Adjusting volume and pan curves in real time

Can I adjust my volume curves and pan curves while i'm doing playback?
Example, in pro tools when you play back, with you controller you can change the volum or pan as you want and it "memorizes" you movements. Can garageband do this? or do I have to make them all myself?
Also doesn anyone know if this feature, along with retard and tempo changes, and a different metronome going to be offered in a new version of garageband?

You have to create the curves by hand
As for the future, anyone that knows about coming features would be under NDA, and speculation is against the ToS in this forum B-(>

Similar Messages

  • Using Clip Mixer to adjust volume and pan | Learn Premiere Pro CC - Preview | Adobe TV

    Master a new way to mix audio in Premiere Pro. Infinite Skills author Jeff Sengstack shows how, In addition to mixing tracks, editors can now control individual clips within the mixer interface and create smoother audio fades.
    http://adobe.ly/ZGjaw2

    Master a new way to mix audio in Premiere Pro. Infinite Skills author Jeff Sengstack shows how, In addition to mixing tracks, editors can now control individual clips within the mixer interface and create smoother audio fades.
    http://adobe.ly/ZGjaw2

  • I need to host a Shared PDF on SharePoint. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time.

    I need to host a Shared PDF on SharePoint 2010. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time. Is this possible?

    try here:
    http://www.bbb.org
    File a complaint with them. Verizon will call you to fix the blunder.
    But remember it is always up to the customer to insure what they are getting and what it costs. Don't trust the word of a sales person who makes their living on getting that sale. Lies, deceit or false promises will be and have been used by sales people for thousands of years.
    Good Luck

  • Tip: How to export WITH volume and pan automation

    It is astonishingly simple and I am probably not the first to think of this (...): Do not automate the volume fader and the panpot *on the track*, but insert a Gain plugin and automate its' gain and balance parameters. Those automations will be used when exporting.
    If the instrument has a master volume, you can also automate that, and the same goes when an instrument has a master pan setting. If you automate those, it will be exported.
    regards, Erik.

    lordofthestrings86 wrote:
    You are referring to bouncing down the whole mix to like an .aiff or .wav right?
    Err... no, wrong... I am referring to Exporting (regions, tracks & all tracks) only. As a default, Volume and Pan Automation are not included when Exporting. Send -, Plug In -, Solo - and Mute automation are included. Some people have asked about that in the past, and it can be handy in specific situations. That's all.
    regards, Erik.
    Message was edited by: Eriksimon

  • Can u create cluster and pooled tables in real time

    hi
        can u create cluster and pooled tables in real time.can u send data base tables name of above one.

    Hai Anil
    For creating cluster tables first u have to create table pool ...
    create a table and specify the fields and other tecnical settings and
    then Goto EXTRAS --> Change Table Category and selct the Pooled table and activate it...
    Then Create another table And specify the required fileds and also the settings and then
    Goto EXTRAS --> Change Table Category and selct the Cluaster table and in Delivery and
    Maintainence Properties mention the Pooled table that u created and activate it...
    Regards
    Sreeni

  • QuotesRT and PortfolioRT are not real time stock quotes!

    I just bought QuotesRT and PortfolioRT to check real time stock quotes. But today, after comparing with another real time quotes service and Yahoo Finance real time quotes, I noticed that the stock quotes in QuotesRT and PortfolioRT are not real time at all!
    Are there any other QuotesRT and PortfolioRT users out there? Do you see the same problem? How to contact their technical support team?

    This is the developer website - http://www.litmanxp.com/iPhone/QuotesRT.html

  • What is the best way to match clip and sequence settings for real-time editing?

    I am a long time FCP user and trying to make the After Effects workflow a little smoother by utilizing the Adobe suite.
    One of the most valuable things I miss about FCP is that when I drop a clip in a blank sequence (no matter what the settings of the seq) it will ask if I want to match the settings of the clip. This ensures that no rendering is required to quickly edit the video in real-time.
    Is there a plugin or function in Premiere CS4 that I am missing that will afford me this feature? Currently i am doing everything I can to match the clip settings when creating a sequence, but sadly i'm still having to render the timeline to preview the edit.
    lh

    And in CS4, if there is not a matching Preset, you can choose the Desktop Preset, which will allow you to customize nearly every attribute to match your source footage. The name is a bit of a misnomer, but has been around for a long time. I would have called it the "Custom Preset," but Adobe never called.
    Good luck,
    Hunt
    PS - I just learned something new about CS5 from Curt, because of your question - thanks!

  • HOW CAN I ACQUIRE AND DEPLOY DATA IN REAL TIME WITH DAQ 6024E?

