Adjustment in Subcontracting
D/ F,
If vendor informs that lesser/ larger qty of component material was used- then adjustment ha to be done. Where & when? Pls advice.
Thank you.
Hi Siddhant,
Go to MIGO tcode, select A11Subsequent Adjustment and R01Purchase Order and execute the transaction.
All the components appear below. Enter the lesser/larger component quantity in the "Qty in UnE" field. If its undercompsumption , select the check mark in the column" Undersonsumption/Short Receipt". If its over compsumption, then donot check the box.
Notice that in the Where tab in the item details section, the movement type changes . For overconsumption, the movement type is 543 , for underconsumption its 544. and save the Migo t code.
Note that if its over consumption, then you would have to provide components to the vendor using transfer posting using Movement type 541. ( Use MB1B using purchase order or MIGO )
Hope this helps..
Similar Messages
-
Error:subsequent adjustment in subcontracting
While posting subsequent adjustment for a subcontracting P.O,getting the error "The system could not copy the sub-items in this line".The quantity field for the main item is having a default value 0 and it was disabled for input.
I have maintained a BOM of the main item with usage 1.What is the transaction are you using for susequent adjuments.While receiving intitial GR you might have entered some differences for sub line items.If yes then use MB04 to settle the same.
-
Subsequent adjustment for subcontracting
please explain about Subsequent adjustment for subcontracting
Hi,
Please find the following use of subsequent adjustment:-
After the subcontractor (as vendor) had delivered the ordered material (end product), you posted the goods receipt to the subcontract order. The system determined the necessary components for each purchase order item and created for each component a goods issue item with the quantity that was determined in the purchase order (see Entering Goods Receipt for the Subcontract Order).
If the vendor informs you after these postings that a greater or smaller quantity of the subcontracting components was actually consumed than planned in the purchase order, you must post a subsequent adjustment to correct the component consumption.
You can also refer following link.
http://help.sap.com/saphelp_470/helpdata/en/4d/2b908943ad11d189410000e829fbbd/frameset.htm
Hope this will help you.
Deepak -
Customization part to confifure subsequent adjustment in subcontracting
Hi,
I want to know what configuration settings required to perform if we want use use subsequent adjustment process .
regards,
zafarDear friend,
See if your getting back that scrap material from vendor side at the time you has to define new material that material should be maintained in components in purchase order itself in a negative quantity( the scrap qty your receiving from vendor)
when you receive the material from vendor the raw material will be consumed by 543 movement, and scrap material will be received by 545 movement type,if you want to adjust the subsequent adjustment at the time you has to mb04 there you can adjust the receiving stock or consuming stock
if vendor has done scrap for those material you don t want receive from him from there only you want scrap that material at the time use 551 O movement type (subcontract stock for scrap)
Regards
Pramod -
Subsequent adjustment in Subcontracting
Hi,
Can you explain the process of sub sequecnt adjustment process in subcontracting, is there any customization setting required for this.
regards,
zafarHi
Subsequent adjustment is usually done if the vendor has consumed under/excess input materials ( other than the BOM quantities)
In such cases you need to adjust the input material lying at the vendor by making a subsequent adjustment entry through MB04 or MIGO -Subsequent adjustment
In you have consumed physically more material the movement type 543 will be trigerred(you are consuming more material than the stipulated one in BOM)
In you have consumed less material physically the movement type 544 will be trigerred
Note that the entries which you pass has a financial implication i.e any subsequent adjustment entry will subsequently cause a change in the value of the output material
Regards
Sandeep -
Subcontract raw material consumption adjustment
Dear All,
I have made GR for subcontract material as below
1) out put material 100 pcs (101 mov type)
Input materisl 10 kgs (543 Mov type)
but later i got to know that what ever input mateirial was consumed in actual is higher
so actully counsution need to be 30 kgs
so pl guide me how to pass this balance 20 kgs entry for input mateirial over consution.
Regards,
VimleshUse Subsequent Adjustment function in MIGO. 121 Movement will hit here.
Subsequent adjustment for subcontracting .This movement type cannot be entered manually. With a subsequent adjustment for a subcontract order it is possible to correct the consumption of components. In this case, the material produced by the supplier is credited with the excess consumption / under-consumption. For this reason, if there is a subsequent adjustment, an item is generated for the produced material using movement movement type 121.
Movement type 121 does not have a reversal movement type. Possible special stock indicators: O, E, Q -
About Movement type used in Goods Issue from Subcontracting Stock directly
HI SAP MM Expert,
We have transfer material to subcontractor through transfer posting using Mvt. 541 and raised subtracting challan also. Material is not returned by Subcontractor and now we want to debit Subcontractor A/c . For w we want to mkae Goods Issue (Direct consumption) from Subcontracting Stock and raised debit note subcontractor through FI. In this case what movement type & Transaction code should be used to consume stock from subcontractor account and t.code for raising debit note to subcontractor in SAP R/3 system.
Pls. suggest the process.
Regards
VKMFor subsequent adjustment to subcontracting stock use transaction MB04
If the vendor informs you that a greater or smaller quantity of the components was actually consumed than planned in the purchase order, you must post a subsequent adjustment to correct the goods issue posting. The value of the goods receipt is recalculated to include the
subsequent adjustment quantity. (SAP transaction MB04)
Subsequent Adjustment to Subcontracting PO (Move 121/544)
Negative adjustment (Vendor Consumed Less but you Consumed
more in SAP and subsequently you did minus adjustment to component consumption
in SAP)
Debit
- Raw Material Inventory (S)
Credit
- Vendor Subcontracting Charges (H)
Subsequent Adjustment to Subcontracting PO (Move 121/543)
Positive adjustment (Vendor consumed more but you consumed
less in SAP and subsequently you added further component consumption in SAP)
Credit
- Raw Material Inventory (H)
Debit
- Vendor Subcontracting Charges (S)
Thanks
DD -
Hi
1. If you require clearing between the customer and vendor, the following requirements must be met:
u2022 The customer number must have been entered in the corresponding vendor master record.
u2022 The vendor number must have been entered in the corresponding customer master record.
u2022 The fields "Clrg with vend." or "Clrg with cust." must have been selected in both master records.
Where we have to select The fields "Clrg with vend." or "Clrg with cust." must have been selected in both master records.
2. If I need to change requirement date in PO or in scheduling agreement what is the T code and what is the procedure pls .
Thanks In AdvanceHi,
Movement type 121 is used for GR Subsequent adjustment for Subcontracting PO.
Thanks,
Manish -
CONSOLIDATED LIST OF A MATERIAL
Dear all,
I want a transaction in MM for below scenario.
My requiremnet is i hev a matcodes say 2000021569,2000021748,2000057811.....etc now i want list report like below
mat code total order qty total rcvd qty bal recvd qty total issued qty avl qty
(all pos in a plant) (all pos in a plant) (all pos in a plant)
2000021569 ??? ??? ??? ??? ???
2000021748 ??? ??? ??? ??? ???
2000057811 ??? ??? ??? ??? ???
also i want movement type detailed meanings (long text) ,it means how we know a movement to where use.Hi
There are different reports
MB52- Wareshouse stock
MB5B- stock on posting date
MC.9 - Stock
MC.A - Receipts/Issues
MC.B - Inventory Turnover
Plant - wise:MC.1 - Stock
MC.2 - Receipts/Issues
MC.3 - Inventory Turnover
Mvt types and their signifinace
101 Goods receipt for purchase order or order
InGoods receipt for subcontract order: at goods receipt, the consumption of the components is posted at the same time (see movement type 543)
Goods receipt for stock transport order: at goods receipt the transported quantity is posted in the receiving plant from stock in transit into unrestricted-use stock (stock in quality inspection or blocked stock).
