Adjustment layer bug - or is it just me?

Somebody please try this and tell me if it's a bug or just me ...
Create an adjustment layer over some video -- any video.
Add 2 effects to the Adj Layer: Fast Blur and Levels.
Set blurriness to 50. Set RGB White Input Level to 50.
Now you should see Blur and Levels applied. All good so far.
Now add some keyframes so the blurriness animates.
How's it going?
On my system, as soon as I try to animate 1 or more of the effects, they stop working entirely.
This appears to be a bug. Or am I missing something?
My workaround has been to use TWO separate Adj Layers on top of each other, but that is cumbersome and annoying.
If anyone else experiences this, please file a bug report so we can get this resolved!
Here's the link: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
You can just paste in the body of this post

I tried the approach you've outlined. I'm able to see the original effects on my clip as it plays, but the bluriness value doesn't animate. I also tried using Gaussian Blur. Same result. I tried changing the order of effects. Still didn't animate.
I haven't used adjustment layers too much, yet. I did use them on a project I finished last week, however. I never ran into this on that project since, in my case, I wanted to keep my effects on separate adjustment layers anyway.
But good to know there's another bug, or just the way it was built. Maybe it's a feature request.

Similar Messages

Adjustment Layer bugs

Hello,
I have a few problems using adjustment layers:
1. If footage beneath adjustment layer is scaled down, the effect of adjustment layer is also scaled down (see example)
(Sequence is PAL Widescreen, Footage - XDCAM EX 1080i scaled to 55%)
And it doesn't matter if I use 'sequence sized' or 'footage sized' Adjustment Layer.
The effect is always the same.
But if I stack two adjustment layers - effect of second one affects the whole frame.
Problem no. 2
I use "Levels" and "Gaussian or Fast Blur" on adjustment layer.
But if "Levels" are turned on, it cancels the effect of Blur.
Thanks in advance,
Tomas M.
P.S. Mercury Playback Engine Hardware accelerated (GeForce 570GTX)

OK Jim, I'll try to express myself more clearly (although Averdahl and TomZid2012 understood me)
Sequence is PAL widescreen.
Footage on [Video 1] is XDCAM EX 1080i. It is scaled to 55% to fit PAL.
If I add AL to [Video 2] with any effect (CC, Blur, Levels, it realy doesn't matter), then the footage is affected only
in smaller region (see my attachment - it shows the effect of Fast Color Corrector, cranked up).
But if I scale AL just a bit - then everything works fine and the whole frame is affected by AL.
The same thing happens even with stills (if they are scale down).
Averdahl says that it's already filled as bug. And you should be able to reproduce it from my previous (or this) post.
But if it helps - I can send you small project with footage.
Regarding blur - I know how "Repeat edge pixels" functions. And I know how to troubleshoot such things.
I'm not a novice. I've tried all possible combinations of blurs+levels.
But as I said - it happens randomly, so at the moment I can't reproduce this situation.

Hue/Saturation Adjustment Layer Bug in Photoshop CS6

I noticed that most of the time I cannot copy a Hue/Saturation adjustment layer in Photoshop CS6. (In about a third of all cases it works, in all others I have to create a new Hue/Saturation adjustment layer).
Hitting Command + J will cause my Mac to make an error sound.
Option + delete also doesn't work half the time.
Also: I cannot do a "Stamp visible" above a Hue/Saturation adjustment layer. Hitting Command + Option + Shift + E will bring another error sound.
I have to creat a new layer, and then create a stamp visible. But half the time this doesn't work, either. Hitting Command + Shift + N will give me another error sound.
I have to create a different adjustment layer, then an empty layer, and only then I can create a "stamp visible".
Only Hue/Saturation adjustment layers are affected by this - but it's a true hold-up.