    HI ENGINEER,
    I'M PROGRAMING AN APLICATION WHICH I NEED ACUIRING AND DEPLOYING AN ANALOGOUS SIGNAL IN REAL TIME.
    I HAVE:
    LabVIEW 7.0
    WINDOWS 2000
    DAQ CARD 6024E
    THE SIGNAL I WANT TO ACQUIRE IS 0-10 Vcd FROM A SENSOR, THE PROBLEM I HAVE, IS THAT I AM ACQUIERING THE DATA AND IT SEEM THAT THEY ARE UPDATING EACH SECOND, BUT I HAVE BEEN MOVING THE PARAMETERS SUCH AS TASK TIMING IN THE DAQ ASSISTANT VI AND NOTHING HAPPENS.
    CAN YOU TELL ME WHICH PARAMETERS I HAVE TO MOVE TO AQUIRE AND DEPLOY DATA IN REAL TIME

    Hi barron,
    If you want to see the data update quicker, you can decrease the value in the "Samples to Read" field of your DAQ Assistant. This number controls when data is transferred from the DAQ buffer to the PC. If the sampling frequency remains the same, but this field decreases, it means the buffered data will be returned more quickly.
    Hope this helps.
    Thanks,
    Lesley Y.

  • Activity Dependant and Independant Cost in real time scenarios

    Hi SAP Gurus,
    I know what is activity Dependant and independant costs.  But i would like to know in the realtime scenario what are the costs that would be treated as activity dependant costs and how thay will be handled.
    You answer would be suitably rewarded with points
    Thanks in advnace

    Hi
    In real time based on client practices, the cost/activity plan will be based on activity dependant cost.
    ex: There is Quality control department and it carries out testing of the products.
    now, to get plan/budgeted cost/activity, we can choose the requied cost elements to be planned for the period.
    like:
    the cost elements are
    QC cost elements
    Salararies & Benefits
    Indirect Materials
    Indirect Expeneses
    and fixed expenses
    for above cost elements we do cost/activity dependant plan and calculate the cost per i hour of testing based on parameters.
    Regards
    Laxmiprasad

  • Simulation and complete lack of real time

    Hi,
    I have installed multisim and put down a a very basic 555 timer where  I noticed everything is in slow motion.
    So I hooked up a signal gen to a scope at 50 hz, the scope then draws the signal wave at less than 1hz?
    My processor is almost on idle so I cannot forsee any lack of processing power.
    What completly blows me away is that NO where in the manual is this made obvious, how can simulation of electronics be done at 1/10th of the real speed?
    What even confuses me even more is that if I up the freq of the signal gen, I get  proper high speed results plotted on the scope, so this means it has nothing to do with CPU usuage.
    When I plot 50hz I get this rediculous slow motion less than 1hz on the output of the scope.
    please help explain this?
    cheers
    Gavin

    I usually have the opposite situation. My low frequency signals are usually fairly fast and my high frequency signals simulate extremely slow.
    Multism using the transient simulation (pressing the run button)  does not run in "real time". The time indicator at the very bottom of the screen indicates what I would refer to as circuit time. It is the exact time in the real world that it would take for a circuit to accomplish what it is doing even though it may take 1 minute of our clock time to simulate a 1 second circut event. The reason behind this is that it take time for all the spice commands and circuit mathmatics to be executed, interpreted, and then a solution arrived at and then all the outputs plotted on the instruments. It is this number crunching "on the fly" that makes the simulator run out of sync with real time.
    One thing that can be used to speed things up is to look under SIMULATE>INTERACTIVE SIMULATOR SETTINGS then go down to where it says Set Maimum Timesteps (TMAX). Click the circle next to Maimum Time Step (TMAX) and in the the little box to the right change it from 1e-005 to 1e003.
    With the obve setting you can approach real time with simple circuits, but with more complex circuits or high frequency circuits this could cause problems as the simulator doesn't have time to converge to a solution and you will get "time step too small" errors or the output will not look as you expected it to look.. This setting is basically the resolution setting of the simulator. The lower this setting is the less accuate the results but the simulation speed is faster. The higher this setting is the more accuare the results but the slower the simulation speed.
    I hope I have helped somewhat and that this helps explain what you are seeing. 
    Message Edited by lacy on 10-28-2007 08:30 AM
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • Volume and pan

    So i am working on a widget and I cant seem to get the volume
    and balance sliders to work right. Can someone take a look at my
    code and see if you know what going wrong. The web address of the
    widget is www.buttonbeats.com/sequence.html . The only slider that
    works is the first one for now. Till i figure out why this one wont
    work. and the action script is below.

