Adjustment brush sliders not working

In the develop module, the adjustment brush sliders seem to have no affect on the area brushed.  Did I do something to change that or is there a fix for it.

Check the position of the Flow and Density sliders, at the bottom of the panel, you may have set them accidentally to zero
HTH

Similar Messages

  • I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

    I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Local Adjustment Brush does not work in Windows 7, 64-bit

    All other tools and functions work OK.  My issue is just with the Adjustment Brush;  The Adjustment Panel opens when the brush is selected and the brush moves, but none of the adjustments are applied to the image.  The problem is clearly related to the new operating system.  This was just confirmed, by removing the hard drive with the Windows 7, 64-bit OS,  and inserting an old hard drive with Windows Vista, 32-bit installed. The adjustment brush works fine with the old OS and the same version of PS.
    My normal monitor resolution is 1920 x 1200 with a DPI of 151; however, this DPI is not compatible with PS, so I reset it to 149 evey time I use PS.  Lower screen resolutions and DPI settings don't resolve the problem. I mention this only because of a previous cursor problem that was resolved by changing the DPI.
    I'm using CS4 with Camera Raw version 5.6.  Version 5.5 also does not work.
    Can anyone offer suggestions?

    Problem solved.  One of the recent upgrades to Camera Raw reset the flow rate to zero, which I did not notice until after posting the message.
    Sorry for the error.

  • The adjustment brush is not working

    When I select the adjustment brush and paint across the image no changes are made. I have tried moving the sliders to the extremities but no effects to the image are made. It is very frustrating

    I have tried moving the sliders to the extremities but no effects to the image are made.
    Check to be sure Density and/or Flow are not set to 0.
    when I click to create a new pin the small circle or pin is not there as expected
    Press H (Hide) key to toggle pin on and off.

  • The lightroom 4 brush is not working

    I installed  lightroom 4 trial program. But, the brush is not working. The brush only can make a dot but can't move the dot and change anything. Could you tell me how to fix the problem?
    Cheers,
    Tony

    Hi Keith,
    Thank you for helping me. I do not know how to adjust the brush parameters to zero. I tell you what I have tried again but the brush is not moving.
    Select DevelopClick DoneClick BrushClick ResetIn effect, click Restore Default PresetsIn Show Edit Pins, choose AlwaysTicket the show select mask overlayChoose brush AAdjust size to 0.1 feather to 0, flow to 1. The brush was not moving. It only had a dot on the picture.Then, adjust size to 5.7, feather to 31, flow to 3. The brush was not moving, too.I am sorry. I really need your help again.
    Thanks a lot,
    Tony
    Date: Mon, 20 May 2013 07:47:19 -0700
    From: [email protected]
    To: [email protected]
    Subject: The lightroom 4 brush is not working
        Re: The lightroom 4 brush is not working
        created by Keith_Reeder in Photoshop Lightroom - View the full discussion
    That sounds like it is working, Tony - remember that once you've painted where you want the effect of the brush to apply, you need to adjust the brush parameters, which all start off zeroed.
    If you want to see where you've applied the brush, press the (letter) "O".
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5336211#5336211
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5336211#5336211
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5336211#5336211. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Lightroom by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • LR6 Adjustment Brush Pins Not Visible?

    Just installed LR6 (licensed) this morning. The adjustment brush seems to work, but the adjustment pins are not visible after exiting the brush dialog (can't see the pins to select for further edits). Reference attached image: there should be two brush adjustment pins visible, approximately where I've placed the red circles.
    Thanks in advance!

    Done.  Thanks, Jim!

  • Local Adjustment Brush Sliders Are Gone

    I did a reinstall, repair actually of LR 2.6 due to blue screen errors (which turned out not to be LR related) and now my local adjustment brush sliders are gone! I've got the old style, one slider with the other controls being + & - buttons. I've got no clue what else is gone but I would like my sliders back.
    What happened? LR says it's the most current version.

    Jim,
    In the upper right corner of the brush panel is a little whte buttton. It is on the same line as "adjustment:".
    Click that button to reveal your sliders
    Rich

  • Brush function not working correctly PS Elements 11 for Mac

    The brush is not working correctly in that I cannot drag the brush.  It allows only spot healing, not dragging the brush.  Didn't use to have this problem.  Now do.  Not sure what has changed.  Thank you!

    Is this happening after upgrading to Yosemite?
    If yes, please see:
    Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
    Thanks,
    Anwesha

  • CS5 - Mixer Brush - Wetness not working properly

    Hi,
    I'm using the trial version of Photoshop CS5 Extended.
    I'm very excited about the new Bristle Brushes and the Mixer Brush. I think, a nice job was done on these features. However, I think the "wetness" attribute of the Mixer brush is not working as it is intended. I would expect that low setting of wetness would cause the brush to interact less with the underlying color. At the moment, when set to 0% wetness, the Mixer Brush does not interact at all with the underlying color but at 1% wetness it fully interacts with the canvas. There is no perceivable difference between 1%, 50% or 100% wetness. I think this should be fixed in order to enable the full power of the Mixer Brush.
    Apart from that, the new brushes are just awesome. It is the most haptic and expressive brush engine I've ever used.
    Thanks,
    DanieL

    This seems to be a problem with the Bristle Brushes only and is quite annoying considering that the Bristle Brushes are practically made for the Mixer Brush.  Other brushes seem to use the Wetness slider just fine.  Here's an example:
    I hope Adobe fixes this in a patch.