What Mac? What version of OSX? That aside, your issue sounds too exotic to be a genuine bug. Sounds more like some specific combination of settings is preventing this. could be anything from blending tricks to color profiles...
Mylenium

CS6 Info Palette and Group Adjustment Layer Bug

The Photoshop CS6 Info Palette is not showing before and after in Grouped Adjustment Layers.
It only shows the after values on both sides of the Palette.
Has anyone seen this issue and found a way to correct it?
Interestingly, here at work we have two macs with the problem and two without the problem.
The two macs with this problem are:
Mac Pro
2 x 2.93 Ghz 6-Core intel Xeon
96 GB 1333 HZ DDR3 ECC
ATI Radeon HD 5770 1024 MB
OSX Lion 10.7.5
The two macs that work correctly are:
Mac Pro
2 x 3.06 Ghz 6-Core Intel Xeon
96 GB 1333 HZ DDR3 ECC
ATI Radeon HD 5870 1024 MB
OSX Lion 10.7.5
Does anyone know what might cause this problem?
A little frustrated by this.

I am also having this issue. It works on my MacBook, but not my iMac. The only difference I see is that my MacBook is running 13.0 Extended, but the problem iMac is running 13.0.4 Standard. On the problem computer I have tried logging in as a new user (clean prefs) and the issue still exists. I've tried changing profiles, preview and proof settings with no difference. I've also tried different eyedropper settings (current layer, all layers, etc) with no difference. If I drag the correction layer out of the group, the readings show correctly. If I move them back INTO the group, they only show the corrected values. Very odd.
Problem computer specs:
Photoshop CS6 Standard (13.0.4 x64)
iMac 21.5" 2.7GHz quad-core Intel Core i5
16 GB 1600MHz DDR3
NVIDIA GeForce GT 640M 512M
OSX Mountain Lion 10.8.3
Working computer specs:
Photoshop CS6 Extended (13.0 x64)
MacBook Pro 17-inch, Mid 2010 2.53 GHz Intel Core i5
8 GB 1067 MHz DDR3
NVIDIA GeForce GT 330M 512 MB
OSX Mountain Lion 10.8.2

Photoshop CS6 Action Player Bug Make Adjustment Layer Applied to all to be Clipped

On Oct. 11, 2010 I received the following from Adobe Support
Hi John,
This is to inform you that we have been able to reproduce the same {Photoshop Actions} behavior at our end.
So we have logged this issue with the Product Team and Engineering Team as Bug # 2737069. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/.
You may also log this issue directly with our product teams, through the following Feature Request/Bug Form: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&samcap=EWQQL&promoid=EWQQL
I am closing case # 181675168, if you have any new information, please contact Adobe Technical Support referencing the case number so that we may re-open the support incident.
Thank you for choosing Adobe.
Thanks and Regards,
Rajdeep Kaur
Technical Support Consultant (Tier 2)
ADOBE Systems
I reopened the case for there was no fix Adobe contacted me and told me it would be fixed is some future release of Photoshop and once again case # 181675168 was closed over my objection.
I was vocal about Adobe poor excuse for support in forums. I then was contacted by Jeff Tranberry of Adobe he was asked to contact me by John Nack to see if he could change me. We exchanged some e-mails ending with Jeff writing unfortunately, you issues has been deemed low impact and has been deferred.
May 7, 2012 I called Adobe to find out if this bug was fixed in Photoshop for I did not want to buy CS6 if the Bug was not fixed. After about an hour on the phone talking to many Adobe employees including Adobe Support referenced case # 181675168 log as Bug # 2737069. I was told the bug was not in CS6. So I ordered CS6. FedX dropped off Today I installed it only to find the bug introduced is CS4 reported in CS5 is still in CS6.
Adobe when will you fix this bug # 2737069????

