Adjustment brush after updating to 5.7 totally deactivated

Since updating to 5.7 the adjustment brush does not function -- no sliders have any effect, and the show overlay shows nothing.

Yes, I had flow set to the minimum. I changed that -- and everything works.
Thank you, Rikk!

Similar Messages

Adjustment brush after HSL operation

Hi,
I just desaturated all colours but one with HSL (all except red in my case). Now I want to desaturate remaining PARTS of the image with the adjustment brush (saturation slider to the left). Turns out it does not work this way.
What am I doing wrong?

So you want to desaturate parts of the remaining red colour with the brush?
I just tried it and it worked (LR 3.2).

CS4 raw editing, global adjustments versus useing "Adjustment Brush"

I had made a post earlier about CS4's raw editor hanging when working on .cr2 files ( canon). It seems that the raw editor works fine when makeing global adjustments, but when using the adjustment brush to make selective adjustments the program hangs for extended times. A global brightness adjustment will go thru in a couple of seconds at most, where as a photo with a few selective adjustments made to it will hang for as long as 5 minutes or more. Moving the image around is fluid when dealing with a image that does not have selective adjustments, and hangs when dealing with an image that has selective adjustments. The program seems set up to make selective adjustments ( it does have a selective adjustment brush after all ) but useing that option seems to cause such massive problems that it is un usable. The raw editor seems to use 50 to 100% of the proccesor during the hang time, and there is no disk activity which leads me to believe that there is not a problem with not haveing enough ram.
I would appreciate any help that can be given with this problem

First off let me say thank you for your responce. But if what I have been doing is
selective tone adjustments, not HDR
That doesn't change the fact it would be a feature that can enhance the image process none the less.
But not all the images I process are single shot images... I actually take time to scout a spot. Then I take about 3-4 shots at different exposures. Go into Camera Raw and and make different versions(snapshots) of those images. Then create a document for each of those (snapshots) Then I open in a HDR program... NOW Photoshop HDR... and process them. The effect is different than the normal way of converting images into HDR... I think even more precise, or at least in my opinion. So creating a feature like this will give the user the ability to streamline the workflow.
So much of what you described doesn't belong in the HDR plugin, but is already available as tools in ACR or Photoshop itself.
But what about the HDR adjustment brush tool I suggested? That really sounds like a good possibility that people would like to utilize when creating HDR images.

My Local Adjustment Brushes no longer recognized after LR 4.3 update

After running 4.3 update, my local adjsutment brushes are no longer recognized and appearing in the Lightroom GUI. They are all still located under 'Lightroom' folder --> 'Local Adjustment Brushes' folder (nothing has changed and I see all files are still there in Finder), but no matter how many times I've restarted LR, they are not showing up in the GUI.
Please advise ASAP!! Thank you

It's not clear from your initial problem description, but are you talking about local adjustment presets that you have created yourself (i.e. user presets), or are you talking about the standard presets supplied by Lightroom (Burn, Dodge, Soften Skin, etc)?
If it's the latter, go to Preferences>Presets Tab and click on "Restore Local Adjustment Presets".

Since updating to v.3.4.5 adjustment brushes no longer work? Please help??

Hi Guys,
I have just updated to Aperture 3.4.5.
Annoyingly the adjustment brushes and sliders such as "straighten" no longer work. They are added to my adjustments panel when I select them from the drop-down menu, but are accompanied by the sound of the dreaded apple beep (suggesting something is wrong) and do not change the cursor into the appropriate tool, thus preventing me from carrying out these particular adjustments.
If someone has any solutions for this problem, it would be greatly appreciated!
Thanks.

Test again in a different user account with a small test library. Does it still not work for a different user after reinstalling?
And test in your regular account with a small test library.
is it possibly something to do with an incombatiability between the new update and a plug-in?
Which plug-ins are you using? Are they all compatible with Aperture 3.4 and Lion?
Aperture 3.4 and later: Some third-party plug-ins are no longer compatible

Has anyone experienced a problem with the adjustment brush since last update (for Mac) last week?

Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape). When I release my mouse, the adjustment I've made affects my entire image. I had no issues with adjustment brush prior to the update. I've been on the phone with Adobe support (no help). Have uninstalled/reinstalled Lightroom several times (no help). Adobe directed me to Apple (recommend use of Time Machine to date before Lightroom update came through). To ensure it's an isolated bug, I checked my MacBook Pro. Worked fine without update; I let update come through and find the adjustment brush "bug" is intermittent. When it occurs, however, I always see the larger "box" area, and the adjustment brush ultimately affects my entire image.
Anyone else experiencing this? Adobe support insists it's a Mac issue. Thanks!

Hi,
Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape).
Same problem (rectangular areas) + others under Windows. The adjustment brush and the clone / heal tool have been totally broken in LR 3.2. You're not alone. See this thread. I have filed a bug report. No answer until now.

Wacom Tablet Pen Pressure stops working in Photoshop after using Lightroom Local Adjustment Brush

Hi all,
I am experiencing a problem with my Intuos Pro Medium (driver 6.3.9w3 on Windows 8.1)
I am using Lighroom 5.6 and Photoshop CC 2014.
I an get the pen pressure to work in Photoshop without any problem. However, if I go into Lightroom and use the Local Adjustment Brush and then transfer the photo into Photoshop (Right Click Edit In => Edit in Adobe Photoshop 2014 CC) then the pen pressure stops working in Photoshop.
Really frustrating... The only workaround is to close both Photoshop and Lightroom, then reopen Photoshop, then usually the Pen pressure feature starts working again.
Has anyone experienced this before or has any idea how to fix this?
Thanks,
Guillaume

Your tablet driver isn't reporting pressure correctly.
The knockoff tablet drivers usually need to be revised for each new version of Photoshop (and we have no idea why).
Contact your tablet maker to see if they have updated drivers to fix their bugs.

HT4623 After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off.

After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off. has anyone else had this problem with it being "stuck"?

Basics from the user guide have always been, and still remain, restart, reset, restore from backup, restore as new.

After updating to Yosemite brush stops / lags

After updating to Yosemite whenever I am using brush or the eraser tool it stops or lags (I am not sure what to call it).
What happens is I can't hit any other shortcuts keys like "[ ]" for increasing the brush size and even changing tools like pressing "V" but if I click the icon it will be picked.
I checked the history panel it also stops there.
I am using
Wacom Bamboo CTH-670
Wireless keyboard
Wireless Mouse
iMac (21.5-inch, Mid2010)
I also did these things
- Reinstalled photoshop and driver of Wacom
- Used the brush in Lightroom (it works perfectly there but not in photoshop)
- Using the clone stamp tool like a brush it works perfectly.
What should I do now?

I couldn't see the clear Caches but it is okay now. I got the solution from another post and the solution was
"Are you running CS6? if so, go to Menus, shortcuts, Lasso tool, or Photoshop stop working when using a Wacom tablet | Mac OS
and install the white window workaround plug-in. Let us know if this clears up the issue"
Still I am thankful to everyone who came here.
Thank you!

My screen got totally white after updating to Yosemite

Uploaded the Yosemite to my IMac.
When installing the new update (running OS10.6.8 before) the computer restarted during installation.of program.
After that the screen is just totally white. What happened and what shall I do?

Thank you.
I’m writing from a PC at the moment.
Thanks for the answer. I can’t save anything now, the computer is ‘dead’ it is a shame on all I have on the computer.
And all this problems because of my banc who wanted my to update in order to put in a special identification program.
Who shall I blame?
I have to rebote my computer.
I am crying… ☹
Harriet
Från: Apple Support Communities Updates [email protected]
Skickat: den 17 februari 2015 22:44
Till: Aqua Produkter
Ämne: - My screen got totally white after updating to Yosemite
http://www.apple.com/support/assets/images/external/emails/logo.gif
You received a reply
Kappy<https://discussions.apple.com/people/Kappy?ac_cid=op123456> has replied to your question. You can view the full discussion<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871> in Apple Support Communities.
My screen got totally white after updating to Yosemite<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871>
Can you reboot the computer to Snow Leopard? If so, then re-run the Yosemite installer application. It should be in your Applications folder.
If you can't, then you need to erase the drive and reinstall Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1<http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FDL1399&answerid=16777216&src=support_site.downloads.search>.
Correct Answer <https://discussions.apple.com/email/thread/6836494/correct/27684871> Helpful Answer <https://discussions.apple.com/email/thread/6836494/helpful/27684871>
Use the buttons above to tell Kappy and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Kappy, go to the discussion<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871> in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile<https://discussions.apple.com/user-preferences!input.jspa>.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved<http://www.apple.com/legal/> | Privacy Policy<http://www.apple.com/legal/privacy/> | Terms of Use<https://discussions.apple.com/docs/DOC-5952> | Apple Support<http://www.apple.com/support/>

