Adjusting for mic placement in Garageband

Hi all,
I recently recorded a jazz band in a concert hall into Garageband. There were quite a few spot mics on stage, as well as a pair of stereo overheads. What I want to do is move over the overhead's track by the 30 milliseconds or so needed to compensate for sound speed, to make everything line up perfect. I'm not sure there's a way to do this in Garageband, but any help would be appreciated.
Thanks!

You have two options.
1) Use a delay Plugin
Use a AU delay where you can set the delay in ms.
2) Move the Region
I dodn't know of any nudge command for the Region like in Logic but you can do it also "by hand".
First, sswitch the Time Display to "Time in the Control Bar
Now when you move a Region, a black Help Tag will display the Position, the Length and the Offset (how much you moved). The trick is to zoom in far enough that you can perform small movements.
The time is formatted in hours:minutes:seconds;frames:subframes.
GarageBand is base on 25 fps (SMPTE/EBU) and each frame is divided into 80 subframes.
If you do the math, then 1frame=40ms and 1SubFrame=0.5ms
If you want to shift the Region by 30ms, then you should have an offset by "0frame.60subframe"
Just a tip. Don't get caught up in numbers. At the end let you ears decide if it sounds right. There are other factors as early reflections and frequency response that play a role about the percieved "acoustic image".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Similar Messages

Bridge CS6 How to turn off auto tone adjustment for the loupe?

Adobe Bridge CS6. 'Apply auto tone adjustments' is unchecked in Camera Raw Preferences. Yet every time I click on an image in the preview panel it does a tonal adjustment before it magnifies the image detail. I am viewing bracketed images and do not want any auto tone applied at any time while previewing images. How can I turn off all auto tone adjustment for the program - including the loupe. I never had this issue in a previous version. I'm on PC. Thanks for any help!

All 4 Default Image Settings are unchecked. Checking this further I have found this is only a visual issue in Bridge Preview. I have opened the same raw file before any adjustment had taken place (w/o using the loupe magnifier) in PS CS6 - and then again opened it after using the magnifier which did an auto contrast adjust on the image. Both files are the same in PS CS6. This is only a visual issue within Bridge (Master Collection CS6) on my Win7 64 bit machine. No issue with a standalone PS CS6 version on my XP 64 bit system.
There is no auto adjustment of the image until I use the loupe (magnifier tool).
Note my previous comment as to what happens when I use it. Thanks!
I have a feeling this is a bug. I have a Photography help group on fb and posed this question to them. I had mostly no issue responses but got this from another person. I checked after reading this and it is the same issue with me - this only happens with raw files, not jpeg. Here is his comment line.
Carl, I see what you mean, I have tried several adjustments to the preferences and none seem to work. The image automatically adjusts after a brief time. There does not seem to be any way to turn off the adjustment. I'm using Bridge CS 6 on a Mac. I don't think it has anything to do with camera calibration, but it only happens when using RAW files. I tried it on JPGs and TIFFs and it did not adjust the loupe image. Wonder what Adobe has to say
So - tThanks for any thoughts! So at least it's not going to be an editing issue - but it's a pain here. I use Bridge to edit my shoots and I often shoot bracketed images. While I cull images according to the histogram, I also do visual assessment and I can't have Bridge doing it's own thing on tonal adjustment.

Config settings for Decimal places in Master Inspection Characteristics

Hi,
can any body tell me where to do the configuration settings for decimal places in master inspection characteristics
i want my limits to be 1.234
i want 3 decimals after point
Regards,
Raj

Hi,
Please go through the below link.
http://www.freesaptutorial.com/how-to-create-master-inspection-characteristic-in-sap-qm-module/
While creating the MIC in QS21 after entering the control indicators you will get Quantitative data screen.
In that screen you can enter the decimal places, UOM, target, lower limits etc
Regards
Hari

Can you set up a template for live performance in GarageBand for iPad Air?

II'm trying to set up a template for live performance using GarageBand on my iPad Air. Can anyone advise? Thanks.

QuickTime is AppleScript aware and has its own "dictionary". Many scripts and droplets have already been compiled and you can download them from this link:
http://www.apple.com/applescript/quicktime/
Some need further editing to update them to version 7 features but it's not difficult using the Script Editor app.
Tiger's new Automator app could also be used but its feature set is rather basic. Newer actions are available for download from the Mac OSX Downloads page.