Case History
Case #0181636711 Assigned Bug # 2679265
Updated
Thursday, September 30, 2010 10:50:22 AM PDT
Opened
Thursday, June 10, 2010 8:21:19 PM PDT
Status
Withdrawn
Product
Photoshop CS5
Support contract
Adobe Support Program
Subject
CS5 Action Feature Bug
NOTES & RESPONSES
Notes from Customer
Thursday, June 10, 2010 8:21:19 PM PDT
CS5 has a bug recording and playing Actions that add Adjustments layers. Old actions recorded before CS5 and actions recorded with CS5 may or may not Play/Work correctly.
Before there was an Adjustment Panel all Adjustment Layers were added applied to all layers and you needed to clip them after the were added if you wanted it clipped. The new adjustment panel made it possible to add a adjustment layer clipped to the current layer. However a clipping parameter is not recorded by the action recorder just the type and setting are recorded.
When a make adjustment layer step is play it is either clipped or not depending on the state of the adjustment panel's clipping icon. If it not in the same state as it was when the action was recorded it will be add incorrectly. It would also be impossible to create an action that added some adjust layer clipped and others that are not.
I feel the is a serious bug which needs to be addressed. I believe the solution is simple and even old actions will also work.
Two patches are needed.
One in the Action recorder. If the step being recorded is make adjustment layer and the adjustment panel icon state is clip to layer this needs to be recorded in the action step record. If the layer is to be applied nothing extra needs to be recorded in the step record just leave it as is like actions prior to the adjustment panel.
The second patch in the Action Player. If the step that is about to execute is a make adjustment layer. The Player needs to save away the state of the adjustment panel icon. Then check the adjustment step record to see if it is to be clipped. If so set the adjustment panel icon to the clipping state else set it to the all layers state. Then do/call the add adjustment layer function/routine on return restore the adjustment panels icon from the saved state. Proceed to the next step.
I have been trying to report the bug for days. Please at least acknowledge you received my bug report.
Thanks
JJ
Browser: Other
Operating System: Windows XP
Has it ever worked? If so, what's changed? (provide comments in description field): Not Applicable
Same results with different file?: Not Applicable
Same results with different computer?: Not Applicable
Recent System Hardware or Software change?: Not Applicable
Auto responsce from Abobe will close case unless we here from you
Notes to Customer
Friday, June 11, 2010 5:04:44 PM PDT
Hi John,
Thank you for contacting Adobe Technical Support. My name is Saurabh. This is in regards to your concern posted on Adobe web support portal
regarding an issue with Adobe Photoshop CS5.
I understand the importance of your time in getting the issue resolved and we assure you that this will be taken care of with utmost importance. We appreciate your cooperation with us.
I would like to inform you that we are still researching on this issue. Once we find some new information, we will get back to you.
I apologize fore the inconvenience caused.
We are always happy to assist you however, in future if you face any problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
User to User Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
Have a nice day.
PLEASE NOTE:We will be waiting for your reply on this case. In case you are unable to respond we will be sending you a reminder on the 2nd day (From the day of our response to you) and then the case will be auto closed on 7th day assuming your issue is resolved. However, you can reopen your case by visiting our web support portal and we will be happy to assist you further.
Regards,
Saurabh Jain
Adobe Technical Support
Notes from Customer
Friday, June 11, 2010 6:01:35 PM PDT
I consulted your knowledge base and I called customer support. This bug has not been listed. Custom support had me fill out a bug report at https://www.adobe.com/cfusion/mmform/index.cfm? name=wishform which I did but that was not even acknowledged. I demonstrated the bug to customer support by sharing my screen.
As for you forums for some reason the forum web site states my Adobe ID is disabled so I can not append or start a thread there id screen name jjmack. I created a new Adobe ID yesterday [email protected] that to seems to be disabled or I can not come up with any screen name the is availably I have tried many. Every simple or outlandish name I have entered generates the same message screen name not available. I'm at my wits end I've been using Photoshop since Photoshop version 3. Over the years it seems to get harder and harder to communicate with Adobe....
Notes to Customer
Saturday, June 12, 2010 1:58:07 PM PDT
Dear John,
Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
As this issue would require support from a senior level and hence I am forwarding your case to the next level of support for extensive research and to find a resolution for the problem at hand. I'll get back to you once we receive a reply from the concerned department.
Please note that the expected turnaround time for resolution to this case from next level of support is 5 business days. I apologize for any inconvenience caused.
We are always happy to assist you however, in future if you face any technical problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support. Have a nice day.
Regards,
Saurabh Jain
Adobe Technical Support
Notes from Customer
Tuesday, June 15, 2010 12:03:49 PM PDT
simpler then I first thought. Upon more investigation this is what I see.
I skipped CS4 and when I installed CS5 I discovered a nasty bug had been introduced is Photoshop's Action facility most likely in CS4.
Action that add adjustment Layers clipped to the current layer that step is recorded Make adjustment layer with Clip.
Action that add adjustment Layers not clipped Step records as Make adjustment layer.
When a step Make adjustment layer with Clip is played back that is what Photoshop does.
When a step Make adjustment layer is played back what Photoshop does is look at the adjustment panel clipping icon state and and if it is clip to current layer Photoshop does clip the adjustment layer to the current when is should be applied to all.
Many of the actions I have created add adjustment layer applied to all then later clip them to the current layer. These actions generate an error message if the Adjustment panel clipping icon is set to clip. Because the layer get added clipped clipping it is not available. The strange thing is the layer is clipped the way I wanted it to be. But actions I recorded where I want the adjustment to apply to all are clipped and the is no error message just wrong results.
Notes from Customer
Thursday, June 17, 2010 1:00:02 PM PDT
I was told 24 hours to fix my ID. I kept myself logon this machine.now I can not even logon.
Notes from Customer
Friday, June 18, 2010 1:31:42 PM PDT
My user ID is now operational again after I requested an password e-mail so I could reset my password. When I received the e-mail I was able to set my accounts password and once again participate in Adobe's forums.
The is still no change in the status of my bug report. I would like to be able to play actions and know the will work the way there were recorded.
Notes from Customer
Saturday, June 19, 2010 6:56:24 AM PDT
Create a one step action that add an adjustment layer that applies to all layers.
Play that action with the icon in the adjustment panel is set to apply to all layers. Change the status of that icon to clip to layer and play the action again.
You will find the first adjustment layer was added correctly apply to all layers like it was recorded the second adjustment was added clipped to layer when it should be applied to all...
Notes to Customer
Thursday, July 1, 2010 9:53:35 AM PDT
Dear John,
Thank you for contacting Adobe Technical Support. My name is sauarbh. This is in regards to your concern posted on Adobe web support portal regarding an issue with Adobe Photoshop CS5.
I understand the importance of your time in getting the issue resolved and we assure you that this will be taken care of with utmost importance. We appreciate your cooperation with us.
As your issue demands a real time interaction, so we are arranging a call back for you.
Please provide the below mentioned information so that our call back team can contact you to resolve your issue:-
1. Your Preferred Day to attend the call
