Adjusting Curve Shape in Hyper Editor

Hello all,
Is there a way to adjust the curve/slope shape (more concave, more convex...etc) drawn in Hyper Editor like how we can do with the automation in arrange window?
thanks.

Why not use Expression CC#11 in HyperDraw which is available below the Piano Roll?
Click on the line a couple of times with the pointer tool: Once before the point where you want the note to fade and another at the end point of the fade. Drag this second point down with the pointer tool.
If there are more notes after this point that need to sound, then you need to click a third time at the existing level before you drag down the second point.
Read the User Manual chapter entitled "Using Hyper Draw in the Piano Roll Editor"

Similar Messages

  • Jagged edges on curved shapes

    Flash has some serious problems with jagged edges on curved shapes. When adjusting a curve on a shape, flash shows that it is curved
    and then on releasing the mouse it turns into a sharp edge.  It has never worked correctly.
    Operating System:Mac 10.5, Flash CS4  

    Is it a fairly small shape and you're zoomed in?

  • Hyper editor

    Hi
    in a bass line, (midi) i want one note to fade. In the hyper editor, i use the volume track and it works fine, only in the mixer the volume slider happily moves up and down acording to the volume of the hyper editors curve. To be able to control the overall volume of the bass again, i send that bass track to a bus.
    Apple midi loops are full of that little white lines and the fader in the mixer never moves. Can i manage that too? I feel i make it over complicated and there is an easier way, is there?
    Turning the region into an apple loop leaves me with the same result, the fader in the mixer still moves.
    The manual has left me clue less.
    Pra

    Why not use Expression CC#11 in HyperDraw which is available below the Piano Roll?
    Click on the line a couple of times with the pointer tool: Once before the point where you want the note to fade and another at the end point of the fade. Drag this second point down with the pointer tool.
    If there are more notes after this point that need to sound, then you need to click a third time at the existing level before you drag down the second point.
    Read the User Manual chapter entitled "Using Hyper Draw in the Piano Roll Editor"

  • Hyper Editor Bug

    Hi, everythings been fine but over the last few days, i have noticed that i will be working away then all of a sudden the volume slider of the channel i'm on suddenly jumps to +2.6 db. (always 2.6)
    I have no idea why this has started happening and it's really getting annoying now.
    When i record on a midi channel, it will record the jump in level in the hyper editor which leads me to believe that it is something to do with that and not automation.
    I'm not sure but i know it's **** annoying.
    Any help would really be appreciated, thanks guys
    (latest update and os x too btw)

    Same here. I usually right click when I' done my actual entry to get the mouse to let go. Then I have to undo the extra info inserted before the release. Annoying, but workable.

  • Adapt a piece of text to a curved shape?

    Hi to all,
    i want to adapt a piece of text to a curved shape, you have
    some examples here:
    http://www.saveyourmovies.com/images/text/TextEffect_ReShape_001.gif
    Is it possible with FH MX 11? how can i do it?
    if it is not possible, do you know any app to do it?
    NOTE: im a mac user, but lets try it windows users.

    I made this example for you;
    http://img58.imageshack.us/img58/2480/testingtoolsgt4.jpg
    (if url is not working, erase all after .jpg)
    First type and make your curve, mark both and use Attach to
    Path
    Then you see some kerning faults that you can take care of, I
    didn´t, and after this you convert to paths
    If you can find an Xtra toolbar, you will probably have a few
    tools to distort with
    I used Fisheye Lens and then 3D Rotation after that
    If you then would like color fills, maybe gradients you can
    do it in one step, or ungroup and treat each letter as you like...
    Good luck!

  • How can I erase velocity in Hyper editor?

    I unintentionally let my breath controller write velocity into the hyper editor. I can't get the event list to show velocity in the hyper editor. I must not understand the event list. would someone please help?

    Thanks all, It was in the editor drop down menu=delete hyper set.

  • Tone Curve in DNG Profile Editor

    Is it possible to load a Point Curve from Adobe Camera RAW into the DNG Profile Editor as aTone curve? 
    I know you can enter the data again in the DNG Profile Editor in the Tone Curve Tab, but I develop the curve using Adobe Camera RAW and have it saved as a Point Curve. 

    Rob, I looked at the both a curve xmp file and a profile recipe that contained a custom tone curve with a text editor.  The profile recipe has a lot of information and it's not easy to locate the tone curve data.  I think it's easier at the present time to input the individual points in the tone curve tab of the DNG Profile Editor.  Maybe Adobe will add this capability at some point. 

  • Colour pane to change whilst adjusting curves in channels

    When adjusting a curve on a channel, if you eye dropped an area the colour pane no longer previews the adjustments & is 'static'. This used to work in CS2, but now doesn't:

    OK, sorry I will try to explain again.
    I am using Photoshop CS5 & am adjusting curves on a spot channel. Before in CS2, if you 'eyedropped' an area whilst in curves & then adjusted the curve the colour pane would show you what you are adjusting to.
    This now does not work (see below).
    Hope this explains better for you.

