Adjust Image window disappeared

I have a Macbook - it looks like the Adjust Image Window for Keynote is to the left or right of the screen beyond view. How do I get it back?
cp

My inspector window was completely hidden with the additional monitor in full resolution, just like You describe it- funnily enough not even restarting the program/computer helped getting the window back in range
I found the ultimate help: with a second monitor (I use a laptop, so one is always in the go):
- switch the display settings to "synchronize" and "attach" the additional monitor on the edge the inspector is hiding at (detectable by a little stripe that disappears when You push the inspector button- it should appear again so You can move it to where it belongs... thanks Fatih!

Similar Messages

Cropping question: image window disappears

Lately, when click after cropping an image in CS5 the image window disappears.
Rashid Arshed

You probably have some values entered in the width, height or resolution fields.
With the crop tool selected, either click on the Clear button or right click on the Crop icon in the tool options bar and select Reset Tool.

Adjust Image in photo grid or album?

How do I do this? I need to make image adjustments to photos I have in a photo page. I click on the image in the grid, but the Adjust Image window goes grey and I can't make any adjustments. What gives?

Those adjustments would have to be made prior to importing them.
Photo's in regular pages can be adjusted.
From the help menu:
NOTE: You can’t use the Adjust Image window to modify photos in a photo grid (on a Photos or My Albums template).

Trouble: absolute center background image to adjust when window size adjusts

Hello DW experts!
I would really appreciate some help in getting my background image to be perfectly centered, and then adjust to always be in the center when the window size is adjusted. Here is an example of what I am looking for:
[http://www.wpdfd.com/editorial/thebox/deadcentre4.html | http://www.wpdfd.com/editorial/thebox/deadcentre4.html]   I have searched and found a lot of resources online, and I have tried there different options (i.e. background: cover, absolute, z index etc.). Here is a link to the homepage, goal is for the words Apex to show up in the center. It does not only if viewed on a large monitor. Goal is if the monitor is smaller or the person adjusts the window for the word Apex to adjust and remain as centered as possible. There will be content covering it on some pages so it does not have to be perfect.
[http://sellurownhouse.com/ | http://sellurownhouse.com/]    Thanks in advance for any help!
body {
background-color: #000;
margin: auto;
background-image: url(images/wallpaperx.jpg);

body {
     width: 980px; /**adjust as req'd**/
     margin: 0 auto; /** with width, this is centered on screen**/
     background: #000 url(your_background.jpg) no-repeat center center;
Nancy O.

In my itunes tab is images / photo disappeared. . can not get it back, so now I can not get pictures on my iphone??? I do not want to use the photo stream. there are others who have experienced this tab disappears

in my itunes tab is images / photo disappeared. . can not get it back, so now I can not get pictures on my iphone??? I do not want to use the photo stream. there are others who have experienced this tab disappears

Make the iTunes window wider.
It is on the far right.

A few image files disappeared: can't be re-imported from backup

There are at least a 4 dozen pictures imported into LR 5.x last September that now cannot be searched and which are not in the dated folder where they should be - even if searched in Windows Explorer. It's part of an event, and it appears to be all those on one card from one body. I remember seeing these images in the Library module at the time. No Previews with question marks.
If I go to the duplicated import created that day I find the "missing" images in the folder created at that time. Yea Adobe for creating the easy back-up for importing. In this backup folder the images can be searched and opened in either Windows Explorer or a viewer like FastStone. . If I put the files into the date-organized database folder (to "Synchronize" in the main directory) LR says it cannot import them as they are already part of the database. I tried copying these files in Explorer to a different hard drive and tried importing again: no help.
How can I convince LR that these need to be re-imported? More importantly, can anyone offer a scenario by which these image files disappeared from the disk and didn't leave a preview with a question mark? I didn't actually do any work (Dev module) that I remember on these. I certainly can go through with Bridge and batch rename this little set and present them again as an import request. But what causes something to drop out of the DB and disappear as a file? Obviously some kind of operator error is the most likely, I understand.
Deleting all Previews? Seems like that would make the machine work for hours to redo Previews for 90,000 pix.

