Adjustment Layer staying white and won't apply its effects to layering video?

Adjustment Layer staying white and won't apply its effects to layering video?
I was using adjustment layers for color correcting and now my adjustment layer is just staying white and I've looked at so many forums and i can't find what I'm doing wrong...
I reset my preferences, I made a new project I'm clueless.

That is After Effects but ..try openig the composition window (TAB)
You are looking at the AL in Footage Window.

Similar Messages

When I try to add motion to a photo, the image just becomes white and won't display properly--what am I doing wrong?

Although the photo settings display properly and seem to indicate what I want will happen (the sliders work and I can set start and end times, etc.) as soon as I click the check box for "ken burns effect" the image becomes white and stays that way unless I undo my actions. Very frustrating. If accepted, it stays white and does not show the original image when the movie is played. What is going on here?

On the right hand side of the Photoshop window I used the Levels under "Add and adjustment". The tag for the photo in the upper left corner says IMG_3639 copy.psd@25% (Levels 1, Layer Mask/8)

The screen on my iPod touch is white and won't turn off and on?

I was charging my iPod and forgot about it after a couple days and now my screen is white and won't turn on and off and I held hold button and button on screen for 10 seconds and it didn't do anything. HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT4623 When I try to update my iPhone to iOS 7 using iTunes, I click update but a message pops up stating iTunes is up to date. The button on my iPhone to download and install is white and won't respond. How do I update to iOS 7?

When I try to update my iPhone to iOS 7 using iTunes, I click update but a message pops up stating iTunes is up to date. The button on my iPhone to download and install is white and won't respond. How do I update to iOS 7?

See Here > http://support.apple.com/kb/HT1808

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Unsharp Mask on Adjustment Layer crushing whites during fade?

I'm using Premiere CS6 with video footage from a Canon T2i. However, the issue appears regardless of the video source.
When I apply a Film Dissolve to a clip in the timeline, then add an Adjustment Layer with an Unsharp Mask on a track above the clip, the whites in the clip appear to become crushed over the length of the transition, while still fading to black. This does NOT happen if I use a Sharpen filter instead of an Unshark Mask, and if I apply the Unsharp Mask to the clip directly instead of using an Adjustment Layer. Fading with another clip looks normal as well, the whites only get crushed when fading to black.
If the problem had to do with the Film Dissolve processing in a linear color space, then I would expect similar results with the Sharpen filter. Likewise, if the problem had to do with the Unshark Mask, then I would expect to see the same thing when it is applied to the clip directly.
Any ideas? I appriciate the help!

Looks like a bug. Thanks. I'll escalate it.
Workaround looks good, so thanks for that too! Nice find.
PS:
LensFusion wrote: If the problem had to do with the Film Dissolve processing in a linear color space, then I would expect similar results with the Sharpen filter. Likewise, if the problem had to do with the Unshark Mask, then I would expect to see the same thing when it is applied to the clip directly.
I think it has to do with blend modes, but can't say for sure.

Help! the screen stays white and itunes doesnt recognize!

okay so this has never happened before, and i am really freaking out. so i was putting new videos in my ipod and then shut down my computer. i unplugged my ipod (no discontect button on) and and went upstairs to play my ipod on my speaker. i come back later and take it off my speaker, but the screen turned white and the light stayed on. i left it alone, and now it is still like that. the light has not gone off (but my light is always on because i set it like that) and the screen is white. itunes doesnt recognize it but my computer still makes that sound whenever i plug/unplug my ipod. can you tell me whats wrong and how to fix it?

i would re-boot the computers and ipod (hold the center button then put it on then off hold) and hook it up, if needed re-download itunes. Dont worry its happened before. Also make sure you have the newest ipod versions on the ipod 1.1.1 that should fix it. Also if you have the new version then re install it on you ipod. If not then call apple support

My sister's iPod touch got water in it. Now the screen is white and won't turn on. It looks like there's water in the front camera and in the screen.

My sister's iPod Touch got water in it. The screen is white and it won't turn off. There's water in the camera and it looks like there's actually droplets in the screen. I tried plugging it into the computer but iTunes wouldn't respond to it. My sister tried putting the iPod in rice (some remedy she heard of) but that just made it worse...

Do not turn on or charge until dry. Dry by placing the iPod in a sealed container of uncooked rice for at least as week and change the rice daily. Then
- Try:
iOS: Not responding or does not turn on
- If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour try the article again.
- If still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.
It "got worse" since it takes some time for the water to have an effect. The iPod may or may not work after it is dry.

HT201412 my ipod screen is white and won't do anything

playing the ipod and pressed the menu button and then the screen turned white and it won't do a thing!I got it on to charge now vut it's still not working

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My mac book pro screen has gone white and won't close down - any tips ?

