Adjust density on HP Laserjet P2015dn printer

Hello,
I use HP Laserjet P2015dn printer with Windows 7 Ultimate. I would like to ask you how to adjust the density of printing. I couldn't find any similar option in the printer's properties.
Thanks.

Stasko,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

HP LaserJet P2015dn printer driver missing .To implement in network.

Hi All,
Recently i had format my SUSE linux PC which is Motherboard problem.
My printer was connected in that PC only.
After changing the Motherboard ,then i connect the printer(HP LaserJet P2015dn ).i can able to access.but in our network nobody able to access.
Then i searched last one week for driver for corresponding HP LaserJet P2015dn printer.It was not fixing my problem.
Eventhough i can't find my printer IP address.i heard that while putting driver software only, it will ask the new IP address.
i gave new IP also but it not pinging .
My question is:
1.Please provide the link for driver(HP LaserJet P2015dn) and how to install.
2.provide the steps to find the old IP address for this printer.
Thanks in advance,
Regards,
Jp21

Hi jp21,
I hate to hear you are having issues. Please Click Here for available software for this unit. Due to the variety of Linux systems and supported printers for those types of systems, you may be redirected to other sites. For this type of OS you may need to download an updated version of HPLIP or install it if missing. Please Click Here to determine if you need to install or update HPLIP. Please see the steps below to navigate previous software link and confirm the current IP address. If you are not able to ping the printer's current IP address skip to the user guide link to troubleshoot networking issues.
From driver/software page:
1. Click Linux
2. Scroll down and click obtain software(under pink band)
3. Click the link in middle of page labeled, 'Download Linux drivers from HP Linux Imaging and Printing Web site'
4. Click hplip link(this will redirect you to the HPLIP download)
5. Determine if HPLIP download/update is required from link above
6. If required click download
7. Answer initial installation questions
8. Follow prompts to install HPLIP and printer
Confirm IP address:
1. From product control panel-print configuration page
2. Press and hold Go button for 5 seconds
3. Configuration page will print
Please Click Here for the printer user guide. It contains useful information for solving network issues.
Note: There are other printer setup tools for Linux systems such as CUPS or KDE wizard. These are not affiliated with HP, however they may help resolve your issue. HP and I are not responsible for any damage caused by the use of these tools.
The following 3rd party website regarding cup filters may be useful however it is not affiliated with HP-HP and I are not responsible for any damage caused by the use of this website.
Click Here
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

LaserJet P2015DN Printing Is Very Faint. Is This Fixable w/Parts?

I ask this cause back in the old days a laserjet was something that deserved a new fuser, fuser roller or whatever. No matter what printing options I use, the printing is very faint on this printer. I have a second one that prints properly. I see online that there is no support available for this model any more. Does that mean there are no parts either? I guess for the price of a new replacement, it may not be worth dealing with it. But, I've got a dual paper tray version DN. I'd just as soon keep this one if I can.
Any help is appreciated. TIA.

Greetings,
I'm sorry to hear your nearly 15 year old printer is squeaking so loudly. I helped develop that printer and it’s always sad to hear that one is failing a customer. I fear I won't be able to help you root cause the problem, but I’ll certainly try. Here are some things to try::
1) Try installing a different toner cartridge. Sometimes the drum / seals / etc can make a noise.
2) Try isolating the noise to a component in the printer. Take a picture of the component and post it.
3) As I recall, the 5m printer has a replaceable fuser. It’s possible that the gears / rollers are worn to the point of making noise.
4) Try searching the internet for solutions to squeaks of other LaserJet models such as the LaserJet 4, 4+, 4000, 4050
For instance, here’s a link you might try: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl12433&prodTypeId=18972&pro...
Good luck!
--Phred
An HP employee

Printing problems with HP Laserjet P2015DN

We are using SAP Business One software and are trying to print Delivery Slips using HP Laserjet P2015DN. The problem we have is when we use this printer it prints boxes around the entry fields. I have tried several drivers but no luck. Any help would be greatly appreciated. I am using a print server with 2003 opreating system
Thanks Jim Dyer

JIm,
When you say it prints boxes around the entry fields, do you mean for all reports? If only selected reports have the boxes, check the border for entry fields
Thanks,
Gordon

Wireless print server for HP LaserJet P2015dn

What hardware/software do I need to enable an HP Laserjet P2015dn to communicate with a NETGEAR WNDR3700 N600 Wireless Dual Band Gigabit Router?

jbarbercavu wrote:
What hardware/software do I need to enable an HP Laserjet P2015dn to communicate with a NETGEAR WNDR3700 N600 Wireless Dual Band Gigabit Router?

HP LaserJet P2015DN on Windows XP 32bit SP3. Ip address auto-configuring?

Good morning.
Sometime my LaserJet P2015DN does not work. If I go to see Network configuration, in "IP address" the value is "Configuring", but te printer is set to manual ip. Actually mi configuration of ip address is:
Host Name: NPI140860
Domain Name: My_Domain
Bonjour printer name: HP LaserJet P2051 Series (140860)
IP address: Configuring <-------- ??????????????
Subnet Mask: 255.255.255.0
Default gateway: 192.0.0.4
IP configured by: Manual
WINS server: 192.0.0.4

Hi nanopepe;
Welcome to the community;
I hope you are doing well and having a great day;
Your HP LaserJet P2015DN is a commercial product. I will suggest posting in the forum for HP Business as well Support for yet a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Missing auto duplex option in Win 7 for LaserJet P2015dn

I moved my Laserjet P2015dn from a Windows XP to a Windows 7 machine. Now I cannot find the option to use the automated duplexing. The only thing I can find is an option to mannually duplex.
This question was solved.
View Solution.

