Adjust Image Won't work

Hi:
I'm New to Keynote and I started to work with it and when I go to adjust an image nothing happens. Its like the controls are all frozen...Its strange because I have iPhoto too and all of the image adjust controls disappeared for that. Anyway, any help would be appreciated. Thank You, Norman
G5 Mac OS X (10.4.7)

Strange. I know that adjust won't work on .pdf files, so let's get an image that we know you shouldn't have a problem with. Control click .mac above and choose "Copy Image"), paste that into Keynote and see if you can adjust it.

Similar Messages

Canon 70D Raw images won't work on my version of Elements 12.

I know I need to get an update but not sure where to find.

Thank you! Worked like a charm. I just installed elements tonight and
appreciate your help.
Carolyn
www.carolynkamuda.com (http://www.carolynkamuda.com)
In a message dated 10/22/2014 10:34:33 P.M. Eastern Daylight Time,
[email protected] writes:
Canon 70D Raw images won't work on my version of Elements 12.
created by RKelly_ (https://forums.adobe.com/people/R_Kelly) in
Photoshop Elements - View the full discussion
(https://forums.adobe.com/message/6858032#6858032)

DVD burned from a disk image won't work on different computers???

Under the directions for how to burn a DVD from an disk image, the Apple Help document (http://docs.info.apple.com/article.html?artnum=93006) says this:
"Note: When burning a disc from a disk image, the burned disc will have the same format as the disk image. If you need a disc that will work on different computers, burn the disc in the Finder."
Does this mean that the DVDs that I am burning from the disk image won't be able to be played on a PC? a Mac other than mine? Neither? WHAT? I am planning to sell the DVDs of a workshop I present -- to people who may be playing them on PCs. Should I not be using this method (burning from a disk image) to burn my DVDs?
PowerBook G4 Mac OS X (10.4.9)

Under the directions for how to burn a DVD from an
disk image, the Apple Help document
(http://docs.info.apple.com/article.html?artnum=93006)
says this:
"Note: When burning a disc from a disk image, the
burned disc will have the same format as the disk
image. If you need a disc that will work on different
computers, burn the disc in the Finder."
Does this mean that the DVDs that I am burning from
the disk image won't be able to be played on a PC? a
Mac other than mine? Neither? WHAT? I am planning to
sell the DVDs of a workshop I present -- to people
who may be playing them on PCs. Should I not be using
this method (burning from a disk image) to burn my
DVDs?
Video DVDs are in the UDF format. The disk image you created is in the UDF format. When you use Disk Utility to burn the disk image to writable media, the new discs will be in UDF format and all will be well.
You are doing things correctly.
BTW, unless you have an external burner with lots of cooling, if you expect to use the burner in your Mac (which DOESN'T have lots of cooling), it's a good idea to pause between discs to allow the burner to cool down. (BTW, this comment is based on the reported results of several people in the forum. If you don't allow the cool down timer, you will start to create 'bad' discs. Also it is VERY important that you reduce the burn speed in Disk Utility to 4x or lower in order to create discs with maximum compatability with players. (You should see a way to change the speed in Disk Utility afterr you have inserted a disc.)
F Shippey

IPhoto 6: Adjust Button won't work

Just installed iPhoto 6 over iPhoto 5 - suddenly my Adjust button has stopped functioning (the new Effects button brings up the relevant panel just fine) - now I have no access to functions such as Sharpen or Saturation. Anyone know how to fix this? Without it iLife 6 has been a waste of my money.

Just installed iPhoto 6 over iPhoto 5 - suddenly my
Adjust button has stopped functioning (the new
Effects button brings up the relevant panel just
fine) - now I have no access to functions such as
Sharpen or Saturation. Anyone know how to fix this?
Without it iLife 6 has been a waste of my money.
A thousand thanks. Did what you suggested and it works just fine.

Copy and Paste for Images won't work on windows 8

Copy and paste function on my windows 8 laptop is not working. For texts and links it would work when I copy it from a website to word but when I try to copy an image to word it wouldn't paste it.

Hi,
Meanwhile, I suggest you check whether you have any third party anti-virus programs installed in your system, some of those software might prevent such copy\paste function, if you have, please temporarily turn off or uninstall them as a test.
Or as
raghuramu mentioned, it is a software restriction in some websites.
By the way, are you able to copy and paste between other application, such as word to word, not IE?
Yolanda Zhu
TechNet Community Support

What to do after making mask layer adjustment--other tools won't work??

