Adjusting screen resolution in FlashPlayer

Playing OMPG and the program allows for setting the screen resolution and will not save the set display resolution. After contacting their support they inform me that the resolution will default to the resolution displayed by FlashPlayer.
How do you change the display settings in FlashPlayer? I do not see anything that will even lead me to FlashPlayer let alone fine=d anything that allows for changing the settings. The choice of resolution will not even match the settings of my computer.
Your assistance is appreciated.

Hi,
When u open se78 transaction then there is a icon import on application tool bar.when u click on this then a pop up screen is displayed .where u have option to change the resolution.

Similar Messages

Mac mini screen resolution not synced with monitor

Hello! I have a Mac mini at home, equipped to an hp w2408h monitor via HDMI cable. Recently, I went to my friends' house with my Mac, plugging it in to their projector and playing Minecraft. However, I had to adjust the screen resolution, and once I got back and set everything up again, the monitor said I need to 'adjust screen resolution'. Is there any way to reset/sync/calibrate the resolution to the monitor, or do I have to go back and readjust the settings? Thanks! :3

Reset the NVRAM

Cant get higher screen resolutions ???

Hi all,
hope you can help...
I installed my new Ge4 Ti4200 last night. All works well but in display properties/settings the highest res. I can get is 1280x1024. This isn't right, i have a 20" LaCie monitor and have used the same one elsewhere at higher resolutions.
I dont think the problem is with the monitor driver as i have tried different monitor drivers and in any case, they all say 1600x1200 etc.. in the monitor.inf. My computer at work will go 2048x1536 and thats using the "default monitor" driver provided by microsoft. so thats not limiting it.
I can only think that when i installed the Geforce software and drivers, somehow it didn't talk to teh monitor properly and therefore limited teh available resolutions. I used to have a voodoo 3 and I know that they are notorrious for leaving old files in your system so maybe somehow old voodoo software has limited the resolutions that teh card will allow in teh display properties ?
any help would be appreciated

I do not know whether it helps, but I use Powerstrip .. very good software. It helps me to access monitor and video card settings easily. After installation and running this program it asks me whether I want Powerstrip to adjust resolutions that is allowed by my video card. After pressing yes I have rebooted PC. After that I could adjust screen resolutions in monitor settings up to 1600*1200 (used for plug and play default monitor). I notice that I use 15' monitor that support max resolution 1024*768 but PowerStrip allows me to change it up to 1600*1200. Of course I do not use resolutions higher than my monitor supports.
If you have no idea to solve your problem try this program. Maybe this one can help to access available resolutions correctly.
Here is the web page for PowerStrip: http://www.entechtaiwan.com

Testing if screen resolution meet requirements

Hi,
By default our computers are set to 1024 X 768. In case a software would need 1280X1024, I would like testing if the actual screen resolution is effectively lower than the one need (1280X1024) and adjust it. If it is higher (like 1920X1080) then making no
adjustment.
What is the best way to compare and adjust screen resolution?
Thanks,
François

Hi François,
If you want to list the screen resolution, please refer to the script below:
Get-WmiObject -Class Win32_DesktopMonitor | Select-Object ScreenWidth,ScreenHeight
In a multi monitor environment you can get the info for all monitors with:
Add-Type -AssemblyName System.Windows.Forms
[System.Windows.Forms.Screen]::AllScreens
Refer to:
Get Screen resolution using WMI/powershell in Windows 7
If you want to change the screen resolution via powershell, please refer to the script in this article, you just need to provide the width and height:
Set-ScreenResolution
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen.