1. Click on the Start button.
2. Click on Devices/Printers.
3. Once the windows screen has popped up....scroll down to your Printers/Faxes section.
4. Right click on the P2015 printer icon.
5. In the drop down menu, select "Printer Properties"
6. Once the Printer Properties dialog box has opened, click on the device settings tab.
7. Scroll down to the Duplex Unit line and make sure this is set to installed. If not, use the pull down tab and change to install. (see below pic.).
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Enabling the printing function of your HP Laserjet M1005 printer

If you wonder how to install the printing function of your HP Laserjet M1005 printer, here is listed a bullet list of the actions. This has just been tested out thanks to the Support team from Germany
Go to the page http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1 839459&lang=en&cc=us&prodTypeId=18972&prodSeriesId=1839458&taskId=135 and select the link Mac OS X; download the link "HP LaserJet M1005 MFP Mac OS X Full Software Solution"
Use the opportunity to update your printer firmware by selecting the link "Printer Firmware Update"
Shutdown your Mac and start up in the safe boot mode (should be the combined keyboard shift and power on/off - refer to the Apple web site for details)
Run the downloaded SW package listed in the step 1
Go and select under system settings printer and fax, follow the step-by-step instructions to have a printer installed
Shutdown your Mac and start up again in the safe boot mode
Connect your printer and the printer SW installation message shoud pop up requesting you to install it
SW download process should appear and run
Be aware that just the printing function will be available - no scanning function so far
For those who may be interested in knowing why safe boot mode: it is likelz that my anti-virus SW Kaspersky denied the installation.
Continue to enjoy your HP Laserjet M1005 printer

"For those who may be interested in knowing why safe boot mode: it is likelz that my anti-virus SW Kaspersky denied the installation."
You should read this:
http://www.reedcorner.net/mmg-antivirus/

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP LaserJet 4300 prints gibberish for one user, but prints OK for all others on a Windows 7 32-bit

HP LaserJet 4300 printer installed via LPT1 using Universal Print Driver v5.2.6.9321 on an HP 8100 desktop running Windows 7 Enterprise SP1 32-bit.
For one particular user, this printer prints gibberish no matter what type of document she attempts to print.
Not sure when the problem began, the user uses a network printer to work around this issue. She can print to any of the other HP printers on our network OK, including another 4300 down the hall.
Anyone else can log on and print the same documents OK on this desktop using this printer.
Have tried rebooting the HP 8100 and power cycled off/on the 4300. Also uninstalled and re-installed the 4300.
I have updated the firmware on this 4300.
Changing the print processor in the printer properties did not help either.
Virus and malware scans have not detected any issues.
Any advice for this issue would be greatly appreciated.
This question was solved.
View Solution.

Hi MDOTd5-247,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Printing problem with HP Color Laserjet 3000 printer

I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6 with SPAD with device type "HPLJ4 : HP Laserjet 4 series PCL and access method = L: Print Locally Using LP
At HPUX level printer in configured with proper driver also.
When I print from SAP, I get following error
"Invalid option, Please refer to MAN page for valid options" as attached
Other then above line , nothing else comes
Please help,
Al Mamun

Hi,
Make a try using the device type HKSAPWIN and the access method is front end prinitng.
Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
Regards,
Vamshi.

LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can I determine how many pages my Laserjet 1020 printer has printed in its lifetime?

I am trying to be proactive in determining whether I need to plan to replace my Laserjet 1020 printer. I know that I have seen printouts from resellers/refurbishers which show the number of pages that a printer has printed in its lifetime. I am just trying to figure out how to get this information from my printer so that I can see how much life it has left. Can anyone tell me how to generate this report?
Thanks!!
This question was solved.
View Solution.

Hi davesuff,
You should be able to view the pages printed by going into the driver. Let me know if this works?
1. Printing Preferences
2. Basics tab
3. click on About.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HT1338 i can't attach my hp color laserjet cp1215 printer.

i can't attach my hp color laserjet cp1215 printer.

Adhvaresh,
"attach" is a word we usually use for plugging in cables - but I don't think that is what you mean.
If you want a driver for that model laserjet, I suggest you use the foo2hp set of drivers. Install Foomatic and ghostscript from here:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic
Then, install foo2HP from:
http://foo2hp.rkkda.com/

HP Color LaserJet 1600 Printer

I really love my HP Color LaserJet 1600 printer but haven't been able to successfully install it in my brand new MacBook Air 1.7 despite several attempts.
I have downloaded the correct Firmware Upgrade 20120928 v2.4 from HP Drivers web page. Unlocked RFU to ON position and installed the firmware. Added HP Color LaserJet 1600 Printer via USB, as required and my MacBook correctly identifies it as such. Though the driver I have chosen is HP Color LaserJet 2605 since the one for 1600 is not available in the database. The printer responds positively during the upgrade but later does not print. I can see the print command being transmitted to the printer but it stays dead.
Please help and let me know stepwise how to do it correctly.

Just upgraded my printer to HP Color LaserJet Pro 200 M251nw.... Problem solved.

Adjust density on HP Laserjet P2015dn printer

Similar Messages

Maybe you are looking for