I am new to photoshop and haven't been able to go through the tutorials yet. I managed to make a selection, create a new Hue-Saturation adjustment layer, and adjust the hue-saturation. But then what? There's no save button. The "apply" button is greyed out. I did File>Save but now I can't use my other editing tools (healing brush, clone stamp,etc.) They don't work and the circle are black. Please help!

You don't need to do anything to save your adjustment layer. It's done. But since that's the active layer, other tools won't work till you click back to a layer that has some pixels in it (the adjustment layer only contains the adjustment--there's nothing in it for most tools to work on). Just go to the layers panel and click the layer that contains the actual image, if you only have one layer (probably background) plus the adjustment layer.

Image gallery code won't work

Please Help, I can't figure this stuff out!
I've just built my second website and the code for clickable thumbnails for my image gallery doesn't work in Safari, unless I refresh the page. For some reason, a mouseover on a thumbnails fails to call the large image url. I tried adding an auto refresh to the code, but curiously that did not solve the problem.
Any ideas why this won't work in this Browser, but runs fine in IE and Firefox?
Thanks for any advice.
Here is the code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="content-type" content="text/html;charset=ISO-8859-1">
<meta name="generator" content="Adobe GoLive 6">
<title>Welcome to Kimerlee Curyl - p h o t o g r a p h y - horses, pets, el faro, headshots, weddings</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<link href="../../web-content/styles.css" rel="stylesheet" media="screen" type+text/css">
<script language="javascript">

</script>
<csscriptdict import>
<script type="text/javascript" src="GeneratedItems/CSScriptLib.js"></script>
</csscriptdict>
<csactiondict>
<script type="text/javascript"></script>
</csactiondict>
<csactions>
<csaction name="bfc75fbb127" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f15.jpg" urlparams="2"></csaction>
<csaction name="bfc75fc8128" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/faro2005/f14.jpg" urlparams="2"></csaction>
<csaction name="bfc75fd2129" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f13.jpg" urlparams="2"></csaction>
<csaction name="bfc75fdd130" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f11.jpg" urlparams="2"></csaction>
<csaction name="bfc75fe8131" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f9.jpg" urlparams="2"></csaction>
<csaction name="bfc75ff2132" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f7.jpg" urlparams="2"></csaction>
<csaction name="bfc75ffd133" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f6.jpg" urlparams="2"></csaction>
<csaction name="bfc76008134" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f5.jpg" urlparams="2"></csaction>
<csaction name="bfc76014135" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f4.jpg" urlparams="2"></csaction>
<csaction name="bfc7601e136" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f3.jpg" urlparams="2"></csaction>
<csaction name="bfc76027137" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f2.jpg" urlparams="2"></csaction>
<csaction name="bfc76031138" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/faro2005/faro1.jpg" urlparams="2"></csaction>
</csactions>
</head>
<body onload="preloadImages();" bgcolor="#471e12" link="#666666" vlink="#666666" alink="#99CCCC">
<table width="100%" border="0" align="center">
<tr>
<td align="center" valign="middle" bgcolor="330000" width="800">