Default values for long text for mic in inspection plan

hi,
Some long text are coming default when i am creating inpection plan for mic.
This is coming for only particular plant. For other plant it is not coming. Is there anywhere we can make it as default for a particualar line item . ie for particular characteristics i.e 10, 20 etc
sathish. R

Hi,
I am not sure , whether you are mentioning about Long text for MIC or Default insp char number (10,20,30..) in the insp plan.
If you are talking about Insp char number in the insp plan . you can specify the same in SPRO , QM->Q planning ->Insp planning -> General -> Maintain profiles for default values.
Regards
K.M.Arun

FM to calculate Number of working days adjusted for an employee -ABAP HR

I have one requirement in which i have to Calculate "Number of working days adjusted" for an employee for a disability program.
In this context i wanna know, if just get difference between two dates (i.e the duration for which employee was compensated ) based on Holiday calender...Will this give give me "Number of working days adjusted" for an employee or i have to consider work schedule for an employee? If yes , Then please let me know sm FM to calculate number of working days between two dates speific to an employee.

check
HR_PERSONAL_WORK_SCHEDULE
HR_GET_QUOTA_DATA

No volume adjustment for video clips

Hi there!
I have noticed that the volume adjustment for video clips, set in the options pane of the clip itself, will not be respected by iTunes while playing the video.
Is there someone else with a similar issue or already with a solution?
Thanks in advance!

I've tested all versions since 10.0.1 (for PC) and none work. Versions 10.0.1 and below will allow you to change the volume adjustmant and the equalizer setting for individual videos. No answer from apple! You can try an older version like I did.

Is there any way to use a aunetreceive for a track within GarageBand?

Is there any way to use a aunetreceive for a track within GarageBand?
I have an application, Soundboard, which sends audio via the aunetsend plugin. I'd like to manage the output of this application within Garageband as a track. Is there any possible way to do this?
Thanks

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Why is there a limit on the number of times a "DVD player region" can be changed, and can it be adjusted for more region changes, or an indefinite number of region changes?

Why is there a limit on the number of times a "DVD player region" can be changed, and can this numbert be adjusted for more region changes, or an indefinite number of region changes?

Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

Table for MICs

Hi,
while creating MICs in QS21 i have a tab called Control Indicator...
in that i have a check box called Long Term Inspection
can any one tell me in which table this detail exists for ALL MICs....
or else atleast tell me the table for MIC details...

Hello,
ALL MICs.... are available in this tables.
Table fields                     Short descriptn
QAMV                             Characteristic specifications for inspection processing
QMTB                              Inspection method master record
QMTT                              Inspection Method Texts
QPMZ                             Assignment table - insp. methods/master insp. characteristic
Anil.

Automatic PO adjustment for pricing condition changes sap

Hello SAP users,
How to prevent automatic PO adjustment for pricing condition changes to purchase order items that are marked for deletion. Please respond.
Thanks

Hi,
Check the settings in below configuration:
SPRO>MM>Purchasings>Conditions>Automatic document adjustment-->Control doc. adjustment.
SAM

I am looking for educational posters from Apple or for Garageband, if they exist. I'll be teaching a new class for middle school using Garageband next year. Thanks!

I am looking for educational posters from Apple or for Garageband, if they exist. My school district will be teaching a new class for middle school using Garageband next year. I'd love to make the rooms look awesome! Can anyone hook me up? Thanks!

lucky14life wrote:
first i was wondering what everyone thinks about macbooks compared to let's say another pc like hp,dell,etc.... i have been told that i'd have to be dumb to get a machine with windows vista on it,so that is why i have turned my focus to a macbook because i have heard they are pretty good and worth it...
I personally like my MacBook better than any other computer I have ever owned. I like being able to use windows when I need to but not being tied to it. My wife bought an HP with Vista and it doesn't seem to bad. Lots of updates at least one a week. Mostly graphic card drivers update.
also is it true that if you upgrade let's say the memory,hard drive,etc it won't be covered in the warranty/apple care plan??
Only two things you can upgrade on a MacBook is the Hard drive and Memory. It will not void the warranty. This is apples word on it. DIY Warranty Info
I would just like to ask for people's opinions please on purchasing one of these i am currently a senior in college and will be using it next year for grad school,need to replace the one i currently have...
Be sure you can live with the graphics. If you do a lot of graphics work you might want to consider the MacBook Pro. I use my MacBook for video editing using Final Cut Express HD and it works well. The MB is also not very good for gaming if you are into that. The integrated chip set doesn't work well with 3D games.
also any other ideas on getting iwork or office, a hard plastic case or a skin,thanks alot for anyone's input it is greatly appreciated.... i am looking to get one once leopard comes out thanks!!
Depending on your school may be a factor in what you choose. I use iWork and it is pretty good. You could also try NeoOffice or Open Office. They are good also. Office is supposed to be coming out with a new Mac version but not sure yet how it will work.
Be sure to ask for the student discount when you purchase the computer and software. It adds up.

