Adjusting Resolution on Blue Eyeball Webcam

I recently bought this webcam/microphone:
http://www.bluemic.com/eyeball/
However the frame rate is extremely slow (1-2 FPS) and I have read reviews on the internet suggesting lowering the framerate from the 1280x1024 default to 640x480. This should increase the framerate to 30 fps.
However I don't know any applications that will do this for me. I've tried maccam, but it doesn't support the eyeball webcam (probably because the eyeball webcam works with OS X without maccam). Skype/iChat do not have settings for resolution either.
Please help, thanks
(Also sorry if this does not belong in iSight, I'm just not sure where to put it).

Ummm,
Interesting.
iChat and Photobooth only sample at 640 X 480 pixels ( about 0.3Mp)
Later Internal iSights and other USB UVC (Vista Certified) compliant cameras are capable of higher when plugged into a USB 2.0 port (Not all Mac Keyboards have USB 2.0 ports)
This will allow you to see the difference
http://macdaddyworld.com/2007/06/28/the-megapixel-test-program-and-more-details/
It will not get iChat or Photo Booth to "see" the enhanced picture.
Generally speaking a slow Frame rate shown during a chat is down to lighting, Processor, Video Card specs and Internet Speed (and possible caps to that in System Preferences > Quicktime > Streaming and iChat).
9:03 PM Monday; August 17, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

For some reason, "HSL" is gone from my develop panel. I used to be able to adjust specific colors (blues, greens etc) for saturation, luminance and so on. But that option is now gone from my develop panel. How do I get it back?

For some reason, "HSL" is gone from my develop panel. I used to be able to adjust specific colors (blues, greens etc) for saturation, luminance and so on. But that option is now gone from my develop panel. How do I get it back?

Right-click the title bar of any of the panels in the righthand column of the Develop module (for example, the Basic panel) and choose "Adjustments" from the panel list that appears.

NI 1772 camera exposure time adjustment resolution

What is the exposure time adjustment resolution capability for the NI 1772 camera? I'm getting only 10ms. Can I get 5 or even 1ms resolution?

Hi Rob,
I am unclear what the problem you are seeing is. Vision Builder AI does not appear to impose any restrictions on the granularity of the exposure time. You can put any value with precision down to sub-microsecond levels (no need to go by units of 10 microseconds).
As for the changes in intensity vs exposure time, keep in mind that image sensors and the hardware that reads them don't necessarilly behave linearly and so you may not see such a linear relationship in the data. While you said that you saw no change in intensity from 70us to 80us, were you looking at a single pixel or an average of the entire sensor? If you average it over the whole sensor I think you'll see the difference (although it might be small and less than a single count).
Eric

How do you adjust resolution on the iPad for viewing You Tube?

How do you adjust resolution on the iPad for viewing You Tube?

fire up youtube app>click video>on the video theres three dots … but vertically>click on it and click the first option its a settings symbol>choose resolution

Moviemaker on windows 7 Aspire 5741. what is the HD resolution in the installed webcam?

Aspire 5741.What resolution is the webcam used in this computer? I need a 720pHD to make a good quality video. I can't find where it tells.

According to my documentation, the resolution quality of the webcam is 1280 x 1024.

Is it poss to adjust resolution on my MacbookPro in-built Cam ?

Hi again,
Is it poss to adjust/improve the resolution on my MacbookPro in-built Cam ?
Thanks.
Chris

christopher-h wrote:
Hi again,
Hello again, Chris!
Is it poss to adjust....
Camera resolution is a function of hardware and cannot be changed.
Camera resolution notwithstanding, the software that you use to operate your iSight controls the resolution for that application, so you may see different image resolutions depending on which apps you use with your iSight. For instance, regardless of whether you use iSight or some other webcam, iChat automatically limits video resolution to a maximum of 640x480. iChat camera resolutions will also automatically be set smaller in low light or with slower internet connections, and, of course, if the hardware resolution of the camera other readers might use is less than 640x480. Some other chat apps set maximum resolution even lower than 640x480.
QuickTime Pro is one Apple app that lets you select camera resolution in its Preferences, but most apps automatically set the image resolution without any control on your part.
... improve the resolution on my MacbookPro in-built Cam ? ...
While not changing camera resolution, adding light can increase image resolution in some apps.
This thread might help improve your iSight's image:
http://discussions.apple.com/message.jspa?messageID=10709632
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

T60 display problem - boot in low resolution pink/blue shade

I have a T60 2623D7U that has a screen resolution of 1400x1050. The problem I am having is that when I start the laptop it starts up with a really low resolution, probably 640x480, and the colour of the screen sometimes has a pink or blue shade. Sometimes it flickers with white horizontal lines. When Windows XP is loaded, I cannot change the screen resolution and even though it shows that it is 1024x768, it is probably still showing at 640x480. Every once in a while it will actually start up with the correct screen resolution and everything works perfectly, but this only happens very rarely. Any suggestions will be greatly appreciated. Thank you.

does this problem occur on external screen?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Auto Adjust Resolution?

I've completed my web site, everything looks as I want it. Is there a method to getting flash to auto adjust to the end users screen resolution? ie: when the site displays on a 800x600 monitor scroll bars appear. I'd like for the site to appear on the page as whole without the scroll bars as it does on my 19 in monitor which is set to 1024x768 resolution.
Thanks!

I've completed my web site, everything looks as I want it. Is there a method to getting flash to auto adjust to the end users screen resolution? ie: when the site displays on a 800x600 monitor scroll bars appear. I'd like for the site to appear on the page as whole without the scroll bars as it does on my 19 in monitor which is set to 1024x768 resolution.
Thanks!