2. Your Preferred Time to attend the call
3. Your Time Zone
4 Your Phone Number
The callback team works from 10 AM to 7 PM PST.
Kindly revert to us with the above stated information so that our call back team can contact you within 24-48 working hours.
Please note :- Our Call Back team works Monday through Friday.
The callback team works from 10 AM to 7 PM PST.
Regards,
Sauarbh Jain
Adobe Technical Support
Notes from Customer
Thursday, July 1, 2010 10:10:44 AM PDT
Please provide the below mentioned information so that our call back team can contact you to resolve your issue:-
1. Your Preferred Day to attend the call
Mon through Friday
2. Your Preferred Time to attend the call
1 PM to 10 PM any time
3. Your Time Zone
Eastern USA Time
4 Your Phone Number
845-xxx-xxxx
Notes from Customer
Friday, July 2, 2010 8:43:30 PM PDT
July 2 Adobe support called me once again they share my display and I demonstrated the bug for a second time. This time the stated they were recording my demo. After I demonstrated the bug they put me on hold for a while. Upon returning they informed me that there was still no circumvention or fix for this problem. They wanted to know if I was at the latest software level they were still sharing my display so I did a Photoshop Help About Photoshop to show I had the latest update Photoshop version 12.0.1. Told me they were not capable of handling this problem and would have to refer this to senior technical support that they would determine if it was a bug. What a joke Adobe junior technical support can not even recognize a bug when it has been demonstrated to them on two occasions now and also received several case update from me. Adobe you need better support personal.
Notes to Customer
Thursday, August 5, 2010 2:39:56 PM PDT
Hi John ,
Thank you for getting back to us.
I would like to apologize for the delay in providing you a faster resolution to your issue and appreciate your patience with us.
I would like to inform you that your issue has been logged as bug so the workaround is obviously to make sure the clip to layer is not enabled prior to running any of these actions.Also my Product Team and Engineering Team are working on this issue you can use the work around as mentioned above.
This should resolve your issue. If it does, please let us know, however in case it does not; please revert with any new information that you might want to add which will help us in resolving your issue.
You can also try referring to our knowledge base and User to User forums by clicking on the following links:
Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
Have a nice day.
PLEASE NOTE: we will be waiting for your reply on this case. In case you are unable to respond we will be sending you a reminder on the 2nd day (From the day of our response to you) and then the case will be auto closed on 7th day assuming your issue is resolved. However, you can reopen your case by visiting our web support portal and we will be happy to assist you further.
Regards,
Adobe Technical Support
Notes from Customer
Sunday, August 8, 2010 9:26:50 PM PDT
Any work around does not solve my problem. Thousands have downloaded my actions. There is no way that I can contact them to make the aware of any work around. I can code around this bug but again I have no way to get the update to those that have downloaded my actions for they are free. All that is logged is the number of downloads. No registration is required so there is no way to contact the users that downloaded my actions. The problem will only be resolved when adobe updates Photoshop and fixes the problem.
Notes to Customer
Wednesday, August 11, 2010 1:58:23 PM PDT
Hi John ,
Thank you for getting back to us.
I would like to apologize for the delay in providing you a faster resolution to your issue and appreciate your patience with us.
I have logged this issue with my Product Team and Engineering Team as Bug #{2679265}. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/
I am closing case#{181636711}, if you have any new information, please contact my team within 14 days, with the details, so we may re-open the support incident.
You can also try referring to our knowledge base and User to User forums by clicking on the following links:
Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
Have a nice day.
Regards,
Adobe Technical Support
Notes from Customer
Thursday, August 12, 2010 9:13:56 PM PDT
This case should not be closed till there is a fix for this bug. How can Adobe Support close a bug report when Adobe acknowledges its a bug where Adobe Support does not provide a fix. Blowing smoke with statements like "if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site". Photoshop CS3 work correctly Adobe broke the Action Player in CS4 and its still broken is CS5. "if a fix is possible!"!!! Are you joking? What kind of support is that? Do you get a bonus for closing bug reports without fixing the bug? Does it make you look good inside Adobe. I can tell you from the outside there is a foul stench emulation from Adobe Technical Support.
Notes to Customer
Monday, August 16, 2010 2:30:22 PM PDT
Dear John ,
Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
This issue would require support from a senior level and hence I am forwarding your case to the next level of support for extensive research and to find a resolution for the problem at hand. I'll get back to you once we receive a reply from the concerned department.
Please note that the expected turnaround time for resolution to this case from next level of support is 5 business days. I apologize for any inconvenience caused.
We are always happy to assist you however, in future if you face any technical problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support. Have a nice day.
Regards,
Adobe Technical Support
Notes to Customer
Thursday, August 26, 2010 4:25:48 PM PDT
Dear John ,
Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
I would suggest you to please go to through the KB document to move actions from Photoshop CS4 to CS5 given below :
http://kb2.adobe.com/cps/860/cpsid_86020.html
Please make sure about the loaction of actions which you created or saved in Photoshop CS4, go to that location and make sure you have all the actions there.
Did it ever work in Photoshop CS5?
Try to make a copy of the action that he is trying to run, remove the 'Hide' command and re-record hide in PS CS5, put it into the action, and see if that works.
Or try making a short action along with Hide command . If this works, then something might have got changed between the version.
KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support. Have a nice day.
Regards,
Adobe Technical Support
Notes from Customer
Friday, August 27, 2010 8:15:11 PM PDT
This is the reply I received from adobe support you. I want this case open till it is resolved. Your trying everything to close it unresolved. Now your giving me instructions on how to migrate from CS4 which I don't have??? Please fix bug #{2679265}.
++++++++++From Adobe support+++++++++
I have logged this issue with my Product Team and Engineering Team as Bug #{2679265}. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/
I am closing case#{181636711}, if you have any new information, please contact my team within 14 days, with the details, so we may re-open the support incident.
+++++++++++++++++++++++++++++++++
Notes to Customer
Monday, August 30, 2010 5:14:11 PM PDT
Hi John ,
Thank you for replying back.
I would like to inform you that that we are working in techinical support department and fixing any issues or Bug with the product is done by the developers team. As they are already working on it and we don't have any update as how much time that gonna take. If you want we can have the case as open and as soon as there is any fix for the same, you will be getting the update on Adobe website.
I hope this will address your concern.
You can also try referring to our knowledge base and User to User forums by clicking on the following links:
Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
Have a nice day.
Regards,
Adobe Technical Support
Notes from Customer
Tuesday, August 31, 2010 7:51:16 PM PDT
Yes leave it open
Notes from Customer
Monday, September 6, 2010 5:57:14 AM PDT
Thank You
Adobe Support Call me and told me it would be fixed in the next release of Photoshop and asked me if they could close the case. I replyed IMO that is not the proper thing to do do what you want...
========================================================================================== ========================
As you can see Adobe marked the case
Status
Withdrawn
by Adobe over my objection.

