Adjustment brush is only working on the outer edge of all of my photos, why?

I've just downloaded LR 4, watched tutorials but my adjustment brush only works on the outer edge of my photos. The brush changes to an arrow when I move towards the center of the photo. Why?

Thank you so much.
I took this and wrapped it all in an if statement.
Since Liability_Continued was my master page, the script ended up looking similar to this:
if (xfa.datasets.data.job.data.state.value == "NY"){
var oMaster = xfa.resolveNodes("Liability_Continued");
for (var i=0; i<oMaster.length; i++) {
oMaster.item(i).footer.liabilityFooterBig.presence = "visible";
oMaster.item(i).footer.liabilityFooter.presence = "invisible";

Similar Messages

All Adjustment Brushes only work in the lower parts of my pictures. In the upper parts the tool view

All Adjustment Brushes only work in the lower parts of my pictures. In the upper parts the tool view changes to a "normal" mouse pointer. (MBP, 10.8.5m, LR 5.3).
Uwe

Try: [/questions/790833]

HELP! Lightroom Crashes Only with Adjustment Brush and only when using HDMI output!

This is very frustrating. I use my Acer N56V laptop to teach Lightroom workshops. I use a 32 inch television as a display. When I have my laptop attached with an HDMI cable and try to use Lightroom's adjustment brush, it crashes. Either the screen and computer just shuts down or I get the Blue Screen of Death. I can do anything else! I can edit in Photoshop, do anything else in Lightroom or even Silver EFX Pro. I can even click on the adjustment brush. But the minute the brush hits the photo (and not before), the computer crashes. If I don't have it attached to the HDMI or if I use a Serial cable, no issues. It's only the adjustment brush and only the HDMI output.
I called Adobe and they said it was because my onboard video card was primary and not the Nvidia. I called Acer and they said it's auto detect. I also tried making the Nvidia card primary and it still happened. Any ideas???

You have switched the overlay mask to always show. Fortunately, it's easy fixed i.e. tap the O key. Shift+O will cycle the overlay through various colours
Other Adjustment Brush and Graduate Filter shortcuts and modifiers are listed them below:
Open Adjustment Brush - K
Open Gradient Tool - M
Show/hide Pin - H
Always Show - Shift + Cmd/Ctrl+H
Show Selected/Never Show - Shift+H
To increase Amount - Right Arrow
To decrease Amount - Left Arrow
To increase/decrease brush size - ] / [
To increase/decrease feather - Shift+] / Shift+[
Set Flow Amount - Number Keys
To commit and/or start new a brush stroke or gradient - Enter / Return
To delete the selected pin - Delete
Holding down - Alt/Option key activates erase mode
Toggle Auto Mask On/Off - A
Pressing O toggles on/off the overlay
Shift+O cylces through alternative colours for overlay
To constrain gradient to vertical/horizontal - hold down Shift plus drag
To invert the gradient - '
To scale from center - Alt/Option plus drag

I don't know what's wrong with my camara it's all black and the front only works not the back

I don't know what's wrong with my camara it's all black and the front only works not the back

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

MBPro 17 Intel Core 2 Duo Audio only works with the headphones?

MBPro 17 Intel Core 2 Duo Audio only works with the headphones?
There is a red light constantly emitting from the headphone socket?
I can not listen to sound unless headphones are plugged in - when taken out I get a red light and the volume controls kets seem locked?
Please help!
Julian

Hi Kitty.
Seems to be quite a popular problem. In another post, I posted the following.
"The red light is the data signal that is transmitted if you plug in an Optical Audio device such as surround sound speakers. I had the same problem for a short while with my 17' MBP. Sound was working fine from my built in speakers but I plugged in some earphones to listen to something that I did not want the rest of the office to hear and after pulling the hearphones out, the optical signal (red light) was being transmitted. The switch Cessna is referring to is the switch that is triggered inside the port that tells OSX that earphones/optical audio device is plugged in and to shut down power to the built in speakers. When the device is un-plugged from that port, the switch should get triggered again and power up the built in speakers and disable the optical light signal. Perhaps there is the slightest defect on the earphones you are plugging in that are preventing it from triggering the switch when the earphones are un-plugged.
Try a different sent of earphones to maybe trigger the switch if you are uncomfortable with the paper clip solution."
That seemed to solve the problem for that user.
The link to the post is http://discussions.apple.com/thread.jspa?threadID=895286&tstart=30
Good luck

My movie I recently downloaded from itunes "Act of Valor" only works for a out 5 chapters, then it stops working. Other movies work on my iPod touch. How do I fix this issue? If I can't, can I get my money back?