103 Goods receipt for purchase order into GR blocked stock
105 Release from GR blocked stock for purchase order
107 Goods receipt to valuated GR blocked stock
109 Goods receipt from valuated GR blocked stock
This goods movement corresponds to a non-valuated movement type 105.
121 Subsequent adjustment for subcontracting
Movement type 121 does not have a reversal movement type.
Possible special stock indicators:
O, E, Q
122 Return delivery to supplier or to production
Using movement type 122, you can distinguish real return deliveries for a purchase order or order from cancellations (102).
In the standard version, you must enter a reason for the return delivery if you are using movement type 122. This enables you to carry out evaluations for return deliveries.
123 Reversal of return delivery
If you returned a goods receipt using movement type 122, you can reverse the return delivery using movement type 123. This movement type has the same effects as movement type 101.
124 Return delivery to vendor from GR blocked stock
Using movement type 124, you can return a goods receipt to GR blocked stock ( 103).
Movement type 124 has the same effects as movement type 104.
Possible special stock indicators:
K, O, E, Q
125 Return delivery from GR blocked stock - reversal
If you returned a goods receipt to GR blocked stock using movement type 124, you can reverse the return delivery using movement type 125.
Movement type 125 has the same effects as movement type 103.
Possible special stock indicators:
K, O, E, Q
131 Goods receipt for run schedule header
This movement type cannot be entered manually. It is generated automatically at notification of goods receipt for a run schedule header.
141 Goods receipt for subsequent adjustment for active ingredient
161 Return for purchase order
If a purchase order item is marked as a returns item, the returns to vendor are posted using movement type 161 when the goods receipt for purchase order ( 101) is posted.
Movement type 161 has the same effects as movement type 122.
201 Goods issue for a cost center
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K: Goods withdrawal from consignment stock
P: Goods withdrawal from the pipeline
If you have withdrawals from consignment stock and from pipeline, payables to suppliers ensue.
221 Goods issue for a project
The goods can only be withdrawn from unrestricted-use stock.
231 Goods issue for a customer order (without Shipping)
241 Goods issue for an asset
251 Goods issue for sales (without customer order)
261 Goods issue for an order
281 Goods issue for a network
291 Goods issue for any arbitrary account assignment
With this movement type, all account assignment fields are ready for input. You can assign the movement to any arbitrary
301 Transfer posting plant to plant in one step
303 Transfer posting plant to plant in two steps - removal from storage
305 Transfer posting plant to plant in two steps - placement in storage
309 Transfer posting material to material
311 Transfer posting storage location to storage location in one step
313 Stock transfer storage location to storage location in two steps - removal from storage
315 Transfer posting storage location to storage location in two steps - placement in storage
317 Putting together a structured material from its constituent components (Retail)
319 Splitting up structured material into components (Retail)
321 Transfer posting stock in quality inspection - unrestricted-use stock
323 Transfer posting storage location to storage location - stock in quality inspection
325 Transfer posting storage location to storage location - blocked stock
331 Withdrawal of sample from stock in quality inspection
The sample is destructive, that is, the withdrawal has the same effects as scrapping.
Possible special stock indicators:
E, K, Q, V, W
333 Withdrawal of sample from unrestricted-use stock
The sample is destructive, that is, the withdrawal has the same effects as scrapping.
Possible special stock indicators:
E, K, Q, V, W
335 Withdrawal of sample from blocked stock
The sample is destructive, that is, the withdrawal has the same effects as scrapping.
Possible special stock indicators:
E, K, Q
340 Revaluation of batch
341 Change in status of a batch (available to unavailable)
343 Transfer posting blocked stock - unrestricted-use stock
The quantity is transferred from blocked stock to unrestricted-use stock. You can also post the quantity to another storage location.
Possible special stock indicators:
E, K, Q
349 Transfer posting from blocked stock to stock in quality inspection
351 Goods issue for a stock transport order (without Shipping)
411 Transfer posting of special stocks E, K, and Q to company's own stock
413 Transfer posting to sales order stock
415 Transfer posting to project stock
You can use this movement type to carry out a transfer posting from your own unrestricted-use stock, consignment stock, and other project stock to a project stock.
Possible special stock indicators:
E, K, Q
441 Transfer posting non-tied to tied empties
451 Returns from customer (without Shipping)
Using movement type 451, you post customer returns without a returns delivery in Shipping into blocked stock returns.
Possible special stock indicators:
None
See also: 453, 651, 653
453 Transfer posting blocked stock returns to unrestricted-use stock
The quantity is transferred from blocked stock returns to unrestricted-use stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
455 Transfer posting storage location to storage location - blocked stock returns
The quantity is transferred from blocked stock returns of the issuing storage location to blocked stock returns of the receiving storage location.
Possible special stock indicators:
None
457 Transfer posting blocked stock returns to quality inspection stock
The quantity is transferred from blocked stock returns to quality inspection stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
459 Transfer posting blocked stock returns to blocked stock
The quantity is transferred from blocked stock returns to blocked stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
501 Goods receipt without purchase order - unrestricted-use stock
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
For a goods receipt for purchase order ( 101), the receipt of returnable transport packaging can be entered using movement type 501 and special stock indicator M.
Possible special stock indicators:
E, K, M, Q
503 Goods receipt without purchase order - stock in quality inspection
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Possible special stock indicators:
E, K, Q
505 Goods receipt without purchase order - blocked stock
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Possible special stock indicators:
E, K, Q
511 Free-of-charge delivery from vendor
The quantity is posted to unrestricted-use stock. If there is a material with moving average price, the moving average price is reduced accordingly.
Possible special stock indicators:
None
521 Goods receipt without order - unrestricted-use stock
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
523 Goods receipt without order - stock in quality inspection
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
525 Goods receipt without order - blocked stock
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with 531 (instead of 261). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as an 'other goods receipt'.
Possible special stock indicators:
E, Q
See also: 545 and 581
541 Transfer posting unrestricted-use stock - stock of material provided to vendor
543 Consumption from stock of material provided to vendor
545 Goods receipt from by-product from subcontracting
551 Scrapping from unrestricted-use stock
Possible special stock indicators:
E, K, O, Q, V, W
553 Scrapping from stock in quality inspection
Possible special stock indicators:
E, K, O, Q, V, W
555 Scrapping from blocked stock
Possible special stock indicators:
E, K, Q
557 Issue from stock in transit (adjustment posting)
561 Initial entry of stock - unrestricted-use stock
563 Initial entry of stock - quality inspection
565 Initial entry of stock - blocked stock
571 Goods receipt for assembly order to unrestricted-use
573 Goods receipt for assembly order to quality inspection
575 Goods receipt for assembly order to blocked stock
581 Goods receipt of a by-product from the network
601 Goods issue for delivery (Shipping)
603 Goods issue for stock transport order (Shipping) with additional
item
621 Transfer posting unrestricted-use - returnable packaging (Shipping)
The quantity is transferred from unrestricted-use stock to the returnable packaging stock at customer.
Possible special stock indicators:
none
623 Goods issue from returnable packaging stock at customer (Shipping)
This quantity is withdrawn from unrestricted-use returnable packaging stock at the customer.
Possible special stock indicators:
V
631 Transfer posting unrestricted use - customer consignment stock (Shipping)
The quantity is transferred from unrestricted-use stock to consignment stock at customer .
