Adjusting for red

been a long time since i have posted or even read anything here. sort of fallen off the photography wagon.
ran into a problem today that was familiar to me, so thought i would give it a shot here.
i have a canon EOS 1D MkII, a venerable body that has served me, with a couple of repairs, well.
however, i have always had difficult getting deep reds to appear correctly. friend remembers this problem with same body (which he no longer has). i cannot seem to find the right adjustments to get it corrected.
am using a calibrated cinema display.
rather than the deep rich red i expect, i get something with a slight magenta cast without the depth and richness that i have with the rest of the color spectrum.
the closest i get is working levels and white balance temp.
these are usually red flowers taken in bright daylight.
any suggestions?
Message was edited by: Forrest Jerome1

The only suggestion I have is the color brick > sample color > work with the H,S,L and range?

Similar Messages

Can't install Oracle 9i for Red Hat Linux AS3

I can't install Oracle Database 9i for Red Hat Enterprise Linux.
Please see messages following:
[oracle@rhas3 oracle]$ /mnt/cdrom/install/linux/runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/java. Please wait...
/tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
[oracle@rhas3 oracle]$rpm -qa|grep libstdc++|less
libstdc++-3.2.3-20
libstdc++-ssa-3.5ssa-0.20030801.41
libstdc++-devel-3.2.3-20
libstdc++-ssa-devel-3.5ssa-0.20030801.4
anybody know how to install for RH AS3, I have tried many time to find out the libraries but still not work and I've plan for RAC also.
Ched

Did you carefully go through all pre-req steps for install?
Oracle needs some "compatibility libraries" as well (compat-lib*). Here are packages for AS 10g, most or all of which apply to Database too.
Checking operating system packages: gcc-3.2.3-20,compat-gcc-7.3-2.96.122,compat-gcc-c++-7.3-2.96.122,compat-libstdc++-7.3-2.96.122,compat-libstdc++-devel-7.3-2.96.122,setarch-1.3-1,pdksh-5.2.14,sysstat-4.0.7,gnome-libs-1.4.1.2.90-34.1,libstdc++-3.2.3,compat-libstdc++-devel-7.3-2.96.122,compat-glibc-7.x-2.2.4.32.5
When required packages are in place, there's another error lurking, related to __libc_wait symbol.
runInstaller "boots" OUI, which includes running a JRE from tmp. This JRE (build 02) is broken, but you can setup to run another one via oraparam.ini and JRE_LOCATION. Download build 10 from Sun (google "jre 1.3.1 download").

Bridge CS6 How to turn off auto tone adjustment for the loupe?

Adobe Bridge CS6. 'Apply auto tone adjustments' is unchecked in Camera Raw Preferences. Yet every time I click on an image in the preview panel it does a tonal adjustment before it magnifies the image detail. I am viewing bracketed images and do not want any auto tone applied at any time while previewing images. How can I turn off all auto tone adjustment for the program - including the loupe. I never had this issue in a previous version. I'm on PC. Thanks for any help!

All 4 Default Image Settings are unchecked. Checking this further I have found this is only a visual issue in Bridge Preview. I have opened the same raw file before any adjustment had taken place (w/o using the loupe magnifier) in PS CS6 - and then again opened it after using the magnifier which did an auto contrast adjust on the image. Both files are the same in PS CS6. This is only a visual issue within Bridge (Master Collection CS6) on my Win7 64 bit machine. No issue with a standalone PS CS6 version on my XP 64 bit system.
There is no auto adjustment of the image until I use the loupe (magnifier tool).
Note my previous comment as to what happens when I use it. Thanks!
I have a feeling this is a bug. I have a Photography help group on fb and posed this question to them. I had mostly no issue responses but got this from another person. I checked after reading this and it is the same issue with me - this only happens with raw files, not jpeg. Here is his comment line.
Carl, I see what you mean, I have tried several adjustments to the preferences and none seem to work. The image automatically adjusts after a brief time. There does not seem to be any way to turn off the adjustment. I'm using Bridge CS 6 on a Mac. I don't think it has anything to do with camera calibration, but it only happens when using RAW files. I tried it on JPGs and TIFFs and it did not adjust the loupe image. Wonder what Adobe has to say
So - tThanks for any thoughts! So at least it's not going to be an editing issue - but it's a pain here. I use Bridge to edit my shoots and I often shoot bracketed images. While I cull images according to the histogram, I also do visual assessment and I can't have Bridge doing it's own thing on tonal adjustment.

