Adjust screen

I have a adjust my web page to any screen resolution. In my
first page I have an INCLUDE a header.asp, this header have a table
with one row x one col, 100% of width, but when I put a
Imageplaceholder inside table, centered, the image takes it's own
original width. Nevertheless I vary this to some widths, 900
pixels, 1000 pixels, etc, and the WEB page adjust for particular
resolutions, but not all.
How can I make to adjust my images, my headers and footers,
to any screen resolution? There are some method in HTML to make in
DreamWeaver, or there are some particular properties in the table
or ImagePlaceHolder to make this ajust?.
Thanks a lot to anybody.

KKJacks, that is the exact solution.  I was having same problem with 13" MBA connected to Apple Cinema Display.  Brightness controls from Mac external keyboard would not work with adjusting the cinema display.  In my case I have the MBA in clamshell mode but I only connect the power and thunderbolt cables.  I don't usually connect the USB cable. 
I attached the USB cable from the cinema display and voila, brightness controls now work from the keyboard. 
Well done, totally fixed it for me.  It's not necessarily intuitive to think that the USB cable would need to be attached to enable brightness controls from a wireless keyboard, so I'm glad I came across this!

Similar Messages

  • How adjust screen brightness in Windows 7?

    I used to use a Windows 98 laptop up to 3+ years ago, but since moving to Mac have largely forgotten how Windows works. I now have Windows 7 on Bootcamp and can't see how to adjust screen brightness. Surely there should be an adjuster on the System Tray (that's what it used to be called) bottom right next to the clock. I'm on 20" iMac with Apple keyboard (the long one with number pad at the right).

    Does the keyboard have brightness controls on the F keys?
    If these do not work: try holding fn and using the F keys.
    If that does now work I have to ask: have you installed the bootcamp software? you need to make a CD (or usb stick) of drivers and software from OSX then boot into wiondows and run it.

  • Have Upgrade Graphic Card Driver, But Still Cannot Adjust Screen Brightness and Sleep Button Not Showing After Clean Installation of Windows 8.1

    I have done clean installation of Windows 8.1 on my HP Pavilion G4.
    Then I realize that I cannot put my computer on sleep mode and cannot adjust screen brightness.
    I understand that those problems caused by the graphic card driver.
    My computer is running on AMD Radeon HD 6400 series.
    Thus, I manually search on internet and found a latest graphic card update on microsoft site that is claimed compatible on windows 8.1 (link: http://msdn.microsoft.com/en-us/library/windows/apps/dn344644.aspx).
    I've upgraded it into the latest one. I've check on Device Manager, the driver is running well.
    But my problem did not solved!
    Please give me the solution!

    Hi,
    How about go to Device Manager, then uninstall Graphic driver and restart your computer, system will install its build in graphic drver. You can have a try.
    In addition, access to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Brightness and set its value to 100 for test.
    Roger Lu
    TechNet Community Support

  • Lenovo N500 - how to adjust screen contrast and brightness ?

    I have to use a software to train my eyes and it requires to adjust screen contrast and brightness.
    I see that there are hoy keys in the keyboard to adjust brightness, but how can I adjust contrast ?
    Thank you.

    any icon on your keyboard buttons such as below?

  • Adjust screen size

    When opening photoshop elements it appears about 3 inches wider than my monitor making it impossible to access tools, albums and so forth. It is also taller than the monitor, so can't grab the top to move back and forth. I am not having this problem with any other program on the computer. How can I shrink it down the photoshop to fit the monitor size?

    If all your applications are showing this, you probably have to adjust screen position.
    Computers vary on how to do this, some have automated controls to adjust the
    screen position. Looking in the help section that came with your computer should tell
    you.
    If the problem is just with elements, make sure the application is maximized.
    MTSTUNER

  • Printing or saving 'adjustment screen'?

    I'm working with pictures and adjusting them with edit-adjust. I don't want to lose the adjustment settings for certain pictures. If someone would play with the adjustment screen, its gone. How can I make a print or save the settings of the adjustment screen? If I go to 'preview', where I want to make a 'screenshot', the adjustment screen goes away.