Huge Bugs with Many Legs Still Living in Premiere Pro - (Border from Sharpening & Flickering from Adjustment Layer)

I haven't edited video in awhile. While working on a new project I've run into a bunch of what I suppose are well known issues in Premiere Pro CC 2014. It seems Adobe has know about these issues for some time, but that for some reason, nothing is being done about them. Here is my most recent experience with editing a video using PP:
1. Found that color correction tools in Premiere Pro for setting White Balance Suck for folks who don't edit video 8 hours a day.
Searched on web to find solution find that Adobe has no fix but random humans have found hack solution: White Balance in Premiere Pro CC on Vimeo
The dude shows you how to use the Cyroce Color Neutralizer plugin from After Effects - but sure enough the current version of the plugin that ships with AE CC 2014 doesn't work with premiere any more so you have to download the old version from dude's website here: http://www.sternfx.com/tutorials/136
Thanks to the DUDE!
2. Found out that adding an Adjustment layer can cause flickering in footage.
Searched on web to find solution find that Adobe has no fix but random humans have found hack solution: PP CC 2014 - adjustment layers flickering problem : Adobe Premiere Pro AND Re: image flickering from adjustment layer
Added mask to control flickering. More specifically, I turned each effect in the adjustment layer on and off until I found the particular effect that was causing the flickering. Then I created a mask in that effect which covered the entire frame. Mystically the flickering disappeared. Learned that if you make any changes to adjustment layer effects, flickering will return and you have to delete/recreate the mask once again. Ridiculous.
3. Thought all was good and that I could now peacefully continue to finish my project. I was wrong. Found that adding sharpening in adjustment layer causes a small border to form around the entire frame. The pixels seem faded or translucent or something.
Searched on web to find solution find that Adobe has no fix but random humans have found hack solution: Sharpening bug Premiere Pro - - Fourmedia
So now I've learned that the sharpening effect needs to go on it's own adjustment layer. Awesome.
Flickering returns because I made a change to adjustment layer 1. Re-mask. Sweet.
That's it. Pretty sure this post will help folks out, but man I am going to run out and give another NLE a shot. None of these operations should be this difficult. Makes me wonder if Adobe even attempts to use their own programs. I don't see how anyone could possibly let a huge tool like Premiere Pro suffer from these issues -- and for so long a period of time. Absolutely ridiculous. Adobe truly seems to be asleep at the wheel. This is some amateur crap here.