Possible special stock indicators:
E, Q
633 Goods issue from customer consignment (Shipping)
The quantity is withdrawn from unrestricted-use consignment stock at the customer.
Possible special stock indicators:
W
641 Goods issue for a stock transport order (Shipping)
643 Goods issue for a cross-company stock transport order (Shipping)
645 Goods issue for a cross-company stock transport order in one step (Shipping)
647 Goods issue for a stock transport order in one step (Shipping)
651 Returns from customer (Shipping)
Using movement type 651, you post returns from a customer with a return delivery in Shipping to blocked stock returns.
Possible special stock indicators:
None
See also: 451, 453, 653
653 Returns from customer (Shipping) to unrestricted-use stock
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E, Q
See also: 451, 453, 651
655 Returns from customer (Shipping) to stock in quality inspection
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E, Q
See also: 451, 453, 651
657 Returns from customer (Shipping) to blocked stock
661 Returns to vendor via Shipping
As with movement type 502, a return delivery to the vendor is entered without reference to the purchase order, but the goods issue is posted via a delivery in Shipping.
Possible special stock indicators:
E
671 Return for stock transport order via Shipping
673 Return for cross-company stock transport order (Shipping)
675 Returns for cross-company stock transport order (Shipping) in one step
Possible special stock indicators:
K (Retail)
You can use the special stock indicator K only if you have activated the business function Retail (EA-RET).
See also: 645
677 Return for stock transport order in one step (Shipping)
701 Inventory differences in unrestricted-use stock (MM-IM)
703 Inventory differences in quality inspection stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
707 Inventory differences in blocked stock (MM-IM)
711 Inventory differences in unrestricted-use stock (LE-WM)
713 Inventory differences in quality inspection stock (LE-WM)
715 Inventory differences in blocked stock returns (LE-WM)
717 Inventory differences in blocked stock (LE-WM)
721 - Sales value receipt - not affecting margins (Retail)
731 - Sales value receipt - affecting margins (Retail) -
Friends
List the Movement Types used in SD. Could anyone just explain the movement type with some examples.
Will reward you.
ThanksHi,
Further information
Below you will find a short description of the standard movement types. The reversal movement type is the movement type + 1 (reversal of 101 = 102).
101 Goods receipt for purchase order or order
If the purchase order or order has not been assigned to an account, a stock type (unrestricted-use stock, stock in quality inspection, blocked stock) can be entered during goods receipt.
If the purchase order or order has been assigned to an account, the goods receipt is not posted to the warehouse, but to consumption.
In the case of non-valuated materials, the goods receipt is posted to the warehouse, although the purchase order has not been assigned to an account.
Possible special stock indicators:
K Goods receipt for purchase order to consignment stock
O Goods receipt for purchase order to stock of material provided to vendor
E GR for purchase order or order to sales order stock
Q GR for purchase order or order to project stock.
Goods receipt for
subcontract order: at goods receipt, the consumption of the components is posted at the same time (see movement type 543)
Goods receipt for
stock transport order: at goods receipt the transported quantity is posted in the receiving plant from stock in transit into unrestricted-use stock (stock in quality inspection or blocked stock).
103 Goods receipt for purchase order into GR blocked stock
You cannot receive goods into goods receipt blocked stock for stock transport orders.
Possible special stock indicators:
K, O, E, Q
105 Release from GR blocked stock for purchase order
Movement type 105 has the same effects as 101.
Possible special stock indicators:
K, O, E, Q
121 Subsequent adjustment for subcontracting
This movement type cannot be entered manually.
With a subsequent adjustment for a subcontract order it is possible to correct the consumption of components. In this case, the material produced by the supplier is credited with the excess consumption / under-consumption. For this reason, if there is a subsequent adjustment, an item is generated for the produced material using movement movement type 121.
Movement type 121 does not have a reversal movement type.
Possible special stock indicators:
O, E, Q
122 Return delivery to supplier or to production
Using movement type 122, you can distinguish real return deliveries for a purchase order or order from cancellations (102).
In the standard version, you must enter a reason for the return delivery if you are using movement type 122. This enables you to carry out evaluations for return deliveries.
The effects of movement type 122 correspond to a cancellation of movement type 101.
Possible special stock indicators:
K, O, E, Q
123 Reversal of return delivery
If you returned a goods receipt using movement type 122, you can reverse the return delivery using movement type 123. This movement type has the same effects as movement type 101.
Possible special stock indicators:
K, O, E, Q
124 Return delivery to vendor from GR blocked stock
Using movement type 124, you can return a goods receipt to GR blocked stock ( 103).
Movement type 124 has the same effects as movement type 104.
Possible special stock indicators:
K, O, E, Q
125 Return delivery from GR blocked stock - reversal
If you returned a goods receipt to GR blocked stock using movement type 124 , you can reverse the return delivery using movement type 125.
Movement type 125 has the same effects as movement type 103.
Possible special stock indicators:
K, O, E, Q
131 Goods receipt for run schedule header
This movement type cannot be entered manually. It is generated automatically at notification of goods receipt for a run schedule header.
Possible special stock indicators:
E, Q
141 Goods receipt for subsequent adjustment for active ingredient
This movement type cannot be entered manually. It is generated automatically upon subsequent adjustment for a proportion/product unit . Subsequent adjustment is necessary if the system finds that there has been excess consumption or under-consumption after a goods receipt posting.
Possible special stock indicators:
K, O, E, Q
161 Return for purchase order
If a purchase order item is marked as a returns item, the returns to vendor are posted using movement type 161 when the goods receipt for purchase order ( 101) is posted.
Movement type 161 has the same effects as movement type 122.
Possible special stock indicators:
K, O, E, Q
201 Goods issue for a cost center
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K: Goods withdrawal from consignment stock
P: Goods withdrawal from the pipeline
If you have withdrawals from consignment stock and from pipeline, payables to suppliers ensue.
221 Goods issue for a project
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K, Q
231 Goods issue for a customer order (without Shipping)
You use this movement type if you want to process the delivery without Shipping.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
E, K, Q
241 Goods issue for an asset
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K
251 Goods issue for sales (without customer order)
Use this movement type if you have not entered a customer order in SD. In the standard system, the movement is assigned to a cost center.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K
261 Goods issue for an order
This refers to all withdrawals for orders (for example, DS:GLOS.3526C388AFAB52B9E10000009B38F974>production orders, maintenance orders), with the exception of customer orders.
Possible special stock indicators:
E, K, P, Q, W
The goods issue can be posted manually in Inventory Management or automatically when an order is confirmed or via a delivery in Shipping.
281 Goods issue for a network
The goods can only be withdrawn from unrestricted-use stock.
The goods issue can also be posted via a delivery in Shipping.
Possible special stock indicators:
E, K, P, Q
291 Goods issue for any arbitrary account assignment
With this movement type, all account assignment fields are ready for input. You can assign the movement to any arbitrary account assignment object.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
E, K, P, Q
301 Transfer posting plant to plant in one step
The quantity is transferred from unrestricted-use stock in the issuing plant to unrestricted-use stock in the receiving plant.
Possible special stock indicators:
E, O, Q, V, W
303 Transfer posting plant to plant in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing plant tostock in transfer in the receiving plant.
For technical reasons, you cannot carry out transfer postings from plant to plant in two steps for split valuation materials.
Removal from storage can be posted with movement type 603 via Shipping.
Possible special stock indicators:
None
305 Transfer posting plant to plant in two steps - placement in storage
The quantity is posted from stock in transfer to unrestricted-use stock in the receiving plant. The movement is not valuated.