  • Ultrabeat and Hyper Editor

    Hi there,
    I have a feeling I know the answer to this question so I am just seeking confirmation really!
    I have got used to changing AU controls in the hyper editor using fader event definitions. The way I generally do this is by creating a new definition, connecting a 'monitor' module to the channel in the environment and moving a knob. The monitor reports the (my terminology may be wrong) internal channel, followed by the control ID of the knob I was moving. I then set the channel and number settings on my hyper editor definition and it works fine for controlling that setting.
    However, when using ultrabeat I follow exactly the same process, the channel and number gets reported by the monitor module but it never seems to work once i put that info into the hyper editor definition.
    The weird thing is that it also doesn't work for inserts on the ultrabeat channel. Using a channel number of 3 or 4 for example allows me to control the inserts in slots 1 and 2 on most channels, but on an ultrabeat channel this doesnt work either!
    So, is this just because of the huge array of parameters available on ultrabeat, does it just disable any kind of hyper-editing in this way because the max 'number' setting of 127 is not enough to define all the controls on ultrabeat? It's annoying that it seems to stop inserts as well because otherwise you could use extra effects to replace the stuff you can't do on ultrabeat itself..
    oh well, I hope that makes sense!

    These kits are mostly reasonably sized multisampled kits, and so require the EXS24 (or Garageband versions of the EXS24).
    Ultrabeat's sample playback doesn't support multisampling, so you can't load those kits into Ultrabeat directly.
    The best thing to do is create a blank template sample-playback only kit in Ultrabeat, then navigate to your GB samples directories and drag in the kicks/snares/hats/etc drum samples you want, and save the kit. That way, you can create dozens of UB kits with your favourite samples.

  • Hyper editor for controling plug-ins

    Hi! the plugins won't listen to fader midievent from the hyper editor in one of my projekt. It works fine on another projekt. I try to control highcut freq on an eq on a chanal strip. I've checked that the type, channel and pitch is correct. Have anyone any idea what it could be?

    Hi, I was kinda curious about this and decided to d/load the Reaktor 5 demo and tried it out. No problem mapping screen controls from Mainstage to R5 knobs or sliders and it remembered all the connections between each patch just fine.
    I didn't do anything special just the usual click the Mainstage control then mapped the parameter to a control in Reaktor 5 and it worked fine even with the R5 demo. Maybe you can provide a little more detail on how you tried to configure?

  • Possible in hyper editor?

    Is it possible to use the hyper editor to do something like: attach a pitch change to the end of all the (midi) notes within a certain range or time frame? In other words, if I want each note from bar 1 to 20 to bend up 4 semitones, is that possible?

    OK, then just draw one eighth note of pitch bend data, you'll need a hi-res grid for it to be meaningful, copy it, move the spl to the next note location and paste. You can do this all with key commands.
    The problem is that you have little control over it, other than varying the scaling that the synth responds to pitchbend. It did however, only take me 45 seconds and a few mouse clicks to open Sculpture, target envelope 2 to Pitch and set up the envelope for an eigth note sync'd to tempo. Then you just automate/toggle the Enable Envelope 2 Target 1 parameter for the bars that want the effect.
    But hey, if you want to do it with pitchbend, then you go guy!

  • WhaTS going on with my hyper editor

    OK, so all of a sudden, when I create a GM set in my hyper editor the tags are wrong, for example where it says Kick 1 the sample I get is like a bongo or something, I've used the hyper edit with this instrument (the Garage band Rock Kit) like a hundred times and this has never happed before, whats going on?

    Welcome to the Apple Support Communities
    They replaced the logic board but not the memory. Take the Mac to an Apple Store to replace your memory or buy the memory and install it yourself

  • How to distort image into curved shape

    Hi,
    I want to distort an image to curved shape.so that the image should be wrapped around to tea cups,mugs or any cylindrical shapes.
    If anybody have idea please help.
    with thanks,
    srinivas

    hi,
    You can do this a few of ways, you can use a 3d library like away3d then have a surface on the model that allows an image to be 'molded' to it,
    http://gumbo.flashhub.net/gifting.html 
    this will give you an idea of what can be done, select some images from your hard disk, click on the image button(1 or 2) then select an image for that holder, it will display on any 3d object you choose.
    You can use a library like as3dmod http://code.google.com/p/as3dmod/  which has a bender utility which enables you to 'shape' an image
    http://gumbo.flashhub.net/flip/  this will show you the strength of image bending with as3dmod.
    There is also pixelbender, this is more complex as you need to write code to create filters that will 'bend' the image. But there may be something in the pixelbender gallery. http://labs.adobe.com/technologies/pixelbender/
    Just note the 2 examples I gave you for away3d and pixelbender will not have sourcecode available, I just linked the examples so you can see that the image manipulation is possible with flex.
    David.

  • Notes disappear in Piano Roll and Hyper editor

    When recording with either the piano roll editor or the hyper editor windows open the notes disappear and then reappear when recording is stopped....does anyone know how to turn this off? so annoying. thanks.

    Pancenter wrote:
    christianobermaier wrote:
    Uncheck the Link button of the Piano Roll.
    Christian
    The only version(s) that showed both previously recorded notes and new ones as they were played was the last few PC versions of Logic.
    pancenter-
    I wonder why they did away with that...it's very helpful to be able to see that....

  • Is "AutomationTool" available in PianoRoll hyper-editor now?

    Is "AutomationTool" available in PianoRoll hyper-editor now?
    SvK

    Hi SVK,
    Long time.
    There's a new Logic 8 forum that we should be using for these new questions...besides, no one actually has LP8 yet (unless they signed an NDA).
    X

Maybe you are looking for