Adjusting music volume

Is there away to fade music in and out during an iphoto slide show? Should/can it be done in itunes before the track is imported?

Is there away to fade music in and out during an iphoto slide show? Should/can it be done in itunes before the track is imported?
Not in iPhoto or iTunes. You can do this with other apps that can make slideshows like PhotoToMovie, iMovie, or Final Cut
Regards
TD

Similar Messages

When i adjust music volume, wadsapp volume changes too.

I just changed my phone to iPhone 5s from iPhone 4s. I've been listening to music and obviously i wont be listening to music with 100% volume, then i realized when people wadsapp me, the tone was very soft. I played around a little and realized that the volume from Music affected my wadsapp's tone volume too!
When i was using my iPhone 4s changing my music volume doesnt seem to affect my wadsapp tone tho. I've also disabled change with button, so SMS volume wasn't affected, only wadsapp.
Anyone knows if there's any way i can solve this? Else i'd have to keep adjusting the volume after listening to music -_-

Event Video Guy wrote:
you are a life saver
Event Guy,
Glad it helped. (I also do not like iTunes to mess with the filenames.)
Enjoy the music!
Ed

Music volume control not working sometimes

Device: Lumia 720 (Windows Phone 8)
Have anyone with a Lumia 720 experienced this particular problem when adjusting music volume no change happens in volume of the music played?? Thus is making my pluck my hair in madness!! Please advise on any possible solutions. Thanks in advance!
Solved!
Go to Solution.

Thank you for clarifying me, garym11! I have tried the soft reset as adrianhughes has suggested. Will see if it solves my issue! Thank you everyone for helping me with this issue!
Kudos to all of you!!!

Adjusting theme music volume in iDVD5?

I've created a couple of videos using FCE HD and placed it in iDVD 5.0.1. I'm using the same music for the beginning of the videos and in the theme menu. Our TV has a "normal" volume range when the setting is between 16-20 on the volume slider.
When the videos are playing the volume is perfect when the TV is at those settings, however the theme music is WAY to loud when going to the menu. I can't seem to find a way to adjust the menu theme music volume in iDVD. Yes I've tried to find it in the iDVD help menu. There only appears to be a speaker icon that turns the music on or off and a volume slider in the preview remote control. Is there a way to do this within iDVD 5? If not, has this feature been added to iDVD 6?

Is there no one who can answer this? Sorry to be pusing by I have a preview of my project in front of a committee tomorrow and would like to fix this if possible. I know I could take the sound file into another app and lower the volume then save it and use that but that isn't very Apple-like. There must be a way to adjust the sound level for the theme music.

I bought a EarPods October last year in USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can lisence music but can not adjust the volume and answer the phone, can I get a new one or what can I get?

I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?

Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??

IPhone 4S - after 6.1.1 update, cannot adjust ringer volume, and odd music playback behaviour

This is a minor issue that'll probably end up in the hands of some apple tech, but I'm curious to see if anyone else is experiencing this.
After updating my phone to 6.1.1, I noticed that occasionally I did not hear anything when playing music through earphones. An attmept to adjust the volume simply displayed the "ringer" icon and no volume meter. When I launch a new song from stopped (not paused), there was no sound or any ability to control it. I unplugged the earphones; the play icon remained, it normally disappears indicating a pause. Plugged back in and music started coming through.
Text/Ring tones are still audible; good because I use it as an alarm clock. The phone is behaving as though it were "docked" though the music playback thing is just weird. I haven't tried playing music while it is actually docked yet.
Will try a restore tonight after work.

Ok, so I found this thread in another part of the forum and thought "hey maybe I should try that". I borrowed a can of compressed air from the IT guys and fired it into my phone's dock port. A few particles of who-knows-what came flying out. I've been testing it pretty thoroughly for the past hour, so far it seems to be back to normal. How a dirt particle can short the docking circuitry into thinking it's docked, I have no idea, I'm not an electronics expert...
Anyone having the same issue, go grab a can of compressed air, blow it into your phones ports (both dock and headphone jack), or try the toothbrush thing in the above link. If you use a dock regularly, keep it clean!

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable") and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
iPhone 4s iOS 5.1.1 (9B206)
Carrier AT&T 12.0
Modem Firmware 2.0.12

HT5882 Can't adjust the volume on my iPhone 5s when in doc

I have my iPhone 5s in the doc and my headphones plugged into the back. I can't seem to adjust the volume. It is wayyyyyy too loud. Can you help me?

I had the same issue. I also couldn't hear any music or sound from apps and no sound when I typed a text message. But ringer worked which was odd. I sent in for repair and Apple sent me a replacement device.

