Adjust the screen display dynamically for a given screen size and resolutio

Hi All,
Is there a posibility to change the size of a table control dynamically to maximize the screen utilization keeping in mind , the different screen size and resolution. This is to increase the breadth of the table control that there is maximum utilization of screen and which would not produce any horizontal scroll bar in case of small size monitors.Kindly advice.
Best Regards,
Ashwini

There is no such control that you can put into the programming logic to enhance the visual appearance of the table controls or screens. This is taken care of by SAP GUI, which will adjust the display size of the table control according to the screen resolution.

Similar Messages

  • The charging display is stuck on my screen

    The charging display is stuck on my screen and it won't do anything! I can't turn it on or off or anything else. What should I do?
    Dell   Windows XP Pro  

    Are you by any chance using iTunes 7.0.2 and firmware version 1.2?
    If you are then I would surmise that you are the victim of a bug in the firmware (if you look at the forum there are thousands of people with the same issue)
    Unfortunately for us users Apple appear to be burying their head in the sand on this one because there has been no official recognition of the problem, meanwhile people are continuing to download the firmware, oblivious to the fact that this will render their precious and much loved iPods completely useless.
    This is clearly a completely cynical policy by Apple because they know that publicly admitting the problem would seriously harm their sales in the busy Christmas period.......POOR SHOW APPLE!!! THIS WILL HARM YOU MUCH MORE IN THE LONG TERM.
    Fear not though, they will not be able to hide it for long because I know that the BBC are investigating this.

  • The company I work for has given me an iPhone, but I haven't been able to download any apps. I've created an apple account, it claimed that it had been verified, but everytime I go to download something, it verifies again and claims there's an error.

    The company I work for has given me an iPhone, but I haven't been able to download any apps. I've created an apple ID account, it claimed that it had been verified, but everytime I go to download something, it verifies again and claims there's an error. I've tried this now with 3 different emails, and the message reads: go to the iTunes support page. I've emailed Apple, and they were extremely unhelpful. I was given the most vague responses by Bidyut from the iTunes Store Customer service team. I would just like to be able to use this phone since I'm paying for it.

    It might be helpful if you told us exactly what the error was... If you don't give us specifics, the best you're going to get is vague responses.

  • I have Adobe Photoshop and Adobe Lightroom on my MacBook Pro laptop. I bought an iMac and I'd like to move my installations to the larger display desktop for editing purposes. How can I go about transferring them?

    I have Adobe Photoshop and Adobe Lightroom on my MacBook Pro laptop. I bought an iMac and I'd like to move my installations to the larger display desktop for editing purposes. How can I go about transferring them?

    I have the same question. It seems that Adobe is almost impossible to contact (I ended up here at the forums to ask the same question).
    I will never buy another Adobe product again if I can get another program to replace it. If this is customer service then it is NON EXISTENT!
    I notice that your question has not been answered and why should you have to get the information from a forum? I know of no other company that makes you do this for simple product information.
    NOT HAPPY with this version of arrogant customer service (nor am I happy about renting Photoshop products into the future - it is just a money grab in my opinion). I will be voting with my feet and going elsewhere in future.

  • I want better solution for adjusting the Material stock values for the last

    my Customer  need to adjust( Decrease)  the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
    Material1 :  RS: 4149599    QTY : 10181.03 Ltrs
    Material 2  : RS: 1318596     QTY:  2152.76   Ltrs
    As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
    Step 1 : post FI Journal Entry on 31.03.2006
    Opening Balance G/L  Account Dr 4149599 + 1318596
    Closting Stock a/c                      Cr 4149599 + 1318596
    Step 2.
    Change the Material Price in MM through T.Code: MR21
    ( Posting will be allowed in current or previous months)
    This makes our CO reports accurate.
    Please  suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
    WIth Best Regards,
    Rajesh
    <b></b>