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen. The screen seems to have slipped or moved to the right. Only icons on left of
screen showing. I Need to regain The right side of the scree
I have tried everything I know to sort this out. Thankyou you in advance. Katy Nanna x

Hi,
When you set your monitor to a screen resolution that it won't support, the screen will go black for a few seconds while the monitor reverts back to the original resolution.
Regarding screen resolution, we may follow the below two articles to change it:
Change your screen resolution
Getting the best display on your monitor
Follow the steps below:
1. Open Screen Resolution by clicking the Start button, clicking
Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
2.Click the drop-down list next to Resolution. Check for the resolution marked (recommended). This is your LCD monitor's native resolution—usually the highest resolution your monitor can support.
And if the monitor is LCD monitor, The monitor's manufacturer or reseller should also be able to tell you the native resolution for your LCD monitor. Or we may check the monitor's manual to adjust.
Best regards
Michael Shao
TechNet Community Support

Moan about screen resolution

This is a general moan (hopefully Steve Jobs will read it and come up with a solution)...
Like a number of other posters in this forum, I am finding the resolution of my new iMac 20" a real struggle. I want to display it at its natural resolution of 1680 x 1050 in order to attain a crisp, clean display. However at this resolution the navigators (gumdrops, scroll bars, twisties in Mail, etc) are only about 3mm wide. Now I'm pretty adept with a mouse, but I have to really look in order to click accurately on these navigators. It slows me down no end and is VERY frustrating.
Surely it would be possible to have a System Preference for increasing the size of the general navigators, similar to present features that allow changing icon sizes.
Regards,
Mark.

I am thoroughly confused by your question. It seems like you want to tackle this problem the wrong way around, a web page should be able to render on all resolutions you want to support, you do not start adjusting screen resolutions :s

About screen resolution??

Hey, can anyone tell me how to adjust screen resolution in an application such that web pages fit to every monitor???

I am thoroughly confused by your question. It seems like you want to tackle this problem the wrong way around, a web page should be able to render on all resolutions you want to support, you do not start adjusting screen resolutions :s

Fom with Screen Resolution

Hi
I create form on Screen resolution 800 by 600 and when i try to run it on 1024 by 768 it is not apper completally .
Is there any way to make it run in any Resolution ??

you should check your monitor resolution and your graphic card resolution. But this issue more to the monitor, if you can find your PC model and monitor model please let me know.
mostly graphic card will adjust screen resolution based on monitor resolution, and for windows 8.1 if you able to installed it using this monitor, minimum requirement is 1024x768, so I believed both or your graphic card and monitor should have 1024x768 resolution
support or more
Waiting for your PC model or graphic card model (if you build this PC) and monitor model

Have a bit of a problem. I'm trying to adjust the resolution on a 2013 27" iMac. Brand new, bought on April 6 2013 from Apple. My friend is 84 years old so, I'm trying to help him adjust the screen so he can see the screen. Any direction would be great.

OK. Have a 84 year old that has a hard time seeing the screen. I've been able to adjust Safari's resolution to accomadate him however, I would like to adjust the screen resolution. When I open preference's / displays, it doesn't have an option to adjust. Is there a way? Maybe thourgh terminal? The computer is the new 27" iMac purchased on April 6, 2013 from Apple. Yes, it is the newest iMac without the disk (DVD) drive. It's running Mountian Lion.
Anyone have some direction on how to solve this enigma???
bish

The purchase date isn't the important info here. The actual model of the iMac is and this info is in the model identifier. For example, I have a late-2012 iMac, model identifier is iMac 13,2. I will add that there is no 2013 model available. The most recent at this time is the late-2012 model which I have.
On my display if I select Apple->System Preferences->Displays then press the button "Display" I am presented with a screen which shows Resolution and Scaled as button options. "Best for built-in display" is the default, however, clicking on "Scaled" brings up the various resolutions that can be used with the display:
From this I can select a display with larger items, but keep in mind that while a larger image can be selected (using a smaller width x height value) it will not be as crisp and sharp as the default.

Please help. My Adobe InDesign document keeps crashing when I adjust the screen resolution to High in the View menu. Desperately trying to get my magazines prepared for press today! HELP!

Please help. My Adobe InDesign document keeps crashing when I adjust the screen resolution to High in the View menu. Desperately trying to get my magazines prepared for press today! HELP!
My magazine last month is still working ok - but this month's version has just started crashing for some reason.