FM to calculate Number of working days adjusted for an employee -ABAP HR

I have one requirement in which i have to Calculate "Number of working days adjusted" for an employee for a disability program.
In this context i wanna know, if just get difference between two dates (i.e the duration for which employee was compensated ) based on Holiday calender...Will this give give me "Number of working days adjusted" for an employee or i have to consider work schedule for an employee? If yes , Then please let me know sm FM to calculate number of working days between two dates speific to an employee.

check
HR_PERSONAL_WORK_SCHEDULE
HR_GET_QUOTA_DATA

No volume adjustment for video clips

Hi there!
I have noticed that the volume adjustment for video clips, set in the options pane of the clip itself, will not be respected by iTunes while playing the video.
Is there someone else with a similar issue or already with a solution?
Thanks in advance!

I've tested all versions since 10.0.1 (for PC) and none work. Versions 10.0.1 and below will allow you to change the volume adjustmant and the equalizer setting for individual videos. No answer from apple! You can try an older version like I did.

For Red LED's What does it mean

I don't have my manual and every once in a great while when I trun this beast on my puter locks no video no sounds I mean beeps but just for red LED's
My mobo is kt266 pro 2
tbird 1700+
kingston 512 CL 2.5

Here what manual says :
"Processor might be damaged or not installed properly or damage/Discharge Lithium Battery"
The battery, it refers too, is on the motherboard and keeps the adjustments on the Bios when you turn off the computer. Since the motherboard is new I don't think that it could be damaged or discharged. Check your cpu (processor). Ensure that it is properly cooled and that it didn't crack during the cooler installation.
You can download the manual from this site for more information.There are manuals for all models.

Why is there a limit on the number of times a "DVD player region" can be changed, and can it be adjusted for more region changes, or an indefinite number of region changes?

Why is there a limit on the number of times a "DVD player region" can be changed, and can this numbert be adjusted for more region changes, or an indefinite number of region changes?

Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

Automatic PO adjustment for pricing condition changes sap

Hello SAP users,
How to prevent automatic PO adjustment for pricing condition changes to purchase order items that are marked for deletion. Please respond.
Thanks

Hi,
Check the settings in below configuration:
SPRO>MM>Purchasings>Conditions>Automatic document adjustment-->Control doc. adjustment.
SAM

Adjust for Brightness Corrections the Camera made

I have some video clips where I am trying to make two types of corrections.
I am using Warp Stabilize to correct for movement in the way I handled the camera during the filming process. Warp Stabilize seems to do a fair job of fixing this, I can accept this for now.
Then I am trying to repair/ adjust where the camera made some auto brightness corrections when the focus was made/moved to a darker object in the scene. It causes intermittent bright and dark lighting in the clip.
I realize both of these situations are my own fault, but I am still trying to learn how to adjust for them.
I tried using the Effect /Color Correction / Brightness and Contrast tool because this seems logical, but the results are not smooth. I set a key-frame on both sides of the problem point on the clip so I can stop/ lock in the effect from making changes to an area that is good/ acceptable. Then I move to the center point between the two key-frames I am holding as correct and make a brightness adjustment (creating a new key-frame). This sounds like it should compensate, but I end up with even more intermittent flashes of bright and dark.
Can anyone tell me if this logic is correct and is this the correct tool I should be using to make this sort of adjustment to a clip The adjustments are not smooth as I would expect from key-frame. And it appears the key-frames I set to hold what is correct are being auto adjusted.
I think there should be a metering tool that I could use to measure/meter Brightness (ie; 1-100) throughout the clip so when I see the brightness is varying away form my desire meter reading I could make an adjustment at that point where brightness varies to bring it back to the metered level I want to hold
Thanks for your help in advance

I've never used the Brightness/ Contrast adjustment. Curves and Levels work much better. Beyond that - if the aperture change is immediate, then split the clip on the respective point and correct each segment separately. otherwise it seems you do not quite understand how AE keyframes work. You don't "encircle" a problem, you just animate the respective parameters. In your example the only keyframe that actually holds anything useful is the one in the middle, the other two hold neutral default values. It's inevitable that you get additional brightness jumps because you are telling AE to revert to those defaults on the third keyframe, but the exposure is still wrong. Simply makes no sense. The rule of thumb is always to use as few keys as possible, especially on something as tricky as color corrections.
Mylenium

How to do Price Adjustment for PO issued?