Adjust for Brightness Corrections the Camera made

I have some video clips where I am trying to make two types of corrections.
I am using Warp Stabilize to correct for movement in the way I handled the camera during the filming process. Warp Stabilize seems to do a fair job of fixing this, I can accept this for now.
Then I am trying to repair/ adjust where the camera made some auto brightness corrections when the focus was made/moved to a darker object in the scene. It causes intermittent bright and dark lighting in the clip.
I realize both of these situations are my own fault, but I am still trying to learn how to adjust for them.
I tried using the Effect /Color Correction / Brightness and Contrast tool because this seems logical, but the results are not smooth. I set a key-frame on both sides of the problem point on the clip so I can stop/ lock in the effect from making changes to an area that is good/ acceptable. Then I move to the center point between the two key-frames I am holding as correct and make a brightness adjustment (creating a new key-frame). This sounds like it should compensate, but I end up with even more intermittent flashes of bright and dark.
Can anyone tell me if this logic is correct and is this the correct tool I should be using to make this sort of adjustment to a clip The adjustments are not smooth as I would expect from key-frame. And it appears the key-frames I set to hold what is correct are being auto adjusted.
I think there should be a metering tool that I could use to measure/meter Brightness (ie; 1-100) throughout the clip so when I see the brightness is varying away form my desire meter reading I could make an adjustment at that point where brightness varies to bring it back to the metered level I want to hold
Thanks for your help in advance

I've never used the Brightness/ Contrast adjustment. Curves and Levels work much better. Beyond that - if the aperture change is immediate, then split the clip on the respective point and correct each segment separately. otherwise it seems you do not quite understand how AE keyframes work. You don't "encircle" a problem, you just animate the respective parameters. In your example the only keyframe that actually holds anything useful is the one in the middle, the other two hold neutral default values. It's inevitable that you get additional brightness jumps because you are telling AE to revert to those defaults on the third keyframe, but the exposure is still wrong. Simply makes no sense. The rule of thumb is always to use as few keys as possible, especially on something as tricky as color corrections.
Mylenium

How to do Price Adjustment for PO issued?

Dear experts,
My user has already issued one PO with the unit price of $770 and also issued the GRPO under the price of $770. After that, the vendor said the actual unit price is $1000. How to do the price adjustment for the wrong unit price issued in the PO?
Kindly share with me. Thanks.
Regards,
Xavier

hi xavier,
GRPO - Goods Return
A/P Invoice - Credit Memo
previously you didn't mention A/P Invoice was already made. if A/P invoice is already made you need A/P Credit Memo to reverse it.
now, since adjustment is already done, is $230 is added to the same A/P Invoice and added to cost (qty * $230) that was base to GRPO? if yes, then your item cost is already corrected in A/P Invoice and also your Payable to your Vendor.
However if the adjustment is done, in other document like JE adjustment then you need to Credit Memo, then GRPO (Not base on PO) with $1000 price then A/P Invoice base on GRPO.
regards,
Fidel

Validation for Business place

Hi
How to create validation for business place in f-43, fb60, f-48
I know t/code GGB0, how to selectPrerequisite, check, message can you please give me details this is very urgent.
Thanks in advance.

Earlier i have given replay for same query so many times
Re: Business Place / Section Code Mandatory : How to?
you can write the following validation for your requirement.
Open GGB0, press financial accounting, press line item, press validation button, give your validation name, press step button give the step name then press to prerequisites. give the inputs in prerequisites as follows.
PREREQUISITES:
SYST-TCODE = 'FB60' AND BSEG-KOART = 'K' OR
SYST-TCODE = 'F-43' AND BSEG-KOART = 'K' OR
SYST-TCODE = 'F-48' AND BSEG-KOART = 'K' OR
BSEG-BSCHL = '29' AND BSEG-UMSKZ = 'A' AND
BSEG-KOART = 'K'
CHECK:
BSEG-BUPLA = 'YOUR BUSINESS PLACE'
In message
you can create the message class with the help of your ABAPer and assign the message or you can use the available message and put it as Warning or Error message.
after complete the above go to OB28 and put the active.
If want to feel dificulty take the aboper help.
don't forgat to assign the points.
If u find solution from our answer, please close the issue and assign points, otherwise ask your futher problem.
sai krishna

Adjusting for mic placement in Garageband

Similar Messages

Maybe you are looking for