Adjusting Images in Smart Build

I have a series of images set in a Smart Build, and I want to adjust all these images (contrast, saturation, etc.). When I open Adjust Image - I can't make any changes to the smart build images. Does Smart Build enable this feature? I could just adjust them all in Photoshop, save the jpgs again, and drop them back in...but I was hoping I wouldn't have to do that.
Please let me know as soon as you can - I would appreciate it so much!
Thanks!

Have a look here. Only workaround I have found is to re-do the build. Send feedback to Apple via the Keynote Menu.

Similar Messages

  • Images in smart build open right justified

    Has anyone else seen this.
    I've just opened an existing Keynote08 file in 09. And all my smart build push images have become right justified and off center. I can't find anyway of putting them back into the center. Can anyone help?

    Have a look here. Only workaround I have found is to re-do the build. Send feedback to Apple via the Keynote Menu.

  • Print Images within a smart build

    I am creating a presentation for a client that wants to view all of the images within each smart build on a printout. Is there an easy way to do this that doesn't require me to manually show each build?

    I've done that but it does not print each image in the smart build. Works for everything else.

  • Use images with instant alpha in smart build?

    I have a few logos with solid backgrounds that I would like to use in a smart build with the backgrounds removed. I can put the logos in the smart build with and I can also remove the backgrounds using instant alpha. I cannot figure out how to put the logos with the background removed into the smart build. Perhaps this is not possible since the instant alpha effect is non-destructive and doesn't truly change the image file? Any help or suggestions would be appreciated.

    Check this thread.
    http://discussions.apple.com/thread.jspa?messageID=6497364&#6497364
    What you have to do it "set" the image WITH the Instant Alpha before using it in a Smart Build.

  • Image size is too big after "Smart Build Grid"

    The Smart Build Grid feature is awesome. Unfortunately, I have one issue with it- it sometimes zooms the images too much when using the grid feature.
    Specifically, I have a 4 x 3 matrix of rectangular images. With each Zoom from the grid, Keynote zooms too much, so that the center of the image is nicely displayed, but cuz it zooms too much, important info on the sides of the image is cropped out in the magnified image.
    How can I set Keynote to zoom so that the zoomed image is only as big as the longest axis relative to the slide (thereby displaying all information)?
    Keynote 4.01, OS 10.4.11, PPC G4 867 MHz.
    Thank you very much!

    But the image is in
    <mx:DataGridColumn headerText="Input Status" ...
    How can it be fixed?  Please provide your advise.  Thanks.

  • Remove background from Smart Build images

    Hi,
    I've just started creating my first project with Keynote, and so far it's terrific. The question I have is, is it possible to use the alpha tool, or something similar to remove backgrounds from images that I'm using for a smart builds effect.
    Thanks,
    Dave

    Welcome to the discussions, Decaffeinated1.
    The problem you're seeing is specifically with how Keynote copies images. Neither Pages nor Numbers has this problem. The problem and the solution is described here.
    http://www.keynoteuser.com/news/?p=256
    Basically, your choice is to copy through Pages or Numbers (or iWeb) OR to copy another object which will force Keynote to adhere to the transparency set with Instant Alpha.

  • New bug introduced with Keynote 5.2 - Set timing and order of each build has stopped working properly on Smart Builds

    Hi there,
    We're heavy users of Keynote and have noticed a new bug has recently been introduced into something that was stable. I think it has emerged in Keynote 5.2, could have been Keynote 5.1 also.
    It's in the area of Set Timing and Order of each build when used on a Smartbuild. You can no longer set the Start Build field for each instance within the Smart build when the instances are interspersed between other items. The Start build field is just blank and unselectable.
    To see this :
    1. Create a bullet point list with 4 lines
    2. Set build to Appear
    3. Set "Set Timing and Order of each Build" to on
    4. Create a Smart Build - set to flip
    5. On the Smart Build Set "Set Timing and Order of each Build" to on
    5. re-order the items in your Build Order so that they alternate between the bullet point and the smart build flip
    At this point, you used to be able to set the bullets so that they Started on Click and then set the smart builds to Start with previous. This gave you a nice and very useful effect where you could click to reveal a bullet point and at the same time flip in a corresponding image. We've used this loads of times in our company presentations.
    With a recent keynote update ( I think 5.2 maybe, could have been 5.1) this functinality has been lost. have tried it on Lion and Mountain Lion and it's not an OS issue, its a Keynote issue.
    Could anyone from Apple acknowledge that they know the issue and suggest if it will get fixed? Right now we're hunting round for an old Keynote 9 DVD so we can install a pre build 5.2 version.
    Thanks

