Adjust Quicktime Volume Control when the application starts

3Apr07
I have a problem streaming program. Microsoft stopped supporting Widows Media Player for the Mac.
Micosoft has a application FLIP4MAC-MWV which will either open a window in Safari or has the option of opening a window in Quicktime.
My problem is: The volume level in Quicktime is too high when the stream begins. I use Wiretap Pro to record radio streams while I am at work. The default high volume distorts the recording.
I have tried and tried again to change the default volume level to a middle level, but the stream starts at max volume. How do I change that?
I also have the same problem with the Safari window level.
Can anyone tell me how to adjust the default volume in Quicktime and Safari?
Thank you for reading this post and greater thanks for any recommendations.
Regards,
Craig H. Henden

14Apr07
Thank you for you help. I actually don't use Quicktime-formated files or steams. I used to use Windows Media Player until the Wiretap Pro custormer support recommended I use Flip4Mac WMV to convert Media Player streams to Quicktime compatible. However, the volume is too high.
I did try adjusting the Midi Sound controller. It did not have the effect when Quicktime starts-up.
Most of the time I record using Windows Media Player or Flip4Mac, I am not home to adjust the volume.
I will try adjusting the Midi control again. I wish Flip4Mac converted Media Player formated streams to Itunes. Wiretap pro works very well with itunes.
Regards,
Craig H. Henden

Similar Messages

[Forum FAQ] Why does Office 2013 cost more network flow when the application starts by default?

Recently, we’ve heard that our customers encounter high network traffic since they large-scalely deploy Office 365/2013 within the domain/site. Does this behavior relate to the new Office? Or does Office 365/2013 cost more network resources in this case?
To troubleshoot this, we consider to analyze what happened during the process by Network Monitor tool.
Start a new capture first and launch Office Word 2013, get the following things as the screenshots:
According to the information above,
in addition to the network authentication flow, we could notice that the Word.exe would download a lot of PNG files from the link “/en-us/templates”. What about those PNG files?
Let us try to directly visit them via IE:
http://office.microsoft.com/en-us/templates/TM103463086.png?ts=AOLhIeGIzwg
Beyond question, they are the thumbnails of the Office template which are downloaded while the Office application starts by default.

In
some certain circumstances,
we might disable it by Office option or Group policy.
Disable Start Screen by Office 2103 UI:
Open Office 2013 application, go to File in Ribbon > Options tab > General page > under the section of Start Screen options, uncheck the options "Show the
Start screen when this application starts"
Disable Start Screen by Registry key:
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\General
DisableBootToOfficeStart (DWORD): set the value
to 1
Disable Start Screen by Group Policy:
Disable Start Screen by OCT:
That's all. If you have any questions or concerns about this topic, feel free to post here.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Initializing classes when the application starts?

Hi all,
I tried to figure this out myself but after loads of searching I found nothing, perhaps I haven't got the right search terms.
I have a web server written in Java with a BasePage class which is extended for each page in the application. What I would like to do is have each subclass automatically register itself with a static PageProcess class. The PageProcessor keeps a list of all registered pages, and can then check incoming requests against that list to decide which subclass should respond.
The problem is that constructors seem to only run when the class is first accessed, so the PageProcessor is never notified of these other pages. I used to have a hard-coded function that checked the requested url and then manually called a static boolean canHandle( String url ) function per-subclass, but as I get more pages this becomes a chore to update with more else if blocks.
Is there some kind of pattern or something I can apply to get this working? I'd like to avoid having a hard-coded list of pages to use in the application, but if that's the only real solution then I can go back to doing it that way.
Thanks,
Michael

Thanks for the reply. I had a look at doing that (via ClassLoader) as well as just checking for what .class files are present, this seems like a decent way of doing it. I had hoped that there would be a way to force the JVM to initialize classes right away rather than on first-access, but as it is I think the easiest solution will be to go back to having my static PageProcessor class have a list of all pages hard-coded.

How to set the cursor in a text box when the application starts?

Hi. It's me again. Its seems to me that there isn't any Spanish speaker, so I reformulate my question in English. What I want is to place the cursor in the text box so that the user can enter the text. Could anybody help me? Thanks in advance. MamenFLASH$

Hi. I have Flash 2004 Professional, as 2. Any idea of how can I do it
by means of Java Script or action script 2? Thanks in advance.
MamenFLASH$
El 23/01/2010, a las 21:22, kglad escribió:
>
you can do that when your flash has focus. (how you do it depends
on your as version).
>
and while flash can't set focus on itself, you may be able to use
javascript to set focus on your flash.
>

How to unfold all folders of AdvancedDataGrid when the application start?

Is there a way to AdvancedDataGrid automatically show all your content?

It might be worth checking in at the QuickTime-API mailing list about that, Manoj:
http://lists.apple.com/mailman/listinfo/quicktime-api

Does the iPad ignore the volume control when connected to the Digital AV Adapter?

Does the iPad ignore the volume control when connected to the Digital AV Adapter?

The volume limit is preset so yes you are unable to alter the volume on the iPad however you can control the volume on your tv and if you have AirPlay speakers you are able to adjust your volume as well..

How i can increase the volume when i playing a video? dont showing the volume control in the player..

how i can increase the volume when i playing a video? dont showing the volume control in the video player..

Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.

IMovie '11 - when I open iMovie the application starts, but there is no window, If i plug in my iPhone the window will appear from the top right corner, but disappear again. HELP!?

iMovie '11 - when I open iMovie the application starts, but there is no window, If i plug in my iPhone the window will appear from the top right corner, but disappear again, even if i use a drop down menu from the top menu bar and select, say 'New Project', it will appear from the top right corner, let me choose a new project, only to disappear again into that same corner.

