Adjustment brush bugged? Image areas not brushed over change nevertheless

Problem:
I used the adjustment brush to brighten up an area in an image (+0.2 exposure). Doing so, a nearby but not connected area and not touched by the brush brightened up as well, going from almost blown out to blown out as shown by the red warning overlay.
System:
Pentium i5 machine, Windows 7 home premium 64 bit, 8 GB RAM
Lightroom 3.3 64 bit
Here are some illustrations:
before applying the brush (note the blue are near the upper edge not yet blown out)
I am applying the brush here (note area marked in red, not touching the blue almost blown out part near the top edge):
And this is what happens to the blue area when applying the brush:
The funny thing is, when I hover the cursor over the brush pin (as in the second picture above), the blue area to the top left is NOT marked blown out (as can be seen in the second picture).
Something strange is going on here. Either the red 'blown out' overlay is not functioning correctly in this situation, or the adjustment brush is bugged. It should obviously not have any effect on areas that have not been brushed over.
Any thoughts?
Christian

CASpyr wrote:
Thanks Lee Jay for the quick reply. I did search before posting but apparently have not used the right terms.
It seems this is known for quite a while. Has Adobe made any statement on a workaround or that this is being fixed?
I understand this is something occurring in unusual circumstances only but still, it's a bug....
I think the problem is that they cannot reproduce the issue, hence no fix yet.

Similar Messages

HT2506 I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue.

Raw images are not opening in photoshop nor tiffs with light room adjustment

raw images are not opening in photoshopcs5 nor tiffs with light room adjustment from lightroom3. need help have client dead line for today and monday..please help. thank you nancy

I am too tired to go through all this again with an other forum, I also do not have the time, I must hand in my images monday morning...I will wait till you get back to me...it 8pm brussels time..I will continue working in capture one in the mean time... and hope you can find the answer...thank you for you help. sincerley
nancy

Why aren't my FW (PNG) image are not showing up

Hey guys.
This is really bugging the hell out of me. I feel like I
can't move on until i can figure out why my PNG images are not
showing up in preview (F12). They did yesterday before I deleted
some pages and renamed old pages I no longer needed.
All my images that was done in FW are in my root folder in
the file panel. i didn't move any of those. When I double click on
the image to bring up the "select image source" in the URL it
starts off with two periods then a slash and then the name of where
it's located as well as the name of the image. The "relative to":
is site root. i didn't change any of these setting before I deleted
and renamed pages in my file panel.
Oh, and my Ap Divs show up in light gray boxes.
Please help!
CS3 Mac

I'm confused by the subject line! Is this like 'all of your
base are belong
to us?' 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Dooza" <[email protected]> wrote in message
news:gki5he$3pu$[email protected]..
> Why_ATL wrote:
>> Hey Alan
>> is the filename exactly what it should be? YES
>> Are these .png files for web use, or are they PNG
fireworks original
>> files
>> which are very large in file size because they
contain all the info on
>> layers and such? They are .png files for the web. I
can't figure out why
>> my Div is showing up in preview instead of my images
There just Div's
>> with the little blue question mark.
>>
>> This is getting harder and harder. I'm trying to
laugh so i don't get a
>> head ache over this. This is weird.
>
> Without a link we can only make wild stabs in the dark.
>
> Dooza

Button Images are not shown

Dear All,
In one of our test instance, some button images are not shown, whereas some are.
They are shown as grey button.
I searched metalink, according to them patch 1238573 should be installed, which is already installed.
What could be the reason?
Also, is there any way to find out which images are missing?
Regards,
Ashish Shah

Hi
I've seen this happen a few times. The solution is usually to synchronise something called 'the X-Server' with the middle tier. I'm afraid that the technology is over my head, but it does work!
The X-Server controls how images are rendered in the e-Business Suite. Your DBA should know what this is and it's a simple matter of stopping and restrating the X-server.
That should do the trick!
Regards
Tim

Dimmed images are not dimmed after saved as PDF.. please help!

Hi,
After dimming multiple images in AI, they are dimmed in the program but once i preview the pdf I saved of the .ai file, the images are not dimmed. What am i missing?
Thanks!

Dim is an Illustrator layer options attribute, that does not tranfer over to the .pdf. You will have to either group all in the layer and set transparency to you dim percentage, or draw a white rectangle and fill that with a percentage of white.

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

Create a smart collection with criteria "collection" and "does not contain"; and also with criterion Folder contains (or folder contains all)
That works if you are thinking about a specific named collection.
If you are interested in finding photos that are not in ANY collection, the usual trick is "collection" "does not contain" "a e i o u y"

Images are not showing up

My presentation is like a slideshow and the images are all
loaded in my library and draged and drop onto the stage, which they
all can be viewed just fine. All are jpeg and relatively the same
file size, nothing really differant about them, but when I preview
or publish the presentation, 3-4 images are not visible. A couple
of them just don't show up but one image disappears when I go to
another frame and come back to it. Example: I view image01, its
veiwed fine, I go to image02 and its fine, I go to image03 its
fine, I go back to image02 and it doesn't show up!
I don't understand why its happening since there is no
actionscript on the image or anything else done to it that I can
see. Its just an image. Anybody else had this problem and know what
I shoud do?

Hello? Can anybody help me?

Images are not showing up on my macbook pro

I just noticed that images are not rendering when I'm trying to upload them via my Macbook Pro.
I also can't see some videos or images on websites. I do have Flash player installed.

eringlass wrote:
I do have Flash player installed.
Is it the latest version?
Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue.

Sometimes, some images are not shown...

Hi!
Out applet shows (or loads?) all images correctly, but sometimes, one or more images are not shown (or loaded?). What can it be?

I am having a similar problem so maybe someone can help me too.
I find that my images load correctly most of the time, but once in a while (say 1 in 4 attempts), some of them dont load. The reliability of this is much better now that I have moved the images out of the jar, but its still not right
I also find that sometimes the classes do not load. I get classdef.not.found for a file that really should be there. I can see that the jar containing it has been downloaded to the temp dir. I have been clearing my cache out manually for now between every attempt.
I am not sure what code to show. I dont think its necessarily a problem with images since classes dont always load either, but here is the code for loading images anyway.
        MediaTracker tracker = new MediaTracker(applet);
        for (int i = 0; i < img.length; i++) {
          img[i] = applet.getImage(urlCodeBase, imagePath + images);
tracker.addImage(img[i], i);
tracker.waitForID(i);
if (tracker.isErrorAny()) {
System.err.println("Error loading image " + images[i]);
My web content is being delivered by 3rd party hardware which might be rather slow - its hard to tell. My entire web content is approx 200KB. Results are the same using IE or Mozilla.
Any ideas would be a great help!

Images are not shown after deploying in apps

After deploying my application in apps i have put all my images in media folder even then the images are not displaying, can any tell me what is the reason for this, but when i have deployed before it was working fine...

when the page is displayed without the image, right click on the image place holder and click on properties. Under General tab,
address will show you the place/url page is looking for the image. Make sure you have put the image on that path and the name of image mathes the case as well.
--Tanveer

In fire fox and google chrome CSS and images are not loading

I am facing problem with jrun, In IE-8 application is working fine, but in FireFox and Google chrome CSS and Images are not loading.
in fire fox and google chrome requests are Aborted.
thanks
Ashok Gadiparthi.

Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com

Adjustment brush bugged? Image areas not brushed over change nevertheless

Similar Messages

Maybe you are looking for