We can't know. You have not provided any system info, not told us what version of ID you use nor provided any specifics about the document like images, color profiles, fonts, paragraph styles and what have you...
Mylenium

Auto adjust to screen resolution

I'm pretty new to Flash and am working on a background for my website (not online yet). i was wondering how others have designed applications, such as photo galleries, that automatically adjust to the resolution of the screen on which it's being viewed, as opposed to adding or removing scroll bars to view just a standard, presized bg image, as in HTML.
I assume this is a certain line of ActionScript, but like I said, I'm pretty new and am basically just guessing.
Thanks for your help.

Using 100% width and 100% height in the HTML Publish settings will get you started. You may want to review Flash "Scaling" and "aspect ratio" here:
Here are examples of different scaling parameters available in the Publish settings. You can also add these parameters directly in the html (<param name="scale" value="noscale"). All the examples replace the actual Flash dimensions with 100% for both width and height (width="100%" height="100%"). These examples use the old <object> and <embed> to illustrate the different ways to scale Flash. Once you understand how it works I’d recommend that you use swfobject to place the Flash in your final project.
View the source code for each page to see the full code.
http://www.cidigitalmedia.com/tutorials/scale/exact_fit.html
"exactFit" scales the file to fit exactly within the confines of the screen, irregardless if the movie becomes consequently distorted. The original aspect ratio is not maintained. So round things are not round and squares are not square.
http://www.cidigitalmedia.com/tutorials/scale/noScale.html
"noScale" is the default setting, and causes the movie to be displayed at the originally designed dimensions.
http://www.cidigitalmedia.com/tutorials/scale/no_border.html
"noBorder" causes the movie to be scaled to what ever dimensions are needed to have no border surrounding the movie within the player, which consequently could result in some of the movie being cut off from view. In other words, the movie will maintain the original aspect ratio and will fill the screen completely. But if the movie has to be streched wider to fill both sides of the screen, it will also stretch taller, but then some of the top and the bottom of the movie may be cut off from view.
http://www.cidigitalmedia.com/tutorials/scale/show_all.html
"showAll" scales the movie to the size of the screen (which could cause pixelation if the file contains raster information), the difference between showAll and exactFit is that showAll mantains initial movie size proportions. Because it maintains the original aspect ratio, there can be space to the sides or the top and bottom. But everything always shows and they are not distorted. But notice the photo in the center, it becomes pixilated at larger screen resolutions.
The trickiest part of trying to go full screen is that it’s difficult to make the Flash wider without making it taller also, that is, to maintain the correct proportions or aspect ratio of everything on the stage. These methods are just simple scaling accomplished with html. There are also methods to dynamically scale the stage and it’s elements using Actionscript… but that’s a much more complex undertaking.
Best wishes,
Eye for Video
www.cidigitalmedia.com
Best of luck!
Adninjastrator

ALV size should be adjustable to screen resolution automatically

Hi,
Is there in any way that the size of ALV grid should be adjustable to screen resolution automatically?
Thanks & Regards,
Reena

