Adjust Date and time for all Photos in an event?

Would some one tell me how to adjust the date and time for all photos in an event. For some reason when I change the date, it only changes the first photo in the event and I am left with a range of dates in the event, but I would rather they all have the same date in the event. Any thoughts or ideas?

How are you selecting the photos and changing them? How much of a change are you trying to make? A total change of date and time or just a delta change either plus or minus?
Using the Photos->Adjust Date and Time... menu option will apply the time/date difference to all of the photos in the Event if you click on the Event icon in the Photos mode or the Event mode.

Similar Messages

Not allowed to change date and time for some photos; why?

I have some images that I scanned in of old photos. I'm trying to change the date and time and location to reflect the time the original photo was taken. I know how to do it in the menu system, but when I try to change the original data it tells me they are of a file type that won't allow this metadata to be changed. They are simple JPEG's so I'm not sure what the problem is. Do I need to convert it to some other format first to be able to do this? Any ideas would be helpful...

Hello Toran,
are trying to change the date and time of the versions only, or are you trying to change the date and time of the masters too? If you are using
Meta Data -> change date and time
deselect "also change master file", this causes the problem, the new Aperture version seems not to allow to change the date and time of masters.
There have been long discussions on this problem, see e.g. this thread; I do not know if somebody has found a solution by now,
Regards, Léonie

Set date and time for all macs in the network

Hi,
I need to set the time and date for all of our Macs in the network, I have tried to have a look at Workgroup manager but I can not see anything.
Any ideas?
Thanks in advance,

Once the ntp setting is initially loaded, it should not need to be changed. But you know that, of course.
If you're looking to automate ntp configuration as part of system imaging (SIU, InstaDMG, etc) and client set-up, then that's certainly possible; that sort of discussion is regular fodder on the Mac Enterprise mailing list. (Check the archives over there for some interesting discussions.) Here are some related discussions that might interest you, too:
http://www.afp548.com/forum/viewtopic.php?showtopic=21477
http://www.afp548.com/forum/viewtopic.php?showtopic=20328
Also see man systemsetup for some details.
$ /usr/sbin/systemsetup -getnetworktimeserver
Network Time Server: time.apple.com
$
And here's a slightly-dated intro to client management.

Aperture 3.0.3 Adjust Date and Time

Working on a batch (~3K) scanned images that all need to be adjusted for date and time, the adjustments and so forth. All notes below is with Master images.
My observations so far with the unpredictable "Adjust Date and Time" function, "D&T" hereafter and some suggestions on improving Aperture.
0. Always make sure that you start by "edit->deselect all" - even if nothing is selected.
APPLE: PLEASE MAKE IT SIMPLER TO SEE WHAT IS SELECTED (MASTERS, VERSIONS, etc).
1. Always use US language selection - Language selection seems to matter for D&T. I am from Denmark, living in US but often switch between US and DK language (to get some special characters). In Denmark we use dd-mmm-yyyy and in use we use mmm-dd-yyyy. When i use the danish locale with the "D&T" function Aperture D&T is totally unpredictable - so stick with US.
APPLE: PLEASE DONT BE TOO SMART BUT USE THE D&T FORMAT LISTED IN THE D&T DIALOG BOX
2. D&T time-shift does not work. Unfortunately this 'capability' cannot be disabled - Somehow Aperture check what the time was originally stamped on the image and use this for the new "D&T" - first i though that this was adjusting ~1 sec between images but it seems that Aperture do something like the following (sorry for my non-applescript'ish examples below)
newTime = "edit->adjust date and time"
foreach image do
set time to image.D&T.time
try() change image.D&T.time newTime+image.D&T.time
catch () newTime image.D&T.time
Not good as it time-shift from the original picture - if the time is good this is not a problem but if time (from the stamp) is off (like all of mine) most likely the time will get the date to wrap into the next day (or year if you got a bunch of images)..
APPLE: PLEASE ADD AN OPTION TO DISABLE TIME-SHIFT in D&T
3. Dont include DNG - Aperture cannot change the date for a dng and it seems to screw up the time-shift in "D&T" - i think the algorithm do something like
newD&T = "edit->adjust date and time"
for each image do
set D&T to image.D&T
try() change image.D&T to newD&T
catch() newD&T = image.D&T
The problem seems to be that when Aperture work on a image it cannot change it use this images (that it cannot change) D&T for the next images D&T, i got a bunch (a ton actually) of examples
1994
1994
2008.dng
2008
When using a different language locale it gets even worse.
APPLE: PLEASE DO NOT CHANGE THE D&T COUNTERS WHEN WORKING ON A FORMAT NOT (WELL) SUPPORTED.
4. Always check your trash for images - after i deleted projects (empty, no images) i have found images for those projects in the trash. Cannot explain why this is but i am happy that i checked the trash before emptying - put back works just fine.
I am currently using the following methodology for my scans.
1. load in all pics, create albums for years and projects for months - e.g. 1993.0201 <text>, 1998.0327 <text> and sort scans to the correct albums and projects
2. export each album as separate libraries, open library, fix D&Ts, places and faces. Exit, reopen and check trash for images that should not have been deleted. Clean trash, close.
- For faces i add a few pics' of recognizable folks - open faces and select from the many suggestions aperture offers - very fast.
3. Open or import library to master (my master got ~20K pics currently)
I am interested in learning if i am the 'only one' with Aperture D&T 'problems' or if i am using the tool incorrectly.
Kenneth

