Adjustment Brush not working correctly

Since moving to LR 5.6 the adjustment brush has not worked correctly.
I am unable to adjust the size of the brush using the scroll function on my Mac mouse.When I try to do this I can see the slider moving indicating the size of the brush but nothing actually happens.When I try to adjust it using the slider itself again nothing happens.
Has anyone else experienced this problem or can you offer some advise please

The ACR plug-in files for PS-CS6 and PS-CC are in different folders, but the camera profiles and lens profiles are in a common folder. Since updates to ACR are typically handled by the product, itself, not direct-link downloads that you must have saved for ACR 7.1, I don’t know what the error means in relation to CC having a newer ACR.
What version of ACR did you have installed for CS6 before you tried to update to ACR 7.1? Are you trying to downgrade from a higher version of ACR on CS6?
The first thing I would try is install ACR 8.3 RC for PS-CS6, using the CS6-specific link at Adobe Labs.
If you really need to go back to an earlier version of ACR, then the Adobe-approved method is to uninstall PS, entirely, then re-install it to get the older version.
It may be that you have to uninstall both CS6 and CC and then install CS6, first, and get it updated the way you want it, then install CC, again, and update it how you want it. That seems like a lot of work, though.
Why are you wanting to install ACR 7.1 for CS6?
If you plan ahead, then the way you can switch between different versions of the ACR plug-in, is to save your Camera Raw.8bi file each time you upgrade (I rename mine so the extension is the version: Camera Raw_8bi.71 and leave them in the same folder), and just replace whatever version of the ACR plug-in with that one you want.

Similar Messages

Lightroom adjustment brush not working

My adjustment brush was working fine, I took a break, and when I came back the brush won't do anything. The pin appears but the image doesn't change. I've tried adjusting size, feather, and flow all over the scale, and I've pushed the exposure down as far as it will go so I can see if anything happens. None of the regular exposure, highlight, shadow... settings are doing anything. It is showing up in the history bar but no change to the image.
I have tried closing and reopening the program and restarting the computer. It's been several days and I still can't get it to work

Try deleting your preferences file
Preference and other file locations in Lightroom 5

Adjustment brush not working in camera raw cs6

The adjustment brush in Camera Raw PS6 is not working properly. The slider makes a slight change but I can do no local adjustments. All other parts of Camera Raw seems to be working. I have restored the computer. Is there a toggle I do not know about?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Lightroom 5.5 for Mac Adjustment Brush not working

Hi all, since updating to Lightroom 5.5 for Mac Adjustment Brush has stopped working entirely. I can open the menu and it does display the brush within the menu. When dragging the tool into the image it changes to the mouse arrow which doesn't have any function. Any ideas? Thank you very much for your help. Chris

And- do you actually press or hold down the left-mouse button and drag the cursor on the image? as you would a paint brush. A 'Pin' will appear where you start the brush stroke.
And- Is it possible that you have the switch at the base of the brush panel sliders turned off ? (The toggle switch on the same line as "Reset" and "Close")
Pressing "O" only turns the overlay mask on/off to give a visual indication 'Where' you have applied the brush.
Pressing "SHIFT+O" changes the colour of the MASK overlay- Red, Green, Grey, Clear
"O" does not affect any editing of the image.

Adjustment brush not working on new Mac with Snow Leopard

Just purchased a new computer a couple of weeks ago. Not sure if something is incompatible or something else. I'm can't remember if the brush ever worked on the new machine. Also updated to Snow leopard 16.2 during this period.
I see the adjustment brush and can change it's size and feathering, flow and density are set at 100%, masking is off, it set down control points, but that's it. It makes no visible changes to the image in any mode. If I put exposure at 4 stops and place it on a mid-tone there is no change to the image, either in Lightroom or upon export.
I've run permissions checks, trashed the preferences and repaired the drive with Diskwarrior all to no avail.
Lightroom 2.5, Power Mac 2.66 Ghz Quad Core Intel Xeon, 6 GB of factory installed memory, Snow Leopard 16.2
Should I try a fresh install of Lightroom??

Sorry,
My post above should have read Mac Pro. I recently switched and keep getting the names mixed up. Doesn't help that they look the same.
Rich Quindry

Adjustment brush not working LR 5

Why isn't my adjustment brush working when it was working before. New LR version 5...had less than one month

Have you made any changes to your computer or updated the OS?
What exactly is happening when you click on the brush tool icon or press the K key to activate it?
If you press the O key to display the overlay can you see if the brush tool is making a mask when you paint on the photo?
Check that you have not set the brush to Erase ; click B for the standard brush or A for a brush with auto-mask edges.
Make sure flow and density is set to 100 unless you wish to gradually build up the effect (flow) or Place a limit on the effect (density)

Adjustment Brush not Working

in the Develop module my adjustment brush is not working, all the other sliders work, what is wrong?

Are you moving the sliders with the "pin" for your brushed area selected? When the "pin" is selected, it looks like a black circle surrounded by a very light gray circle and then a very thin black circle, like this:
What numbers do you move the sliders to?
Did you accidentally turn off the brush adjustments? The little doohickey highlighted in the red box, shown here, should be in the top position
Lastly, I am asking you to perform a very specific experiment, and report the results, and it does not appear that you have done so, or at least, you have not stated clearly that you have done so.
Please, click on "New" in the brush tool, then set Exposure to -4 and Flow to 100 and Density to 100, and brush. Report what happens.

