Adjust Image Problem - Image Changes when Mouse Click is Released.

I love the fact that images can be adjusted after insertion into a page (Things like brightness, contrast etc). The problem I have which is very frustrating is that while any control on the Adjust Image panel is selected and being edited (click and hold mouse button to move a slider), the images' contrast and brightness change (perhaps as if to indicate selection?). This is inherently a problem since it's these very characteristics you're trying to edit. So you adjust the image to your liking but when you release the mouse button, then image then suddenly changes and is no longer the way you want it. Anyone else seen this problem and have any helpful suggestions?

I have been trying to replicate your issue using different format images..but I did not succeed.
If its not images and types that cause the problem, then the inference is that it the application.
The usual advice... unless you want to contact tech support and present your problem to them - is to uninstall iBA with Appdelete or similar rather than dragged to the trash, and then do a reinstall.
This presupposes you saved everything/copies etc,.
BTW, I seldom use the various sliders, with practice using the LEVELS can be more effective, have you tried this option?

Similar Messages

:system.cursor_block value does not change when mouse click

Form created with Forms version 6.0.8.8.0. Consists of a control block that has the toolbar buttons, a filter control block that contains item, and a data block. The filter control block and data block are on a tabbed canvas. There are 3 tabs with corresponding filter control block and data block on each.After the data block is queried, code sets the navigation to the control block with the go_item built-in. The user would use a mouse click on the filter control block on one of the tabs to activate an LOV, code is in a generic when-mouse-click trigger that will determine the item focus with the value in the system variable :system.cursor_block. Works for the first tab. Does not work for 2nd or 3rd tab. On-error trigger does not capture any error. Values for :system.cursor_block for tab 1 show that value before mouse click is 'control.detail' and after mouse click is 'filter.a'. For tabs 2 and 3 the value before mouse lick is 'control.detail' and after mouse click is 'control.detail' instead of 'fiter.b' or 'filter.c'. Verified that the 3 filter blocks are identical. Can anyone shed some light on this anomoly? I have been looking for this solution (many different iterations and changes to trap it) for too long.

:System.Cursor_Block reports the name of a block, NOT a BlockName.ItemName.
Use :System.Trigger_Item with your mouse click, or :System.Cursor_Item.

I inserted a HTML5 video in page, when I test it in a Browser, I see the poster image and controls, But when I click play button the video goes white, slider moves like its playing, but just white picture. There was no audio included in video. Please help

I inserted a HTML5 video in page, when I test it in a Browser, I see the poster image and controls, But when I click play button the video goes white, slider moves like its playing, but just white picture. There was no audio included in video. Please help

Without a link, it's anybody's guess.
It could be a problem the video rendering itself. Which software did you use?
Did you export to the 3 file types -- MP4, OGG and WEBM to support all browsers?
Does your web server support those 3 MIME file types?
Nancy O.

COMMIT_FOARM IS NOT WORKING INSIDE THE WHEN-MOUSE-CLICK

Dear friends
I have following script in when-mouse-click trigger
BEGIN
IF NOT Form_Success THEN
Bell;
RAISE Form_Trigger_Failure;
END IF;
IF :System.Form_Status = 'CHANGED' THEN
IF :LOCK_FLAG = 1 THEN
UPDATE PROJ.IM_REQUEST_HEADER
     SET LOCK_FLAG = 1
     WHERE DOC_CODE = :DOC_CODE ;
     SHOW_MESSAGE('DOCUMENT CODE -1'|| ' '||:DOC_CODE);
     SHOW_MESSAGE('LOCK FLAG -1'|| ' '||:LOCK_FLAG);
     Commit_Form;
     MESSAGE('The Record have been changed -1 ');
ELSE
     UPDATE PROJ.IM_REQUEST_HEADER
     SET LOCK_FLAG = 0
     WHERE DOC_CODE = :DOC_CODE ;
     Commit_Form;
     MESSAGE('The Record have been changed - 2');
END IF;
ELSIF :System.Form_Status <> 'QUERY' THEN
Message('An error prevented your changes from being
committed.');
Bell;
RAISE Form_Trigger_Failure;
END IF;
END;
Note :
The above trigger is attached to this field LOCK_FLAG and the item type of LOCK_FLAG is check box in the form and the property of the LOCK_FLAG
is site as the following :
database item = NO , and the property of the blcok IM_REQUEST_HEADER is site as the following :
database data block = NO
and my problem is when i change the value of LOCK_FLAG is not executting the update statement .
waiting for your valuable answer in details thank in advance for your cooperation.
best regards
jamil alshaibani

