Adjusting Aspect ratio in Full screen mode

When Firefox is in Full Screen Mode, the text etc. occupy only the middle of the screen and is not displayed as spread over the entire screen.
Why?
What are the steps to follow to rectify this?
OS-WinXP with SP3 and NetFramework 4.0
Monitor - Samsung SA300 - 22" Wide Screen.
'''IE displays the page correctly.'''

You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Similar Messages

  • Aspect ratio wrong and different from QT in full screen mode

    Hi all,
    I created a video using anamorphic records from my camcorder in Final Cut Express HD. QT displays the final movies (MPEG 4 H.264) just fine in either partial or full screen mode. When played in Front Row, the video height is stretched. Any ideas why or how to fix?
    Movies are being played on a Mini connected to a 40" LED TV with 1366x768 resolution.
    Thanks in advance.

    It is true you can change the properties but it appears that Front Row expects all movies to have square pixels and thus displays all pixels as square. QT did/does understand the anamorphic properties and display movies correctly.
    As an aside to all, the previous solution was to generate all movies at 853x480. This results in a green bar on the 853rd column (at least when generating using Final Cut Express HD). I regenerated the movies at 852x480 and the bar went away. No other noticable effects.

  • Adjusted photos in full screen mode show digital garble over image

    Since installing iPhoto08 viewing photos in full screen mode is very disappointing and frustrating. Some images will appear with this (for lack of a better term) digital garble over half or the full photo. Sometimes by switching to the next or previous image it will correct itself. It seems to happen only with photos I've adjusted. This never happened with iPhoto6 that I upgraded from. These photos are all 8 mpix, my mac is a G5 2.0 with 2 GB RAM. I've also noticed that the over all perfomance of adjusting the photos is very slow as well. I posted the image here www.capacitornetwork.com/iPhotoDigitalGarble.jpg. Compare the left and right halves (The photo was originally shot B&W). Thanks!

    zaadar:
    Welcome to the Apple Discussions. Have you checked the HD with Disk Utility to see if it needs repairs? Not disk permissions but the disk itself. Also delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. A corrupt preference file has been known to cause some strange problems. It's worth a try.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Aperture 3.1 - Love Full Screen Mode, Hate The System Lock-Ups

    Hi Guys,
    I don't know if I'm the only person encountering this issue but Aperture 3 is driving me nuts. While I absolutely love the program and the full-screen mode, what I hate is the frequent lock-ups that force me to completely restart my iMac. Having the application lock-up is highly annoying but at least in "normal" mode I could kill the application from the Dock or Activity Monitor. However, when I'm operating in full-screen mode then I can't switch out of the application and seem to have no option but to completely restart my computer. This problem, which I first started experiencing with version 3.0 but which does seem to have been addressed in version 3.1, is happening so often that I'm afraid now to even use full-screen mode.
    This problem only, to my memory, seems to happen when making adjustments but it does not seem to matter which adjustment. In the most recent occurrence the lock-up happened when I cancelled the application of a Crop by clicking the X icon on the Crop HUD.
    Does anyone know either a) what might be causing the lock-ups, or b) how I can kill Aperture without having to completely restart my computer?

    You could also set up SPACES to see if that works when lock up occurs in full screen
    Apple Icon > System Preference > Desktop & Screen Saver > Hot corners
    I have bottom left set to spaces
    Then drop the mouse to bottom left, 4 windows appear, drag aperture to a seperate window and run there, you desktop is in a different space and can be accessed by bottom left of screen mouse movement (if the mouse works when A3 locks up)

  • How to exit full screen mode mail message

    Inexplicably, when i open messages in Mail, they appear in something like full screen mode.   The message viewer window is not in full screen mode, but if i open any message, the message takes up the whole screen. I can drag the message in order to see other things on the desktop, but i can't adjust the size of the window to the size i want, and see no way of exiting full screen mode. I lookd in Help, but it only shows how to enter Full Screen, not how to exit it. 
    In the View menu, there is an option to enter full screen.  When i have the full screen sized message open on top, the enter full screen option in the View menu is greyed out.  If i have the normal sized window for the message viewer window on top, the enter full screen is not grayed out and could be selected.  I do not select it since there appears to be no 'exit full screen' option that i can see and i don't want to multiply this problem.
    I know this might be a silly question, but if they have an enter full screen option, why wouldn't they also have an exit full screen option? 
    Or is there an exit full screen option which exists somewhere that i have not been able to find?  I've searched Apple Discussions and Google but so far have not found a way to un-full screen my Mail messages.  This started this morning.
    Can anyone help?  
    I do not know how it got into full screen mode.  It was not something i did deliberately or knowingly.
    i have tried quitting and restarting Mail but the full screen message mode returns. 
    How can i get my mail messages out of this very annoying and awkward screen hogging mode?
    I have only been using Mail since last November when i got a new MBP with Mountain Lion, which meant that for the first time since 1995, i could not use the simple straightforward faultless Eudroa anymore.  So i have had my struggles with Mail.  Trying to get through it.  This is the most recent of various similar issues, inexplicable problems without apparent solutions.  Sort of Microsoft-like.
    I will be really grateful for any help.. thanks

    Press Control + Command + F on your keyboard to enter or exit full screen mode.