My movie I recently downloaded from itunes "Act of Valor" only works for a out 5 chapters, then it stops working. Other movies work on my iPod touch. How do I fix this issue? If I can't, can I get my money back?

- Go here and see if you can redownload the movies. If you can then delete the movie and redownlod it.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Otherwise, contact iTunes and explain your problem. They should allow a free redownload.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

How do I create a cut-path ONLY on the outer edge of my vector image?

Okay, I have a dilemma. This could be one of those things that is so simple when explained, but at this moment in time it has me scratching my head.
Here I have a vector image. The pink stroke is a cut path that the software I use at work recognises and cuts. (Used for vinyl decals/stickers etc). All the lines highlighted in pink is useless to me, as it would cut out each individual line.
All I need is the outer edge of the entire graphic.
Note my crudely drawn red lines that border the image, that is exactly what I need. As you can see, the paths run through the image. BUT...When I try to erase the paths using add anchor point then cut path at selected anchor points so I can remove that particular segment, the colour essentially "leaks" as it isn't a closed area anymore. Rasterizing the image destroys the quality and I would like to be able to perform this task without loss of quality.
If anybody could help, I'd be eternally grateful!
Thanks,
Ben

Ben,
As far as I can see there are three sets of pink strokes, and I guess you wish to use the outermost one and have it form one continuous path round everything and in the hole between the letters.
Presuming you have the other strokes under control, you may be able to copy everything to the top of the stacking order and then, with all the copies selected, Pathfinder>Unite to get that compound path with pink stroke and no fill, which you may then split into one path for the outside and one path for the hole if needed.

Flash Player only works for the account that downloaded it

I downloaded flash player and did not specify any special preferences, however, it doesn't work for the 2 other accounts on the computer. It only runs for the Administrator account from which i downloaded it. I'm running XP professional. Can someone tell me how to fix this?

hi, i had already deleted cookies, temp internet files, etc;
i only have the IE pop up blocker and blocking level set at Medium;
it's the latest version of FP 10.0.45.2.
I installed this version a couple of weeks ago and it worked ok for all accounts (the other 2 accounts are not admin) for a week. Then, it stopped working for all accounts, i reinstalled it (some trial and error involved), then when it finally reinstalled, only works for the one account. i just tried to reinstall from one of the other accounts and error mssg said "failed to register"
Date: Sun, 6 Jun 2010 11:20:59 -0600
From: [email protected]
To: [email protected]
Subject: Flash Player only works for the account that downloaded it
Hi ol, I would go to Tools, click on Internet Options and clear the Temp files. Delete Cookies, Delete Files, including the off line content. I would do this using all accounts. Also check the history files while you are there and delete those also unless you have done so recently.
What version of Flash Player do you have Installed?
Do you use any adblock or pop up blocker software?
Thanks,
eidnolb
>

I purchased a new vehicle with a USP port but my nano model A199 will not work, only works with the aux plug which will not allow me to view the songs on the vehicle touchscreen. Is there a download I can get to put into this nano?

I purchased a new vehicle and the older ipod nano I have will not work through the USP port, only works through the aux plug. Is there a download i can get toput into the nano that will then allow me to use the USP port instead of the aux port?

Check with your dealer and see if there is a special cable available for connecting your iPod. It should have a dock connector on one end and USB and miniplug on the other.