Argh I'm having the same problem! I always use imovie, and haven't had this prob before... apprantly imovie 11 is full of bugs like this. Anyone know if theres any way of downgrading?

Why does using a digital connection from headphones out on a Mac into a stereo disable the master volume control on the Mac?

When you use an analog connector, it does not disable the master volume on the Mac. It's only when you use a digital connector, and it's ALL digital connectors. It still allows you to use the iTunes volume control but, when you stream anything else on the web on your computer, you have to use the stereo's volume control because the master volume control on the Mac has been disabled. Does anyone know why?

I had the same problem, instead of logging in the router with the iMac (impossible) I did it with my iPad, I guess you can do the same with an iPhone.
-Disconnect the iPad from your wifi network and connect it to the TP-Link repeater.
-Open the web browser (I use chrome) be sure you don't have any other open tab, just the one to access tptlinkextender.net
-The configuring page opens, from there follow the steps of detecting your network and adding the password.
*If your MAC address is hidden it'll appear without name, in that case you have to configure it manually (write the name on the space for that)
Now go, be happy and do good.

How do I Initialize a button to be enabled when the program start and if pressed then disable and gray it until a certain action is taken then comeback to the enabled state?

Hi!!!
I'm doing a program with the following buttons: Run, Abort, Repeat and Exit. When the program starts from the first time only Run and Exit button will be enabled and not disabled so the user doesn't press the Abort and Repeat button. The user has to select from a menu bar the test he wants to make then if he presses the Run button a pop up window will come up asking for the serial number and his name, and will comeback to the main program with the entered information. The user now has to press the Run button again to start the test, when the test starts the Abort button now will be enable
d and not disabled, when the test ends the Repeat button will be enabled and disabled. If the user selects new test from the menu bar the whole process will come again. I'm having problems with the menu bar because it has a time-out and when that occurs the program gets crazy. Also I'm not sure about what mechanical action I have to use for the Run. Do I need to count the times the Run button is press so the 2nd time is pressed it will be disabled. Do I need to use a sequential and where I initialize the buttons so the first time they are like I want (Inside or OUtside the while loop that ends with the Exit button) Any help wil be appreciated.

I'm not sure about the menu bar because i've never used them..i tend to go for listboxes instead.
As for the buttons, if you want to wire the button to a local variable then the button must be a switch, otherwise a latch is ok. But remember you will probably need to reset the button at the end of a run (ie. wire a constant through the while loop to the local variable for the switch). To initialize the buttons at the start, wire constants to their locals outside the main execution while loop.
Put the disabling/enabling functions in the parts of the program the button has activated. For example, you say the 2nd time the Run button is pressed you run the 'test', enable the Abort button and want to disable the Run button - put these property nodes into th
e 'test' sequence/loop.
Sequences are useful to control when you want buttons to be modified. I use them if i cant sequence the order of execution any other way. But try and avoid using multiple frames as it can get confusing if you start hiding code.
If you are still having problems, post an example of your program in no higher than LV 6.0.2 and i will try and adapt it for you.
Kim

You can't open the application Start.osx because PowerPC applications are no longer supported.

what does this error message mean? I am trying to use a disc that came along with a book I ordered for studying. However, when I try and run it, this is the error message I receive. "You can't open the application Start.osx because PowerPC applications are no longer supported." Anything I can do to fix this and make it work?????

Many educational CDs have not been upgraded due to lack of funds in the educational market to pay for such updates.
This situation is due primarily to the fact that one of the major political parties in this country favors tax cuts to the rich while cutting federal educational support funding (or eliminating the federal Department of Education altogether).
However, you can restore Rosetta and run your educational CD if you install Snow Leopard Server ($20) into Parallels (up to $79) for use in Lion/Mt. Lion/Mavericks:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439

Executing a program when the server starts

I have developed a chat program and to run it I have type "java ChatManager".
Is there a way where this program can start automatically when I start the tomcat.
Regards,
Sharad

The chat application is a java file. I need to keep it running so that I can use it in my applet. The problem is after I start the tomcat, I have start the chat application and for this I open a new window and type "java ChatManager". Once this is done I can start using the chat applet. Is there a way, where the chat application starts automatically when the tomcat starts. Do I need to add something in the server.xml file for this.
Regards,
Sharad

[Mobile] Put back the Volume Control in the Now Playing View

I have just updated to the newest mobile app (3.3.0) on my iPhone and now there is no volume control on the 'Now Playing' screen (same for Android).
I used to use this because when I go from my car to my head phones I need to turn down the volume a lot! And if I use the iPhones volume buttons, it says its changing my headphones volume but its just turning down my ringer volume (very annoying). Please put the volume control back.

Updated: 2015-06-19Marked as new idea and edited the title slightly to make it easier to find via search. ;)

Lightbox images are squareish when the gallery starts

Lightbox images are squareish when the gallery starts and should be photographic proportions, they are correct in the thumbnails. fit proportionately is on

I adjusted it on the gallery box itself and they all show correctly now, Should be automatic really. also better editing capabilities of the lightbox would be appreciated its a failry big and useful part of the software

The application start is forbidden, because of....... Error

Hi,
We are trying to install SP10 but it didn´t work and the portal is not starting, this happened before and got solved but the guy who did it is on vacation :O(, the Error we are geting in the logs is this one:
The application start is forbidden, because of the server mode and action
Does any one has a clue on how to solve this?
Thanx in advanced!

Hi,
We found the error, when installing the SP the J2ee engine went to Safe Mode, we set Safe Mode off and it is working again, thanx alot!
Gerardo J

Adjust Quicktime Volume Control when the application starts

Similar Messages

Maybe you are looking for