Thanks for the suggestions (and warnings). I am pretty experienced with Lightroom and know the structure behind it. What was weird here was that when I try to bring one of the images back in through Synch or Import, says "It's already part of the database" BUT when searching for the image by file name LR finds others that share the same file number (not strange) but NOT the image I want (strange). This search was performed at the root of the file/folder structure, so should be looking into every folder in the database. An Explorer search shows that the image is no longer in the database folders. It is only found in the "Backup" folders created by LR when ingesting the card at the original import.
OK, so use the OS to move some of the files (12) back "inside" the folder, click Synch folder and it tells me there are 12 new photos. So far so good. BUT -- although they are now "there" in the folder and re-imported they still do not show up in the Library thumbnail view and can't be searched in Lightroom (by file name). The 12 didn't show up on a import screen with one lone PS image in that batch that was newly created this afternoon and DID show as a new import. I expected to see the 12 on that screen.
To answer one question offered today: No, the images do not show in the Develop module.
So something tells Lightroom these are not new and that they are aready there. However, not searchable.
Next step changing the names of the offending file, like appending a letter. See if that makes them look "new".
I think I can fix this as long as I have to original CR2 files unprocessed, which thankfully, I do. Anyone have a theory about what causes this? Never had it happen.

"Gamma" slider in Preview's "Adjust Color" window now absent in 10.6. Why?

In Preview, if one chooses "Adjust Color" from the "Tools" menu, a small window pops up with various sliders allowing one to make minor adjustments to the jpeg -- contrast, sharpness, exposure, etc.
In previous versions of Preview that came with 10.4 etc., one of the sliders was called "Gamma," and I found it very useful. I'm no photographer nor a professional graphics person, so I couldn't even tell you the exact definition of what a "gamma adjustment" even is, but in my experience I found that it seemed to lighten the dark areas of the image without overly lightening the already-light areas. By fiddling with a combination of the "Contrast" slider and the "Gamma" slider, one could rescue a photo that was badly lit or unevenly exposed.
But in the new version of Preview that comes with my Snow Leopard 10.6.4, the "Gamma" slider has been removed entirely, replaced by the far-less-useful "Temperature" slider, which instead subtly adjusts the tint to appear warmer or colder (red/blue).
What happened to the "Gamma" adjuster? Is there any way to restore it, or customize the "Adjust Color" window?
What a bummer.
I really like Preview's "Adjust Color" sliders, and find them to be much more convenient for basic photo sprucing up than the more complicated controls in PhotoShop and other pro-level programs. I realize I can adjust the Gamma in these fancier programs, but I'd much rather have all the needed adjustment-controls altogether in the same program.
Any suggestions? I don't want to have to try to re-install an ancient version of Preview just for this one feature.

I did a Google search & found - http://earthlingsoft.net/ssp/blog/2009/08/macos_x6part2
"*Gamma: Apple (finally) changed the gamma value of their display calibration.* There goes the classic Mac look… well it’s not quite as (a) my MacBook’s screen is a crappy dithering **** anyway so I am in no position to notice anything and, more significant in a global sense, (b) the magic of colour management means that you shouldn’t see the difference caused by the gamma change on colour managed images. What remains are the UI elements and Apple seems to have done a reasonable job of making things look all right. Just some of my old icons seem to look a bit different now. In the long run I imagine this change may be beneficial for people who publish images on the web without knowing what they do. "

Can't open folder or add directory, window disappears

I am using mac mavericks running latest lightroom on creative cloud.
Whenever I try to add a folder, and navigate to a folder on my internal HD the window disappears. I've tried quitting/reopening and updating Lightroom and nothing changes. The last time I tried it I received the following error: https://www.dropbox.com/s/pucv89mw3uyoe17/Screenshot%202013-12-15%2014.03.09.png