<table width="778" border="0" cellspacing="0" cellpadding="0" cool="cool" gridx="16" gridy="16" height="953" showgridx="showgridx" showgridy="showgridy" usegridx="usegridx" usegridy="usegridy">
<tr height="304">
<td width="19" height="304"></td>
<td width="758" height="304" colspan="14" valign="top" align="left" xpos="19"></td>
<td width="1" height="304"><spacer type="block" width="1" height="304"></td>
</tr>
<tr height="448">
<td width="108" height="448" colspan="4"></td>
<td width="669" height="448" colspan="11" valign="top" align="left" xpos="108"></td>
<td width="1" height="448"><spacer type="block" width="1" height="448"></td>
</tr>
<tr height="116">
<td width="25" height="116" colspan="3"></td>
<td width="122" height="116" colspan="2" valign="top" align="left" xpos="25"></td>
<td width="1" height="116"></td>
<td width="122" height="116" valign="top" align="left" xpos="148"></td>
<td width="1" height="116"></td>
<td width="122" height="116" valign="top" align="left" xpos="271"></td>
<td width="123" height="116" colspan="2" valign="top" align="left" xpos="393"></td>
<td width="123" height="116" colspan="2" valign="top" align="left" xpos="516"></td>
<td width="138" height="116" colspan="2" valign="top" align="left" xpos="639"></td>
<td width="1" height="116"><spacer type="block" width="1" height="116"></td>
</tr>
<tr height="84">
<td width="23" height="84" colspan="2"></td>
<td width="124" height="84" colspan="3" valign="top" align="left" xpos="23"></td>
<td width="123" height="84" colspan="2" valign="top" align="left" xpos="147"></td>
<td width="123" height="84" colspan="2" valign="top" align="left" xpos="270"></td>
<td width="1" height="84"></td>
<td width="122" height="84" valign="top" align="left" xpos="394"></td>
<td width="1" height="84"></td>
<td width="122" height="84" valign="top" align="left" xpos="517"></td>
<td width="2" height="84"></td>
<td width="136" height="84" valign="top" align="left" xpos="641"></td>
<td width="1" height="84"><spacer type="block" width="1" height="84"></td>
</tr>
<tr height="1" cntrlrow="cntrlrow">
<td width="19" height="1"><spacer type="block" width="19" height="1"></td>
<td width="4" height="1"><spacer type="block" width="4" height="1"></td>
<td width="2" height="1"><spacer type="block" width="2" height="1"></td>
<td width="83" height="1"><spacer type="block" width="83" height="1"></td>
<td width="39" height="1"><spacer type="block" width="39" height="1"></td>
<td width="1" height="1"><spacer type="block" width="1" height="1"></td>
<td width="122" height="1"><spacer type="block" width="122" height="1"></td>
<td width="1" height="1"><spacer type="block" width="1" height="1"></td>
<td width="122" height="1"><spacer type="block" width="122" height="1"></td>
<td width="1" height="1"><spacer type="block" width="1" height="1"></td>
<td width="122" height="1"><spacer type="block" width="122" height="1"></td>
<td width="1" height="1"><spacer type="block" width="1" height="1"></td>
<td width="122" height="1"><spacer type="block" width="122" height="1"></td>
<td width="2" height="1"><spacer type="block" width="2" height="1"></td>
<td width="136" height="1"><spacer type="block" width="136" height="1"></td>
<td width="1" height="1"></td>
</tr>
</table>

</table>
<map name="bio_textBbfc725fb"></map>
</body>
</html>
<script language="JavaScript" src="http://hostingprod.com/js_source/geov2.js"></script><script language="javascript">geovisit();</script><noscript></noscript>

Someone else told me to put backticks around the session variable and it solved the problem, so
$q = "SELECT * FROM `{$_SESSION['find']}` WHERE id = $id";

How do I save a photo after I have zoomed in on it? I want to save the zoom-in as a new photo and can't work out why this doesn't work the same way saving a cropped image, or adjusted image does. Thank you.

How do I save an image after I have zoomed in on it? I can't work out why I can't save a zoom-in the same way
I can save a cropped image or an adjusted image. Thanks, Lily A.

Hi Matt, thanks for your reply. Have realised that Zoom in Iphoto is just a viewing tool and not an editing tool.
Was creating beautiful abstractions by zooming in and wanted to create a new image of the result. Have since discovered that cropping after zooming takes me a little way to where I want to go but it isn't the same effect. Will perhaps have to try to create it when actually shooting. Am doing a photoshop course in February and maybe will learn a bit more then, too. Am pretty much an amateur just finding my way.
Thanks again,
Best, Lily

"Compress images in pdf documents" won't work

I created this workflow:
1. Get selected Finder objects
2. Compress images in pdf documents
3. Copy Finder objects to...
... but it won't work, the images are not compressed. Anyone any suggestions?

To examine this I made three pdf documents from three Pages documents (running compression during export to pdf) each containing one image: one psd, one tiff and one jpg image. Running the workflow on these pdfs, the pdfs containing the psd and the tiff files were compressed but not the pdf containing the jpg image. I then made two pdf documents exported from Indesign containing a tiff file; one pdf export compressing and downsampling the tiff image and one with no downsampling and compression. Running the workflow on these two pdfs did not further compress the already compressed pdf, but did compress the pdf containing the uncompressed image. To further optimize pdf documents already compressed on export from Indesign one has to use Acrobat, which, of course, is the most efficient and flexible tool for optimizing pdf documents.

My airplay mirroring won't work with my macbook air, eventhoug my internet connection is very fast. The image will appear after 5 seconds.