You can use movement type 605 in Shipping to post the goods receipt with reference to the delivery.
Possible special stock indicators:
None
309 Transfer posting material to material
The quantity is posted from unrestricted-use stock of the issuing material into unrestricted-use stock in the receiving material.
Prerequisite: both materials have the same stockkeeping unit.
Possible special stock indicators:
E, O, Q, V, W
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators:
E, K, M, Q
See also 321, 343, 349, and 455 for other stock types
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators:
None
315 Transfer posting storage location to storage location in two steps - placement in storage
In the receiving storage location, the quantity is transferred from the stock in transfer to the unrestricted-use stock.
Possible special stock indicators:
None
317 Creation of a structured material from constituent components (Retail)
A material split into its components using movement type 319 can be rejoined using movement type 317.
Movement type 317 has the same effect as a cancellation of movement type 319.
Possible special stock indicators:
None
319 Split structured material into components (Retail)
You can enter the splitting of a structured material manually using movement type 319.
You can configure Customizing so that a structured material (for example, aset, prepack, or display is automatically split into its components at goods receipt. The system posts the split using movement type 319. In this process, the BOM header material is posted and each of the component stocks are increased. You can also use this function if you use the Warehouse Management System (LE-WM).
Possible special stock indicators:
None
Example:
A box of the structured material S contains 3 pieces of the component K1 and 4 pieces of the component K2. The following material document items result after the material is split at goods receipt:
Qty Unit Material Movement type
1 box S 101 +
1 box S 319 -
4 piece K1 319 +
5 piece K2 319 +
321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
Possible special stock indicators:
E, K, O, Q, V, W
323 Transfer posting storage location to storage location - stock in quality inspection
The quantity is transferred from stock in quality inspection in the issuing storage location into stock in quality inspection in the receiving storage location.
Possible special stock indicators:
E, K, Q
325 Transfer posting storage location to storage location - blocked stock
The quantity is transferred from blocked stock in the issuing storage location into blocked stock in the receiving storage location.
Possible special stock indicators:
E, K, Q
331 Withdrawal of sample from stock in quality inspection
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q, V, W
333 Withdrawal of sample from unrestricted-use stock
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q, V, W
335 Withdrawal of sample from blocked stock
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q
340 Revaluation of batch
Using this movement type, you can change a batch's valuation type. The system automatically calls up this movement type when you want to revaluate a batch by choosing Logistics -> Central Functions -> Batch Management -> Batch -> Change (transaction code MSC2N). There is no reversal movement type.
Possible special stock indicators:
E, Q
341 Change in status of a batch (available to unavailable)
This goods movement is automatically created when there is a change in the status of a batch and it is also used to transfer the unrestricted-use stock into restricted-use stock.
Possible special stock indicators:
E, K, M, O, Q, V, W
343 Transfer posting blocked stock - unrestricted-use stock
The quantity is transferred from blocked stock to unrestricted-use stock. You can also post the quantity to another storage location.
Possible special stock indicators:
E, K, Q
349 Transfer posting from blocked stock to stock in quality inspection
The quantity is transferred from blocked stock to stock in quality inspection. Here you can transfer the quantity to another storage location.
Possible special stock indicators:
E, K, Q
351 Goods issue for a stock transport order (without Shipping)
The quantity is transferred from unrestricted-use stock in the issuing plant to stock in transit in the receiving plant.
Movement type 351 is only used if the goods issue is posted without a delivery in Shipping. A goods issue for a stock transport order with delivery in Shipping is posted using movement types 641, 643, 645, or 647.
The transfer posting is also possible for materials with split valuation.
The goods issue for a stock transport order takes place using movement type 101.
Possible special stock indicators:
E, Q
For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant.
411 Transfer posting of special stocks E, K, and Q to company's own stock
The quantity is transferred from unrestricted-use special stock E (sales order stock), unrestricted-use stock K ( consignment stock) and unrestricted-use special stock Q (project stock) to unrestricted-use storage location stock. The corresponding special stock indicator is required for this movement.
If you do not use the special stock indicator, the system uses this movement type and movement type 311.
For sales order stock, you can change the material number for this movement if you manage the material in your company's own stock under a different material number (for example, for configurable materials).
Consignment stock is transferred to valuated stock, thus resulting in a vendor liability.
413 Transfer posting to sales order stock
You can use this movement type to carry out a transfer posting from your own unrestricted-use stock, other sales order stock, consignment stock, and project stock to a sales order stock.
Possible special stock indicators:
E, K, Q
415 Transfer posting to project stock
You can use this movement type to carry out a transfer posting from your own unrestricted-use stock, consignment stock, and other project stock to a project stock.
Possible special stock indicators:
E, K, Q
441 Transfer posting non-tied to tied empties
Part of the stock of an "empties" material assigned to a full product is managed in the stock type "tied empties".
Empties stock not assigned to a full product forms part of the stock type "unrestricted-use".
Using movement type 441, you can make a transfer posting for an empties material from the stock type "unrestricted-use" to the stock type "tied empties". Movement type 442 reverses this transaction.
Example:
The full product "beer" has a stock of 15 cases. Part of the empties components "bottle" and "case" is tied empties stock.
Refer example in next page
Material unrestricted-use tied empties
Beer 15
Bottle 240 360
case 10 15
451 Returns from customer (without Shipping)
Using movement type 451, you post customer returns without a returns delivery in Shipping into blocked stock returns.
Possible special stock indicators:
None
See also: 453, 651, 653
453 Transfer posting blocked stock returns to unrestricted-use stock
The quantity is transferred from blocked stock returns to unrestricted-use stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
455 Transfer posting storage location to storage location - blocked stock returns
The quantity is transferred from blocked stock returns of the issuing storage location to blocked stock returns of the receiving storage location.
Possible special stock indicators:
None
457 Transfer posting blocked stock returns to quality inspection stock
The quantity is transferred from blocked stock returns to quality inspection stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
459 Transfer posting blocked stock returns to blocked stock
The quantity is transferred from blocked stock returns to blocked stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
501 Goods receipt without purchase order - unrestricted-use stock
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
For a goods receipt for purchase order (
101), the receipt of returnable transport packaging can be entered using movement type 501 and special stock indicator M.
Possible special stock indicators:
E, K, M, Q
503 Goods receipt without purchase order - stock in quality inspection
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Possible special stock indicators:
E, K, Q
505 Goods receipt without purchase order - blocked stock
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Possible special stock indicators:
E, K, Q
511 Free-of-charge delivery from vendor
The quantity is posted to unrestricted-use stock. If there is a material with moving average price, the moving average price is reduced accordingly.
Possible special stock indicators:
None
521 Goods receipt without order - unrestricted-use stock
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
523 Goods receipt without order - stock in quality inspection
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
525 Goods receipt without order - blocked stock
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with 531 (instead of 261 ). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as an 'other goods receipt'.
Possible special stock indicators:
E, Q
See also: 545 and 581
541 Transfer posting unrestricted-use stock - stock of material provided to vendor
With this movement type you provide the subcontractor with the components required for subcontract orders. The quantity is posted into unrestricted-use stock of material provided to vendor.
If there is a goods receipt for a subcontract order ( 101 ) consumption of components is posted from this stock.
The transfer posting can be posted via a delivery in Shipping.
Possible special stock indicators:
None
543 Consumption from stock of material provided to vendor
This movement cannot be entered manually.
The consumption of components for a subcontract order is posted using goods receipt for purchase order ( 101). It can be corrected by means of a subsequent adjustment.