How to Adjust Mouse Settings in Mac OS X Lion
By Bob LeVitus
7 of 9 in Series: The Essentials of Adjusting Settings in Mac OS X Lion
Some Mac OS X Lion users like to customize the way their mouse works. The Mouse System Preferences pane in OS X Lion is where you set your mouse speed and double-click delays.
If you have a notebook Mac, you may see a Mouse icon in the System Preferences application, but unless you have a mouse connected via USB or Bluetooth, it will just sit there searching for a mouse that's not there.
The first item in this pane is a check box that’s new in Mac OS X Lion: Move Content in the Direction of Finger Movement When Scrolling or Navigating. If scrolling or navigating in windows feels backward to you, try un-checking this box.
Next are the features you’ll find in the Mouse System Preferences pane (if you have a mouse connected):
Move the Tracking Speed slider to change the relationship between hand movement of the mouse and cursor movement on-screen.
The Double-Click Speed setting determines how close together two clicks must be for the Mac to interpret them as a double click and not as two separate clicks.
If your mouse has a scroll ball or scroll wheel, you also see a Scrolling Speed slider, which lets you adjust how fast the contents of a window scroll when you use the scroll wheel or ball.
If your mouse has more than one button, you see a pair of Primary Mouse Button radio buttons. These let you choose which button you use to make your primary (regular) click. Conversely, the other mouse button (the one you didn’t choose) becomes your secondary (Control or right) click. This is a setting many lefties like to change. Set the primary button as the right button, and you can click with the index finger of your left hand.
Original article located at...
http://www.dummies.com/how-to/content/the-essentials-of-adjusting-settings-in-ma c-os-x-l.html

Photoshop CS2 redraw garbage when moving around an image window on my G4 laptop

Hi.I recently had to reinstall Photoshop CS2 onto my Mac Laptop 1.5 GHz PowerPC G4, running system 10.4.11, which required a new hard drive after the old one died. I am immediatly encountering a serious redraw/image repositioning problem in Photoshop that I have never seen before, and in Imageready as well. This does not happen in Macromedia Fireworks 8 however.
I am zoomed into an image. Using the hand tool, or the scroll bars or the arrows, as soon as I move an image little messed up line graphic glitches appear and stay in place for the remainder or working with an image, and ultimately covers the image completely after moving around within it a number of times. you can see examples of this in these screenshots I've uploaded:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage04.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage03.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage02.gif
and the lines stay the same size and position even when zooming in. here's the same image w/ the same defects zoomed out and in:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01_zoomed.gif
I've tried trashing & re-installing photoshop completely, tried running it before the updates needed from the original Photoshop application disk, and after. still the same problem.
This occurs only when using the laptop on its own. When I hook it up to my Apple Studio Cinema Display, it works fine. The problem does not occur on the Cinema Display OR the laptop screen! it's very odd. Basically, the laptop is now something I cannot actually use away from my desk until this is resolved.
Has anyone ever encountered this or possibly have any suggestions or advice? Thanks so much!
-Rich
And here are some more specs on my computer & hardware:
Hardware Overview:
Machine Name: PowerBook G4 12"
Machine Model: PowerBook6,8
CPU Type: PowerPC G4 (1.5)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.0f0
Serial Number: 4H5456AZRJ7
Sudden Motion Sensor:
State: Enabled
Version: 1.0
GeForce FX Go5200:
Chipset Model: GeForce FX Go5200
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0329
Revision ID: 0x00b1
ROM Revision: 2122
Displays:
Color LCD:
Display Type: LCD
Resolution: 1024 x 768
Depth: 16-bit Color
Built-In: Yes
Core Image: Supported
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Cinema Display:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
ATA Bus:
MATSHITADVD-R UJ-845E:
Capacity: 1.72 GB
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk5
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Not Supported