Thanks for this post. It would be cool (since Adobe doesn't seem to use their products) if there were more posts like this that I could read before I upgrade. I'm having the flickering w adjustment layer problem you mentioned in #2 - and this post is over month old! Aghh

Photoshop CC2014.2, Mac OS X: Bug with eyedropper and adjustment layer?

Hi,
I am constantly running into a weird behavior that I have a hard time not to classify as a bug.
Can someone please verify this and instruct me where to place a proper bug report?
How to repeat:
- Create a new document (RGB, white background)
- Use the brush and paint a desaturated colored area
- add a levels adjustment layer to make it lighter or add contrast
- go back to the paint layer
- set the eyedropper to only sample the active layer
- Use the eyedropper to sample the color
- Paint a new area
= The sampled color gets modified by the adjustment layer
- Turn off the adjustment layer
- redo sample and paint
= The adjustment layer will still affect the eyedropper tool
- Delete the adjustment layer
- redo sample and paint
= The adjustment layer will still affect the eyedropper tool even if it's removed!
- Restart photoshop and load the document
- redo sample and paint
= Now it works normally again.
There is one other way to get it back to normal and that is to reset the adjustment layer before deleting or turning it off.
Mac OS X Mavericks
Photoshop CC 2014.2

Bump. Am I really the only one that encounter this issue? Feeling lonely...

