Adjusting reply to for Mail contact to an existing address.
Hi all, would very much appreciate any advice on the following.
I have a mailbox forwarding mail to an external service (setup as a contact ) , the service then sends it back, I'd like the reply to address to be the original mailbox.
Example
I email [email protected], this then forwards to [email protected] which sends a response to me, but I want to see this in my outlook inbox, and reply-to as [email protected] (so no one knows there is an external service in the mix)
I cannot set the reply to email of [email protected] to [email protected] as this is already in use - Is there any way I can force this?
Many thanks
Hi,
There is no Reply As permission in Exchange server.
As a workaround, I think we can create a mail user for [email protected] then set
Send As (not reply as) permission to this mail user for mailbox
[email protected]:
1. Create a Mail User:
http://technet.microsoft.com/en-us/library/bb124381(v=exchg.141).aspx
2. set Send As permission:
Add-ADPermission "[email protected]" -User MailUser -Extendedrights "Send As"
Then the mail user can select From field to
[email protected] to send message to others.
Hope it helps.
Best Regards,
Winnie Liang
TechNet Community Support
Similar Messages
-
After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr
Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio -
I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my contacts instead of the addresses stored in my comcast account. How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app. I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity). I wish I could start over!!! thanks.
iPadI could be wrong, but it sounds like Facebook imported to your contacts. I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there. When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies. You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though. Good luck! -
how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MGThis is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment. -
Mail Contact Resolves to Wrong Address
Hello, I have a user that is sending a message to a email address and something is resolving the email address to the wrong address.
First of all, the email address in question is a mail contact on our system and is in the GAB. The SMTP email address of this mail contact is correct in both AD and the GAB.
Secondly, the users' Outlook has all invalid autocomplete entries removed for this email address. The user
does have the recipient save in his Outlook Contacts but does not have an email address listed there, just his name and phone number.
So, what it looks like is happening is that the user is typing in the correct email address in the TO: field, but when he sends the message something
is resolving to this other email address, an address that is not defined anyway.
Any ideas? Exchange 2010/Outlook 2010Hi,
Thanks for your sharing.
It's great to hear the good news.
Best regards,
Amy Wang
TechNet Community Support -
Best Practice for Shared Contacts available as an Address Book in Outlook??
Yep so crazy that Microsoft still refuses (by design) to enable address book option for Shared contacts!!!!!!! So I am asking what do they suggest then for my clients to have a shared contact list that is available as an address book and available
to sync to your phone?
Problem:
I have a client that the boss has a contact list in his outlook that he has synced to his phone that is shared so that everyone else on his team can see the contacts, since it is a shared contact list users are not able to add it to their address book (by
design..nice design)
Solutions I know of:
1.Use public folder for contact list...= Nope public folder contact list will not sync with his iphone/ipad...(yes there are 3rd party tools but I would prefer to not go this route)
2.Sharepoint....I have heard this one but don't know much about it. How does it sync to outlook and phones? Is it seemless? can user add contacts in outlook?
3. ??
Seems like this would be a huge issue that microsoft would have fixed by now. Let me know if anyone has any ideas...
Sbs 2003 I will miss you !!!!Hi,
For more methods of making Shared Contacts available as an Address Book, you can refer to the following articles:
http://social.technet.microsoft.com/Forums/en-US/9d20ffad-d49a-4aa3-8d49-c63b8d4583ee/adding-shared-contacts-to-the-address-book-without-public-folders-in-outlook-2010?forum=outlook
Add shared Contacts folder as Address Book list:
http://www.msoutlook.info/question/614
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it can help you.
Thanks,
Angela
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I am trying to copy my e-mail contacts from my hotmail account to my address book on the Imac. I have copied all contacts to a thumb drive (zip drive) to transfer to the address book, however, I can not find any information on how to copy from thumb drive to address book. Is there a better way to do this?
Addressbook will understand vCard file format.
http://email.about.com/od/outlookexpresssigtips/qt/Create_a_Business_Card_vCard_ in_Windows_Mail_or_OE.htm
Explains how to make all your addresses vCard. -
I have 3 email accounts and on 2 of them there is the "Delete Account" red button at the bottom, but for one of them it is not an option. This particular account that I am trying to remove was installed using the iOS setup tool from GoDaddy.com, which is the host for my work email. These were the instructions I was asked to follow to setup the IMAP account on my iPad:
1. Go to the GoDaddy website (full site) in Safari
2. Type "Apple" in search bar top right.
3. Select "Automatically Setting up Email on Your Apple Mobile Device"
4. Select "Email InfoCenter"
5. Type in my email and password.
6. In email info center, select "Auto Setup fo iOS"
7. In the popup, there is a link in bold letters, select that and copy it, then paste it into your Safari address field at the top and go to that site.
8. Follow instructions and type in your password to validate.
This installs your IMAP account on your iPhone or iPad automatically. So when you go to Mail, it is there as an option.
The problem is that I can't figure out how to delete it!
Any help would be greatly appreciated!
Thanks!I found this link for a similar problem someone had with a Lotus Notes account. I used it to resolve my issue with a different email account (basically followed the same steps, and then looked for the particular account I needed to delete)... hope it helps!
http://aumja24-usa.blogspot.com/2010/10/iphone-removing-lotus-notes-traveler.htm l -
Why is iCloud sync for Mail, Contacts and Calendar not in effect after Apple repair?
... and how to restore it on my iMac? My other 2 devices, MBook and iPhone sync fine.