Hi. Thanks for your responses. There is definitely some incorrectness in the info I provided about the computer. for the Hard Drive, it's odd.. I copied and pasted that from my system profiler.. In actuality the Hard Drive is 74.53 GB. Not sure how that error occurred.
Also I looked again at the computer's memory. I forgot the second larger 1GB memory card when I was copying and pasting from the system profiler. Sorry about that. I was in a but of a rush to get the question out.
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
DIMM1/J31:
Size: 1 GB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
Another thing I noticed about the problem I'm facing is that it leaves defects from mouse trails as well in the image window. None of the defects are lasting nor will they print. I close the file and they go away, if I zoom, they stay the same size. I'd agree, it sounds like a video card problem, but the reason I posted here is that only in photoshop and imageready do these problems occur. My guess, if it's the video card is that they are just programs that require more of the system. why my video card would be crapping out now, I have no idea. but I guess that's how it goes.
But why would it work fine when hooked up to the apple cinema display? even on the laptop screen itself the problem is not present. only when the laptop is on its own.
The computer has served me very well for almost 3 years without this problem, so that's why it's something that is not a normal problem that should be expected from this computer. I am grateful to have it & can't afford a new one.. this one is still sitting on my credit card balance. Thankfully I am under the applecare protection plan and will bring it in to the local Mac shop on monday and demonstrate the issue to them.
Thanks for your replies.

Safari 3.0.4 on OS 10.5.1 not crashing but browser windows DISAPPEAR! Help!

I know there is a thread in the beta forum with a generic title "Safari acting strange" but I figured a more specific thread title might get more attention from those experiencing the same anomalies.
Here is my problem:
I'm using Safari 3.0.4 that came with the Leopard 10.5 disk I installed on my laptop. Safari was working fine for a good couple weeks and then suddenly it began acting strange indeed.
Now after an undetermined amount of time when I have a Safari browser window(s)/tab(s) open it will suddenly disappear off my screen without provocation (meaning I don't have to perform any action to do this. I can be sitting there not touching the laptop or typing anything; it will just disappear as if some unseen person with a remote control hits the Let's-mess-with-this-guy's-computer button). At first glance it seems that Safari has crashed.
However when I look to see what happened or perhaps relaunch I see that Safari is still up and running. The menu bars all work. It seems to be in perfect working order. Only problem is the browser windows have disappeared and nothing I do will bring them back. I can try to create new browser windows and Safar thinks it is creating them because I can check in Windows menu and see the fruits of my efforts stacking up more and more as I add new windows and tabs in an attempt to get the browser windows back. However where these windows live is a mystery to me. When I try to quit Safari I get an Alert message asking me if I really want to close the windows with the multiple tabs in them (further supporting the theory that Safari still thinks windows are open and seeable by me)
When I DO quit Safari and relaunch it, it remains in the same state. No browser window is seen yet looking in the Windows menu I can see that a new browser window is present. The only way to use my Safari again is to reboot my computer. Of course this fixes the problem for maybe 5 minutes until the browser windows disappear again. And that's when I switch to Firefox.
I've repaired permissions. I've checked for any Input Managers folder for culprits but seeing as this is a fairly new laptop and that I just did an Archive and Install of Leopard with a fresh Safari in toe I have not installed any 3rd party applications so no Input Managers folder exists anywhere on my laptop.
I have the standard Safari Plug-Ins that come with Quicktime.
I have Spaces turned off. I am not using dual monitors so the browser windows are not being shot off to a second screen somewhere.
I see nothing in the crashlog because I actually don't think Safari is treating this behavior as a crash. It's not quitting unexpectedly or anything.
So I am at a total loss. Any ideas?

I had this problem as well.
First: In Safari go into preferences and select the "security" tab. Uncheck "Enable Plug-ins"
This fixed a lot of bugs for me !
Second: If that worked than you just need to go to Hard Drive/Library/Internet Plug-Ins
There should be a folder there that is called "Disabled Plug-Ins" I just put all of the plug-ins in that folder, went back and rechecked " Enable Plug-Ins" in Safari preferences, and then one by one added plug-ins back out of the disabled folder while reloading a web page that caused problems before. After some trial & error I think I have a setup that works for now. Hope this helps!! Also as of now I have installed all software updates. My mac has been doing this for a while. Logging out & back in reset safari back to where it was useable.
I have not had problems with any other programs.

ICal week view window is gone. When selected the window disappears.