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
Possible special stock indicators:
E, O, Q
545 Goods receipt from by-product from subcontracting
If a component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted to stock provided to vendor during goods receipt for purchase order or during the subsequent adjustment.
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
Possible special stock indicators:
E, O, Q
551 Scrapping from unrestricted-use stock
Possible special stock indicators:
E, K, O, Q, V, W
553 Scrapping from stock in quality inspection
Possible special stock indicators:
E, K, O, Q, V, W
555 Scrapping from blocked stock
Possible special stock indicators:
E, K, Q
561 Initial entry of stock - unrestricted-use stock
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, M, O, Q, V, W
563 Initial entry of stock - quality inspection
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, O, Q, V, W
565 Initial entry of stock - blocked stock
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, Q
571 Goods receipt for assembly order to unrestricted-use
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
573 Goods receipt for assembly order to quality inspection
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
575 Goods receipt for assembly order to blocked stock
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
581 Goods receipt of a by-product from the network
The goods receipt of a by-product usually refers to a network, but can be entered without reference.
If a component is entered with a negative quantity in the network, a reservation is created with 581 (instead of 281 ). The receipt of a by-product can be entered during the withdrawal for the network or as an 'other goods receipt'.
Possible special stock indicators:
E, Q
601 Goods issue for delivery (Shipping)
In Shipping, this movement type is created automatically with the Goods issue for delivery function.
The quantity is taken from unrestricted-use stock.
Possible special stock indicators:
E, K, Q
603 Goods issue for stock transport order (Shipping) with additional
item
If you issue goods for a stock transport order in Shipping using movement type 641, you can use this movement type to assign an extra item to the order.
The ordered material is transferred to the stock in transit of the receiving plant. The material for the additional item is transferred from unrestricted-use stock in the issuing plant to stock in transfer in the receiving plant.
You can also use this movement type without referencing a purchase order.
Possible special stock indicators:
None
See also: 303, 641
605 Goods receipt for a stock transport order (Shipping) with
additional item
You can use this movement type to transfer into unrestricted-use stock the material you posted into stock in transfer in the receiving plant using movement type 603. You post the goods movement with reference to the purchase order (if available) or the delivery.
Possible special stock indicators:
None
See also: 305 and 641
621 Transfer posting unrestricted-use - returnable packaging (Shipping)
The quantity is transferred from unrestricted-use stock to the returnable packaging stock at customer.
Possible special stock indicators:
none
623 Goods issue from returnable packaging stock at customer (Shipping)
This quantity is withdrawn from unrestricted-use returnable packaging stock at the customer.
Possible special stock indicators:
V
631 Transfer posting unrestricted use - customer consignment stock (Shipping)
The quantity is transferred from unrestricted-use stock to consignment stock at customer.
Possible special stock indicators:
E, Q
633 Goods issue from customer consignment (Shipping)
The quantity is withdrawn from unrestricted-use consignment stock at the customer.
Possible special stock indicators:
W
641 Goods issue for a stock transport order (Shipping)
The quantity is transferred using a delivery in Shipping from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
The goods receipt for the stock transport order takes place using movement type 101 and can, if required, refer to the purchase order or to the delivery. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 671.
Possible special stock indicators:
E, Q
For the special stock indicators E and Q and for purchase orders assigned to an account, you must ensure that the quantity is not posted to the stock in transit of the receiving plant.
See also: 351, 643, 671
643 Goods issue for a cross-company
stock transport order (Shipping)
It is used only for cross-company stock transport orders with SD billing and invoice. The quantity is withdrawn from the unrestricted-use stock of the issuing plant. No stock in transit is created here. In the second step, the goods receipt must be entered in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 673.
Possible special stock indicators:
E
See also: 351, 641, 673
645 Goods issue for a cross-company
stock transport order in one step (Shipping)
Unlike movement type 643 when a goods issue is posted using movement type 645, a goods receipt line is generated automatically 101). If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movment type 675.
Possible special stock indicators:
E
See also: 675
647 Goods issue for a stock transport order in one step
(Shipping)
Unlike movement type 641 when a goods issue is posted using movement type 647, a goods receipt line (movement type 101) is generated automatically in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 677.
Possible special stock indicators:
E, Q
See also: 677
651 Returns from customer (Shipping)
Using movement type 651, you post returns from a customer with a return delivery in Shipping to blocked stock returns.
Possible special stock indicators:
None
See also: 451, 453, 653
653 Returns from customer (Shipping) to unrestricted-use stock
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
655 Returns from customer (Shipping) to stock in quality inspection
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
657 Returns from customer (Shipping) to blocked stock
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
661 Returns to vendor via Shipping
As with movement type 502, a return delivery to the vendor is entered without reference to the purchase order, but the goods issue is posted via a delivery in Shipping.
Possible special stock indicators:
E
671 Returns for stock transport order via Shipping
If a purchase order item is marked as a returns item in a stock transport order using movement type 641 when a goods receipt for a stock transport order ( 101) is posted, the return is posted to stock in transit using movement type 161. When the return arrives, the issuing plant posts the goods receipt for the return using movement type 671. Movement type 671 (like movement types 352 and 642) reduces the receiving plant's stock in transit and increases the issuing plant's unrestricted-use stock.
Possible special stock indicators:
E, Q
673 Returns for cross-company stock transport order
(Shipping)
If you post a goods issue for a cross-company stock transport order with returns items using movement type 643 via Shipping, the returns are transferred to unrestricted-use stock in the issuing plant in a second step using movement type 673.
Possible special stock indicators:
None
See also: 643
675 Returns for cross-company stock transport order
(Shipping) in one step
If you use movement type 645 to post a goods issue for a cross-company stock transport order with returns items in one step, the returns are transferred to unrestricted-use stock in the issuing plant using movement type 161 in the receiving plant and movement type 675 in the issuing plant.
Possible special stock indicators:
None
See also: 645
677 Returns for stock transport order in one step (Shipping)
If you use movement type 647 to post a goods issue for a stock transport order with returns items in one step, the returns are transferred to unrestricted-use stock in the issuing plant using movement type 161 in the receiving plant and movement type 677 in the issuing plant.
Possible special stock indicators:
E, Q
See also: 647
701 Inventory differences in unrestricted-use stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators:
E, K, M, O, Q, V, W
703 Inventory differences in quality inspection stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators:
E, K, M, O, Q, V, W
707 Inventory differences in blocked stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators:
E, K, M, Q
711 Inventory differences in unrestricted-use stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
E, K, M, Q
713 Inventory differences in quality inspection stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
E, K, M, Q
715 Inventory differences in blocked stock returns (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
None
717 Inventory differences in blocked stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators: E, K, M, Q
721 - Sales value receipt - not affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (total sales price revaluation on the posting date).
Possible special stock indicators:
None
731 - Sales value receipt - affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (partial sales price revaluation on the posting date).
Possible special stock indicators:
None
Reward points if useful
Regards,
Amrish Purohit -
Movement types corrsponds to Inbound ,Outbound and Internal transaction
Hi,
Can anyone tell me the list of movement types corresponding to the Inbound,Outbound and for Internal Transaction.
for example: movement type 101 corresponds to Inbound transaction.
ThanksDear Bala,
This may help you.....
Below you will find a short description of the standard movement types. The cancellation movement type is the movement type + 1 (cancellation for 101 = 102).
101 Goods receipt for purchase order or order
If the purchase order or order has not been assigned to an account, a stock type (unrestricted-use stock, stock in quality inspection, blocked stock) can be entered during goods receipt.
