I was trying to play around with Bootcamp.exe inside Windows 8, I remember a message popping up saying Bootcamp is only configurable with Windows 7 ISOs. But aside from the kernel graphics issues and some driver compatibility problems, Bootcamp loaded the Win8 ISOs fine.

  • Unable to scan and install windows updates on Win 2008 R2 server

    I've encountered some of my win 2008 servers are unable to scan and receive windows updates from SCCM 2012. Browse through the logs and found some error code related to
    0x80244023. Excerpt from the WindowsUpdate and WUAHandler is as below. Searched the net and found some workaround which is to rename the registry key
    WinHTTPSettings to WinHTTPSettingsx (by adding x at the end of the string)
    under HKEY_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> Connections.
    I've did just that on the effected servers and after running again the Software Update Scan Cycle action, it is now able to scan and install the updates. My questions is, based on you guys experience, is there any repercussion (apart from enable to install
    software updates) that I could encounter in changing the registry key value WinHTTPSettings?
    WUAHandler
    <![LOG[Scan results will include all superseded updates.]LOG]!><time="04:04:40.982-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="872" file="cwuahandler.cpp:2913">
    <![LOG[Search Criteria is (DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')]LOG]!><time="04:04:40.982-480" date="09-20-2014" component="WUAHandler" context="" type="1"
    thread="872" file="cwuahandler.cpp:2916">
    <![LOG[Async searching of updates using WUAgent started.]LOG]!><time="04:04:40.988-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="872" file="cwuahandler.cpp:579">
    <![LOG[Async searching completed.]LOG]!><time="04:05:06.262-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="8112" file="cwuahandler.cpp:2068">
    <![LOG[OnSearchComplete - Failed to end search job. Error = 0x80244023.]LOG]!><time="04:05:06.263-480" date="09-20-2014" component="WUAHandler" context="" type="3"
    thread="872" file="cwuahandler.cpp:3064">
    <![LOG[Scan failed with error = 0x80244023.]LOG]!><time="04:05:06.263-480" date="09-20-2014" component="WUAHandler" context="" type="3" thread="872" file="cwuahandler.cpp:3520">
    WindowsUpdate
    2014-09-20 06:04:03:506  552 634 PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2014-09-20 06:04:03:506  552 634 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
    http://"SCCM Server":8530/ClientWebService/client.asmx
    2014-09-20 06:04:25:166  552 634 PT WARNING:
    GetConfig failure, error = 0x80244023, soap client error = 10, soap error code = 0, HTTP status code = 504
    2014-09-20 06:04:25:166  552 634 PT WARNING:
    PTError: 0x80244023
    2014-09-20 06:04:25:166  552 634 PT WARNING:
    GetConfig_WithRecovery failed: 0x80244023
    2014-09-20 06:04:25:166  552 634 PT WARNING: RefreshConfig failed: 0x80244023
    2014-09-20 06:04:25:166  552 634 PT WARNING: RefreshPTState failed: 0x80244023
    2014-09-20 06:04:25:166  552 634 PT WARNING: Sync of Updates: 0x80244023
    2014-09-20 06:04:25:166  552 634 PT WARNING: SyncServerUpdatesInternal failed: 0x80244023
    2014-09-20 06:04:25:166  552 634 Agent   * WARNING:
    Failed to synchronize, error = 0x80244023
    2014-09-20 06:04:25:170  552 634 Agent   * WARNING: Exit code = 0x80244023
    2014-09-20 06:04:25:170  552 634 Agent *********
    2014-09-20 06:04:25:170  552 634 Agent **  END  **  Agent: Finding updates [CallerId = CcmExec]
    2014-09-20 06:04:25:170  552 634 Agent *************
    2014-09-20 06:04:25:170  552 634 Agent WARNING:
    WU client failed Searching for update with error 0x80244023
    2014-09-20 06:04:25:171 5752 de4 COMAPI >>--  RESUMED  -- COMAPI: Search [ClientId = CcmExec]
    2014-09-20 06:04:25:172 5752 de4 COMAPI   - Updates found = 0
    2014-09-20 06:04:25:172 5752 de4 COMAPI   - WARNING: Exit code = 0x00000000, Result code = 0x80244023
    2014-09-20 06:04:25:172 5752 de4 COMAPI ---------
    2014-09-20 06:04:25:172 5752 de4 COMAPI --  END  --  COMAPI: Search [ClientId = CcmExec]
    2014-09-20 06:04:25:172 5752 de4 COMAPI -------------
    2014-09-20 06:04:25:172 5752 de4 COMAPI WARNING: Operation failed due to earlier error, hr=80244023
    2014-09-20 06:04:25:172 5752 de4 COMAPI FATAL:
    Unable to complete asynchronous search. (hr=80244023)
    2014-09-20 06:04:30:171  552 634 Report REPORT EVENT: {37DD5321-4FD5-4024-9C84-1FB9C04D4A5A} 2014-09-20 06:04:25:169+0800 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80244023 CcmExec Failure Software
    Synchronization Windows Update Client failed to detect with error 0x80244023.

    Hi
    If SCCM is setup correctly and your boundaries are correct then once you deploy updates the agents will pick them up.
    Also make sure you SUP role has the FQDN set. Lastly if you are using port 8530 make sure it is open.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Use Color or Magic Bullet Looks for complete grade and effects?

    I am a long time MB Looks user - not heavy dosages but I do find it easy and fast as it keeps you inside FCP and along with the 3-Way CC it was efficient.
    I am nearing an edit on a 80 minute documentary which involves going from color to clips converted to black & white and sepia tone for effect. I am thinking to use Color workflow for the entire color grade and effects.
    Does Color dispense the need for Looks altogether? I have used color a few times now but not on a complete feature length, so I would need to sharpen my knowledge.

    Jon Braeley wrote:
    Does Color dispense the need for Looks altogether? I have used color a few times now but not on a complete feature length, so I would need to sharpen my knowledge.
    Color, MB Looks, FCP's 3WCC are all arrows in our quiver. We don't need to give one up to use another.
    I'm working on a doc now (it's rendering out in Color as I type this) that has "Hero" shots being treated in MB Looks. But I use Color to even out all those Hero shots so the MBL settings I'm using will be applied consistently. But even then I find it useful to to precede MBL with a 3WCC so I can easily adjust the tonality, saturation, and color palette of the shot without having to step back into the MBL interface.
    I can definitely guarantee that I couldn't have graded this show in 2.5 days if I just kept myself to using only the FCP interface. Even with the prep time for the Color round-trip - I get better results faster...
    - pi

Maybe you are looking for