nathan:
What type of edit were you making. Have been trying to duplicate that and cannot. I've changed the date and selected the original file to be changed also. Then I edited the file by cropping, changing the exposure and shadows and saving. Both versions are still tiff files.
Now these are tiff files that I converted over from jpgs with Photoshop as my camera doesn't take tiffs. Don't know if that will make any difference.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Getting last login dates and times for graphical/xwindows logins?

Hi,
How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
Thanks,
Link.

Hi,
How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
Thanks,
Link.

Adjusting date and time does not work for pictures from one camera.

I have a set of pictures taken with a Casio EX-Z20 camera in my Aperture 2 library. Because the clock of this camera was off by a few hours I changed them all at once with the option "Adjust date and time...". This worked well and when I sorted the images from different cameras by date in Aperture they were in the order.
When exporting all the images as JPEG the images in the set from this camera was reset to it's original.
That was very strange, I decided to try and change the date of these images in the master files as well by checking the checkbox "Also change master files".
When I change the date from 15-10-2008 18:34:44 to 16-10-2008 10:34:44 (+16 hours) the date of the image changes to 16-10-08 01:36:43 GMT+02.00 (+9 hours, 1 minute, 59 seconds).
When I change the date from 16-10-08 01:36:43 to 16-10-2008 19:36:43 (+18 hours) it ends up as being 16-10-08 10:38:42 (+9 hours, 1 minute, 59 seconds)
When I change the date from 16-10-08 10:38:42 to 16-10-08 10:48:42 (+10 minutes) it ends up as 16-10-08 01:50:49 GMT+02:00 (-8 hours, 47 minutes, 7 seconds)
I have worked around this problem by adding some hours to the desired time and eventually got it about right, but this is still a very annoying problem. Has anyone else encountered it or know of a way to avoid it?

{quote:title=JohniBook wrote:}
Has anyone else encountered it or know of a way to avoid it?
{quote}
I certainly have had issues regarding wrong dates, time stamping and DNG's in Aperture. There have been posts here from others as well with the same kind of date problems.
I have reported the bug to Apple and hope for a solution to the issue in a near future.
Regards
Paul K

"Adjust Date and Time..." will convert your TIFFs to JPGs!!!

I wanted to let everyone know of a serious bug that I've been discussing in the following thread: [http://discussions.apple.com/thread.jspa?threadID=1315705&tstart=0].
Here's the bug. If you use the "Adjust Date and Time..." function on a TIFF file, and have iPhoto modify the original file, iPhoto will make the time adjustment, but it will *save a JPEG over your original TIFF, with the original .TIF name!!!*
Big nasty bug. After you do this function, you have lost all that lossless TIFF data since your pictures was overwritten by a lossy JPG!
nathan

nathan:
What type of edit were you making. Have been trying to duplicate that and cannot. I've changed the date and selected the original file to be changed also. Then I edited the file by cropping, changing the exposure and shadows and saving. Both versions are still tiff files.
Now these are tiff files that I converted over from jpgs with Photoshop as my camera doesn't take tiffs. Don't know if that will make any difference.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Change the date and time of a photo in iPhoto?