Including image in SharePoint survey answer and hiding elements only work on the first page

Hi All,
I would like to add some text/remove some text etc on a sharepoint survey page.
Which i have done using jquery/jscript.
But unfortunately it only works on the first page.
Any ideas how i can get it to work on all the pages?
See a sample here on how you can add the scripts:
http://sharepointkings.blogspot.com.au/2011/05/include-image-in-sharepoint-survey.html
Cheers

Hi Patrick, does the first page use the same ASPX file as the other pages? If not, you will need to add your jquery/jscript to the other page as well.
Dimitri Ayrapetov (MCSE: SharePoint)

The CustomDatumExample.java only works if the Employee object has 2 attributes.

The CustomDatumExample.java only works
if the Employee object has 2 attributes -
(EmpName and EmpNo). If I try to add
another attribute to the Employee object I get java.lang.ArrayIndexOutOfBoundsException: 2 on the getAttr3 method.
Anyone know why? Thanks.
Employee object
CREATE TYPE employee AS OBJECT
(empname VARCHAR2(50), empno INTEGER,
attr3 VARCHAR2(50));
Custom object class
public class Employee implements CustomDatum, CustomDatumFactory
public static final String SQLNAME = "EMPLOYEE";
public static final int SQLTYPECODE = OracleTypes.STRUCT;
MutableStruct _struct;
static int[] _sqlType =
12, 4
static CustomDatumFactory[] _factory = new CustomDatumFactory[3];
static final Employee _EmployeeFactory = new Employee();
public static CustomDatumFactory getFactory()
return _EmployeeFactory;
/* constructor */
public Employee()
struct = new MutableStruct(new Object[3], sqlType, _factory);
/* CustomDatum interface */
public Datum toDatum(OracleConnection c) throws SQLException
return struct.toDatum(c, SQL_NAME);
/* CustomDatumFactory interface */
public CustomDatum create(Datum d, int sqlType) throws SQLException
if (d == null) return null;
Employee o = new Employee();
o._struct = new MutableStruct((STRUCT) d, sqlType, factory);
return o;
/* accessor methods */
public String getEmpname() throws SQLException
{ return (String) _struct.getAttribute(0); }
public void setEmpname(String empname) throws SQLException
{ _struct.setAttribute(0, empname); }
public Integer getEmpno() throws SQLException
{ return (Integer) _struct.getAttribute(1); }
public void setEmpno(Integer empno) throws SQLException
{ _struct.setAttribute(1, empno); }
public String getAttr3() throws SQLException
{ return (String) _struct.getAttribute(2); }
public void setAttr3(String attr3) throws SQLException
{ _struct.setAttribute(2, attr3); }
}

You also need to add an appropriate element to the _sqlType array.
In practice, it is easiest to have JPublisher regenerate the CustomDatum class when you have changed your object type definition:
jpub -user=scott/tiger -sql=EMPLOYEE:Employee

I have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

Hello Sirving575, sorry but the metro version of firefox has been cancelled, see : https://blog.mozilla.org/futurereleases/2014/03/14/metro/
thank you

'On open' only works in the same folder?

I'm running an 'On open' script but it only works when the folder to be processed that placed onto the AS is in the same folder.
Is there a workaround?

I'm not familiar with ImageMagick, but there are a couple of issues with your script.
1) The on open handler takes the files dropped on the application as it's arguments, but you are using the Finder's currently selected items.
2) File paths that might contain spaces should be quoted, or your shell script will break when it tries to do something with the space delimited items.
If you are just trying to create a text string that contains all of the (selected or dropped) items, something like the following should work (I just used a dialog to show what the shell script would be - you should test before using mogrify on original files):
Finder selection:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into the Script Editor">
set upath to ""
tell application "Finder" to repeat with f in (get selection)
set chosenfile to quoted form of POSIX path of (f as text)
set upath to upath & chosenfile & space
end repeat
display dialog "do shell script " & "/opt/local/bin/mogrify -format jpg " & upath & "*.psd"
beep 2
</pre>
on open handler:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into the Script Editor">
on open TheItems
set upath to ""
repeat with f in TheItems
set chosenfile to quoted form of POSIX path of (f as text)
set upath to upath & chosenfile & space
end repeat
display dialog "do shell script " & "/opt/local/bin/mogrify -format jpg " & upath & "*.psd"
beep 2
end open
</pre>

Adjustment brush is only working on the outer edge of all of my photos, why?

Similar Messages

Maybe you are looking for