BUG- Alt clicking adjustment layer icons Not giving the opportunity to name the layer in CS6 Beta?

Using Windows 7 Ult, 64-bit:
I notice when I alt-click an adjustment layer icon, the layer automatically drops in with a default name--rather than giving me an opportunity to type a name for the A/L via the "new layer" dialog box. For example, in CS5, when you alt-click on the hue/saturation ajustment layer icon, you are given a dialog box in which you can name the layer, select clipping mask, blend mode, color select, etc--then the layer populates in the composition. In CS6 beta, when I hold the "alt" key and click the adjustment layer icon for hue/sat, I'm not getting the new layer dialog box at all. Is this a bug or a modifier key change in CS6?

It should still work from the layers panel. You have to hold the alt key before going to the adjustments menu at the bottom of the layers panel.
It doesn't seem to work from the adjustments panel unless you use the flyout menu and then you don't have to add the alt key to get the dialog.
Message was edited by: R_Kelly

Changing opacity in an adjustment layer to affect just one video track

Premiere Pro CS6
Hi,
I have a sequence of images in one video track that creates an animation and I've added an ultra key effect to remove the background of every image one by one (not sure if there was a better way to do this but anyway). Now I want to introduce this animation slowly with an opacity change but I can't seem to make it work. I've tried adding an adjustment layer and changing the opacity but this didn't work, I only want to change the opacity of this animation, not the other video track as well. So then I added a transform effect to the adjustment layer. I adjusted the opacity within this transform effect in this adjustment layer but I can't seem to make this work well either.
I've tried exporting the animation as a separate file so that I can bring it back to my project as one clip, but I'm a bit lost as to what kind of file to export it to. I tried an AAF file but that didn't load into my main project at all well and I had to force PPro to close.
Thanks.

Make your animation in its own sequence.
Then bring that sequence into the EDIT SEQUENCE. ( a Nest)

Adjustment Layer Crashes Premiere or Damages Project

Nearly every time I have tried to use an adjustment layer in Premiere Pro CS6, the application has hung if I tried to scrub through the video. Yesterday I decided to try placing an adjustmnet layer and only using the play function rather than scrubbing and it seemed to work alright. However, this morning premiere will no longer open the project file. Instead it give me the error message "The project could not be loaded, it may be damaged or contain outdated elements." This is an extremely heinous bug! Can anyone help or is this feature really just unusable?!!
Additionally, because I was so fastidious about saving, given the previous crashes, the only functioning autosave is 6 hours out of date!
HELP!

I use ALs a lot, and haven't yet seen this behavior.
Have you added any effects to the AL? Does scrubbing work OK without the AL?

Why are the adjustment layer controls grayed out?

I have used an adjustment layer in CS5 and when it was first used I could adjust everything. Now most of the controls have grayed out and whilst I can slide the sliders I can not type figures in nor use the radio buttons! Why has it locked me out? It has happened on a few images and with both Colour Balance and Hue and Saturation Layers.
The image above shows the problem with the top Colour Balance layer where I can not select Shadows or Highlights, nor type in figures for the sliders BUT I can slide them and change the tick on Preserve Luminosity! The basic image being edited is an 8-bit RGB file.
Adding a new adjustment layer (Colour Balance) on top of this one initially showed the same problem but after adding 3 more new adjustment layers suddenly eveything came back to fully working again - even the original problem layer!
This problem keeps happening with some of my images. It is happening on all 3 of our photoshop PC's, so it looks like a basic PS bug. Has anyone else seen this or know why it happens?

Thanks for the suggestion but that has no effect on them being grayed out or not. When this problem occurs it does not matter if the Mask is highlighted OR the adjustment itself.
But thanks anyway.
I am currently without the issue on the above example having removed the problem by adding additional adjustment layers and removing them again. Even if I now select just the adjustment mask I can still access ALL adjustment controls without problem.
But it will occur again as it has done over the last few months on a random basis. Hopefully someone else has seen this occur and found a solution?

I can't get photoshop to record a curve adjustment layer preset.

I am trying to record an action on a colleague's machine that has a custom curve setting but cant seem to get it to stick as a playable action step. He has one of the new trashcans (Mac Pro) with a system version of 10.9.4 and photoshop version of 2014.2.2. I am able to do it on my machine by recording the addition of the curve adjustment layer then selecting a pre-created curve preset. I am running Photoshop 2014.0.0. This does not work on his machine....quite maddening. Any ideas?