How can I change the date and time of a photo in iPhoto?

Use either the Adjust time and date command or batch change time and date command
Adjust is to fix incorrect times like wrong camera settings - batch change is to record a totally new time and date - typically for scanned photos
Select the photo(s) and use the appropriate command for your needs
LN

Reminder app not working correctly, issue started around Sept. 1,2014. Will not allow me to set date and time for a reminder.

Today I noticed an issue with my Reminder app on my IPhone 5s. Using OS 7.1.2. I called Apple, and the tech didn't know what he was doing and just trying different things.The reminder app will not let me set a date and time for reminder. Finally he escalated the call to a senior advisor who was rude, arrogant and unprofessional. He insisted the Reminder App was updated with the new update of IOS September/October 2013. Not true, the issue just started about 5 days ago August 31,2014. Now there is an additional reminder line for reminder entries that I have to use and have to transfer all my reminders manually from the other part of the app. The feature does exist; if I try to set a date and time for the reminder it appears for 1-2 seconds and then disappears.
Has anyone else noticed this issue?

He insisted the Reminder App was updated with the new update of IOS September/October 2013. Not true
Yes, it is true.
iOS 7 was released 18 Sep 2013. At this time, the Reminders app was updated (with most everything else).
the issue just started about 5 days ago August 31,2014.
Your issue just started but the app was not updated 5 days ago.
Now there is an additional reminder line for reminder entries that I have to use
I don’t understand what this means...
Open Reminders, type the reminder, tap the i at the end, turn on Remind me on a day and enter the date/time.

Report the date and time of all the systems reporting to sccm

Hi,
We have a requirement to report the date and time of all the systems reporting to SCCMnot sure if this is possible.
Appreciate any help regarding this.
Thanks

Not sure I understand what you are asking. Do you want to get the date/time for the last hardware inventory, heartbeat discovery etc?
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

How can I print the date and time in a photo from iPhoto

How can I print the date and time in a photo from iPhoto

You want to print them on their own? Can't be done. WIth the photo? Install this
http://www.iborderfx.com/iborderfx/

Printing the date and time on a photo

The date and time that the photo was taken showes up but how do I get it to print on my photos?

You can print the date just below the photo on a printout by using 'Contact Sheet' option while printing the photo through Photoshop Album Starter Edition.

SCCM 2012 R2 changing date and time for patching software update groups

I recieve this error when changing date and time for software update group. worked fine yesterday before patches to the server were applied last night. we removed patches but still get error below. Any help would be great.
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Property array AssignedCIs exceeded the max allowed";
ErrorCode = 1078462259;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspupdatesassignment.cpp";
Line = 94;
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
System.Management.ManagementException
Generic failure
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger

no it is the final version... is working today after cleaning up database... is working now...thanks
Hello Robert,
would you please give some more informations, as I have the same issue and don't get what you mean bye "cleaning up databases".
Regards ooGDoo
ooGDoo

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

Not able to adjust date and time - format does not permit

Hello,
I just scanned one old photo as a JPG and then imported it to Aperture 2, I renamed the file 1976-07-01_01.jpg based on the date the pic was taken. Then I tried to adjust the date and time in Aperture but got this error window:
"Unable to adjust master file
Aperture was not able to adjust the date and time of the master file "pic.jpg" because it has a format that does not permit date modification."
What next?

I am having a similar problem. The time is off by 12 hours exactly (ahead). When I touch date and time, screen goes black for less than a second and then reverts to main screen with all of the icons. I have first generation touch and just noticed this problem. All of the software is up to date. Any one know of a fix for this?

Adjust Date and time for all Photos in an event?

Similar Messages

Maybe you are looking for