If the purchase order or order has been assigned to an account, the goods receipt is not posted to the warehouse, but to consumption.
In the case of non-valuated materials, the goods receipt is posted to the warehouse, although the purchase order has not been assigned to an account.
Possible special stock indicators:
o K Goods receipt for purchase order to consignment stock
o O Goods receipt for purchase order to stock of material provided to vendor
o E GR for purchase order or order to
o sales order stock
o Q GR for purchase order or order to
o project stock.
Goods receipt for subcontract order : at goods receipt, the consumption of the components is posted at the same time (see movement type 543)
Goods receipt for
stock transport order : at goods receipt the transported quantity is posted in the receiving plant from stock in transit into unrestricted-use stock (or stock in quality inspection, blocked stock).
103 Goods receipt for purchase order into GR blocked stock
The GR blocked stock is not valuated.
You cannot receive goods into GR blocked stock for stock transport orders.
105 Release from GR blocked stock for purchase order
Movement type 105 has the same effects as 101.
121 Subsequent adjustment for subcontracting
This movement type cannot be entered manually.
With a subsequent adjustment for a subcontract order it is possible to correct the consumption of components. In this case, the material produced by the supplier is credited with the excess consumption / under-consumption. For this reason, if there is a subsequent adjustment, an item is generated for the produced material using movement movement type 121.
Movement type 121 does not have a reversal movement type.
122 Return delivery to supplier or to production
Using movement type 122, you can distinguish real return deliveries for a purchase order or order from cancellations (102).
In the standard version, you must enter a reason for the return delivery if you are using movement type 122. In this way, evaluations of return deliveries are possible.
The effects of movement type 122 correspond to a cancellation of movement type 101.
123 Reversal of return delivery
If you returned a goods receipt using movement type 122, you can reverse the return delivery using movement type 123.
Movement type 123 has the same effects as movement type 101.
124 Return delivery to vendor from GR blocked stock
Using movement type 124, you can return a goods receipt to GR blocked stock (103).
Movement type 124 has the same effects as movement type 104.
125 Return delivery from GR blocked stock - reversal
If you returned a goods receipt to GR blocked stock using movement type 124, you can reverse the return delivery using movement type 125.
Movement type 125 has the same effects as movement type 103.
131 Goods receipt for run schedule header
This movement cannot be entered manually. It is generated automatically at notification of goods receipt for a run schedule header.
Possible special stock indicators: E und Q
161 Return for purchase order
If a purchase order item is marked as a returns item, the returns to vendor are posted using movement type 161 when the goods receipt for purchase order is posted.
Movement type 161 has the same effects as movement type 122.
201 Goods receipt for a cost center
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
o K: Goods withdrawal from
o consignment stock
o P: Goods withdrawal from pipeline
If you have withdrawals from consignment stock and from pipeline, payables to suppliers ensue.
221 Goods issue for a project
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: K, Q
231 Goods issue for a customer order (without SD)
You use this movement type if you want to process the delivery without SD.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: E, K, Q
241 Goods issue for an asset
The goods can only be withdrawn from unrestricted-use stock.
Special stock indicator: K
251 Goods issue for sales (without customer order)
Use this movement type if you have not entered a customer order in SD. In the standard system, the movement is assigned to a cost center. kontiert.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: K
261 Goods issue for an order
This refers to all withdrawals for orders (for example, production order, maintenance order, except customer orders.
Possible special stock indicators: E, K, P, Q, W
The goods issue can be posted manually in Inventory Management or automatically when an order is confirmed or via an SD delivery.
281 Goods issue for a network
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: E, K, P, Q
The goods issue can also be posted via an SD delivery.
291 Goods issue for any arbitrary account assignment
With this movement type, all account assignment fields are ready for input. You can assign the movement to an arbitrary account assignment object.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: E, K, P, Q
301 Transfer posting plant to plant in one step
The quantity is transferred from unrestricted-use stock in the issuing plant to unrestricted-use stock in the receiving plant.
Possible special stock indicators: O, V, W
303 Transfer posting plant to plant in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing plant to stock in transfer in the receiving plant.
For technical reasons, you cannot carry out transfer postings from plant to plant in two steps for split-valuation materials.
Removal from storage can be posted via an SD delivery.
305 Transfer posting plant to plant in two steps - placement in storage
The quantity is posted from
stock in transfer to unrestricted-use stock in the receiving plant. The movement is not valuated.
You can enter the goods receipt with reference to the SD delivery.
309 Transfer posting material to material
The quantity is posted from unrestricted-use stock of the issuing material into unrestricted-use stock in the receiving material
Prerequisite: both materials have the same stockkeeping unit.
Possible special stock indicators: E, O, Q, V, W
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators: E, K, M, Q
See also 321, 343, 349, 455 for other stock types.
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
315 Transfer posting storage location to storage location in two steps - placement in storage
The quantity is transferred from the
stock in transfer to the unrestricted-use stock in the receiving storage location.
317 Creation of a structured material from constituent components (Retail)
A material split into its components using movement type 319 can be rejoined using movement type 317.
Movement type 317 has the same effect as a cancellation of movement type 319.
319 Split structured material into components (Retail)
You can enter the splitting of a structured material manually using movement type 319.
You can configure Customizing so that a structured material (for example, (z.B. set, prepack or display) is automatically split into its components at goods receipt. The system posts the split using movement type 319. In this process, the BOM header material is posted and each of the component stocks are increased. You can also use this function if you use the Warehouse Management System (WM).
Example:
A box of the structured material S contains 3 pieces of the component K1 and 4 pieces of the component K2. The following material document items result after the material is split at goods receipt:
Qty Unit Material Movement type
1 box S 101 +
1 box S 319 -
4 piece K1 319 +
5 piece K2 319 +
321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here it is possible to post the quantity to another storage location.
This movement type is not possible for QM-managed materials since the transfer posting for these materials takes place using the usage decision.
Possible special stock indicators: E, K, O, Q, V, W
323 Transfer posting storage location to storage location - stock in quality inspection
The quantity is transferred from stock in quality inspection in the issuing storage location into stock in quality inspection in the receiving storage location.
Mögliche Sonderbestandskennzeichen: E, K, Q
325 Transfer posting storage location to storage location - blocked stock
The quantity is transferred from blocked stock in the issuing storage location into blocked stock in the receiving storage location.
Possible special stock indicators: E, K, Q
331 Withdrawal of sample from stock in quality inspection
333 Withdrawal of sample from unrestricted-use stock
335 Withdrawal of sample from blocked stock
The sample is destructive, that is, the withdrawal has the same effects as scrapping.
Possible special stock indicators: E, K, Q, V, W
341 Change in status of a batch (available to not available)
This goods movement is automatically created when there is a change in the status of a batch and it is also used to transfer the unrestricted-use stock into restricted-use stock.
Possible special stock indicators: E, K, M, O, Q, V, W
343 Transfer posting blocked stock - unrestricted-use stock
349 Transfer posting blocked stock - stock in quality inspection
The quantity is transferred from blocked stock to unrestricted-use stock (343) or stock in quality inspection (349).
Here it is possible to transfer the quantity to another storage location.
Possible special stock indicators: E, K, Q
351 Goods issue for a stock transport order (without SD)
The quantity is transferred from unrestricted-use stock in the issuing plant to stock in transit in the receiving plant.
Movement type 351 is only used if the goods issue is posted without an SD delivery. A goods issue for a stock transport order with SD delivery is posted using movement type 641 or 643.