Hello Reena
If your ALV list is the only element on your dynpro then you should not use a custom container on the dynpro. Instead use the following approach:
*& Report ZUS_SDN_ALVLIST_FULLSCREEN
REPORT zus_sdn_alvlist_fullscreen.
DATA:
gt_kna1           TYPE STANDARD TABLE OF kna1.
DATA:
go_docking        TYPE REF TO cl_gui_docking_container,
go_alvgrid        TYPE REF TO cl_gui_alv_grid.
START-OF-SELECTION.
* Select some data
SELECT * FROM kna1 INTO TABLE gt_kna1.
* Create docking container and dock at left side
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
*      REPID                       =
*      DYNNR                       =
      side                        =
                  cl_gui_docking_container=>dock_at_left
*      EXTENSION                   = 50
*      STYLE                       =
*      LIFETIME                    = lifetime_default
*      CAPTION                     =
*      METRIC                      = 0
      ratio                       = 90 " 90% of screen
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set very high extension -> not overruled by screen resizing
CALL METHOD go_docking->set_extension
    EXPORTING
      extension = 99999
    EXCEPTIONS
      CNTL_ERROR = 1
      others     = 2.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_alvgrid
    EXPORTING
      i_parent          = go_docking
    EXCEPTIONS
      error_cntl_create = 1
      error_cntl_init   = 2
      error_cntl_link   = 3
      error_dp_create   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_alvgrid->set_table_for_first_display
    EXPORTING
*      I_BUFFER_ACTIVE               =
*      I_BYPASSING_BUFFER            =
*      I_CONSISTENCY_CHECK           =
      i_structure_name              = 'KNA1'
*      IS_VARIANT                    =
*      I_SAVE                        =
*      I_DEFAULT                     = 'X'
*      IS_LAYOUT                     =
*      IS_PRINT                      =
*      IT_SPECIAL_GROUPS             =
*      IT_TOOLBAR_EXCLUDING          =
*      IT_HYPERLINK                  =
*      IT_ALV_GRAPHICS               =
*      IT_EXCEPT_QINFO               =
*      IR_SALV_ADAPTER               =
    CHANGING
      it_outtab                     = gt_kna1
*      IT_FIELDCATALOG               =
*      IT_SORT                       =
*      IT_FILTER                     =
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Empty dynpro without any elements
CALL SCREEN '0100'.
* NOTE: dynpro flow logic contains only the two modules shown below
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
* Link to current dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-cprog
      dynnr                       = syst-dynnr
*      CONTAINER                   =
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      lifetime_dynpro_dynpro_link = 3
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
SET SCREEN 0. LEAVE SCREEN.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Regards
Uwe

Screen resolution needs to be 1024x600pixels. can't make adjustment.

this problem is affecting only my yahoo email. everything is 'way too big for the screen. the 'alert' tells me to rt click on windows on desktop, then choose 'properties'. in the display I'm told to click the 'settings' tab in the dialog box. then, set screen resolution to 1024 x 600 pixels or higher. this is totally confusing to me, since i can't even find the 'windows desktop' location for me first step!
very frustrating!!! where do i start?

Another way:
#click the Start button (lower left on the Windows taskbar),
#click Settings,
#click Display, a new window will open,
#click the Settings tab,
#use the slider to adjust the screen resolution.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

HOW TO ADJUST MY FRONT PANEL & ITS OBJECTS ACCORDING TO SCREEN RESOLUTION.

Hai..
I want my fp to be visible in its standard form on all screen resolutions.I've used Maintain window prop for diff screen resolutions but it didnt work.Any Solution to this problem?

Did you also set the "Scale all objects..." setting?
For me mostly there had to be only 1 control to be scaled or changed in proportions, like a graph or listbox, the other controls (buttons, menu rings) should remain in size. This is best done by using splitters. You can lock them, stick them to one side of the window, make them invisible.
greets, Dave
Greets, Dave

Won't Re-Adjust the Screen Resolution

I have a retinal display 13-in Macbook Pro running 10.8.5. After I use an external monitor (27" Thunderbolt Display) and I unplug the thunderbolt display port to take my laptop to meetings, my Macbook Pro still thinks my resolution is 2560x1440. The windows are really big and I need to readjust. The same problem happens when I use dual-monitor. Although the "system preference" does not recognize dual-monitor connection, but OSX still open a new application is a window that I cannot see.
Is there a way force Macbook Pro to rescan for display type and adjust the display accordingly? This is becoming really annoying because I have to reboot for my Macbook Pro to adjust to the default LCD display it has.
Thanks in advance.

Hi b,
Go to System Preferences > Displays and adjust your resolution there.

Adjusting screen resolution in FlashPlayer

Similar Messages

Maybe you are looking for