    Hi Madhavan,
    Unfortunately this forum deals with migrations from non-Oracle
    environments to Oracle. You seem to be dealing with migrations in
    an Oracle environment mainly.
    I would recommend that you contact Oracle Applications and RDBMS
    support directly. They will have the most up to date
    information/advice on performing these actions.
    Regards
    John
    Madhavan (guest) wrote:
    : Hi John
    : Thanks for your reply.
    : Actually I am planning to upgrade the system.
    : 1. I Want to Upgrade Oracle Financials release 10.7 to the
    : latest version (11.x)
    : 2. Oracle 7 database to oracle 8 or 8i.
    : 3. Oracle is running on NT service pack 3. Do I need to upgrade
    : this?. If not what is the impact on Windows NT?
    : 4. Is the majority still running smart client 10.7 and database
    : 7?
    : 5. What is the necessary time to implement these upgrades? What
    : type of consulting I need to have?
    : 6. I have some employees working on it? Will these changes
    : affect them?
    : What type of precautions I need to take on the whole??
    : Thank You
    : Madhavan
    Oracle Technology Network
    http://technet.oracle.com
    null

  • I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

    I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
    Thank you,
    lagrl

    Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider.  iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
    Does this help.  Perhaps you already know this ?

  • Re: Satellite A660-12P - can't find the right display driver for Win XP

    Hey everyone, i need some help with this one:
    I just made a dual boot Win7 (x64)/XP (x86) on my laptop, but i can't find the right display drivers for the video controller VGA compatible on XP.
    Does someone know where i can find them?
    Many thanks,

    Yes, you get this message because you cannot install the nVidia rivers only executing the exe file.
    If you want to install such drivers then you have to do this in device manager.
    You have to force the notebook to choose the driver
    You can do this choosing the advanced installation procedure which helps you to point to the driver files!
    PS: might be helpful:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  • How to find out the corresponding planning area for a given infosource?

    Hi,
    We are in the process of implementing BW-APO in our project.
    We have got couple of standard BI infosources and now the task is to identify the corresponding planning area for a given infosource..
    Let' say for 0APO_DP_ORDERANALYTICS_1
    what is the planning area?
    Any help is appreciatable!!!
    Regards,
    Swapna.G

    Hi Swapna.
    You are at risk of putting the cart before the horse here. As Sujay asks, it is important to understand whether you are using the standard provided planning areas. Even then there are a number of different planning areas that may be deployed depending upon the required planning functionality. There then may be the case where standard planning areas are not being used (this is very often the case) which means that your InfoSources might only be good as a template.
    All this makes your question virtually impossible to answer.
    Maybe if you gave some background as to the status of your project we could help more.
    From your question it looks as if you are working on APO-BW outbound (i.e., reporting after the planning has taken place) which would suggest that the design and build of APO-BW inbound and the planning functionality has taken place. Is this the case?
    If so, then you need to touch base with your APO technical guys to understand the design of the planning areas and whether your standard 0APO_* InfoSources are suitable.
    If not, I suggest you are working back to front and you should be focussing on the APO-BW inbound required to support the planning requirements.
    Regards, Mark.

  • How can i adjust the sound level customized for each browser tab?

    Hi,
    I'm kinda a new mac user. I want to know how i can adjust the sound level specifically for each browser tab or application the way you could do in windows.
    Thanks.

    Volume Mixer feature  that Windows has, is not available in OS X.
    Best.

  • How do you determine resolution for a given print size in LR?

    CS3 displays image resolution for a given size. How do you determine what that resolution is in LR for a given print size, so you know whether you should upsize or downsize for optimum print resolution range?

    The only way I know of is to work it out. LR and PS make assumptions that are often not ideal (although the differences may not be noticable). Different printers like different resolutions per inch. For example, I once had an Olympus Dye Sub printer that produced awful prints unless the file was exactly 314 ppi. Not 300, 314. 300ppi looked awful. 314 looked amazing. Many Canon inkjets prefer 300ppi files and most of the better Epson's prefer 360ppi. Lambda printer like 400ppi files.
    So find out what the printer likes, and in LR enter that number into the printer dialog. I believe the LR engine interpolates the file based on this and the image size on paper you choose to produce a file of the best size.
    Having said all that with most modern domestic and prosumer inkjets the difference is pretty negligable.
    Gordon

  • Pop-up is displayed requesting for a WAS user id and password

    Hi SDN,
    I created a BEx iView based on Template-id. I am using single sign-on with user mapping. When i logged on to portal everything is working fine but initially a  pop-up is displayed requesting for a WAS user id and password of the BW system.
    I have mapped the Portal user with the BW user-id and password.
    Can any one suggest me how suppress initial pop-up.
    Thanks in Advance.
    Regards
    Basha

    Hi Basha,
    When you run the report from SICF you will definitely get the popup for authentication, as you are sending request directly on BW WAS.
    The reason behind you are getting popup in portal is that you have not used FQDN for BW server in WAS properties of System Object. Try to maintain same domain name for Portal and BW server.This you can easily achieve by modifying host file.
    e.g. <EP server IP>                 EPserver.abc.com
           <BW server IP>                BWserver.abc.com
    Use "BWserver.abc.com" in WAS hostname under system properties.
    Do let me know the result.
    Thanks,
    Amol.