The transfer posting is also possible for materials valuated separately.
The goods issue for a stock transport order takes place using movement type 101.
Possible special stock indicators: E, Q
For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant.
401 Transfer of sales order stock into company's own stock
(no longer available as of Release 4.0C)
The quantity is transferred from unrestricted-use sales order stock (non-valuated) into unrestricted-use storage location stock (valuated). For this movement, a special stock indicator is not required.
It is possible to change the material number using this movement - if the material is managed in the company's own stock under a different material number (for example, for materials that can be configured).
403 Transfer of consignment stock to company's own stock
(no longer available as of Release 4.0C)
The quantity is transferred from unrestricted-use consignment stock into unrestricted-use storage location stock and thus taken into the valuated stock. This results in a payable for vendors. For this movement, a special stock indicator is not required.
405 Transfer of project stock to company's own stock
(no longer available as of Release 4.0C)
The quantity is transferred from unrestricted-use project stock to unrestricted-use storage location stock. A special stock indicator is not required for this movement.
411 Transfer of special stocks E, K, and Q to company's own stock
The quantity is transferred from unrestricted-use special stock E ( sales order stock ), unrestricted-use special stock K ( consignment stock) and unrestricted-use special stock Q ( project_stock ) to unrestricted-use storage location stock. The corresponding special stock indicator is required for this movement.
If you do not use the special stock indicator, the system uses this movement type and movement type 311.
For sales order stock, you can change the material number for this movement if you manage the material in your company's own stock under a different material number (for example, for configurable materials).
Consignment stock is transferred to valuated stock, thus resulting in a vendor liability.
441 Transfer posting non-tied to tied empties
Part of the stock of an "empties" material assigned to a full product is managed in the stock type "tied empties".
Empties stock not assigned to a full product forms part of the stock type "unrestricted-use".
Using movement type 441, you can make a transfer posting for an empties material from the stock type "unrestricted-use" to the stock type "tied empties". Movement type 442 reverses this transaction.
Example:
The full product "beer" has a stock of 15 cases. Part of the empties components "bottle" and "case" is tied empties stock.
Material unrestricted-use tied empties
Beer 15
Bottle 240 360
case 10 15
451 Returns from customers (without SD)
Using movement type 451, you post customer returns without an SD returns delivery into blocked stock returns . The blocked stock returns are not valuated.
No special stock indicator possible.
See also 453, 651, 653
453 Transfer posting blocked stock returns to unrestricted-use stock
457 Transfer posting blocked stock returns to quality inspection stock
459 Transfer posting blocked stock returns to blocked stock
The quantity is transferred from blocked stock returns to unrestricted-use stock (453), quality inspection stock (457) or blocked stock (459) and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
455 Transfer posting storage location to storage location - blocked stock returns
The quantity is transferred from blocked stock returns of the issuing storage location to blocked stock returns of the receiving storage location.
501 Goods receipt without purchase order - unrestricted-use stock
503 Goods receipt without purchase order - stock in qual.inspection
505 Goods receipt without purchase order - blocked stock
These movement types are used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Mögliche Sonderbestandskennzeichen: E, K, M, Q
Bei einem Wareneingang zur Bestellung (101) kann der Zugang von
Mehrwegtransportverpackung als zusätzliche Position mit 501 und Sonderbestandskennzeichen M erfaßt werden.
511 Free-of-charge delivery from vendor
The quantity is posted to unrestricted-use stock. If there is a material with moving average price, the moving average price is reduced accordingly.
521 Goods receipt without order - unrestricted-use stock
523 Goods receipt without order - stock in quality inspection
525 Goods receipt without order - blocked stock
The movement types are used for deliveries from production that are not based on a delivery.
Possible special stock indicators: E, Q
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with 531 (instead of 261). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as another type of goods receipt.
Possible special stock indicator: E, Q
See also: 545 and 581
541 Transfer posting unrestricted-use stock - stock of material provided to vendor
WIth the movement type you provide the subcontractor with the components required for subcontract orders . The quantity is posted into unrestricted-use stock of material provided to vendor.
If there is a goods receipt for a subcontract order (101), the consumption of components is posted from this stock.
Special stock indicator cannot be used.
The transfer posting can be posted via an SD delivery.
543 Consumption from stock of material provided to vendor
This movement cannot be entered manually.
The consumption of components for a subcontract order is posted using goods receipt for purchase order (101). It can be corrected by means of a subsequent adjustment.
Possible special stock indicators: E, Q.
For the special stock indicators E and Q, you must ensure that the quantity is not removed from the stock of material provided to vendor, but from the unrestricted-use sales order or project stock.
545 Goods receipt from by-product from subcontracting
If a component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted during goods receipt for purchase order or during the subsequent adjustment.
Possible special stock indicators: E, Q
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
551 Scrapping from unrestricted-use stock
553 Scrapping from stock in quality inspection
555 Scrapping from blocked stock
Possible special stock indicators: E, K, Q
561 Initial entry of stock - unrestricted-use stock
563 Initial entry of stock - quality inspection
564 Initial entry of stock - blocked stock
During initial entry of stock balances, you enter the physical warehouse stock frigures or the book inventory from your old system into the SAP System for productive operation. This data entry usually takes place by means of batch input.
Possible special stock indicators: E, K, M, O, Q, V, W (565: only E, K, Q)
571 Goods receipt for assembly order to unrestricted-use
573 Goods receipt for assembly order to quality inspection
575 Goods receipt for assembly order to blocked stock
This movement cannot be entered in Inventory Management, but only in repetitive manufacturing using the function "Goods receipt for sales order".
Possible special stock indicators: E, K, Q
581 Goods receipt of a by-product from the network
The goods receipt of a by-product usually refers to a network , but can be entered without reference.
If a component is entered with a negative quantity in the network, a reservation is created with 581 (instead of 261). The receipt of a by-product can be entered during the withdrawal for the network or as another type of goods receipt.
Possible special stock indicators: E, Q
601 Goods issue for delivery (SD)
This movement cannot be entered manually. It is created automatically in SD using the function "Goods issue for delivery".
The quantity is taken from unrestricted-use stock.
Possible special stock indicators: E, K, Q
621 Transfer posting unrestricted-use - returnable packaging (SD)
This movement is generated by SD.
The quantity is transferred from unrestricted-use stock to the returnable packaging stock at customer .
623 Goods issue from returnable packaging stock at customer(SD)
This movement is generated by SD.
This quantity is withdrawn from unrestricted-use returnable packaging stock at the customer.
631 Transfer posting unrestricted use - customer consignment stock (SD)
This movement is generated by SD.
The quantity is transferred from unrestricted-use stock to consignment stock at customer.
633 Goods issue from customer consignment (SD)
This movement is generated by SD.
The quantity is withdrawn from unrestricted-use consignment stock at the customer.
641 Goods issue for a stock transport order (SD)
This movement is generated by SD.
The quantity is transferred using an SD delivery from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
The goods receipt for the
stock transport order takes place using movement type 101 and can, if required, refer to the purchase order or to the delivery.
Possible special stock indicators: E, Q
For the special stock indicators E and Q and for purchase orders assigned to an account, you must ensure that the quantity is not posted to the stock in transit of the receiving plant.
See also: 351, 643
643 Goods issue for a cross-company stock transport order (SD)
This movement is generated by SD.
It is used only for cross-company stock transport orders with SD billing and invoice. The quantity is withdrawn from the unrestricted-use stock of the issuing plant. No stock in transit is created here. In the second step, the goods receipt must be entered.