Can't adjust the volume while using DJ controller

I've got a DJ controller. I just hopped from Windows to MAC (Pro Retina 13). I basically use Traktor DJ whenever I mix. Normally when I'd quit the program for DJing, the controller kept working - so I could play music via youtube through my speakers.
And just control the volume overall with the volume keys. Now that I'm on MAC, the DJ program works fine and I can control the master with a knob, but as soon as I quit the DJ program - It plays music through youtube and iTunes just fine, the only thing is it won't allow me to adjust the volume in any way.
The controller is mapped to a program, I can't use a master knob to adjust the volume out of the program...
Whenever I try to adjust the volume with the F11 and F12 keys it just shows an O with a slash through it.
I really want to control my volume through my mixer, please help!!!

Have you by chance installed an app called "Boom"?

Headset too loud and other applications no longer adjust the volume

So I buried out my Speed-Link Medusa 5.1 USB headset and tried it out with Linux. Worked reasonably well, I plugged it in, set the headset as primary sound output with asoundconf as written in the wiki and rebooted.
Now I have two problems:
a) I had to lower the volume to about 5 percent or they would blow my brains out.
b) Sonata, Mplayer and similar software can no longer adjust my volume. Sonata simply shows the muted Icon eventhough it's not muted and Mplayer always shows full volume and I can't do anything.
Hope you can help me.

mine is also pretty loud with linux, either i have to lower the master volume in alsamixer to a level where my sound system is not loud enough or i have to stay between 0.5 to 2 with the medusa nx (it is the new model). both are connected to the same plug in my xonar d2 soundcard.
anyway it is a great headset for gaming and even music is not bad with it (and remember...i am a hifi-freak )

Adjusting Audio Volume Levels

Often, one has Audio that is too loud, or too soft. Sometimes, they have added a music Track, that needs to drop down to clearly hear the dialog from another Clip. While there are Audio-editing programs, like Audition, SoundBooth, and even the free Audacity, PrE, or PrPro can handle such adjustment just fine. These adjustments can be made for the entire Clip, or can be Keyframed over time.
First method, and not one that I recommend, is to adjust the Audio Gain of the Audio Clip. This is done by either Rt-clicking on a separate Audio Clip, or by first Alt-clicking, and then Rt-clicking on a Muxed Audio Clip (Multiplexed with both Video and Audio in one file). Then, one would choose Audio Gain, and adjust that. This method will also allow one to then adjust the Volume by a greater amount, and has the bonus of increasing the Waveform Dislay vertically.
The next method is to look at the Audio Clip (or the Audio portion of a Muxed Clip), and click-drag on the yellow-orange “rubberband” for Volume, and move it up, or down. This can be Keyframed, but the next method is much better and more precise, in my estimation.
My first choice is to adjust the fixed Effect>Volume. This is done from the Effects Control Panel, and it is very easy to Keyframe these adjustments over time. This is much more accurate, and actually easier, than click-dragging the rubberbands in the Clip itself. Accessing the Effects Control Panel is slightly different, from PrE to PrPro. In PrE, one would Select the Audio Clip, then go to the Effects Tab, and choose Edit Effects, locating the Volume Effects and twirling it open to view the slider. In PrPro, if one does not already have the Effects Control Panel in a Pane in the GUI, it would be accessed from Window>Effects Control Panel. With the Audio Clip Selected, one would locate the fixed Volume Effect, twirl that open, and make the same adjustments, including Keyframes, if necessary. These will be Clip Keyframes, and will follow that Clip, where ever you move it. This is a difference from the next method.
My other choice would be to use the Audio Mixer (Window>Audio Mixer, if not open), and to automate the Volume settings. This is accomplished by playing the Timeline and adjusting the sliders for Volume for each Track. In PrPro, one would first set the Send to Write, or Touch, to make those adjustments, then switch back to Read, when done. There are no adjustable Sends in PrE, so one is always in Read, until adjustments are made, and then it’s set to Write, but you will not see this change. After you are done, you can playback the Timeline, and watch the slider(s) automatically move. These will be Track Keyframes, and will remain on the Track, regardless of what Clips you add/remove from that area of the Track. Unlike the Clip Keyframes, these will NOT follow the Clip.
One can toggle the Keyframe of an Audio Track between Clip, or Track. Also, the default frequency of Audio Track Keyframes in PrE & PrPro is a bit high, in my opinion. I drop these down a bit in Edit>Preferences.
For the Keyframing, one can alter the Velocity of the Keyframes to Bezier from Linear, and the adjustments will be a bit smoother. Besides the Bezier, one can use Ease-Out and Ease-In, which are Bezier, but basically in a Preset. In PrPro, one has several different Bezier options. In PrE, one is a bit more limited.
For setting the Volume, I recommend that one only glance at the Levels Meters (unless they are peaking in the red), and instead use a pair of high-quality headphones (noise canceling models are worth the money), or fully calibrated studio monitors. Let your ears make the decisions for you, as the dB settings should only be a starting point.
In PrPro, one can also Rt-click on the Audio Clip, and choose Edit in Audition (if you have it installed), or Edit n Soundbooth (if you have one of the suites).
Here is a look at Audio Keyframes in PrPro 2.0. Things are similar in PrPro later versions, and also in PrE, with the above noted differences:

Here are some AdobeTV tutorial links for Premiere Elements Audio:
http://tv.adobe.com/watch/learn-premiere-elements-11/adding-and-customizing-an-audio-effec t/
http://tv.adobe.com/watch/adobe-digital-school-collection/audio-mixing/
http://tv.adobe.com/watch/learn-premiere-elements-10/get-professionalquality-sound-through out-your-movie-/
http://tv.adobe.com/watch/premiere-elements-9-how-tos/enjoy-a-perfect-balance-of-audio/
Hunt

Adjusting the volume brings screen light on.

I recently got a new iPhone 4s from Apple due to a technical fault with my old one, once I restored it from my back up and added songs to the phone, I noticed that whenever I have headphones in and playing music, when I adjust the volume either by the buttons on the side of the phone, or on the headphones control the screen on the phone lights up. I never had this with my previous phone, I cant seem to find any setting which will turn it off. It's annoying as it doesn't help the battery life.
Has anyone experienced this or knows how to prevent this from happening?
(the iPhone software is up to date & not jailbroken)

i dont understand why there are so many issues with peoples 5800
i have none....ABSOLUTELY NONE!!!!
i know youve said youve done nothing with the settings but can you try
settings.....phone.....phone management....auto keyguard....change that to 1 min
(01:00) or just make sure it isnt some bizarre number......
also try to see if you have a correct setting in "light time-out"
settings.......phone....display........light time-out
make sure no bizzare number is there either.......
hope this helps

I can't adjust the volume on my IPhone! HELP!

I can't hear any alerts and the volume doesn't adjust when I push the side buttons. I do not have the sounds locked and I have the feature on to allow adjusting the volume with the buttons. When I push the side buttons the ringer icon comes up but the volume wont adjust.

I had the same issue. I also couldn't hear any music or sound from apps and no sound when I typed a text message. But ringer worked which was odd. I sent in for repair and Apple sent me a replacement device.

Music volume discrepancy between different Ipods

I have an Iphone 2G an Ipod Touch and lately i bought an Ipod Classic with 160GB in order to be able to upload most of my music and have it all with me all the time.
It took me quite a lot of time to create my own playlists, especially to adjust and match the volume of each track.
in itunes i adjust the volume with the slider on the options tab if necessary. i can hear the result directly in itunes and i get more or less the same result on my ipod touch and on my iphone. but on my ipod classic the tracks get a completely different volume. tracks that i had to turn up to 100% completely in order to make them sound "right" in itunes are horribly loud on my ipod classic. they are 4-5 times louder than an unadjusted track. i am not sure if this is really intended, i assume it is a bug, as the track-volume i get from my ipod classic doesn't reflect the adjustments i did in itunes.
i tried turning on and off automatic volume adjustment on the ipod, but it didn't change anything, the tracks which should be slightly louder are much too loud now.
i didn't find any workaround for this, as i would need to drag all tracks twice into itunes and adjust them differently if i want to sync them for an ipod touch or an ipod classic.
i hope someone can help, but for me it sounds definitely like an overlooked firmware bug.

it is turned off of course, otherwise itunes will try to adjust the volume automatically, which never really worked when i tried it.
i would prefer to adjust the volume manually for all selected tracks.

Background Music Volume for imovie '08

So I've added background music to a few clips. I know how to mute the clip volume (so that you just hear the background music), and I know how to duck (so that you can adjust the clip volume louder or quieter than the background music), but how in the world do you actually lower the volume of the background music? I just can't figure it out.
Thanks for any advice.

Thanks for the tip. It seems to actually work a little different on iMovie '08 though. I just highlight the background music clip then bring up the audio adjustment window and adjust it with the top slider. I noticed on the apple website tutorial the inspector was at the top left like you mentioned, but that's not how it looks on the '08 version.
But then another thing that was messing me up was that I had added the music as a voiceover. Dragging the music file and placing it exactly between or over a clip makes it a voiceover which looks like a green bar below the video clip or clips. So first I had to delete that then grab the music file to the blank area at the right side of the video clip. This strangely put the music at the very beginning of the project, so I had to grab the top left corner of the beginning of the music clip then drag it to where in the project I wanted it. This apparently is called pinning the music. My project is going to be an hour long, so it seems like kind of a tedious thing to do to have to drag the music clip through the entire project to place it exactly where you want it. I'm sure there must be a better way to do this, but for now I'm just glad I figured out my mistake and how to set the background music volume.
Thanks again for the advice though.

Adjusting music volume

Similar Messages

Maybe you are looking for