    To save the Adjustment setting click on the Copy button. As long as the Copy button isn't used again those settings will be kept so you can use them on other photos by clicking on the Paste button.
    Click to view full size

  • Re: Satellite L855 and Windows 8 - can not adjust screen brightness

    Hi everyone !
    I installed Windows 8 on my Satellite L855 and it is running pretty well except that I can no more adjust screen brightness !!! I updated all the drivers for Win 8 but it didn't resolve the issue.
    Hope someone can help me !! Thanks !!

    Hi
    Did you install the VAP (value added package) provided with Toshiba Win 8 upgrade assistant?
    Its necessary and the brightness can be controlled pressing F button
    F2 Decreases screen brightness
    F3 Increases screen brightness

  • Cannot Adjust Screen Brightness with Fn Keys on New L540 (8.1 x64)

    Hello everyone. I just purchased a new L540 with Windows 8.1 x64 on it and have run into a problem I'm seeing is apparently common. While my other Fn keys work as intended, I cannot adjust screen brightness with them. Pressing the buttons just does nothing and the laptop is running at full brightness at all times, even when on the battery. I have installed the latest Power Management Driver and from what I can tell, there is no version of the Power Management Software for anything newer than Windows 7. I also have installed the latest Hotkey driver (in fact, I've installed all the latest drivers for this machine.) I read in another thread that this can be caused by the latest HD Graphics driver from Intel but I actually can't even install that driver (says my system is not supported) so I am still using the latest Lenovo provided driver.
    Can anyone please assist with this? I want to be able to quickly adjust screen brightness when on battery but I can't do that at present. Thanks!
    Solved!
    Go to Solution.

    I have the same problem with my L540. It started with the update of the BIOS to version 1.65. Because I didn't find a solution, I went back to BIOS version 1.64, where all the brightness options are there and work properly.
    You can download older versions. When on the page with the new drivers (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS037285) go to BIOS Driver 1.65, then choose "learn more". At the end of the following page you'll see all the older versions.
    That you can install version 1.64, you have to change the "Secure RollBack Prevention" Option in the BIOS: Restart the Computer. When you see the option "To interrupt normal startup, press Enter", press Enter. Press once again Enter. Press F1 to enter the BIOS Setup Utility. Choose "Security" -> then "UEFI Bios Update Option" -> then "Secure RollBack Prevention". Change this option to "Disabled". Then press F10 to save configuration changes and exit.
    After restarting Windows you can install BIOS 1.64.
    Another possibility is to wait for the next BIOS version ....

  • Not able to adjust screen brightness in Windows 8.1

    hi,
    I m using HP Pavillion N208TX with windows 8.1 64 bit version. i m not able to adjust screen brightness from f2 and f3 button and from the power setting also. when i press these buttons it shows the slider to adjust the brightness on top left corner of the screen but its does not adjust the brightness from low to high. i have already updated the Intel HD Graphic driver sent via link from HP Cust. care. kindly help me on this ASAP...
    This question was solved.
    View Solution.

    Dear Customer,
    Welcome to HP Support Forum and we are glad to assist you.
    It looks like you are trying "Adjust Screen Brightness in Windows 8.1" for your Notebook.
    We will surely assist you with this.
    Please perform this step as shown below to resolve the issue:
    1. Go to Search  (point at upper right corner) and type Device Manager.  Go there.
    2. Expand Display Adapters
    3. Right-click Intel(R) HD Graphics and Left-click Disable
    4. Restart your computer
    Note: Your screen resolution might be distorted now, you can just ignore
    5. Go back to Device Manager, Display Adapters
    6. Right-click Intel(R) HD Graphics and Left-click Enable
    7. Restart again
    Note: If at any point your screen goes blank and won't come back, just HOLD DOWN your power button until
    the computer shuts down.  Then press power again to start up
    Hope this helps, for any further queries reply to the post and feel free to join us again
    "I work for Hewlett-Packard"
    * * * * * Click the "Purple Thumbs Up Icon in the lower right corner of a post" to say thanks * * * * *
    * * * * * Please mark Accept As Solution if it solves your problem * * * * *
    Regards,
    K N R K

  • Feature Change: Remove useless adjust screen brightness button.