    Hi glennelliott72,
    I've noticed the bug you describe and to me it's very irritating.
    I also found some differences in the build menu between the last release and the previous one, and between the Mac OS X and iOS versions. For instance, the blast build doesn't exist anymore in Keynote 5.2 but it's still in the version for iOS 6.
    What is your experience about?
    I currently use OX Lion.
    Thank you

  • Can smart builds include other actions? Or can I copy a build?

    I have a smart build with dissolves in and out. A few slides do need bullet builds. So far it seems that I'll just have to build the presentation slide by slide in order to incorporate the different builds. Any suggestions?
    Also, a possibly related question: can I copy a build from one slide to another? I hoped that copying/pasting the build details would result in the same action for the new slide, but no luck so far. If I could do this, it would expedite the main question, as I could copy the dissolve in/out from Slide 1, then paste it into, say, all 20 slides, then modifying only slide 14.
    Thanks,
    cb

    Sure, Tulse. Say I have 20 slides. I know I can do a smart build that will let them all dissolve in/out, and I can loop it, to let it run on its own. All good. But a couple of the images need to expose bullet-by-bullet. So far, it seems that once I use a smart build, I can't change any individual slides.
    Re: copying a build, I'd hoped that the transitions might transfer from slide to slide, as a spreadsheet changes references ("B2+C2" pasted in subsequent rows below becomes B3+C3, B4+C4, etc. So if I'd copy and paste a particular build (dissolve in/out), subsequent slides would adapt likewise, and then for the two exceptions, I'd just build them separately.
    If I have to build 18 separate identical dissolves in/out, and two with bullet-by-bullet, I will. I'd just rather see if I've missed some detail that would expedite it.
    Thanks,
    cb

  • How to make the Keynote Turntable Smart Build work properly?

    I've created a single slide presentation using the Keynote's Turntable Smart Build and inserted it in iBooks Author (Insert>Widget>Keynote), but when previewed at iPad, the effect does not work properly. The images used on the presentation just changes between themselves, fading in and out simultaneously.
    Has anyone managed to use this feature successfully?
    Thanks

    unsupported builds will not perform as intended and as Apple says, "will be replaced with Dissolve."
    hope this helps...

  • Smart Builds on master slides?

    I'm trying to build a "portfolio" template where i can create case studies out of a master slide template. Some of these case studies have many images in them, and Smart Builds are the PERFECT tool for cycling through them on a single slide.
    However, when i place a Smart Build on a master slide, its contents are not accessible in the slide show itself.
    This seems like a really odd oversight to me, since one of the most useful ways to use Smart Builds is on master slides. Unless, of course, i'm missing something and it is actually possible to use Smart Builds in this way.

    Just took a peek at Smart Builds and now I'm wondering how editable they are (ie are they based on .qtz files). Anyway, you can workaround masking on smart build objects by masking them first, copying, pasting into Pages, copying from there, then pasting back into the Drop Zone (click to highlight it, then paste). It should work directly in Keynote, but, hey, that's why we love Keynote!
    I posted about the problem here.
    http://www.keynoteuser.com/news/?p=240

  • Is there a way to Instant Alpha Smart Build photos?