Can someone help my screen on Mac book pro has gone white and I can,t turn off or close down

Hold the power button down for 10+ seconds.
Ciao.

Make a background layer stay flat, and not subject to 3D movement

Can somebody please remind me how to do this:
I have some video clips moving in 3D space.
I want to take an animation and put it on the botton so the video clips are flying over it,
but I don't want the animation subject to the Camera moves...I want it to stay flat on the background.
I thought this involved putting the animation in it's own group on the bottom and keeping it 2D,
but that's not working for me.
Any input would be appreciated.

I'm not adding the animation in FCP because when I do that, it results in jitter on the background when exported to an XDCAM disc and playing off an XDCAM deck. I realize there is something wrong along my export path for that to happen, but it does when I add it in FCP.
So, I've been exporting the clips over black, then making a second motion project, and just dropping the animation in, and the composite motion clip over that. That works and results in no jitter when it taken into FCP and then exported to XDCAM disc and played back.
I'm trying to avoid two passes in MOTION. I'd like to add the animation into the composite of the images.
What's happening is that either the animation is also affected by camera moves instead of staying flat, or it doesn't show up at all when added to the window.
Can you remind me, specifically, where you would create a group for the animation and where it would be in the group order and anything else about it I should know.
Thanks for your response.

I turned on my Mac and the screen stays white and nothing ever shows up., I turned on my Mac and the screen stays white and nothing ever shows up.

I have a 3 year old imac and turned it on the other day and the screen stayed gray and never moved away from it. Any suggestions on things to try?

Click on > Mac OS X: Gray screen appears during startup and follow the troubleshooting steps.

Apply an effect to all video layers below it?

Hey, all.
Before I ask, let me say that I'm a professional Avid editor cutting on Premiere Pro CS3.
The effect I'm trying to create is a distortion. Basically, I want to make it seem like I'm punching through from the back of the video. But the video in question is made up of four smaller clips lined up like a grid.
So far, I've put transparent video across the top (I will provide a link to a pic of a screen capture), and tried to apply a sphere distortion (just to check it out)....nothing happens. Anything I put on the transparent video (which in my mind should act like filler in the Avid), doesn't affect anything below it.
Soooo...what the point of the transparent video? And any ideas on how to make my punch? Thanks!
http://img262.imageshack.us/img262/8788/picture1gj6.png
-=Rob=-

[email protected] wrote:
> Raymond,
>
> You are correct--the are indeed AEX plug-ins. However, since Premiere
> went through its restructuring and gained its "Pro" designations, it
> gained the ability to use *most* AEX plug-ins within the PPro UI.
> Simply drop the .AEX file in C:\Program
> Files\Adobe\Common\Plug-ins\CS3\MediaCore\ folder (obviously, this is
> for Windows; OSX will differ) and relaunch PPro. It will now be
> available from the PPro interface... at least many plug-ins work this
> way.
Get outtta town! I did not know that.
> I just tested this particular setup (lens flare, followed by Unmult),
> and it worked as described, in CS3 on XP.
>
> FYI: This procedure is an easy way to get some extra effects in PPro
> that ordinarily are billed as AE only. A great example of this is the
> Cycore effects that come with AE. Simply copy the folder from your AE
> plug-ins folder into your PPro plug-ins folder, and get your effect
> on :)

I have three user accounts on one computer. On only one account when I when I check Help - About fire fox only one user account says apply update and won't apply. The other two work fine.

One of three user accounts on the same computer appears to not be updating to 8.0.1 correctly. One admin and one none admin user account says it is up-to-date. The other non-admin user account, under Help About Firefox says apply update, but won't.

As long as you installed MS Office into its default location (the top level /Applications folder) it will be available to all user accounts on the Mac.
As far as licensing is concerned you only have to enter the license code once, which you should do right after installing MS Office, in the same admin account you installed it from, by opening any one of the MS Office applications. There is no additional licensing required for additional user accounts on the same Mac.
Each user account is able to run the Office apps. The only thing you will have to do is go through an initial setup screen in each user account (but this setup does NOT involve entering any additional license codes).
You may have problems if you installed MS Office in a particular user account (i.e. NOT in the top level /Applications folder).

My volume won't work anymore. It stays gray and won't go anywhere. Help?

I've tried to turn up my volume but when I do it says it's turned all the way up but keeps a circle with line through it underneath the bar and it won't let me turn up or down the volume. It doesn't play anything, and in the bar up top it is grayed out, and still won't let me make it louder or anything.

Try quitting the app and then reopening. To quit an app: double click home buttom, then hold down the facetime app until it starts to jingel and a red circle should appear. Clicking that circle will quit the app! If it still does not work then try reseting the device itself!

Adjustment Layer staying white and won't apply its effects to layering video?

Similar Messages

Maybe you are looking for