Dear Wilfred
Thank you very much for your cooperation, yes when I change the “Database data block “ property to no, it works, as I wanted to be.
Notes about my application:
In my program I provide the store keeper query screen, he can check the orders and lock the specific order by clicking on the LOCK_FLAG field, so after he locked the field the requester user can not change his order content if it is locked by the store keeper
And the way I was trying to do it ,by query the data from      IM_REQUEST_HEADER Table which is the Order table which is the header table ,the form is displaying doc_code ,doc_date ,lock_flag,and the order store name ,and I provide him a report on the same form that he can see the details of the order items ,and all the field properties set to no, that is update allowed to no ,insert allowed set to no, but the field lock_flag property set as update allowed to yes and insert allowed set to yes
and I would like to now how it was displaying this message
ORA-01400 cannot insert NULL INTO “PROJ”.IM_REQUEST_HEADER”.DOC_CODE
And I was not inserting, I was just updating the lock_flag by the above update statement.
Best regards
Jamil Alshaibani

WHEN-MOUSE-CLICK for a display item does not fire on the web

Resending as there were no responses............
Regards,Bala.
Bala (guest) wrote:
: Hi guys,: 1. Does WHEN-MOUSE-CLICK fire on Display Item or on
a Button in
: Web Forms (not in a client/Server environment) ? We had it
: working in Forms 5.0, but right now in 6.0 it doesnt ? In 6.0,
: it works fine in Client/Server environment, but definitely not
: in Web environment.
: 2. Again, in our app. we have set no bevel for the display
: items, but when we run it on the web, it comes with a bevel
: (this does not happen in Client/Server). Is this common or is
it
: a known bug in 6.0 ?
: 3. How to change Fonts for Web Deployment. Currently I guess
it
: takes Dialog as the default with the point size of 900 (in
Java
: terms). I tried modifying the registry.dat to the following:
: default.fontMap.defaultFontname=SansSerif:
default.fontMap.defaultSize=900: OR
: default.fontMap.defaultFontname=Ms Sans Serif:
default.fontMap.defaultSize=900
: and found no changes at runtime on the Web.
: Any help on these issues, will really be appreciated.
: Thanks,
: Bala
null

Dear friend
i have the same problem when ever u can solve this probelm pls
inform me as well mean while i am trying to reslove it as well if
there is any sucess i ll inform u.
mobeen
Bala (guest) wrote:
: Resending as there were no responses............
: Regards,Bala.
: Bala (guest) wrote:
: : Hi guys,: 1. Does WHEN-MOUSE-CLICK fire on Display Item or on
: a Button in
: : Web Forms (not in a client/Server environment) ? We had it
: : working in Forms 5.0, but right now in 6.0 it doesnt ? In
6.0,
: : it works fine in Client/Server environment, but definitely
not
: : in Web environment.
: : 2. Again, in our app. we have set no bevel for the display
: : items, but when we run it on the web, it comes with a bevel
: : (this does not happen in Client/Server). Is this common or is
: it
: : a known bug in 6.0 ?
: : 3. How to change Fonts for Web Deployment. Currently I guess
: it
: : takes Dialog as the default with the point size of 900 (in
: Java
: : terms). I tried modifying the registry.dat to the following:
: : default.fontMap.defaultFontname=SansSerif:
: default.fontMap.defaultSize=900: OR
: : default.fontMap.defaultFontname=Ms Sans Serif:
: default.fontMap.defaultSize=900
: : and found no changes at runtime on the Web.
: : Any help on these issues, will really be appreciated.
: : Thanks,
: : Bala
null