    In Steve Jobs' iPhone Keynote '07, he introduces the iPhone as three separate devices: an iPod, Phone, and Internet Communicator. He has an icon for each, and uses the Cube Smart Build effect. I tried doing the same but the white border remains around the pictures I dragged into Keynote. I tried to eliminate them by using Instant Alpha, but it won't let you use it to photos in Smart Build. Does anyone know how to get the border off? I want my Keynote to look as professional as Steve's and I don't want this slide to bring it down, any help is greatly appreciated!

    For some reason, although the Smart Builds do not let you use an Instant Alpha-ed image alone, if you group it with another object, or even just copy it with another object, the transparency is preserved. The workaround is therefore to create a transparent object by removing its fill, putting this over (or under) your Instant Alpha-ed image, and copying the two of them together. Then select the image well in the Smart Build and paste in the two images. Your photo should have its transparency preserved.
    Presumably this is just a bug that will be fixed in future versions.

  • Smart build animations in Keynote 6.5

    I have Keynote 6.5 and I'm looking for the smart build animations I saw in several Youtube tutorials.  Help!

    No such feature in Keynote 6.5, this was an effect available in Keynote 09 for photo images.
    Choose from the Builds, Actions and Transitions that are available in the Inspector for image effects.

  • How to make Smart Builds repeat?

    im sorry if this question has been answered already,
    but how do you repeat smart builds, so that they never end, until you move to the next slide?
    (for example, using the 'thumb through' smart build the animation ends when the last picture is reached, when i actually want the cycle to repeat)
    (oh, and i've tried copying and pasting images to add them to the end of the smart build, but the unfortunate side-effect is that the file is now HUGE!)
    thanks,
    'kalapaka'
    Message was edited by: kalapaka

    Welcome to the forums!
    Smart Builds can't be looped directly. One workaround is to create a presentation that just has your Smart Build, export that presentation as a QuickTime movie, and the place the resulting movie in your main presentation and set it to loop. (To make sure the looping is transparent to the user, be sure to put the repeat the first image as the end of the Smart Build.) The results you get should be pretty good.
    Alternatively, if you don't want to go the movie route, you can create the single slide Smart Build presentation as outlined above, put a hyperlink on it to the main presentation, and then set the Smart Build presentation to loop. To do this, you have to set the Smart Builds to advance automatically, set the slide transition to transition automatically, with a delay (this is critical), and it the Document Inspector set the slideshow to Loop. The slide transition delay is necessary because the hyperlink will only work during this delay, and not while the Smart Build is actually running. If you set the delay to the same delay as used between Smart Build images, it will not be obvious. You can also set the hyperlink object so that it is transparent, and thus also will not be noticeable by the audience. With this setup, the presentation will happily loop continuously until the hyperlink is clicked, although the hyperlink can only be clicked at the end of each Smart Build cycle.

  • Synchronizing text with smart build

    Hello,
    In my presentation I have several smart builds with images in them. Is there a way to add captions to the smart build so that they'd be synchronized with it? I want specific captions to appear alongside specific images. Is this possible?
    thanks in advance for any help,
    Mikolaj

    The simplest way to do this would be to group the caption text with an image, and then place that grouped object into a smart build. In this way, you can put the caption directly with the image. Note that the caption does not have to even be on the image -- it can be below it or above it or beside it, and it will show up correctly, with transparency where transparency should be.
    If you want to use a separate build for the captions, you can set the timings for each stage of a smart build separately (check the Set Separate Timings for Elements option in the Build Inspector). Once you've done this, you can intersperse other builds with the smart build stages by interleaving them in the Build Order drawer (revealed by clicking the More Options button).

  • Keynote Smart Build gallery is missing

    I am trying to edit images in a Keynote Smart Build. I have done this numerous times previously but now the drag-and-drop gallery is missing so I can't rearrange or delete images. Is there any way to get the gallery box back?

    Gael, What did you have to do to bring back the Smart Build drag-and-drop gallery? 
    If your plea to Apple is about the changes to Keynote in the new version (6.0) that was released with Mavericks, you might want to also submit your feedback to Apple here:
    http://www.apple.com/feedback/keynote.html.
    Dale

Maybe you are looking for