Adjusting Left And Right Balance for INPUT - SB Audigy 2

Hi Guys,
I'm using an SB Audigy 2 ZS with the latest drivers. I realize that it is possible to adjust the left/right balance for speaker OUTPUT, but Is it possible to adjust the left/right balance for the inputs? I'm doing some recording and I want to set different input levels for the left and right side of the CD Digital In as well as the Aux Line In. So either either a way to control left/right input balance or seperate input levels for left/right would be helpful.

Thanks in advance,
Steve

Thanks but I need real time. If I use a mic for the right input and a seperate mic for the left input I want to be able to set the optimum recording level for each side/mic. If I just set the level for the louder of the 2 mics then the other mic level on the other side is set too low You would think that Creative could have included this as a software control.
Also, if I record using the "Digital Input' and the 'Aux Line In" at the same time then you must select "Record What You Hear" from the Creative Control Panel. Both sources are mixed togther, if I could set the CD Digatl output to left side only then I could record CD Digital on the left side and Line Input on the right.
I just wish the Audigy could do this as it would be a cheap software control, I don't won't to buy another soundcard.

Similar Messages

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

Xpath expression in Left and Right operand for Receiver determination

Hi Experts,
Is it possible to use an Xpath expression in both the Left and Right operand inside the Receiver determination e.g.
(/Message/line/IDNumber = /Message/line/IDNo)
Any help will be appreciated.
Thank you,
Brendon

in standard receiver determination you can only specify value for the right operand.
that is one of the reasons you go for enhanced receiver determination
as mentioned in the sap help
If you are using the condition editor to define receiver determinations or interface determinations, you can only use the expression editor to create an expression for the left operand. You must specify a value for the right operand.

I am having major problems with my trackpad on my macbook pro. I can no longer press down on the bottom left and right corners for it to click and follow my command. Please can anyone help?

I am having major problems with my track pad on my macbook pro. Even though my settings haven't changed...my trackpad is no longer responding as it did before. The left hand corner no longer clicks when I press it and my personal commands which I set up in preferences no longer seem to be workin. Please help!

Some websites have an internal mute or volume setting. If that's not the issue, see below.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane.

Left and right trim all af:inputText fields

Hi,
ADF 10.1.3.4
we have a requirement to left and right trim all input text fields in the application. Is there an easy way to do this?
Thanks,
Mike

Hi...
If you want to get the values after a request was send, you can do it simply in the following way:
import java.util.Iterator;
import java.util.Map;
import java.util.Map.Entry;
import javax.faces.context.FacesContext;
import javax.servlet.http.HttpServletRequest;
HttpServletRequest request = (HttpServletRequest)FacesContext.getCurrentInstance().getExternalContext().getRequest();
Map<String, String[]> requestParameters = request.getParameterMap();
Iterator iter = requestParameters.entrySet().iterator();
while (iter.hasNext()) {
Entry entry = (Entry)iter.next();
String key = (String)entry.getKey();
String value = ((String[])entry.getValue())[0];
if (key.contains("<Your HTML-Element Id>")) {
// trim your value
}These code you can put into your submitAction in the backing Bean where your inputfields are locaded. In the request are a lot of data and you dont want do trim all of this. The <Your HTML-Element Id>-String is a string you can locate your inputfields. For example "form1.inputField1". If you render the page, you can look at the HTML-Element Ids to get your Ids. Maybe you can use "key.contains("form1")" to get all fields in Form1.
Best regards
Majo

True Stereo Left and Right Separation from Mac

Hello All,
This is quite long so please be patient.
I am trying to figure out if there is a way to get "true" left and right playback for split tracks through iTunes. By "true" I mean that neither the right track bleeds through the left or left through right. I use a lot of split tracks in our church and am trying to do it straight through iTunes.
I tested it with a stereo feed coming from the headphone jack to two independent speakers playing through iTunes. The instruments come out the right and the vocals come out the left. When I unplugged the left speaker (vocal) I could hear the vocal bleeding through the right speaker.
To further test this I burned a CD of the same song, played it through a stereo and could separate the left and right audio. I played the same CD through iTunes and unplugged the left speaker and could hear the vocal bleeding through the right speaker.
One last test, I opened Quicktime and selected the same track from the CD, played it through Quicktime, unplugged the left speaker and the vocal did NOT bleed through the right speaker.
So lesson learned, unless I am missing something - iTunes cannot really separate left and right signal from mp3's on the hard drive or burned audio on a CD.
By the way, if anyone knows how to accomplish this true split I would be grateful to hear it.
Thanks,
Greg

Ok.... I did some further testing.
I went back and noticed that in preferences under playback there is a checkbox for sound enhancer. With this checked you will get bleed of the left channel into the right channel. With it unchecked you will get the separation needed to play split tracks. Looks like I answered my own question. Hahaha.
Thanks everyone that looked into this,
Greg

How to adjust the left and right Margin in PDF

Hi,
I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
Thanks,
Malli

Hi,
there are only two joins available for InfoSet in BI.
For more details about Infoset joins you may refer following SAP documentation or serch at forums.
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
I hope it will help.
Thanks,
S

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns.

