Adjustment Brush Circular Point or Pin Has Disappeared

Hi,
The Circular Point or Pin on the Adjustment Paint Brush Has Disappeared. I re installed Lightroom 2 software hoping it would appear after the re-install. It did not re-appear.
Any suggestions on how to re-install it?
Thank You,
Hersul

Lee beat me to it again
This happens a lot - both the pins disappearing and Lee Jay beating me to the answer. :o)
Dave

Similar Messages

  • Accept/Reject changes and Adjustment Brush Buttons have disappeared

    The buttons that appear at the bottom of the Development Panel when using the Adjustment Brush, Crop Tool, GND Filter, etc., have STOPPED appearing on my version.  I can accept the changes by clicking on the Brush, ND filter, etc, but have no way to reject the changes other than going back in the history.  Also, the button that shows the Adjustment Brush as a "painted" area has disappeared with the rest, and so I can never specifically see the area I'm attempting to work on.  I thought perhaps I did something that hid or disabled these buttons, but I cannot find any such action.  Any ideas on this?  Thanks for any help. 

    While you're in the Adjustment Brush, hit the T key.
    Hal

  • Loosing Adjustment Brush previews in ACR 7.2

    When I move my cursor over a pin (call it pin #1) the area controlled by  pin #1 looses its preview - appears to revert back to the unedited state. (Same if I actually click on that pin, as if I mean to add to that adjustment brush edit.) If I then move the cursor over another pin, any pin,  the preview view returns to the area controlled by pin #1. 
    This happens with a RAW image that has just 2 adjustment pins as well as as one that has a dozen adjustment brush pins . Clicking the Preview off and on does not cause the preview to return to the pin that has lost its preview. Doesn't matter if the RAW file is using process 2012 or 2010. Happens to NEF files from a D300 as well as D800E. Doesn't matter if Enable Lens Profile Correction is checked. I have turned off and then back on the Use Graphics Processor in Prefs, and changed Image tile size (Does that affect ACR?)
    HP z220 worksation
    Windows 7 x64
    i7 3770 3.4
    32GB RAM
    Video Card: AMD FirePro V4900
    Video Card Memory: 1024 MB
    Driver Version: 8.911.3.1000
    Image tile size: 1024K
    Image cache levels: 6
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    Photoshop Version 13.0.1.1
    monitor: NEC PA301W at 2560 x 1600 x 4294967296 colors

    Saw your note in the other thread.
    I needed to test this; I don't use the Adjustment Brush much, so I wouldn't have noticed it.
    When I HAVE used the Adjustment Brush in the past - though quite possibly never in 7.2 as I reverted back to 7.0 for other reasons - as I would hover over a pin it would put a white "fog" over the image to show where the adjustments are effective.
    I've just done a test where I created two obvious adjustments with the Adjustment Brush in the shape of A B on the top of a dark image.  A and B each use different pins.  I then chose [Done] to save the adjustments.
    With Camera Raw 7.0, when I open that image back up I see the adjustments, and when I select the Adjustment Brush and hover over each of the pins I see following:
    Open Image:
    Select Adjustment Brush:
    Hover over left pin:
    Hover over right pin:
    Move cursor off right pin:
    With Camera Raw 7.2, I see this:
    Open Image:
    Select Adjustment Brush:
    Hover over left pin:
    Hover over right pin:
    Move cursor off right pin:
    Yep, looks like a bug all right.
    -Noel

  • Lightroom 2.4 Adjustment Brush issue

    I currently use Windows XP home and Lightroom 2.4 updated within the last two weeks. When I use the Adjustment Brush it creates the ruby lith mask over the image and dose not show any interactive live adjustments as I've seen on many of the on-line tutorials. Only after I've clicked the close button or the Adjustment Brush are the changes made. I then have to reselect the Adjustment Brush click the appropriate pin and get the same ruby lith mask and repeat the process time and again to achive the results I want.  I have the original 2.2 version on my laptop an it works as per the tutorials. Any pointers as to where I am going wrong would be welcome.