When-Mouse-Click does not fire if When-new-item-instance exists

We are using Forms 6i Patch 12.
The When-Mouse-Click trigger (at block level) is not getting fired when a When-new-item-instance trigger exists on a given item on which mouse is clicked.
We need to synchronize keyboard and mouse events such that if the validation on certain key items fails, the cursor should go to one of the specified items as per the validation rules.
The validation rules are different on leaving from different items. Complex validation rules require cursor to go to a different item than the current item on which the validation fires.
Since go_item cannot be used in when-validate-item, we are using a combination of key-next-item and when-mouse-click.
But, this strategy seems to fail if mouse is clicked over an item having a when-new-item-instance trigger.
Also, we need the When-mouse-click trigger to fire before When-new-item-instance.
Any pointers to solving the firing of trigger or strategy will be appreciated!
Regards,
Sanjiv

This solution we have tried and it works also.
However, we end up in another problem in the form. For overall picture, please see my latest post for "Forms Valid status" at Forms Valid status
Regards,
Sanjiv

Open Form not working when called from When-Mouse-Click

In our application to navigate to other forms we have created a feature where user selects the Forms from a LOV, the form id is returned to the text item and user needs to click the text item.....In the text item the Open form command is given
This is not working
The form builder throws an error
Frm 92100 Connection interupted
what could be the reason

Code written in When-Mouse-click
for item :boo_toolblk.nbt_nxtscr which contains the form id
DECLARE
p_name_id PARAMLIST;
lv_param_name VARCHAR2(8):= :boo_toolblk.nbt_nxtscr;
lf_next_form_id FORMMODULE;
BEGIN
Clear_Item;
/*Create a parameter list named 'TEMPLT_PARAM'. First
** make sure the list does not already exist, then
** attempt to create a new list*/
IF not Id_Null(Get_Parameter_List('TEMPLT_PARAM'))/*Returns a BOOLEAN value if the object ID is available*/
THEN Destroy_Parameter_List('TEMPLT_PARAM');
END IF;
p_name_id:= Create_Parameter_List('TEMPLT_PARAM');
/*Add a value parameter to an existing Parameter
** List */
Add_Parameter(p_name_id,'templt_nxtscr',TEXT_PARAMETER,lv_param_name);
Go_Block(Get_Form_Property(:system.current_form,FIRST_NAVIGATION_BLOCK));
lf_next_form_id := FIND_FORM(lv_param_name);
:PARAMETER.next_form := lv_param_name;
IF lf_next_form_id.id is not null
THEN
Close_form(lf_next_form_id);
END IF;
Add_parameter(p_name_id,'previous_form',TEXT_PARAMETER,:SYSTEM.CURRENT_FORM);
/* opens another form*/
Open_Form(lv_param_name,ACTIVATE,NO_SESSION,SHARE_LIBRARY_DATA,p_name_id);
EXCEPTION
WHEN FORM_TRIGGER_FAILURE
THEN RAISE FORM_TRIGGER_FAILURE;
WHEN OTHERS
THEN RAISE FORM_TRIGGER_FAILURE;
END;
Error :-
Frm-92100 : Your Connection to the Server was Interrupted
This may be the result of a networn error or a failure on the server.
You will need to re-establish

Exec utl_mail.send when mouse click

Hi,
I have a question,
I want to exceute the exec utl_mail.send inside when mouse click i a form. how can i do that?
Thanks and regards