  • Screen goes to sleep even when viewing movies in full screen mode

    Hi, I have adjusted my settings so my screen goes to sleep after 5 minutes which is ok. But it also does this when viewing movies in full screen mode.... Is this a setting somewhere? Thanx!

    Welcome to the Discussions!
    "When the computer is inactive" or "idle" means when YOU, the user, are doing nothing, neither using the keyboard nor the mouse. So you have to increase that 5 mins in Energy Saver.
    Andreas

  • 'Custom' frame size sequence displaying weirdly in full screen mode...

    I cutting an IMAX film, the frame is 1428 x 1050 (virtually 4:3 ratio). In ProRes it plays and works just fine on the timeline, proper proportions in the canvas and viewer windows ... and when I open it to full screen it works, proper proportions, as a 'still' image; but when I hit 'play' it pops into a 16:9 sort of frame ... the image squashed.
    This doesn't happen with an 'uncompressed' codec, only with ProRes.
    Is there any way I can set something in FCP to compensate for this? So it will actually play the custom frame in its proper proportions in a full screen mode?
    Ben

    Possible solution (skin) and workaround (listen for fullscreenevent) mentioned here.

  • Problem with Full Screen Mode in FCP X

    My images are not filling my frame in full screen mode. When I'm working with them in the viewer the fill the frame and everything looks normal. Does anybody know what the problem might be?
    Trey

    entrevon wrote:
    FCP X asked me if I wanted to adjust my timeline settings when I went to drag the first clip down. I clicked yes and went from there.
    Trey
    If this is the message you got, and you clicked OK, then your clip properties don't match your project settings. Verify by hitting command-j and if that's the case, click modify settings and change it.
    Russ

  • Opening swf in full screen mode

    Hi,
    Is there a way to adjust the screen resolution through actionscript? My requirement is to open the flash movie in full screen mode while all the contents are resized according to the screen size that the movie clip is runing. Please note the movie is not opening on a browser, it should be opened as a stand-alone SWF file.
    I tried to do this by setting stage.displayState = StageDisplayState.FULL_SCREEN; at the begining of actionscripot, but it didn't work.
    Thanks.

    Hi,
    I am using the below function and it is working fine..
    import flash.events.MouseEvent;
    import flash.display.StageDisplayState;
    fullScreenBtn.addEventListener(MouseEvent.CLICK, onfullScreen);
    function onfullScreen(event:MouseEvent):void
              stage.displayState = StageDisplayState.FULL_SCREEN;
    i think the problem is you are trying to load it full screen from flash IDE, if so then it will not work, Try to run the SWF file seperately, it would definately work.
    Vipul

  • Force RDP to connect in full screen mode

    Hello there,
    I have about 60 servers that I manage remotely using RDP from the office and from home.
    At the office I have a 19" screen with max resolution of 1280X1024 and at home I have 20" wide screen with max resolution of 1650X1050.
    When I work from the office, I have no issues. When I work from home, I first VPN into my machine at the office and then RDP to the different servers. After working from home and going back to the office, RDP opens in a 640X480 resolution and that produces
    horizontal and vertical scoll bars and I need to adjust it multiple times until it holds for all servers. If I work from home this happens again.
    is there a registry setting that I can force RDP to always start in full screen regardless of resolution used? I've been googling it for a little while and came up with nothing.
    I am using Windows Vista Business 32bit with RDP v6.0 at the office and Windows 7 Ultimate 64bit with the original RDP client at home, if that makes any difference.
    Thank you,

    I have exactly the same problem. If RDP detects that the monitor you are currently connecting with is a smaller size than that you last connected with it scraps the Full Screen setting and goes with the small screen size and puts it in a window which is
    completely useless because the windows key does not work as it does in full screen mode and also who wants to use scroll bars with an RDP connection to let you click on the start button??? really not user-friendly and i have to close then connection
    start a new RDP connection and check the screen settings every single time which is really not productive.
    What I would like to see is that if you select Full screen it will always be full screen and will NOT remove the full screen option to give windowed mode.
    Also it would be great if I can force full screen as default for all new RDP connections.
     I feel for you arie01 having 60 servers. It is not that bad for me because I only have about 10 to deal with!

  • Aperture screwing with brightness in full screen mode

    For some reason whenever I go into full screen mode Aperture keeps adjusting the brightness of my images. Every time I do anything it first looks "normal" then the brightness gets jacked up a few percentage points. When I turn on the Loupe, the image shown inside the loupe is darker (as it should be) as this odd "auto brightness" effect doesn't show up there. When not in full screen mode this doesn't happen. Saving the photo results in the correct image as well. So long story short this is only happening in full screen mode.
    I tried disabling the "On screen proofing" but it doesn't seem to have an effect. This is driving me nuts because I have no way to see the ACTUAL image until I save it! Thanks for any ideas you may have.

    Another update: I changed my external display to "default" in ColorSync Profiles as recommended in another thread, still have the same problem.
    I have now noticed that this phenomenon only occurs when the image being displayed on screen has to be scaled down to fit - so apparently there is something going on with Aperture's image preview being created on the fly?