    On Mac ctrl +h hide\show pins, o - shows mask, shift + o changes color of the mask

  • ACR 8.4 adjustment brush sluggish in Br & PS

    The "adjustment brush" in ACR 8.4 has a tremendous lag in PS and Br, is OK in LR.  Everything was fine for me in ACR 8.3.  MacPro 3.33 GHz 6 core Xeon, 32 GB ram, Rad ATI HD 5870 graphic card, (No difference in basic or advanced Processor setting). OS 10.8.5.  All the other ACR sliders work fine.  This condition was also present in the 8.4 beta version,  and was fine when i switched back to 8.3.  I believe this is a core issue with 8.4 because it is also present in my other computer.

    Here's what the preferences screen shows:

  • Help! Lightroom 3 Color Swatch for Adjustment Brush has Disappeared!

    I selected the Adjustment Brush and then click on the color swatch icon. I remember changing the value to 0. Then the color swatch icon just disappeared.I've tried reseting everything in the adjustment brush settings but the color swatch icon is still gone. In addition to that, If I click on the Adjustment Brush to activate it and the click anywhere on the photo, the entire photo disappears. Has anyone had this problem? Do you know how to fix this issue? Thanks.

    I also tried restarting Ligtroom 3. That did not help. I tried rebooting my computer. That did not help, either.

  • Lightroom 5 Adjustment Brush has disappeared, just the cursor shows. I have no idea what size I'm using. Just happened for no reason. Looked in the Pref and nothing there to adjust etc.

    Just using the adjustment brush in Lightroom 5 on an image and suddenly the brush circles vanished lmao!!!!!! Can't find anywhere to get back, thought maybe I had touched a button by accident turning it off or something. All I get is the mouse cursor although I can use the brush but I have no idea how big the brush is or where the hell the brush is being used! Tried closing the Application and relaunching as you do and nothing changes, still no brush.
    Using Mac OSX 10.9.4 with Lightroom 5.6

    Hi GlennMorley
    Please try to start your system in Safe boot.
    Refer to below link on how to log in safe boot.
    http://support.apple.com/kb/HT1564
    Launch Lightroom and check if the adjustment brush appear. Then restart the machine normally and check in your original account.
    Thanks

  • No pin for the Adjustment Brush

    New photo imported into LR4, applied adjustment brush and noticed there was no pin or anchor point for the brush. What happend to the pin? Closed the panel. Then opened the adjustment brush again and previous adjustment brush pin is not there - I can't edit previous adjustment brush. I tried the gradient tool and it places the pin allowing edits, but I get no pin for the adjustment brush. All else seems to be working ok, all beit a bit slow.
    I've tried this multiple times on different images and I never get a pin for the adjustment brush. I even tried this on a dng file from LR3 with the same result - no pin.
    Windows 7 64bit - all updates applied
    Core2 Duo
    4GB Memory
    Nvidia Graphics Card

    No worries ... I think EVERY keyboard has a mind of it's own at times ...

  • Can I Move the Anchor Point for Adjustment Brush in ACR CS5

    It's never been a problem before, but the anchor point for the Adjustment Brush in ACR is sitting exactly where I need to see what is happening.  I can delete and start again, but if there is way to move or hide the anchor point while stil being able to adjust the setting, it would be handy to know for next time it happens.

    R_Kelly wrote:
    You can press the V key to toggle the pins on/off.
    Exacty what I was after.  Thanks.

  • The adjustment brush (mode A) disappears

    The adjustment brush disappears when I increase the size or the feather over certain limit. I can see the circles around the cursor (with + shape) when the adjustment brush is small but if I increase the size the brush disappears and then I see the windows pointer instead.
    Even if it is not there, it still works, but using it without the help of the circles is more difficult

    Same problem, how did you fix this?

  • TS1702 My purchased Draw Something App has disappeared from my iPhone, how do I get it back and will I have lost my points and current game?

    I have been using my draw something app for about a year and a half and suddenly it has disappeared from my iPhone.  What do i do now? I had loads of points and was up to about 30 on my latest game so if I download the app again will I go back to the start.