The ULT_MAIL, package is a utility for managing email which includes commonly used email features, such as CC, BCC etc.
To install UTL_MAIL
Method 1:
sqlplus sys/<pwd>@db_sid
SQL> @ORACLE_HOME/rdbms/admin/utlmail.sql
SQL> @ORACLE_HOME/rdbms/admin/prvtmail.plb
you define SMTP_OUT_SERVER parameter in the init.ora rdbms initialization file. However , if SMTP_OUT_SERVER is not define, this invoke a default of DB_DOMAIN which is guaranteed to be defined to perform appropriately.
Method 2:
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
Connected as SYS
SQL> grant execute on utl_mail to public;
Grant succeeded
SQL> create or replace public synonym utl_mail for sys.utl_mail;
Synonym created
SQL> CREATE OR REPLACE FUNCTION SEND_MAIL
(pIssuer IN VARCHAR2,
pReceiver IN VARCHAR2,
pSender IN VARCHAR2,
pSubject IN VARCHAR2,
pMessage IN VARCHAR2) RETURN VARCHAR2 IS
c utl_smtp.connection;
respuesta utl_smtp.reply;
pServer VARCHAR2(50) := 'SERVER';
BEGIN
-- Open the connection to the Server-mail
c: = utl_smtp.open_connection (pserver);
answer: = utl_smtp.helo (c, pServer);
- Starts the Issuer mail.
answer: = utl_smtp.mail (c, pSender);
- Start the receiver
answer: = utl_smtp.rcpt (c, pReceiver);
answer: = utl_smtp.open_data (c);
- Write the header of the e-mail
utl_smtp.write_data (c, 'From:' | | pIssuer | | utl_tcp.CRLF);
utl_smtp.write_data (c, 'To:' | | pReceiver | | utl_tcp.CRLF);
- Write the Subject
utl_smtp.write_data (c, 'Subject:' | | pSubject | | utl_tcp.CRLF);
- Write the text of the Message.
utl_smtp.write_data (c, utl_tcp.CRLF | | pMessage);
utl_smtp.write_data (c, utl_tcp.CRLF | |'.');
answer: = utl_smtp.close_data (c);
- Close connection
answer: = utl_smtp.quit (c);
RETURN '0 ';
EXCEPTION
Utl_smtp.permanent_error THEN WHEN OR utl_smtp.transient_error
utl_smtp.quit (c);
RETURN SQLERRM;
- raise_application_error (-20000,
- 'Sending email failed, returning the following error:' | | SQLERRM);
WHEN OTHERS THEN
RETURN SQLERRM;
END;

When-mouse-click trigger is not working

Hi,
My forms version is 10g.
I've a black level and item level when-mouse-click trigger.
There is some code inside that which is not being executed.
To test, i simply printed a hello message inside the trigger's code.
Even hello is not being displayed.
Can anyone please help me in why this trigger is not working.
Navnit

You have some other issues going on if you don't see anything from a when-mouse-click trigger.
First of all, are you spelling the trigger using a dash or underscore? WHEN-MOUSE-CLICK will run, but WHEN_MOUSE_CLICK will not.
Have you set :SYSTEM.Message_Level to some value above zero in the form? If so, set it back to zero.
On what object are you trying to click? Is this causing navigation? Navigation may cause validation to run, which may fail, which may prevent the navigation, which may prevent your when-mouse-click from running.
And last, are you sure you are running the currently compiled fmx version of your form?
When nothing works, you need to back up and start finding out what DOES work first.

Passing parameter through when mouse click trigger

I have a detail block.This block fetching multiple records.My query is how can i pass parameter though WMC trigger.
My details block displaying data from 4 tables.
When i click on any field all the data on that row must be my parameters.

In first form in when mouse click trigger:
SELECT xyz
INTO :GLOBAL.xyz,
FROM abc
WHERE v.po_no = :SYSTEM.MOUSE_ITEM
AND IMT21_SIT.C_SIT_NO = IMT22_RECT_HD.C_SIT_NO;
EXCEPTION WHEN NO_DATA_FOUND THEN
MESSAGE('PLEASE CLICK ON PO NO');
logout;
logon('abc','[email protected]');
open_form ('C:\CUSTOMER_SERVICES\SUPL_FAS');
in second form in when new form instance trigger:
block_name.field_name := :GLOBAL.xyz;
it show error..........