    ok so things are now working except that the volume slider
    works upside down. Could you take a look and let me know how I can
    flip the volume slider upside down. the swf is located
    www.buttonbeats.com/sequence.swf
    var myvolumebounds:Rectangle=new Rectangle(volumegroove_mc.x,
    volumegroove_mc.y, 1, volumegroove_mc.height);
    var mybalancebounds:Rectangle=new
    Rectangle(balancegroove_mc.x, balancegroove_mc.y,
    balancegroove_mc.width, 1);
    volume_mc.addEventListener(MouseEvent.MOUSE_DOWN,
    startdragvolume);
    //volume_mc.addEventListener(MouseEvent.MOUSE_OUT, stopdrag);
    volume_mc.addEventListener(MouseEvent.MOUSE_UP, stopdrag);
    balance_mc.addEventListener(MouseEvent.MOUSE_DOWN,
    startdragbalance);
    //balance_mc.addEventListener(MouseEvent.MOUSE_OUT,
    stopdrag);
    balance_mc.addEventListener(MouseEvent.MOUSE_UP, stopdrag);
    function startdragvolume(myevent:MouseEvent):void{
    myevent.target.startDrag(false, myvolumebounds);
    function startdragbalance(myevent:MouseEvent):void{
    myevent.target.startDrag(false, mybalancebounds);
    function stopdrag(myevent:MouseEvent):void{
    myevent.target.stopDrag();
    var myRequest:URLRequest=new URLRequest ("inst.mp3");
    var mySound:Sound = new Sound();
    var myChannel:SoundChannel;
    var newSetting:SoundTransform = new SoundTransform();
    mySound.load(myRequest);
    myChannel=mySound.play();
    stage.addEventListener(Event.ENTER_FRAME, everyframe);
    function everyframe(myevent:Event):void{
    var newvolume:Number = (volume_mc.y-volumegroove_mc.y)/100;
    var newbalance:Number =
    ((balance_mc.x-balancegroove_mc.x)/27)-1;
    trace (newbalance);
    newSetting.volume=newvolume;
    newSetting.pan=newbalance;
    myChannel.soundTransform=newSetting;
    stage.addEventListener(Event.ENTER_FRAME, everyframe2);
    function everyframe2(event:Event):void {
    leftbar.scaleY=(myChannel.leftPeak);
    rightbar.scaleY=(myChannel.rightPeak);

  • 3D geometries and shapes change in real time

    Hello everyone,
    I'd like to realize a D object in Scene Display, now I can control a geometry in real time, I mean change the length of a box for example.
    But further I want to be able to change it to a other shape,in real time too,and also its geometries can be changed in real time,for example from cylinder to a Box or a cone.
    Can anybody help me, very appreciate for you suggestions!!
    Attachments:
    cyclinder.vi ‏16 KB

    Creating one of each and inserting the active image and removing the previous will not suffice?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Delete hyper draws (volume and Pan)

    How can hyper draws (volume aund pan) be deleted from audio files in Logic Pro?

    Lots of CC's in this topic...

  • MacBook Pro has no sound, no way to adjust volume, and will not play music.

    My MacBook Pro seems to have lost all of its audio functions.  I cannot adjust my volume using the keyboard controls, or through the button at the top of my desktop screen, or even through System Preferences.  I get the normal volume adjust screen, but it is faded, and there is a symbol over it indicating that I cannot adjust anything.  When I go into the Sounds menu from System Preferences, there is nothing for me to select under Input or under Output.  My computer makes no noise, whether I'm using iTunes, watching a video, or anything.  I cannot play music.  My songs simply won't start, and when I skip to any given part of a song, the music still refuses to play.  I am not getting the red light from my headphone port.  I tried to remove any dust that may have collected in the headphone port, and I've even tried to reset my NVRAM and PRAM.  I also updated to OS X Mavericks 10.9.2.  Nothing helped.  I remember that my MacBook was working perfectly fine all of yesterday, but at one point later in the evening, I tried to plug in my headphones to play music, but nothing would play.  I opened Spotify, and it gave me a message that my speakers were broken (I was using the internal speakers).  That's when I first noticed the issue.  Is there anything else I can try before going to the Apple Store and having them try to fix it? Thank you very much, I appreciate any help.   

    The last gasp is an OSX reinstall.  If that fails, then the genius bar is the best option.
    Ciao.

  • Volume in earpiece not working. Volume buttons work as can adjust volume and is set yo max. I haven't left the protective screen cover on.

    Earpiece volume has gone very low when using iPhone. Have to switch to external speaker to hear caller, everything else is working ok. Ear phones are working fine and they are not staying registered when they are removed. Also I haven't suddenly gone deaf. Any ideas.

    Snap. I'm having to restrain myself from smashing it to smithereens, such is my lack of control and anger.
    The reason - this is my THIRD replacement iPod 4G 40gb, delivered on 21/5 (I have been without it for a month - unnaceptable, even coming from China, and with laser engraving). Right from kick-off it is doing this with the click wheel. I have just opened the box as my wife went into labour on the day of delivery, and this has been the first moment I've had since the arrival of our boy.
    Apart from the click wheel nonsense, the hard drive sounds like a hair-dryer, and the build quality is absolutely disgusting - the white facia is mismatched significantly from the back and you could shave with it in extremis. The click wheel has a 'shadow' round the left curve and has been so badly fitted all the buttons below 'rattle'
    In the seven months since initial purchase, I've been without it for two. I'm going straight on the phone to Apple in the morning to demand a refund and compensation.
    I'm typing this on my Powerbook - the third incarnation. Is there no quality control in Apple's Chinese operation?

Maybe you are looking for