Thanks a lot,
RaphaelHi treetopguy2028,
I apologize, I'm a bit unclear on exactly what you are referring to when you say that iMessages does not sync. If you are talking about just iMessages proper (iMessage chat messages to other Mac/iOS users, not including SMS/MMS text messages from non-iOS phones), you may want to check that your Apple ID and phone number are correctly linked and configured, as outlined in the following article under the section labeled Use iMessage and FaceTime with multiple devices:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
If you are referring to syncing all messages in iMessage, including SMS/MMS text messages, that would be a function of the new Continuity feature in iOS 8. In that case, this article may be more helpful (Note: Continuity requires iOS 8 on your devices and Yosemite on your Mac):
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Regards,
- Brenden -
Does anyone have an idea for me?
Have a Look at these Links:
Changing Account Information
http://support.apple.com/kb/HT1918
Apple ID FAQ
http://support.apple.com/kb/HE37 -
I have created 3 address books. I want to import new contacts into these address books selectively.
I tried importing a contact that was exported from Outlook as a v card. It worked fine except that it created the new contact as yet another new address book!Importing contacts does create a new address book. Then just drag and drop the contacts into the book of your choice and delete the new book when it is empty.
-
Exchange 2010 - Mail contacts - Set as Reply property
As mail contacts will probably use an external and unknown server to send replies for their mail. I don't understand the purpose of this property for mail contacts ?
Is it only here because one console developer have missed to gray it out or is there a real utility ?
Thank you for that clarification !Hello,
Based on your description, I understand that you create mail-contact with two e-mail address:[email protected] and
[email protected] (set as external address). You want to understand that if the mail-contact reply to these mail from his private mail system, the sender mail will be
[email protected] and not
[email protected]
If so, I consider when the mail-contact reply to these mail from his private mail system, the sender is
[email protected]
Based on my experience, you can set any SMTP address as external address, but the address must be resolved.
If I have any misunderstanding, please free let me know.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support -
Mail merge prints two labels for some contacts. Why?
We use a Mail Merge from our Contacts.app to print mailing labels for Christmas cards. FWIW, our Contacts are kept in sync with a Gmail account. (This hasn't proven faultless, but that's a topic for another time.) For many Contacts, where *only one address is listed*, two address labels are printed. I cannot determine how to avoid this waste of paper. Suggestions?
Hi Daniel, and a warm welcome to the forums!
After all those progress bars, have the other PDF files been saved elsewhere?
Did you check if it might be one big multi-page PDF? -
Delivery failures when sending to mail contacts in O365
We are in the middle of a migration from Domino to Exchange (O365) and have updated the GAL with entries from our local active directory. These entries include email addresses using only a few of the domains that are hosted by our Domino
environment - but not all.
People who have been migrated to Exchange receive delivery failures when replying to an email from someone who is still in Domino.
Example:
User Bob who has been migrated to O365 gets an email from User Ann who is still in Domino. When User Bob does a reply, User Ann's address populates with
User_Ann AT MAINDOMINODOMAIN dot com (Please note - the @ signe was substitued with AT and the .com was substitued with dot com) because I got an error when trying to submit this. Error - Body text cannot contain images or links until we are bable
to verify your account.)
User Ann is defined in the O365 GAL as a mail contact with these email addresses:
User_Ann AT dominodomain1 dot com
User_Ann AT dominodomain2 dot com
User_Ann AT dominodomain3 dot com
User Bob gets a delivery failure.
Why?Hi,
In order to resolve the problem more efficiently, I recommend you ask your question in the Exchange Online (Office 365) Forum. You might get a better answer in the Office 365 forum.
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks for your kindest understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
"Mail, contact, calendar " can't be opened anymore, why?
Hej together,
Some problems with the installation of my e-mail account, as I can't get anymore in installation menue for "Mail, Contact, Calender" to put in my server, etc informations for the installation of the e-mail account...Can someone help a poor "fresh man" ? thanksDo you mean that it crashes or freezes when you try to open it or that it's greyed out and protected ? If it rashes or freezes then have you tried closing the Settings app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with Settings 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If it's greyed out/protected then check that Settins > General > Restrictions > Accounts isn't set to Don't Allow Changes
Maybe you are looking for
-
Purchased songs from iTunes via iPhone 4 but files not found on comp after sync
I purchased an entire album and one additional song from iTunes on my phone while at work on a wireless network. When I got home it started the transfer/purchase updates or whatever. I don't know what happened I don't think there was an interruptio
-
Activate Bates Numbering in Document Processing menu?
I have a customer who needs to insert Bates Numbering into his documents for a coming audit, however when he goes to Advanced > Document Processing , as stated in http://help.adobe.com/en_US/Acrobat/9.0/Professional/WS6 DE1E376-6A82-406c-A711-6C5E520
-
How to: Save many PDF files containing images as jpeg
I have a whole lot of PDF files that only contain images. I need them to be in jpeg format however. To convert them I'd need to open all theses pdf files in Preview and then "save as" jpeg. This does the job wonderfully. But it only does so for one p
-
After downloading a xps file, how do I get Firefox to open it?
I downloaded a document from microsoft's dowload site. When I try to open it, it says what should Firefox do with this file? I click on open with and browse to find the correct xps viewer and choose it. But the window to save or open the document jus
-
Guys I am not able to read my subscription on the ipad. Everytime i press one of the subscription a box appears and when I press oK it keeps showing up. "connect to itune store to use push notification" Thanks for your help