Did you set up the custom setting as a preset on all machines that will be using the action the loads the curves preset?
How did you record the Levels adjustment?
Did you add an adjustment layer or just use levels?
If you added an adjustment layer two step are recorded in newer versions of Photoshop. First step add the adjustment layer the second step setsl adjustment settings. The recording of the adjustment setting is delayed till you commit the adjustment by doing the next action step. How the add adjustment layer plays back can vary for Adobe introduced bugs in CS4 adding the Adjustment Panel they included two option that can change how Photoshop operates. And Actions and Scripts can not control or access these options.

Why are my eyedropper targets changing when I select my adjustment layer?

Consider this simple document with 2 layers and an adjustment layer:
Note the eyedropper targets. They read as expected:
Now, observe what happens when I click my adjustment layer (this is a new Levels adjustment that has NOT YET BEEN TOUCHED - so there should be NO CHANGE)
It doesn't matter whether the adjustment layer or its layer mask are selected, the results are the same.
Here are my eyedropper settings:
Proof Colors is off. I can't think of any other setting to play with.
This looks like a pretty huge bug to me, and it's not something I remember from earlier versions. Does anyone know what's going on?

Thanks for the added clarifications Noel. Can you perhaps explain to me how the behaviour of the color sampler in the info palette is actually desirable?
Let's look at my example again. When I am trying to make an adjustment and I'm looking at my color sampler targets, I _must_ have my adjustment layer selected. Target #1 is pointed over a white pixel. Regardless of which layer I have selected, that pixel is white. I can't imagine a scenario in which the readout should be anything other than 255,255,255. That's not a feature, that's a design mistake.
If I want to see, in the readout, the value of the background image's pixel, then I should hide the layer that contains that white shape. Then, that pixel is no longer white, and the color sampler readout should reflect that. Makes sense.
If you truly and honestly believe that users are interested in the color that is a result of compositing all the layers below (and including) the currently selected adjustment layer when they are plaing with the adjustment layer controls, then the UI must temporarily hide any layers above that color sampler as soon as I select the adjustment layer. This is the only correct UX design in that scenario - so that the color sampler once again reflects exactly what is "true" - namely the pixel color on the screen that it is sampling.
And if you re-read that last paragraph you will intuitively know that that would be crazy. I mean, there's no way that a user would want to have the UI hide any layers just because he's clicked on the Adjustment Layer - he probably wants to see the adjustment in the context of the entire composition. If he wanted to hide those other layers, he'd do it himself.
I urge you to reconsider this from the perspective of a real-world user and consider logging this as a bug. I just can't see any way that it isn't a mistake.

Can't click drop-down lists in curves adjustment layer

Odd behavior in released x64 version of CS6 for Windows: on my laptop (ASUS G73S with 1.5 gb nVidia GeForce video), when I crop an image, the drop-down menus in a curves adjustment layer become unclickable. But I can still access the RGB channels using the Alt + 3, 4 and 5 shortcuts. This behavior doesn't occur on my workstation, and if I don't crop the image, the drop-down menus work fine. I have the crop tool set to delete pixels. Also, if I apply curves directly (not with an adjustment layer), the dialog box works OK. And the other adjustment layers seem to be working, too. It's only the curves layer that's doing this.
Any ideas what this could be? I'm wondering if I should report it as a bug.

I've noticed that a few times on windows 8 32 bit, photoshop cs6 32 bit with 4gb of ram, a nVidia 8400 gs graphics card and open gl seems to work fine.
I guess that's probably some kind of glitch.
One way to get back the dropdown is to click on the Curves Display Options in the flyout menu and then just click OK in the dialog.
Added: It doesn't seem to happen if the crop tool is set to Classic Mode.
Message was edited by: R_Kelly

Cannot select tones in Color Balance adjustment layer

I'm not able to select the tone menu in the color balance tool. Is this a bug?

It was the tone pulldown menu when I used color balance as an adjustment layer. But it's now working for me. I just restarted the app.

Adjustment layer bug - or is it just me?

Similar Messages

Maybe you are looking for