Adjusting the time duration of a photo in imovie

Hi,
I'm doing an animation on imovie. I need the frame rate to be less then a second. I need about .25 second.
Thanks

You can in fact get down to single frames by using the smallest time scale (1/2 escond per thumbnail) and dragging the selection to the smallest you can.

Similar Messages

Can I adjust the time for each slide?

I'm making videos out my own photos.
I've figured out how to upload the photos, record a commentary, etc. but I need to adjust the time that each slide is shown. This is because the videos are how-to's, and some explanations are longer than others, and in that case the slide needs to stay on longer.
I'm using iMovie 08 and can't upgrade because I'm still on OSX 10.5.8.
Thanks!
Gina

There should be a Duration button at the bottom left of the photo thumbnail in your project. Click this button and you will see a dialog box where you can adjust the duration. Be sure not to check the box that say "apply to all photos".

Can I change the time/duration in a batch way instead of one by one?

I am using Premiere Pro CS3 and I would like to have 7 seconds per photo and not the default of 5 seconds. I know you can do each photo separately, by would love a batch performance. Thanks, Michele

Thank you so much for your reply. I really did not try your approach because I had the question posted on another thread, and was given the following reply and it worked; therefore, just for your information - here it is:
Huntrex
98 posts since
Aug 4, 2009
1. Jul 5, 2010 9:15 PM in response to: photomom17
Re: How do I change the time/duration of all clips from the default 5 seconds?
Go to: Edit -> Preferences -> General. Then customize the "Still Image Default Duration". To get seven seconds per image, enter 210 frames if the project is 29.97fps or 168 frames if it is 24fps.
In the future you can post to this forum, for older versions of Premiere.
It worked great!

How to calculate the time duration on a datetime column?

Hi guys,
I've done some search on this forum and everywhere else but I can't seem to get this right, at the beggining it sounded like something very simple to accomplish, for the instance with Excel but I'm struggling to get it to work with Crystal Reports on Microsoft Visual Studio 2008.
I have a datetime column (SQL Server 2000) that I wanted to calculate the the time duration on the report group footer, unfortunatelly the built-in SUM function cannot be applied and I've tried several formulas that I've found on the internet without any luck. I'm using a datetime column to store only the time because I'm stuck with SQL Server 2000 which doesn't have a time data type.
Would you guys know how to do it by any chance?
Some sample code I've tried: http://www.minisolve.com/TipsAddUpTime.htm
Thanks a lot,
Paul
Edited by: Paul Doe on Dec 12, 2009 5:41 PM
Some sample data:
EMPLOYEE     WORK HOURS
=========     =================
JOHN DOE      1900-01-01 01:00:05
JOHN DOE      1900-01-01 00:20:00
JOHN DOE      1900-01-01 01:30:15
=========     =================
HOURS WORKED: 02:50:20
Edited by: Paul Doe on Dec 12, 2009 5:42 PM
Edited by: Paul Doe on Dec 12, 2009 5:45 PM

Guess what, by further testing the code on the website mentioned above I got it working.
Pus, I needed to change the grouping on the code, so I had to come up with a way to update the formulas based on the groupping field.
Considering "call_date" is the field that you are groupping by on the designer use the following code to update the formula:
CrystalReportObj = new ReportDocument();
CrystalReportObj.Load("C:\\reportfile.rpt");
FieldDefinition FieldDef;
//Get formula
FormulaFieldDefinition FormulaDef1;
FormulaDef1 = CrystalReportObj.DataDefinition.FormulaFields["SubHours"];
//Get formula
FormulaFieldDefinition FormulaDef2;
FormulaDef2 = CrystalReportObj.DataDefinition.FormulaFields["subMinSec"];
//Update the formula to work with the new grouping field,
//this must be called first else will throw an exception
FormulaDef1.Text = FormulaDef1.Text.Replace("call_date", "call_extension");
FormulaDef2.Text = FormulaDef2.Text.Replace("call_date", "call_extension");
//Get the new field we are grouping by
FieldDef = CrystalReportObj.Database.Tables[0].Fields["call_extension"];
//Replace current grouping field with the new one,
//considering there only one group in the report, index 0
CrystalReportObj.DataDefinition.Groups[0].ConditionField = FieldDef;
Have fun.
Edited by: Paul Doe on Dec 12, 2009 8:43 PM
Edited by: Paul Doe on Dec 12, 2009 8:53 PM

HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

Thanks Roger W1,
Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
Thanks,
Jay

How do I adjust the print size of a photo?

I created a collage in PSE 10 and took the photo to Ritz to have printed out in an 18" x 24" poster. When the file was read into their computer for printing, the sizing came up as 18'1/2" x 24". Printing the photo as is will cut 1/2" off of the collage. How do I adjust the print parameters of my photo file in PSE 10 to be exacetly 18" x 24"? Thanks.

Here is my suggestion:
Open a blank, new file (File>new>blank file) size 8.5x11"
Open the collage
Go to Select>all
Go to Edit>copy
Go back to the blank file created in step #1
Go to Edit>paste. The collage will be on its own layer
Access the move tool, and with the corner handles resize the collage. Using the corner handles should preserve the aspect ratio. If you open the rulers, you will have a point of reference as you go along.
Print a draft copy to see if it will be suitable in the frame..
Please report back with your progress.