I have LR 3.4 & 3.6... Adjustment Brush not working

I have LR 3.4 & 3.6... The adjustment brush is not working... I see people are having problems with LR 4 and are removing the preferences thing, but I don't see anything about LR 3 with this happening... I have it on my laptop and it doesn't work... So far the PC upstairs is still working... so not sure what happened on the laptop...
How do I fix it here?

There's no effect when I brush over the area.
I've tried exposure, brightness, teeth whitening and iris enhance... None of the changes they should make are showing...
I will try to remember to get a screen shot of the panel tomorrow when I've got the laptop again.

Adjustment brush not working in lightroom 5.7

The adjustment brush sliders don't appear to do anything anymore in Lightroom 5.7. Does anyone else have the same problem?
I don't need workarounds - this should work.
Thanks folks.

And- do you actually press or hold down the left-mouse button and drag the cursor on the image? as you would a paint brush. A 'Pin' will appear where you start the brush stroke.
And- Is it possible that you have the switch at the base of the brush panel sliders turned off ? (The toggle switch on the same line as "Reset" and "Close")
Pressing "O" only turns the overlay mask on/off to give a visual indication 'Where' you have applied the brush.
Pressing "SHIFT+O" changes the colour of the MASK overlay- Red, Green, Grey, Clear
"O" does not affect any editing of the image.

Adjustment brush not showing correction options

I am in the Develop module trying to use the Adjustment Brush. After selecting the brush I am not seeing the window below that allows me to apply the corrections (exposure, contrast, etc.) I want. This window does show up if I select Graduated or Radial filters.
Any suggestions would be appreciated.
I am using LR5 with Windows 7 and have ensured that there are no LR updates avaialble. I have the latest version.
Chris

Click the black triangle to the far right of the word "Effect:"

Adjustment Brushes not working (3.0 & 3.2)

While processing some images the other night, using the adjustment brushes, burn, 3 large white squares appeared on the image for a few moments (5 seconds or so) before disappearing.
Since then, the adjustment brushes have no effect what so ever on my images?
Thanks
James

Hi James
After selecting the Adjustment Brush press O (for overlay) so show the area being masked.
You can then move the sliders e.g. exposure, saturation, clarity etc.) to adjust the masked area (usually shown as a red selection).
You can press O repeatedly to toggle the mask on and off.

LR2 Adjustment Brush not working?

I just got Lightroom 2 and have tried over and over to use the adjustment brush, but I haven't seen ANY results. A black circle with silver lining shows up where I click the picture with the brush. I have heard that clicking "O" makes the adjustment show up, but I've tried it and nothing happens. So, help! Am I missing a simple step or something??

Hi Emily,
One of the mask overlays that you get when pressing 'O' and shift + 'O' is clear and makes it impossible to see the results.
Press O to make the mask active and then press Shift O a few times to cycle through the masks.
If you put the exposure at -2 you should see the area darkening as you brush.

Eraser and Brush Not Working Correctly (picture)

For some reason photoshop at times will only let me erase or draw within the confines of a specific layer. It seems to happen randomly without me accidently hitting a hotkey of some sort.
For instance in the image below, I was drawing and randomly I noticed I could no longer draw. It would only let me use the brush/erase tool within the confines of the line work I had already established. Please see image below to clearly illustrate the problem. The only way I have been able to correct this so far is to completely restart photoshop.
Thanks

Thanks for posting more info. So you say you're simply unable to paint anything on the AnimalSketches02 file?
Honestly it looks as though everything is in order. It's maybe a bit less common to be painting on a transparent layer than painting on a solid layer, but clearly it works for you some of the time.
Only thing I can think of is to try resetting the Brush Tool to see if that helps bring function back (right click in the little brush icon near the upper-left corner), and also checking to see if any display driver updates may be available. What video card do you have? I ask, because if it's ATI you probably want Catalyst 12.8 drivers, specifically, rather than any newer ones.
I assume you're sketching using a tablet. You might also want to check to see if maybe the problem is that pen pressure is being lost somehow. Does the cursor move? What happens if you then try to use the mouse to paint a stroke?
-Noel

Adjustment brush not working on Power Mac w/ Snow Leopard

Running Lightroom 2.5. I've done permissions repairs, run DIsk Warrior and a re-installed - nothing works. Works fine on my laptop with Tiger. Power Mac 2.66 Ghz Quad, 6 Gigs of Apple Ram, OS - 10.6.2. The brush is visible, lays down a point, but makes no visible change to the image. I'm totally frustrated with this.
Anybody else having this problem? Any ideas?
Thanks,
Rich Quindry

Sorry,
My post above should have read Mac Pro. I recently switched and keep getting the names mixed up. Doesn't help that they look the same.
Rich Quindry

Brush function not working correctly PS Elements 11 for Mac

The brush is not working correctly in that I cannot drag the brush. It allows only spot healing, not dragging the brush. Didn't use to have this problem. Now do. Not sure what has changed. Thank you!

Is this happening after upgrading to Yosemite?
If yes, please see:
Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
Thanks,
Anwesha

Adjustment Brush not working correctly

Similar Messages

Maybe you are looking for