Photoshop brush lags and stops after updating to Yosemite

After updating to Yosemite whenever I am using brush or the eraser tool it stops or lags (I am not sure what to call it).
What happens is I can't hit any other shortcuts keys like "[ ]" for increasing the brush size and even changing tools like pressing "V" but if I click the icon it will be picked.
I checked the history panel it also stops there.
I am using
Wacom Bamboo CTH-670
Wireless keyboard
Wireless Mouse
iMac (21.5-inch, Mid2010)
I also did these things
- Reinstalled photoshop and driver of Wacom
- If I use mouse it works okay
- Because mouse is okay I thought maybe it is my wacom but used the brush in Lightroom it works perfectly there
- Using the clone stamp tool like a brush it works perfectly.
What should I do now?

Are you running CS6? if so, go to Menus, shortcuts, Lasso tool, or Photoshop stop working when using a Wacom tablet | Mac OS
and install the white window workaround plug-in. Let us know if this clears up the issue

Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. W

Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. Would appreciate suggestions to remedy this. Rhonda

I think it means "the sliders are all 0 so painting adjustments with this brush won't change anything." In other words, move one of the sliders to a non-zero position, for example Exposure from 0 to 1.0, and then see what happens. You can edit the brush and change it to do something other than Exposure +1.

Weird blocks on image after using adjustment brush in ACR

A group of people took an online webinar yesterday. The instructor is a heavy Adjustment Brush user, in LightRoom. After taking the class, many of the students in the group are reporting the appearance of weird blocks on images, after using the Adjustment Brush - both in LR and in ACR. It is also happening to me. I am a heavy Photoshop and ACR user - never before have I seen this. The only thing I'm doing differently is using the Adjustment Brush (because of the webinar class, as it was part of the instructor's core teachings). What could be causing this?

There was an adjustment brush bug in older versions of ACR. I first reported it here, and Eric Chan acknowledged the problem. It went away in future releases. Sorry, I can't remember what version numbers were involved.
http://forums.adobe.com/thread/928672
(see youtube demo)

Lightroom 4.2 adjustment brushes aren't working (and weren't before update either)

When I go to use my adjustment brushes, I would select the one I wanted to use and then go try to use it. As soon as I first let go of my mouse, the brush would change to custom. Since updating to 4.2, that has stopped switching, but my brushes still don't work. I have tried multiple brushes and it's all of them, not just one particular one. I have tried restoring my presets, that didn't work. I have tried deleting all of the presets from the folder, restarting Lightroom and re-importing them, that didn't work. I updated Lightroom, that didn't work. I have restarted my computer and that didn't work. The thing is, is that they HAVE worked before. I was switching between some catalogs and once I was done with that, they stopped working. So I'm not sure if I did something while switching between catalogs or not. I use these brushes all the time and they are a significant part of my workflow!!! Any ideas?

Hi Maggie, do you mean the preset name changes to custom? Does that sound like this bug: http://feedback.photoshop.com/photoshop_family/topics/lr4_1_self_created_preset_brush_prob lem ?
When you say they don't work, have you checked the Flow slider value?
And if you go to preferences, is 'store presets with catalog' checked? That could explain it working in one catalog but not others.

Satellite L855 - 13G - can not adjust the brightness after update to Win8

Hello
After update to windows 8 , and installed the latest AMD driver on Toshiba site, I can not adjust the screen brightness using the Fn F2 or F3.
In this thread : http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69752&tstart=45
He say he solved her problem but how ?
I have installed the Value Added Package, but no change
Thanks

Hi
Download the latest driver from Toshiba EU driver page.
Now uninstall the preinstalled driver in device manager (in device manager choose graphic card AMD/ATI and then choose uninstall driver).
After new reboot I recommend installing the driver from Toshiba page.

Adjustment brush after updating to 5.7 totally deactivated

Similar Messages

Maybe you are looking for