My airplay mirroring won't work with my macbook air, eventhoug my internet connection is very fast. The image will appear after 5 seconds.

Mirroring is done over the local network so internet speed isn't relevant.
I would check istumbler.net to see if there is any interference

Import using develop presets won't work!

Hi all,
I just upgraded from LR2 to LR3. A lot to hate in this new version. But I suppose one needs to adjust and no doubt I will, but there is one thing that is about to drive me up the wall. Something I haven't been able to fix, so here I am, looking for a bit of help.
Here's the problem:
Because I don't like Lightroom's Sharpening & Noise Reduction settings, I used a preset in LR2 that I applied automatically when importing my images into LR. Now, with Lightroom 3 this just won't work properly and I get exclamation marks, indicating those images are not in the 2010 develop environment. I realised I was using my old presets, created in LR2, so that made sense. So I first deleted all my old presets and to make sure, I also deleted my metadata preset that I also apply on import. I couldn't find a way to delete those presets from within Lightroom by the way. So I just went to the library and trashed them manually...
Next:
I open LR3. Now I have no user presets anymore, of any kind. I then import the first image of today's shoot. In the develop module I make sure that I'm working in the 2010 process environment. I set Sharpening and Noise Reduction to what I want them to be and make them a preset. Then I made another preset for my metadata. But after importing the rest of today's shoot with the presets I have just created, it will not accept the 2010 settings and I get the exclamation mark with every image. I have checked that the culprit is not the metadata file. If I use only that to import an image and leave the Develop Settings on None, all is well, and the image is regarded as being in the 2010 process state. If I then *manually* apply my earlier created Noise Reduction/Sharpening preset, it accepts it and all is well. But as soon as I try to apply that same preset again when importing my images, then, when I go to the develop module, the image is suddenly in the 2003 environment again and I get the exclamation marks. I have tried everything I can think of but I cannot escape it any longer: I have been defeated by Lightroom 3. What on earth am I doing wrong here? Anybody?

Yes, I get the same thing with the sliders being greyed out. Funny thing is that the sliders *are* set exactly as in my preset and when I click 'yes update' to 2010 standards, the settings don't change but only the sliders become accessible. The thing is that I really don't want to be doing that with every import, even if you can do the whole batch at once. What I don't understand is that when I import with the preset turned off and apply it in Lightroom's Develop Module, it accepts it without a problem but that when I use the same preset on import, it won't work properly.
Now what the poster in the other thread said was:
"When I saved a new preset and selected to also save the process version, a line in the preset was created: ProcessVersion = "5.7". When I cut and paste that into all my other presets then the sliders were all active when I used them."
I have no idea what he is talking about or how one would do that. When I create a preset I simply click the + sign and in the pop up window select what I want, give it a name and that's it.
Edit: Sorry, I apparently overlooked the Process Version box in the preset panel! Must have been a case of not seeing the forest for the trees. Problem solved. Thanks.

Adobe CS5 Eraser tool won't work

My eraser tool won't work on any adjustment layers I add. It will erase on a background copy but not on a curves or black and white layer. It's strange because my brush tools are working and the eraser tool has been working up until now. It's not even showing up on the thumbnail image and my opacity is set to 100 % and I have tried pencil, block and brush tool. The burn and doge tools won't work either.
I have tried resetting my tools under the drop down menu awa resetting tool preferences, preferences and restarting the program whilst holding down ctrl, alt, shift. I am working on a Microsoft Windows 7 (OS). Everything else seems to be working okay.
Any help or suggestions would greatly be appreciated
Tamzyn

If you paint Black on the Layer Mask, it will mask the effect of the adjustment in the Adjustment Layer. Likewise if you paint White on the Layer Mask it will cause the adjustment to take full effect. Grays in between will cause the adjustment to be only partially applied in that area.
If you happen to have Black selected for the background color, the Eraser tool will act like a brush painting black (and thus hiding the adjustment) when you use it on the Layer Mask. That's probably what you did to see the Eraser tool work on an Adjustment Layer in the past.
As stated above, most folks use the brush tool for working on Layer Masks.
-Noel