    Remove useless button for screen brightness.
    both buttons serve same function.

    Oh - that explains it better.
    You do know that not every computer using Windows 10 has a key available to adjust screen brightness though, right?  Or, as in the case of the Surface, if you don't have a keyboard, the only way to adjust the brightness is only the software one? 
    For you it might not make sense, but include ~1 billion more people, and I think they should just leave both. 

  • Adjustment Screen - Personalization

    Hi,
    I want to do personalize the Adjustment Screen Form which is open via Sales Order and then Action from Line Level.
    When I go to personalize menu the personaliztion form opens but I can't access that form. Because the Adjustment Screen Form window property is set to Modal.
    How could I access it?
    Thanks
    Waqas Hassan

    But they don't give reasonable solution. Please guide me...What do you mean by "they don't give reasonable solution"?
    Thanks,
    Hussein

  • Cannot adjust screen brightness

    I have a Lenovo G585 and after updating to Windows 8.1 can no longer adjust the screen brightness, it used to work fine. I also had a problem with sound after I installed 8.1 but managed to fix that.
    Adjusting the brightness from Settings > Brightness does not work, nor does adjusting brightness from Battery Life > Adjust Screen Brightness or by using fn + up/down key. 

    hi jackbeazley,
    Welcome to Lenovo Community Forums!
    Open Device Manager and open Display adater.
    Right click on AMD graphics and choose Uninstall
       Be sure to place a check under delete driver software for this device.
           Now Restart the computer and install this driver
     AMD Video Driver  
    Check if the Screen Brightness will work now
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Cannot Adjust Screen Brightness after Windows 10 Update

    I Cannot Adjust Screen Brightness after i update my windows 8 os to windows 10. please give me solution. thank you

    c00lajay wrote:
    I have tried uninstalling the Graphic drivers, re installing from hp assistant, I even tried directly from Intel drivers but it is not letting me adjust brightness =( Latest driver version to my 4400 Gcard was 27/07/2015 I guess we have to wait since those drivers are win8.1 compatible only =( 
    Hey, I tried updating the driver, I googled something like intel graphic 4400 windows 10
    Then I found this link
    https://downloadcenter.intel.com/download/25150/Intel-Iris-Iris-Pro-and-HD-Graphics-Production-Driver-for-Windows-10-64-bit
    read at descriptions to see compatible chipset.  After I downloaded it started installing and the screen starting to do the "power off" think it does whenever you're installing video drivers et voila!  ´the brightness went down and now my "brightness up and down" keys are working ='3 
    I hope this help you guys  

  • How to adjust screen brightness in windows 10

    since i have upgraded to windows 10, i m not able to adjust my laptops screen brightness cause i m not getting the option to adjust screen brightness, nor the screen brightness up and down buttons are working. Also i have updated the graphic adapter and still the condotion is same...no change!!  plz someone give me the solution to get rid of this problem

  • Cannot Adjust Screen Brightness after Windows 8.1 Update

    Cannot Adjust Screen Brightness after Windows 8.1 Update....i am using sony vaio laptop....i recently updated windows 8 to 8.1

    Hi:
    Most likely you need to install the graphics driver for W8.1 from your PC's support and driver page.

  • Since I installed Mountain Lion, my iMac has shut down after 15-20 minutes. I have adjusted screen saver, shut down time, and sleep after. Nothing seems to help, any ideas?

    Since I installed Mountain Lion, my iMac has shut down after 15-20 minutes. I have adjusted screen saver, shut down time, and sleep after. Nothing seems to help, any ideas?

    As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
    You are now in a perfect position to do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    Here is a link to a Widget to monitor your temps and other operations:
    http://islayer.com/apps/istatpro/

Maybe you are looking for