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns. Help please.

If you look closely at the top of the canvas pane, as you move either of the boxes (green or red) there is an indication of pixel positions... "top, bottom, left, right," and "scale."
Admittedly, it doesn't seem as if you can "enter" the dimensions with your keyboard, however, as you move the boxes, you have a real time indication of the boxs' locations.
(I couldn't take a screen shot, as you have to actively move the box with a mouse or other input device... thus, I could not also take a screen shot with same device.)
I hope this helps.

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the maste

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the master, and I cannot get the margins to alternate at print time. The larger margin is always on the left. Can anyone please help me on this, as I have spent hours and lots of ink.

Set up as facing pages with a larger inside margin.

Left and right channel panning for drummer backing tracks in Garageband - HELP

Hi there
OK, so I've finished my song on garageband that I've recorded with a USB keyboard with many STEREO keyboard parts and a click track.
I need to be able to mix down to the following specification for my drummer.
Left Channel - Mono keyboard sounds (to goto PA)
Right Channel - Same Mono keyboard sounds plus click track (to be heard through headphones)
So basically the keyboard will be the same mono track at the same volume playing through both the left and right. I cant simply put the stereo keyboard sound in the centre as that would mean the drummer would get SOME parts of the keyboards stereo fields and the PA would get the other parts of the stereo field so it wouldnt sound right.
Any ideas how to do this?
I hope I've explained myself OK

I need to be able to mix down to the following specification for my drummer.
Left Channel - Mono keyboard sounds (to goto PA)
Right Channel - Same Mono keyboard sounds plus click track (to be heard through headphones)
Here are instructions on how to split a stereo track into mono tracks:
http://www.bulletsandbones.com/GB/FAQPages/StereoToMono.html
On top of this, you will want to re-import the mono keyboard track back into Garageband, duplicate it onto a 2nd mono track, then add the click track (on a separate 3rd mono track of course). Then pan one mono keyboard track hard left, and pan the other mono keyboard track hard right and the click track hard right as well. Export as normal and everything should be good.

I am being charged for 3 GB that apparently Verizon hadn't caught up on that I had used!! The last night of my cycle I called and checked and I had .5 GB left and right before midnight when the cycle ended it caught up on 3 GB!! I now have to pay for this

SO CRAPPY!!! SO FED UP WITH VERIZON!! WE ARE GETTING SCREWED OVER!! I am being charged for 3 GB that apparently Verizon hadn't caught up on that I had used!! The last night of my cycle I called and checked and I had .5 GB left and right before midnight when the cycle ended it caught up on 3 GB!! I now have to pay for this data I know I did not use! I never have my data on!! Now it says I used 7 GB last month!!!

Data usages are always estimated...I don't believe any carrier post data usage in real time. I've had my data increased due to a large chunk being unaccounted for at the time of my cycle. Thankfully when I'm billed for it...it has never pushed me over my limit.

Left and right mouse coding for games

Hi
Can anyone point me in the right direction on where to find actionscript 2/3 coding for left and right mouse clicks for gaming. I am a student and want to design a game that will use both left and right mouse clicks on a object that will give different results depending on which mouse click you had made.
For example on a red object you click right, on a blue object you click left. Depending on how you clicked on a object will determine the next step in the code.
Does this make sense?
Cheers
Beth

I believe there is no method provided for isolating right clicks with a mouse in Flash. The right click is reserved for pulling up a menu and there are no properties associated with it in the code.

How can I separate Left and right audio channels in labview 8.5 tia sal22

How can I separate Left and right audio channels in labview
8.5 tia sal22
Greetings All
I have a working Labview vi that converts a math formula to an
audio signal. I would like to have the
right and left audio channels playing different math audio signals is this
possible?
Example
Right channel -> plays the audio signal created by a math
formula
Left channel -> plays the audio signal created by another
math formula with adjustable phase control
I’ve included a VI with a working audio and math formula but
I’m not sure how to separate the left and right channels.
I’m using labview 8.5
I looked up a similar question on the
support board and it said” use an instance of the the Sound Output Write that
has a 1D waveform data type input (i.e. Sound Output Write (DBL)). Each
element in the array would correspond to a channel.”
But I’m not exactly sure what he meant. I’m using a formula to generate the wave file
Tia sal22
Attachments:
fixed mathscript formula to sound test.vi ‏680 KB

Sorry it took so long to get back. Here's the new VI with it splitting out the left and right channels.
I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops. I increase the buffers
but I still get the clicks and pops. I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in. Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
I'm using labview 8.5
And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
tia sal22
Attachments:
lvt_audio_realtime-out left right device ID test.vi ‏68 KB

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

Why after i update my left and right arrow keys stop working

my left and right arrow keys stoped working after i updated to Mavericks now the dont work

Hello ccombs2014,
It sounds like 2 of your keys are not working after updating to Mavericks. I found this section of an article for you to help troubleshoot this issue named:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thank you for using Apple Support Communities.
All the best,
Sterling

Adjusting Left And Right Balance for INPUT - SB Audigy 2

Similar Messages

Maybe you are looking for