PDFMaker loads but won't work in Word 2013 - Acrobat XI and DC - Win 8.1 Pro

OK, I opened a question that never got answered and it never was resolved...
Just updated to Acrobat DC - same problem exists...
I'm running Windows 8.1 Pro fully up to date..
I've uninstalled and reinstalled Office 2013 Pro (I have an Office 365 subscription so it's the click-to-run install).
I've uninstalled and reinstalled Acrobat Pro DC.
I've rebooted (a full restart, not Win 8's fast boot restart) between each installation.
I've tried this in multiple Office applications, none of them work EXCEPT for Outlook.
For the following I will use Word as my examples...
I've uninstalled all plug-ins and still it won't work.
I've tried running Word as Administrator.... still won't work.
OK... so this is what it looks like... as you can see the toolbar loads, but no icons...
https://www.dropbox.com/s/wsbs4kon3z4e965/Word%20Acrobat%20Screenshot.jpg?dl=0
When you click on those buttons... it goes through the motions as if it were creating the PDF... but no file is ever created...
If I right-click on a Word document and select Convert to PDF - it goes through the motions of creating the PDF, asks me where to save... and then a dialog box named "Acrobat PDFMaker" comes up saying " {Exclamation Point Yellow Triangle Icon} An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF."
If I right-click on a text file... and select Covert to PDF, it immediately pops open a PDF of the text file. Same with any image file.
This was all working perfectly up until out of nowhere it stopped working on January 26, 2015. See my original posting here: Acrobat XI Pro Word 2013 add-in stopped working
I can Print to PDF using the PDF Printer without any problems.
Creating a PDF in Outlook, no problems...
I'm hoping somebody can figure this one out... I'm completely stumped.... and I'm usually very good at troubleshooting stuff.

Click to Run according to Microsoft:
https://technet.microsoft.com/en-us/library/jj219427.aspx
"Click-to-Run is a Microsoft streaming and virtualization technology that reduces the time that is required to install Office and helps you run multiple versions of Office on the same computer. The streaming technology enables you to download and begin to use an Office product before the whole product is installed on your computer. The virtualization technology provides an isolated environment for Office to run on your computer. This isolated environment allows you to run the latest version of Office side-by-side with an earlier version of Office that is already installed on your computer."

Snow Leopard (10.6.8) Web Browser, App Store, iTunes Store image won't finish loading.

Hello,
I've recently upgraded from Leopard to Snow Leopard by clean installing. Once I upgraded to Snow Leopard (10.6.3) everything seemed to work perfectly except for the new keyboard that I purchased (requires upgrade to 10.6.8). So as I upgraded to 10.6.8 by "Software Update…".
Once the update was completed and the machine restarted I've noticed when I opened opened couple of common sites in Safari (such as: Flickr, YouTube, and Amazon) and some of the images won't finish loading with a "?" in the middle where the image would be and browser assumes that the site was done loading. First I thought this was a refresh problem so I hit refresh on the browser but nothing really happened. I thought this was strange so I decided to download Google Chrome and Firefox to try it out as well. Same situation as well… Then I opened the App Store and iTunes Store and the same things happened there as well. I'm assuming that all these images exists online so anything that access the web to load images will just crap out. One odd thing is that this problem don't seem to happen on any of the sites on Apple when I view it in the web browsers.
I couldn't figure out the reason so I decided to reinstall Snow Leopard (10.6.3) again by cleaning out the hard drives as before. Once it finished installing I opened up iTunes Store and Safari and the images loads fine. So went ahead (crossing my fingers) to "Software Updates…" to 10.6.8 and the the problem happened again.
I naively went ahead and tried to clean installing it again, thinking "Third time is the charm!" But same situation once I upgrade to 10.6.8. After the third time I let the browser sit there after it didn't load those images. I waited about five minutes and hit refresh and the images loaded. This happened the same with App Store and iTunes Store images as well. This is very odd because my interment connection hasn't been a changed before I upgraded to 10.6.8. Seems like browsers just cuts off the loading time of the whatever that's lagging instead on that site.
Is there a solution in the preferences for this or is this some kind of a bug that I'm having with my OS disc or network card? I don't think this has nothing to do with my modem or my interment service because it was working fine before I upgraded to 10.6.8.

I get that same problem too-you could try checking your network settings, release and renew your IP address, see if that helps. There is a tweaking menu you can get in Firefox that can help somewhat (google Firefox tweaks) but you'd have to raise the hood in FF and tinker a bit, but it does help. How much RAM do you have on your Mac Pro?, also update your Java and shockwave
sorry I can't be of more help
Jon B

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

Adjust Image Won't work

Similar Messages

Maybe you are looking for