How do i adjust resolution of preview while importing?

How do i adjust the size of the preview of a photo before importing? On my windows machine the preview was of adequate resolution to make a keep/delete decision but on my new imac the preview is thumbnail size and when I zoom the resolution is poor.

The volume buttons on the side of the phone
or
Settings > Sounds > adjust the Ringer & Alerts slider

New Sequence at HD, automatically adjust resolution from previous sequence?

I imported video at full 1080 but edited together a sequence created before i adjusted the easy setup settings for full resolution. So it appears that although i imported the video at full 1080, i edited the clips at a smaller resolution. If i create a new sequence with 1080, is there a way i can just pull all the edits of my previous sequence and have them automatically adjust to 1080? thanks!

Copy and paste from one sequence to the other. Than use the remove attributes function to reset the clips in the new sequence back to their original condition.

Custom resolutions with Blue Ray DVD

Is 1920 by 768 resolution possible for Blue Ray DVD player playback using a ProRes 1920 by 768 source file or a 1920 by 768 H.264 source file? Source file is produced in Motion and will be processed with the Compressor. We can not use 1920 by 1080 or 1920 by 720. Thanks.

We on Motion wrote:
an identical signal into three projectors with 1024 by 768 native resolution
As has been stated, Blu-ray will only support 1920x1080. If you are feeding an identical 1024x768 (not a broadcast/consumer standard for non-computer video) image to three projectors your only option is DVI out of a computer.

How to stop 8.1 Windows tablet adjusting resolution on other computer

Hi, I'm using the tablet to connect to a computer with dual 24 inch screens, at the moment the tablet adjusts the resolution down to one screen and fits it to the tablet. Is it possible to prevent this happening and instead be able to scroll around the desktop?
I tried mstsc span but that didn't work.
Thanks.

Hi,
It seems this is not possible as per your desired requirement.
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

X200 resolution problem (software won't adjust resolution to 1280x800

I'm using Windows 7, had it installed on the notebook for about 6 months, and now every time I turn it on, the monitor will only display 1024x768. The software won't give me an option to crank it up to 1280x800 and it is even at 1024x768 in the BIOS and the windows boot screen.
has anyone had this problem?

Check these out. Don't know if they'll help, since I only use my built-in iMac display:
New cscreen posted:
http://www.pyehouse.com/cscreen/
Change screen resolution in Terminal:
http://www.macosxhints.com/article.php?story=20090413120929454

How to get better resolution on Blu-ray (1080/60i)

I'm experimenting with my new AG-AC160A camcorder and have been shooting youth hockey games in AVCHD mode, 1080/60i, 1/120 shutter, manual gain and white balance set appropriately, and florescent scene file setting due to lighting in rink. I have PP CS5 and am disappointed with the relative lack of HD-crispness when the Blu-ray output is played on my HD LED set. I used the above settings based on recommendations I saw in the forum somewhere. Any suggestions on what I can try differently? Thank you.

To elaborate on Ann's great advice, the Sequence preset you should be using is AVCHD 1080i30 (60i).
A good way to start out with the correct sequence is to import your clips and then drag one onto the "New Item" icon at lower right of Project Bin. This will create a new sequence to match the source material automatically. As Ann mentioned, you have a non-HD preview format, so if you rendered the timeline to green, and checked "Use Previews" on the final export, then your Blu-ray could have "SD quality" footage in it!!
Curious why the 1/120 shutter, hoping to get better action motion?
If you have a current timeline using the incorrect settings, go ahead and add a NEW Sequence with correct settings, open original sequence and "Select All" which is CRTL + A, then CTRL + C to Copy. Then go to the proper AVCHD sequence and Ctrl + V to Paste entire contents. You will now have the edited sequence moved into correct sequence settings. Now use Export and in AME choose "H.264 Blu-ray" and choose the 1080i preset and export, then use results in Encore. The Blu-ray should look excellent when done correctly.
When exporting from AME, do NOT check the box for "Use Previews", as you want to encode direct from original source and skip any intermediate render clips.
Thanks
Jeff Pulera
Safe Harbor Computers

How to adjust resolution for P55t-B5340

Help! I bought this wonderful computer from Costco and have only been using it for a couple of days.
The screen resolution recomendation is 3840 x 2160, it's BEAUTIFUL the big (or small) problem is menu bars like the ones in PhotoShop, and a lot of text in games I play on FB ends up looking like it's about 3 or 4 point type. I would literally need a magnifying glass to read the top menu and left side menu in PhotoShop. Please tell me there is a setting to correct this?
I'm going to go blind trying to read at this rate.
Attachments:
PS Menu.JPG ‏34 KB
FV menu 1.JPG ‏123 KB
FV menu 2.JPG ‏108 KB
FV menu 3.JPG ‏68 KB

Hi @PieterF3rd
Most of our printers have a setting in the Preferences menu to change the date and time, but it appears this one does not. On the front panel of the printer, touch the little wrench in the top tight hand corner to access the settings menu. In the Setup menu select the Preferences menu and check there, if it is not there maybe check the tools menu. From what I can see, the option is not there, but it certainly should be.
If you can't find the option, I would give us a call and express the issue to a phone professional. It is possible that that connecting the printer to a network and enabling the Web Services will automatically update the date and time, but this should be necessary considering not all customers have network access.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Adjusting Resolution on Blue Eyeball Webcam

Similar Messages

Maybe you are looking for