    Does a spotlight search on the device indicate the app is installed?
    Is the app selected to sync in iTunes?

  • Photoshop Elements 6 - paint brush took has disappeared from the tool box.  How do I get it back?

    Photoshop Elements 6 - paint brush took has disappeared from the tool box.  How do I get it back?

    Keep tapping the B key and it should reappear, or click-hold/right-click on whatever tool is currently visible right below the eraser.

  • Adjustment Brush in Lightroom 5 has a different sized effect smaller than the brush size

    Hi,
    When using Lightroom 5 Adjustment brush, the effect is only in the inner half of the brush size circle. In other words, if you select a 1 inch brush to darken, only about the center 1/2 inch is being darkened. I'm 100 percent sure the brush has no feathering, and all the settings are fine. An expert told me to try to get rid of preferences, and try it, and it still does the same thing. Now, I just updated to LR 5.7 hoping maybe it will fix it, to no avail. The LR on my laptop behaves perfectly fine.
    Attached is a screen shot and a phone shot (excuse the moire, I had to use a phone to show the brush size properly) to show settings and the effect I'm talking about, so it's perfectly clear.
    I have been putting up with this for months, but it's driving me crazy. Also, it occurred to me that all adjustments I make might 'change' later when I fix it, and it might show up unknown to me when I export the files later. And this would waste hundreds of hours of work if something resets somehow.
    Does anyone have any suggestions on how to fix this?
    Thanks in advance for all replies!
    Stu

    This problem is caused by changing the cursor size in the ACCESSIBILITY settings in your OS.  Here is a screen shot from the Mac but Windows has similar settings.  I reported this in Lightroom 2 or 3 and it is STILL not fixed. (Adobe's bug fixing rate to me is pretty dismal)   If you change your system cursor to anything except "Normal" you will get this behavior as Lightroom doesn't account for the system preferences.  I would like to make my cursor bigger but this prevents it.

  • No pin shows up with adjustment brush

    Using the adjustment brush, a pin is supposed to appear where you make your initial brush stroke. It doesn't show up, even though the effects of the tool are there. I only know what is painted by typing "O" so that the red coloring shows up. The pin does show up using the Graduated filter.
    LR2 trial version, Windows XP SP2, 3 MB RAM, 1.8 GHz duo core,

    Hit "H".

  • How do I turn off the curvature tool in CC, I chose the selection tool to create a box and the middle selector that allows you to adjust the size has disappeared?

    How do I turn off the curvature tool in CC, I chose the selection tool to create a box and the middle selector that allows you to adjust the size has disappeared? My coworker discovered making ti a compound path by right clicking it and selecting it. All I want to do is adjust the size of a box. please advise.

    You should post questions about using applications in the specific application's forum(s).
    Here is a link to a page that has links to all Adobe forums...
    Forum links page:
    https://forums.adobe.com/welcome

Maybe you are looking for

  • Wrong Drive Letter Assignment

    This issue caused about 8 hours of grief with trying to get the new iPod to work. The short of it is, when the iPod is connected, Windows was assigning a drive letter to it that was already in use, Drive F. It also happens that this drive mapping poi

  • Can't Open Numbers spreadsheets in iCloud

    I'm hoping someone can help me ... I have some numbers spreadsheets saved in iCloud.  When I go to open them, it says that the file can't be opened, whether I try to access it from my Mac or from the Icloud website.  I was able to get a preview of so

  • Photoshop Album 3.0 Starter Edtion

    I have loaded the above program from a cd which seemed to be ok.On trying to use it I get the following error message, Buffer over run detected Program n\3.0\apps\photoshop album starter edition.exe A buffer over run has been detected which has corru

  • How to read the content of html page? (written in JSP)

    The same with readContent("http://www.urcompany.com/readPage.html")

  • Newbie Map File question

    I have inherited a huge project in RoboHelp which contains multiple map files. One of the map files is the custom map file that was apparently imported. This is the only one I need, yet there is also a BSSCDefault.h. When I right click to delete, it