How to determine the time duration of each job for a particular report

Hi guys,
I am facing a very interesting problem which I want to share with all of you-hoping to get some input from you
enlightened fellas :).
I have vendor and vendor sub-range maintained in one custom table. For each vendor I have got article site combination maintained in another table. The thing is I have to execute this program in background. Now for each vendor I may have only 1 article or multiple articles. So if I schedule the job for 60 min. say then for 1 article the time alloted will be too big and for multiple articles the time alloted may prove to be too small. Another thing from a functional point of view is a vendor which has 1 article today may have more articles added to his name tomorrow (if the customer likes his product the company may buy more from him). So the point is we have to dynamically adjust the time alloted for each job.
I could not find any utility in ABAP which can do this.
Can any of you please help me?
Thanks a lot !
Hasso.
Edited by: Hasso14 on Apr 28, 2011 3:06 PM

Exaactly-only I want to find the best time needed to finish for an article or multiple articles i.e I do not know how many articles will be available for each vendor beforehand before doing a select on the 2 tables. But once I know the number (maybe 1 or more than 1) I want to allot the best time for that article/lot of articles(maybe JOB_OPEN technique ?).Also the number of articles may vary over time so the algorithm should take care of that too.-quite a tricky prob :)-I would request the others to see this reply which I think will clarify their doubts.
Edited by: Hasso14 on Apr 28, 2011 9:03 PM

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1".

HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

When adding a time to an event in the calender in the new ios7 the page scrolls up when trying to adjust the time .How do I finely adjust the time without the page moving upwards?

When entering an event in the calender the page scrolls up when trying to enter and adjust the time,how do you adjust thge time upwards without moving the page?

I see no direct connection.. a printer and the computer setup for internet are not related.
But it sounds like the router in the wife's office is now in the wrong mode..
If you have an existing main router replace the second router for a switch .. that is the easy way.
Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
BUT I am making a huge number of assumptions.
What I need is the full network layout.. a quick picture would help.
I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
I need secondary router.. if that is what it is, IP and settings.
I want the printer type and model. How it is connected.
BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

Measuring the time duration of a Java webdynpro event

Hi everybody,
I would like to know if there are a standart wy of measuring the time duration in seconds of a Java webdynpro event.
We are developing a Java Webdynpro application and we need to improve the performance of our business logic associated to the events which are thrown by our java webdynpro views. We want to do this by a stardart way, and if it possible without coding any line. So, is there any kind of monitorization of this information? or is there a tool to do that?
We would need this information:
- Name of View
- Name of event
- Start time
- End time
Thanks for all.

Hi Antonio Sanz ,
Did you do logging for your application?
If so, you can go and get the information from the logs.(This includes the time in milli seconds)
(Assuming that you have written the logs at starting and ending of each method.)
If not, I think it is not possible with out code change.
If you want to do the code change you can do like this:
method start(){
long startTime = System.currentTimeMillis();
long endTime = System.currentTimeMillis();
long timeTaken = endTime - startTime; // You can print the "timeTaken" on the screen or you can log the information.
Regards,
Jaya.

Since installing Snow Leopard on my iMac, my incoming mail on Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

Since installing Snow Leopard on my iMac, Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

Sylvia,
There is a Office for Mac Product Forums, if now one here is able to answer I'd recommend posting on that forum.

Can't adjust clip duration of still photos in iMovie '11

Anyone having the same problem? I inserted a still photo in one of my projects in iMovie which has a a clip duration of 5s when added. I clicked the cogwheel icon then chose the inspector to adjust the duration. I've managed to changed it to 3s but after I clicked "Done", the clip duration is still under 5s.
I didn't encountered this problem before in iMovie '10 and I've searched over at Google and found out that many iMovie '11 users have the same dilemma.
Any workaround you can suggest? Thanks!

"problems setting duration for still photos and transitions in iMovie '11"
A number of people have experienced the same problem and written about it on discussions. Lots of difference solutions as well. If you search using the title quoted above, you can read the solution I found. It's more complicated than it should be. I've never had to fiddle as much with duration times for transitions and still photos. Nevertheless, the steps I have described work for me. You will also find the steps another reader offered that may work for you if all of your transitions are set for the same durations and all of the still photos are as well.

How do I batch adjust the time on select images?

I took photos with the iPhone and a handheld point and shoot in another time zone. The iPhone automatically adjusted time to the time zone I was in. I forgot to manually adjust the point-and-shoot and so there is now a two hour time difference.
Is there a way to batch correct the time on select images in iPhoto '09?

Sure. Use the Photos -> Adjust Date and Time command
Regards
TD

Most of the time when I export photos by email, it fails

Most of the time, but not all, when exporting photos by email, it takes a long time then fails, how do I fix?

You can stop that behavior by changing two settings within the browser. Go to Tools -> Options and click on the CONTENT button. Make sure that "Block pop-up windows" is checked. Then click on the ADVANCED button on the far right and add a check to "Warn me when websites try to redirect or reload".
That should stop most of them. If not all, then you could install AdBlock Plus add-on, since most of the redirects are ad generated. (Tools -> Add-ons -> Get Add-ons)

Adjusting the time duration of a photo in imovie

Similar Messages

Maybe you are looking for