  • Want window to open in full screen mode.

    Hi
    I am doing portal navigation on click of a button. The new window presently opens externally but not in full screen mode. Could anyone please help me acheive the functionality.
    If it cannot open in full screen maximized mode. Can I place it in the center of the screen and adjust its size.
    Thanks
    Prashant

    Hi,
    as per below method, you can pass correct values to parameter WINDOW_FEATURES.
    call method lr_port_manager->navigate_absolute
    exporting
    navigation_target = navigation_data-target
    navigation_mode = navigation_data-navigation_mode
    window_features = navigation_data-window_features
    window_name = navigation_data-window_name
    history_mode = navigation_data-history_mode
    target_title = navigation_data-target_title
    context_url = navigation_data-context_url
    post_parameters = ABAP_FALSE
    use_sap_launcher = abap_true
    business_parameters = bus_parameter_list
    launcher_parameters = launcher_parameter_list.
    It has values,
    RESIZABLE-  Windows can be resized
    WIDTH-  Width of the window
    HEIGTH-  Height of the window
    I hope this will help you.
    Thanks,
    Chandra

  • Please help me exit "full screen mode." I am unable to see the Safari menu bar.

    I have never used this tool. Please help me to "exit the full screen mode." I am unable to see the toolbar in Safari.

    kennedy0520 wrote:
    THANK YOU FOR RESPONDING. Is there a way to adjust settings in Safari, like my homepage? So far I am not pleased with the IPad. Wish I had looked at other tablets before buying. the main thing I don't like is Safari. I welcome any positive comments. Thanks.
    Safari doesn't include a Home page, but does allow for a multitude of book marks. In addition, there numerous other browsers available in the apps store. Some of them will allow for setting Home page if it is that important to you (personally, I don't miss it).
    The bookmarks bar can be be hidden from the setting app. There is no real tool bar in Safari.
    You might want to take a look through the User Guide and learn a little more about how the iPad works, if you haven't already.
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

  • Strange behavior when editing in full screen mode

    Very recently, Aperture has been acting very strange when I edit in full screen mode. When I make adjustments, the histogram completely disappears. When I reverse the adjustment, the histogram reappears and if I make the same adjustment again, the histogram looks normal. After a a few more adjustments, half of my screen goes black making editing impossible. Anyone else ever experience anything like this?

    col4bin wrote:
    Very recently, Aperture has been acting very strange when I edit in full screen mode. When I make adjustments, the histogram completely disappears. When I reverse the adjustment, the histogram reappears...
    yup. this usually means your system's graphic card is low on buffer cache, for example, you're running 256MB of cache on graphic card. graphic cards will run on 256MB of cache but if you're going to do photography/graphic work more buffer cache is better like 512MB or if you can afford it 1.5GB of cache, then your refresh rates will speed up
    victor

  • ALV - Full Screen Mode

    All,
    I have ALV grid using CONTAINER , i need to make it FULL SCREEN mode as per the user screen display resolution.
    Any Info ?
    PS: Please donot suggest to drag the screen to maximum. that will not work with different screen resolution.
    a®

    In that case, as Uwe suggested you have to use the docking control to generate the ALV
    Try like this:
    DATA: gt_outtab TYPE TABLE OF sflight.
    DATA: gr_table  TYPE REF TO cl_salv_table.
    DATA: lo_dock TYPE REF TO cl_gui_docking_container,
          lo_cont TYPE REF TO cl_gui_container.
    DATA: ok_code TYPE sy-ucomm.
    START-OF-SELECTION.
    *... Select data
      SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_outtab.
      CALL SCREEN 0100.
    *&      Module  STATUS_0100  OUTPUT
    MODULE status_0100 OUTPUT.
    "* Normal PF
      SET PF-STATUS 'SALV_STANDARD' OF PROGRAM 'SALV_DEMO_TABLE_EVENTS'.
      CHECK lo_dock IS INITIAL.
      CREATE OBJECT lo_dock
        EXPORTING
          repid     = sy-cprog
          dynnr     = '0100'
          ratio     = 95
          side      = cl_gui_docking_container=>dock_at_left.
    *      name      = 'DOCK_CONT'.
      IF sy-subrc <> 0.
        MESSAGE 'Error in the Docking control' TYPE 'S'.
      ENDIF.
      lo_cont ?= lo_dock.
    *... Create Instance
      CALL METHOD cl_salv_table=>factory
        EXPORTING
          r_container  = lo_cont
        IMPORTING
          r_salv_table = gr_table
        CHANGING
          t_table      = gt_outtab.
    "* ALV's PF
      data: lr_functions type ref to cl_salv_functions_list.
      lr_functions = gr_table->get_functions( ).
      lr_functions->set_default( abap_true ).
    *... Display table
      gr_table->display( ).
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
    MODULE user_command_0100 INPUT.
      CASE ok_code.
        WHEN '&F03' or '&F15' or '&F12'.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    Regards,
    Naimesh Patel

Maybe you are looking for