Dear experts,
My user has already issued one PO with the unit price of $770 and also issued the GRPO under the price of $770. After that, the vendor said the actual unit price is $1000. How to do the price adjustment for the wrong unit price issued in the PO?
Kindly share with me. Thanks.
Regards,
Xavier

hi xavier,
GRPO - Goods Return
A/P Invoice - Credit Memo
previously you didn't mention A/P Invoice was already made. if A/P invoice is already made you need A/P Credit Memo to reverse it.
now, since adjustment is already done, is $230 is added to the same A/P Invoice and added to cost (qty * $230) that was base to GRPO? if yes, then your item cost is already corrected in A/P Invoice and also your Payable to your Vendor.
However if the adjustment is done, in other document like JE adjustment then you need to Credit Memo, then GRPO (Not base on PO) with $1000 price then A/P Invoice base on GRPO.
regards,
Fidel

ColdFusion did not adjust for Daylight Savings Time change

Both my 8 and 11 machines did not adjust for DST over the weekend. The computer times look ok, but CF times are still an hour behind. We've restarted the server, which did not fix the problem. Any suggestions?
Thanks!

Do you have ALL CF Server updates/hotfixes applied? I don't _know_ that any CF updates included the new rules for DST changing; but that's the first thing I'd check, if it were my system.
What web server are you using? Built-in, Apache, IIS? Could there be a setting in there that might affect the DST difference?
Just off the top of my head.
^_^

Configuring startWebLogic.sh for Red Hat Linux 7.2

I was successful in configuring and executing startWeblogic.cmd, but have not been
so lucky getting the equivalent to run on Red Hat 7.2 using startWebLogic.sh.
For starters, even before I began editing startWeblogic.sh and just tried running
I received the following error:
: command not found
: command not found
: command not found
: command not found
startWebLogic.sh: line 59: syntax error near unexpected token `elif'
'tartWebLogic.sh: line 59: `elif [ ! -f $WL_HOME/lib/weblogic.jar ]; then
I've included both my startWebLogic.cmd and startWebLogic.sh files so that you
can see what I'm trying to port to the sh file. I'm hoping I'm close to getting
this to execute and run within Linux so please accept my thanks in advance to
anyone who might have some suggestions. Interestingly enough I was able to get
wls to start using ant, but that is obviously only good for my development env.
The point being I'm hoping I'm close to reaching a solution.
Below is what my startWebLogic.cmd file looks like:
@echo off
@rem This script can be used to start WebLogic Server. This script ensures that
@rem the server is started using the config.xml file found in this directory and
@rem that the CLASSPATH is set correctly. This script contains the following variables:
@rem
@rem JAVA_HOME - Determines the version of Java used to start
@rem WebLogic Server. This variable must point to the
@rem root directory of a JDK installation and will be set
@rem for you by the WebLogic Server installer. Note that
@rem this script uses the hotspot VM to run WebLogic Server.
@rem If you choose to use a JDK other than the one
@rem included in the disribution, make sure that the JDK
@rem includes the hotspot VM. See the WebLogic platform support
@rem page (http://e-docs.bea.com/wls/platforms/index.html)
@rem for an up-to-date list of supported JVMs on Windows NT.
@rem
@rem When setting these variables below, please use short file names (8.3).
@rem To display short (MS-DOS) filenames, use "dir /x". File names with
@rem spaces will break this script.
@rem
@rem jDriver for Oracle users: This script assumes that native libraries
@rem required for jDriver for Oracle have been installed in the proper
@rem location and that your system PATH variable has been set appropriately.
@rem For additional information, refer to Installing and Setting up WebLogic
@rem Server (http://e-docs.bea.com/wls/docs61/install/index.html).
SETLOCAL
cd ..\..
title WebLogic Server
@rem Set user-defined variables.
set JAVA_HOME=T:\bea\jdk131
if "%CLOUDSCAPE_HOME%"=="" set CLOUDSCAPE_HOME=T:\Cloudscape_3.6
if "%LOG_HOME%"=="" set LOG_HOME=T:\jakarta-log4j-1.2
if "%JIKES_HOME%"=="" set JIKES_HOME=T:
if "%BAS_ORACLE_HOME%"=="" (set ORAPATH=) else (set ORAPATH=%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\classes12.zip;%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\nls_charset12.zip;)
@rem Check that script is being run from the appropriate directory
if not exist lib\weblogic.jar goto wrongplace
goto checkJDK
:wrongplace
echo startWebLogic.cmd must be run from the config\blueagave directory. 1>&2
goto finish
:checkJDK
if exist "%JAVA_HOME%/bin/javac.exe" goto runWebLogic
echo.
echo Javac wasn't found in directory %JAVA_HOME%/bin.
echo Please edit the startWebLogic.cmd script so that the JAVA_HOME
echo variable points to the root directory of your JDK installation.
goto finish
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;%ORAPATH%.\lib\weblogic.jar;%CLOUDSCAPE_HOME%\lib\cloudscape.jar;%LOG_HOME%\dist\lib\log4j-1.2.jar;.\config\blueagave\serverclasses
echo off
echo.
echo ***************************************************
echo * To start WebLogic Server, use the password *
echo * assigned to the system user. The system *
echo * username and password must also be used to *
echo * access the WebLogic Server console from a web *
echo * browser. *
echo ***************************************************
@rem Set WLS_PW equal to your system password for no password prompt server startup.
set WLS_PW=xxxx
@rem Cloudscape-specific defines
set CLOUDSCAPE_DEFINES=-Dcloudscape.system.home=./config/blueagave/data -Dcloudscape.storage.pageCacheSize=200
-Dcloudscape.language.statementCacheSize=200
@rem Set Production Mode. When set to true, the server starts up in production
mode. When
@rem set to false, the server starts up in development mode. The default is false.
if "%STARTMODE%"=="" set STARTMODE=true
@rem Add the following -D option to the JVM WL start-up command (after %CLASS_PATH%)
to change
@rem the query execute mode. The default is JDBC_ONLY and the other choices are
EIS_ONLY,
@rem BOTH_JDBC and BOTH_EIS (the two "BOTH_XXXX options internally execute both
versions of the
@rem query but only the results of the _XXXX form are returned to the query submitter).
@rem -Dcom.blueagavesoft.query.ExecMode=BOTH_JDBC
echo on
"%JAVA_HOME%\bin\java" -hotspot -Xms192m -Xmx192m -XX:MaxPermSize=64m -classpath
"%CLASSPATH%" -Dweblogic.Domain=blueagave -Dweblogic.Name=baserver -Dbea.home=T:\bea
-Dweblogic.management.password=%WLS_PW% -Dweblogic.ProductionModeEnabled=%STARTMODE%
%CLOUDSCAPE_DEFINES% -Djava.security.policy==T:\bea\wlserver6.1/lib/weblogic.policy
%JAVA_DEBUG% weblogic.Server
goto finish
:finish
cd config\blueagave
ENDLOCAL
[startWebLogic.sh]