Siehe auch: 351, 641
645 Goods issue for a cross-company stock transport order in one step
(SD)
This movement is generated by SD.
Unlike movement type 643, when a goods issue is posted using movement type 645, a goods receipt line is generated automatically.
647 Goods issue for a stock transport order in one step (SD)
This movement is generated by SD.
Unlike movement type 641, when a goods issue is posted using movement type 647, a goods receipt line (101) is generated automatically.
651 Returns from customer (SD)
This movement is generated by SD.
Using movement type 651, you post returns from a customer with the SD returns delivery to blocked stock returns . The blocked stock returns are not valuated.
Special stock indicators not possible.
See also: 451, 453, 653
653 Returns from customer (SD) to unrestricted-use stock
655 Returns from customer (SD) to stock in quality inspection
657 Returns from customer (SD) to blocked stock
These movements are generated by SD.
With these movement types you post returns from the customer with SD returns delivery directly to the valuated stock.
Possible special stock indicator: E
See also: 451, 453, 651
661 Returns to vendor via SD delivery
As with movement type 502, a return delivery to the vendor is entered without reference to the purchase order, but the goods issue is posted via an SD delivery.
671 Returns for stock transport order via SD delivery
If a purchase order item is marked as a returns item, when a goods receipt for a stock transport order (101) is posted, the return is posted to stock in transit using movement type 161. When the return arrives, the issuing plant posts the goods receipt for the return using movement type 671. Movement type 671 (like movement types 352 and 642) reduces the receiving plant's stock in transit and increases the the issuing plant's unrestricted-use stock.
701 through 708: Inventory differences in MM
These movements are generated automatically during inventory difference posting in Inventory Management.
711 through 718: Inventory differences in MM-WM
These movements are generated when you post the inventory differences from Warehouse Management to Inventory Management.
721 - Sales value receipt - not affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (total sales price revaluation on the posting date).
731 - Sales value receipt - affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (partial sales price revaluation on the posting date).
Regards
Ravi -
Tell me about the movement type of 121,141,142?
pls explain the difference among these three movement type,
thanks in advance.121 Subsequent adjustment for subcontracting
This movement type cannot be entered manually.
With a subsequent adjustment for a subcontract order it is possible to correct the consumption of components.
Suppose you have consumed during GR for a subcontracting orders say 3 kg of raw material instead of 5 kg which is known later can be adjusted through Subsequent adjustment entry. Enter the difference 2 kg in the subsequent adjustment and save.
141 Goods receipt for subsequent adjustment for active ingredient
This movement type cannot be entered manually. It is generated automatically upon subsequent adjustment for a proportion/product unit
This is also a same kind of adjustment as above where you have activated batch specific UOM.
Regards
Soundararajan M. -
Where are document ranges defined in SAP? Specifically I am looking for two:
1) Document Range for Goods Receipt from PO
2) Document Range for Good Receipt from Process Order.
Thank youHi,
You can define them in Transacion SNRO or in IMG under
Materials Management -> Inventory Management or Physical Inventory -> Number Assignment
In the standard system, the transaction/event types and number range intervals are preset for Inventory Management as follows:
Material documents for goods receipts
Number range interval from 5000000000 to 5999999999
This group contains the following transaction/event types:
- WE Goods receipts for purchase orders
- WF Goods receipts for production orders
- WO Subsequent adjustment of subcontract orders
- WW Subsequent adjustment of active ingredient materials
Hope this would help.
Regards,
Naveen. -
Diffrent Between Goods Receipt Transaction Code MB01 and MIGO?
Dear All
Could anyone please tell me different between goods receipt by MB01 and MIGO.
Should I choose MIGO or MB01.
Thank and Best Regards,
ThangHi,
It is better to use MIGO.
MIGO replaces all the conventional transactions for posting goods movements, whose transaction codes start with MB*.
You can use the transaction (MIGO) to post the following goods movements:
- Goods receipts from external procurement
- Goods receipts for orders
- 'Other' goods receipts
- Return deliveries and subsequent deliveries
- Goods issues
- Transfer postings and stock transfers
- Subsequent adjustment for subcontracting
The advantages this transaction brings
This transaction provides many advantages over the old transaction for posting goods movements, for example:
- You can maintain and display all the data on one screen. You can find all the information you need for an item without having to switch from screen to screen. You can just hide any detailed information you do not require.
- When you enter goods movements, the system does not issue any messages; before you post the goods movements, you can display all the messages at once.
- Instead of having to enter the same data every time you enter a new goods movement (for example, plant, storage location, or movement type), you enter the data you use most often only once via Settings -> Default values. The system then proposes this data every time you enter a goods movement.
- If you do not know the exact name of the material, plant, or storage location, you just enter part of the number or a description. The system then searches for and proposes the complete term for you.
How the screen is structured
The screen is split into three areas:
- Overview tree
You can show and hide this area via the Overview on/off pushbutton. The overview screen displays the last ten documents for orders, reservations, material documents or held data. You thereby always have an overview of the last activities you carried out.
- Header data
You can show and hide this area via the Open/close header data pushbutton.
- Detail data
You can show this area by clicking on the item for which you want to display detail data in the Line column of the item overview. You can hide the detail data again by choosing Close detail data.
Each time you call up the transaction, the screen is displayed as it was configured the last time you used it. -
CKMDUVMAT posting date restriction
Hi gurús.
We us succesfullly CKMDUVMAT but we want to find the way to post adjustments done in any date of the period in all consumptions ot the same period.
We want to know if is possible to post this stocks adjustment to subcontracting consumptions and so on, and not only in order consumption.
Thanks in advanced for your helpHi
When you do the PIV (physical inv verification) difference to the Cost center - That acts as a trigger for CKMDUVMAT...
So, if you run CKMDUVMAT for the complete period together - It would post the Total PIV Difference of that period to the prod orders whereevr that material has been used...
You can use BADI CKMLDUVN_CHOOSE_RECV in order to change the logic to determine the Receivers for the posting of PIV Difference
Refer Note 996310 - Documentation BAdI CKMLDUVN_CHOOSE_RECV...
br, Ajay M
Maybe you are looking for
-
HP Color LaserJet Pro MFP M177fw screen frozen on hp logo and energy star icon
My HP Color LaserJet Pro MFP M177fw screen is frozen on hp logo and energy star icon. It has only printed the test page, and will not print otherwise. I have tried unplugging for 60 seconds, and even uninstalled it and reinstalled it with the lates
-
Windows vista not recognizing internet on my mac
I just recently installed boot camp and windows vista. Windows opens fine and seems everything is okay but it does not see my wifi (or any other network for that matter). I plugged in an Ethernet cable to my modem and it doesn't recognize that either
-
Forms demo for Oracle developer Suite 10.1.2.0.2
Hello people, I have tried to follow the instructions for the form demo and have installed Oracle devleoper sute 10.1.2.0.2. In the instructions it instructs you to edit the %ORACLE_HOME%\forms\j2ee\formsapp\formsweb\WEB-INF\web.xml where %ORACLE_HOM
-
Does anyone know of any other software to sync BB with apple mac (OSX 10.5) other than pocketmac? PocketMac is pretty unreliable, and has crashed and failed to sync on just about every attempt. I have successfully managed to get my info on just once,
-
PO stuck with status Awaiting Approval
We have the following issue: for example a PO with 3 version (change 1, change 2 and active 3). when you display the PO in the portal you see the change 2 in status ... "Awaiting approval" but when you check the Approval table, it shows ... Approval