  • Brushes are not working for lightnening

    My brushes do not work, for lightening.  I restet them and did control alt shift already.

    Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
    job-immediate-alerts
    job-daily-alerts
    job-weekly-alerts
    Please check this wiki -
    Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • The brush do not work sometimes without a reason.

    Sometime without a reason (I mean I cant find one) the brush do not work (it appears the symbol when you are not able to use a tool), to solve the problem I copy and paste everything on a new document, but it is very messy, what am I doing wrong?
    Thanks for the help!

    Hi thank you for the answer,
    can you be a little more specific? How can I solve this?
    I have not understand this:
    The brush tool will only work when there's a brush present in the brushes panel ("Basic" doesn't count as a brush)

  • Since updating to v.3.4.5 adjustment brushes no longer work? Please help??

    Hi Guys,
    I have just updated to Aperture 3.4.5.
    Annoyingly the adjustment brushes and sliders such as "straighten" no longer work. They are added to my adjustments panel when I select them from the drop-down menu, but are accompanied by the sound of the dreaded apple beep (suggesting something is wrong) and do not change the cursor into the appropriate tool, thus preventing me from carrying out these particular adjustments.
    If someone has any solutions for this problem, it would be greatly appreciated!
    Thanks.

    Test again in a different user account with a small test library. Does it still not work for a different user after reinstalling?
    And test in your regular account with a small test library.
    is it possibly something to do with an incombatiability between the new update and a plug-in?
    Which plug-ins are you using? Are they all compatible with Aperture 3.4 and Lion?
    Aperture 3.4 and later: Some third-party plug-ins are no longer compatible

  • The adjustment brush suddenly stopped working in Lr CC (among other things)

    1. All of a sudden the adjustment brush stopped working in my Lr CC. The little buttons that you can click on to activate your adjustments are gone and when I open files where I have done adjustments they are still there but no "buttons" to click and consequently I can not make any changes or new adjustments. For example; in the image I have inserted I have made adjustments with a) Sharpness, b) Skin Softening and c) Iris Enhance and the adjustments are still there but no "buttons" any more and therefore I can´t change anything. I edited this image April 29 and 30 when Lr still worked fine. Today (and yesterday) things has really start spooking around with Lr.
    2. After having saved an image in Ps CC as a psd-file going back to Lr CC for cropping Lr continuously reloads and resets all edits that I have done or are trying to do.
    Everything has been working earlier but the past two days things like the above has stopped working.

    Well, all problems regarding this are solved after having talked to Adobe's support. After having backed up my lrcat we deleted the Lightroom 6 plist, emptied the trash can and then restored Lightroom to its default values during the start-up process.

  • Lightroom 4.2 adjustment brushes aren't working (and weren't before update either)

    When I go to use my adjustment brushes, I would select the one I wanted to use and then go try to use it.  As soon as I first let go of my mouse, the brush would change to custom.  Since updating to 4.2, that has stopped switching, but my brushes still don't work. I have tried multiple brushes and it's all of them, not just one particular one.  I have tried restoring my presets, that didn't work. I have tried deleting all of the presets from the folder, restarting Lightroom and re-importing them, that didn't work. I updated Lightroom, that didn't work.  I have restarted my computer and that didn't work.  The thing is, is that they HAVE worked before.  I was switching between some catalogs and once I was done with that, they stopped working.  So I'm not sure if I did something while switching between catalogs or not.  I use these brushes all the time and they are a significant part of my workflow!!! Any ideas?

    Hi Maggie, do you mean the preset name changes to custom?  Does that sound like this bug: http://feedback.photoshop.com/photoshop_family/topics/lr4_1_self_created_preset_brush_prob lem ?
    When you say they don't work, have you checked the Flow slider value?
    And if you go to preferences, is 'store presets with catalog' checked?  That could explain it working in one catalog but not others.

  • Color Picker Sliders not working ?

    I'm using Dreamweaver CS6 and every time I try to pick a color using the Color Picker Sliders, it doesn't save it, have any of you encountered this issue ? Is there a way to fix this ?
    Thanks!

    I get the same issue, most of the time it seems to work, but last night I selected a CSS style by double clicking it, I needed to make the background colour lighter so I selected System Color Picker and then chose Color Sliders followed by HSB Sliders.
    Adjusted sliders to required colour, clicked OK and... nothing... The colour selected did not change in the selector box.
    Selecting default colour, transparent or a colour from the main colour picker works. But using the Color picker Sliders does not work at all.
    Anyone know of a fix for this?
    I ended up screen capturing the colour, loading into Fireworks and sampling the colour, Have now added digital color meter so I can use this while I await a fix.
    I am running Mac OSX Snow Leopard on an iMac, will try later on my MBP

Maybe you are looking for