Whenever I click on view->week view (or just the "week" button on the bottom row) my ical window disappears. No idea where it is going. If I click on view->day/month the window comes back. However, after it comes back in day or month view, the info sidebar (and button at the bottom to control it, along with the todo and results list buttons beside it) now isn't there.
Any ideas how to fix this? I think it happened when I plugged my laptop into a 1024x768 projector and then changed my mind quickly and unplugged it, but it has been like this for a couple of weeks now through several reboots etc.
This is a macbook pro running tiger.
Thanks,
Bruce

Bruce,
Often iCal display anomalies can be rectified by refreshing the iCal plist file.
Quit iCal, and drag the com.apple.iCal.plist file which is located in your Macintosh HD/Users/yourusername/Library/Preferences Folder to the Desktop. Then log out/in or restart and check iCal for desired behavior.
;~)

Month View makes window disappear

HI I am wondering about this - I was using iCal and it was working fine, then I cam back to the computer later, and the calendar had disappeared. I quit restarted, repaired permissions, all to no avail.
What I am finding is that I can see my calendars in Day and Week view, but if I change to month view the window disappears. It also does thew same if I press cmd+3.
I only use it on one computer, am not syncing to anything. The only that may have been strange was that I was connected to an LC Projector when i was using it, then I disconnected while it was still open. Afterward it doesn't seem to work. But I have also reset the displays to detect that there is not a second monitor, etc.
I am using a Powerbook G4 17", 1.67GHz, running 10.4.8, and iCal 2.0.4
I also can't seem to find an updater.
And just to try - how does one reset iCal to begin with, and not lose all calendars - I've been using it for about 3.5 years (and have the next 8 months scheduled out on it) and haven't had trouble until now, and don't want to lose everything.

Hi,
The window positions are kept in your preferences.
Quit iCal and try moving the com.apple.iCal.plist file in User>Library>Preferences to your Desktop, then re-start iCal. The preference file will be re-created with the default settings, this will not affect the contents of your calendars.
best wishes
John M

How do I save a photo after I have zoomed in on it? I want to save the zoom-in as a new photo and can't work out why this doesn't work the same way saving a cropped image, or adjusted image does. Thank you.

How do I save an image after I have zoomed in on it? I can't work out why I can't save a zoom-in the same way
I can save a cropped image or an adjusted image. Thanks, Lily A.

Hi Matt, thanks for your reply. Have realised that Zoom in Iphoto is just a viewing tool and not an editing tool.
Was creating beautiful abstractions by zooming in and wanted to create a new image of the result. Have since discovered that cropping after zooming takes me a little way to where I want to go but it isn't the same effect. Will perhaps have to try to create it when actually shooting. Am doing a photoshop course in February and maybe will learn a bit more then, too. Am pretty much an amateur just finding my way.
Thanks again,
Best, Lily

How to batch change multiple adjusted images by a fixed amount?

Anyone know of a way to change the adjustment values of multiple previously adjusted images by a fixed amount? For example, if, after adjusting exposure of multiple images by various amounts, I want to lighten them all by 0.5, is there a way to do this? If I lift an exposure adjustment value of 0.5 from one image and stamp it on others that have non-zero values of x, even with the stamp option set to "add" rather than "replace", they all end up with exposure 0.5 rather than x + 0.5.

Nope - no way. but... you can add a different adjustment that does the same thing. For instance if you adjusted the exposure individually and you want to lighten them by a fix amount on top of that you could just add a levels or curves that does the exact same thing.
RB

Image button disappears in pdf output

I have converted an image into a clickable button in Indesign, but the image button disappears in the pdf output.
I also noticed that while I was creating the button and in the Button and Foam menu the "appearance" eye icon is greyed out.
Can anybody help? Thanks!

It looks like you used InDesign CS6 (because you called it the Button and Form panel).
It's OK that the appearance eye icon was grayed out. Here's how it should look:
When you export, did you choose File > Export > PDF (Interactive)?

Adjust Image window disappeared

Similar Messages

Maybe you are looking for