  • I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information.  Im based in Japan but my card is registered to a UK address.  the fields only allow for a Japanese style address and postco

    I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information.  Im based in Japan but my card is registered to a UK address.  the fields only allow for a Japanese style address and postcode.  What can i do to complete the payment and get photoshop!

    As far as I know, your registered location and your credit card information must match... but,
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I tried to transfer purchases from my iPod to a new computer, but for some of the songs it asks for a different Apple ID and password than mine. Ideas?

    I tried to transfer purchases from my iPod to a new computer, but for some of the songs it asks for a different Apple ID and password than mine. Ideas?

    You definitely need to resurrect the old password associated with the Apple ID you used to purchase the music.
    Go here: https://iforgot.apple.com
    An email will be sent to the email address associated with that account with instructions regarding resetting that Apple ID's password.
    If you no longer have access to that email, the resolution to this problem becomes considerably more difficult. In that event you would need to contact iTunes Support and explain your dilemma.

  • Could take the same JNDI-names for both tags: jndi-name and local-jndi-name

    Hello!
    I try to design the weblogic-ejb-jar.xml descriptor and I ask myself, if I could
    take the same JNDI-names for both tags:
    <jndi-name> and <local-jndi-name> ?
    Could you give me and advice if this is ok?
    Thanks

    if you have two separate interfaces, you cant bind them to the same jndi
    name. you will have a local home that extends EJBLocalHome and a remote
    home called EJBHome. also you need to know which one you are looking up
    so you can cast it properly, and use it property (remote interfaces need
    PortableRemoteObject, remote parameters are passed by value, ...)
    joern kirch wrote:
    Hello!
    I try to design the weblogic-ejb-jar.xml descriptor and I ask myself, if I could
    take the same JNDI-names for both tags:
    <jndi-name> and <local-jndi-name> ?
    Could you give me and advice if this is ok?
    Thanks

  • TS2446 I've been trying to get into my apple account since Tuesday to do updates. I have tried everything. I have been on the phone with apple for hours at a time and nobody can help. Does anybody know what I can do.

    I've been trying to get into my apple account since Tuesday to do updates. I have tried everything. I have been on the phone with apple for hours at a time and nobody can help. Does anybody know what I can do.

    Try Resetting the PRAM

Maybe you are looking for

  • ICal: Changing the assigned calendar of an event sends out a new invite to all participants

    iCal version 5.0.3: I have multiple accounts set up (iCloud, shared, Exchange) in iCal. I've noticed that when I receive an invite that is assigned to the wrong calendar (e.g. to my icloud calendar) and I then change the assigned calendar to the Exch

  • IDOC Monitoring WE06 - RSEIDOCA

    Hi Guys, We want to monitos IDOCs for error in our ERP system. I have tried to use WE06 but I am not getting any notification apart from just "ALARM Message from Active IDoc Monitoring" which is very generic and doesnt give any details. Could someone

  • Movement Type from Customer owned Stock back to Plant Stock

    Hi Guru's, Is there a Mov. Type that allows you to transfer from Customer owned Stock back to Plant Stock, without creating any FI Documents? Please help thanks in advance Carlo

  • Calendar in HTML Form

    Hi, Does anyone know how can I include calendar, which comes with UCM 10gr4, in my custom form. Basically, I have a date field in my HTML form and I want to reuse the built-in calendar which comes with UCM. Any help will be greatly appreciated. Many

  • Exporting HTML DB Flows

    I have a Q -- I know the way to export Applications using the HTMLDB interface. Is it possible to do the same using some sort of a procedure/fucntion/cron job (from the backend) wherein all the Applications(Flows) are automatically extracted(given th