When-mouse-click trigger

hello every one
i put list item on tabular text item when i use when-mouse-click trigger on list item it dosen't fire
can any one help me.

this is my trigger
for i in 1..Get_list_element_count('l1') loop
     if :l1=get_list_element_value('l1',i) then
:lname:=GET_LIST_ELEMENT_LABEL('l1',i);
end if;
end loop;
if :report_name in('C','B','A') then
     :branch_code:=substr(:l1,1,3);
     :code:=substr(:l1,4);
     go_item('code');
else
     :client_branch_code:=substr(:l1,1,3);
     :client_code:=substr(:l1,4);
     go_item('client_code');
     end if;

Fullscreen disable page change on mouse-click

Hey there!
I created a form that automatically switches to full screen mode.
If users now click into the form (not directly on a checkbox etc.) the next page pops up. Is it possible to deactivate page change on mouse-click?
Thanks in advance!

Hi,
There is an AcroForm script for turning automatic page advancement OFF:
app.fs.clickAdvances = false;
I suspect that this can be translated to XFA javascript "as is", but it will be a while before I can check.
Have a go and maybe someone may have the solution as well.
I will post back later if I get in working in LC Designer.
Good luck,
Niall

How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

zedzed,
Here's another thought.
Navigate to HD > Users > Library > Safari: Make a duplicate of History.plist.
To duplicate the file, click once to highlight it. Press the Command + D keys.
Drag the History,plist copy file to the Desktop.
Highlight it. Press the Command + I keys, to get info.
Change Open With to TextEdit.
When you open the file in TextEdit, it will be difficult to read, but you will be able to pick out some sites.
ali b

How modificate this script from mouse click to release

how modificate this script from mouse click to release
package
* A Colorful Fireworks Demonstration in Actionscript 3
* from shinedraw.com
import flash.events.MouseEvent;
import flash.system.ApplicationDomain;
import flash.events.Event;
import flash.display.MovieClip;
import com.shinedraw.effects.ColorfulFireworks;
public class Document extends MovieClip{
private var _colorfulFireworks : ColorfulFireworks;
public function Document(){
this.addEventListener(Event.ADDED_TO_STAGE, on_added_to_stage);
private function on_added_to_stage(e : Event):void{
// place the object to the stage
_colorfulFireworks = new ColorfulFireworks();
addChild(_colorfulFireworks);
// add the cover to save CPU time
var coverClass : Class = ApplicationDomain.currentDomain.getDefinition("Cover") as Class;
var cover : MovieClip = new coverClass();
addChild(cover);
cover.addEventListener(MouseEvent.CLICK, on_cover_click);
// remove the cover after click
private function on_cover_click(e:MouseEvent):void{
var cover:MovieClip = e.target as MovieClip;
removeChild(cover);
_colorfulFireworks.start();

solved close pls

Why can't I get the image to view larger when you click on a thumbnail?

I thought that there was a way to have the image open up larger in a new little window when you click the thumbnail on a photos page....when I click a thumbnail on my photos page it takes me right to slideshow view and the images are displayed too small to see fine detail (I am a retoucher, so my clients need to be able to see hi res images) I can't find a way to change the size of the slideshow images or to get my thumbnails to click open to a hi res version in a new window. The only solution I can think of is to use a blank template page, make each small image a link to a hidden page with the image at hi resolution....but this would take forever and I would have a gazillion pages on my site that way. Any idea how to get around this. Seems like the older version of iweb didn't have this problem...????
(for an example of what I mean, my site: http://www.katesilsby.com (retouch page) and what old iweb did and what I want to happen: http://web.mac.com/vogier/iWeb/vivian%20ogier/wardrobe.html

(for an example of what I mean, my site: http://www.katesilsby.com (retouch page) and what old iweb did and what I want to happen: http://web.mac.com/vogier/iWeb/vivian%20ogier/wardrobe.html
iWeb2 photos page is completely different from that of iWeb1.
iWeb2 photos page can be retro back to iWeb1, but not without major javascript coding.
or using completely different previewing method for larger image, example: http://hdl.50webs.com/Lytebox/Photos.html

Adjust Image Problem - Image Changes when Mouse Click is Released.

Similar Messages

Maybe you are looking for