Thanks Micheal!
"Michael Young" <[email protected]> wrote in message
news:[email protected]..
Hi.
download here: http://commerce.bea.com/downloads/weblogic_server.jsp
installation instructions here:
http://edocs.bea.com/wls/docs61/install/index.html
Regards,
Michael
Help Needed wrote:
Hi All
Where can i download weblogic for red hat linux 7.2? Does that come
with
instruction on how to install it and if not where can i find the
instruction!!
Any will will be appricated.
Michael Young
Developer Relations Engineer
BEA Support

Calender adjusts for timezones when it shouldn't

Is there a way to configure the calender so that it doesn't adjust for timezones? To clarify if you enter and event in another timezone it will shift the time when you arrive in that timezone, for example if you enter a 7:30 event in Chicago when you are in Boston the Pre will display it as 6:30 when you arrive in Chicago. Calender events are always specified as an absolute time, they should never be adjusted for timezones.

See if Push Mail is turned on. go into settings>Mail>(YOUR ACCOUNT)>Advanced
Turn it off if its ON.

Java(TM) 2 SDK needed for Red Hat Enterprise 4

Hello List members,
I am installing open-xchange on my Red Hat Enterprise 4 box but getting error "no acceptable java compiler found - please install at least the Java(TM) 2 SDK."
JRE is installed in my system but even after a lot of research I am unable to find Java(TM) 2 SDK . Can anyone of you tell me where to download Java(TM) 2 SDK for Red Hat Enterprise 4. Its not in the SUN site as far as I know, I could be wrong.
Please help me.
Regards,
Vishal

I installed rhe4 and i have installed a lot of jsdk1.4.2-1.50 and later no any error and not collapsed java system but it has using GNOME consol avoid running system well you will changed GTK SYS.

Is there any optimal adjustment for Edge Sharpening?

When I mostly worked with PS I used an adjustment for sharpening portraits and another one for landscapes.
I wonder if someone could tell me a general good value for ·Edge Sharpening" with these two options working with Aperture.
Best regards.
iMac Intel Duo 2 Core Mac OS X (10.4.8)

I've saved several settings from which I select:
(weak) 50/33/66, 50/33/99, 50/50/99, 50/66/99 and 66/66/99 (strong).
Generally, on high ISO shots, I use weaker sharpening than on low ISO shots. Portraits also usually want less sharpening than, say, landscapes.
Otherwise I have no real rule of thumb. Depends on the image. I play with the sliders (which work quite well these days on my old G4 powerbook, as long as I don't have shadows / highlights enabled - thanks for that, Joe and team!) until I'm happy in this order: first the top slider, then the second one, and finally the third one.
Cheers,
Karl
Cheers,
Karl

Adjusting for red

Similar Messages

Maybe you are looking for