Adjustment layers not editable?

I have just upgraded to CS4 and am trying to add an adjustment layer, but when I click on the icon at the bottom of the palette and select Hue / Saturation I don't get the actual adjustment any more.
All I get is the adjustment layer showing in the layers palette.
I can click on Edit Adjustment... BUT NOTHING HAPPENS. I don't get the adjustment dialogue.
I have tried adding an Adjustment Layer from the Layers menu, but I still miss out the dialog stage and end up with the adjustment in the layers palette but again no way to edit it.
Is there a new way to add adjustment layers?
Is there a new hidden preference somewhere?
I am using a Mac with OS 10.5.7 and a 2 x 2.8 Ghs Quad-Core Intel Xeon MacPro.
Any ideas?
C

Welcome to CS4. Check out the adjustments panel here: http://help.adobe.com/en_US/Photoshop/11.0/WS3B030337-01D1-45b4-A006-E3ECA67B14B9.html
There are some tricks to returning to CS3 behavior. I just use CS3 when I get fed up with the non-modal (or something) brilliance.

Similar Messages

Adjustment Layers Not Functioning

I have Photoshop CS6 and suddenly I am unable to use adjustment layers. I've been using Photoshop for over 15 years, and the procedure has always been the same; create an adjustment layer then click the circle on the left of that layer, and a dialog box appears where the curves, levels and such may be controlled. Clicking on this circle no longer produces the dialog box.

Thanks again Gene. In the past I've had to throw out the prefs file more than once but it's been so long I forgot that. I don't want to upgrade my OS because I've heard this and that about the higher systems. But what plugins would you recommend?
Not to pester you, though. If you don't want to respond I won't pursue it. Keep up your good work.
Mike
From: gener7 <[email protected]>
To: Tracey Redding <[email protected]>
Sent: Thursday, January 8, 2015 7:58 PM
Subject: Adjustment Layers Not Functioning
Adjustment Layers Not Functioning
created by gener7 in Photoshop General Discussion - View the full discussionWhat matters is you are back to Photoshopping. Corrupted Photoshop Preferences are a common problem, so if you are having problems with Photoshop and you haven't done anything like upgrading your OS or installing plug-ins, make a note of these reset instructions. Have a nice evening Gene If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7079581#7079581 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7079581#7079581 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Editing Adjustment Layers Not Working

Using Photoshop Elements 10. I am unable to edit an Adjustment Layer. When I doubleclick the layer thumbnail or click layer content options, nothing happens. This is the case with new files as well as files that had adjustment layers created with Photoshop Elements 6. Fill layers work ok, but adjustment layers such as Levels and Hue/Saturation won't work....need help desperately.
Thanks

Good evening. I am using PSE 11 Mac version and I am having the same issue as the original post. I am unable to edit adjustment layers. No problem with fill layers.
I have tried your solution, which worked on deleting the file, but PSE 11 is still not letting me do anything with the adjustment layers.
As an FYI, I am also unable to select any of the "Window" menu selections, such as "Actions", "Histogram", etc. I am attaching a quick screen capture to show the menue that I am talking about.
Any help with this is greatly appreciated. Thank you all.
Message was edited by: kabestudios

Adjustment layers not 'sticking' on animated GIFs

I'm trying to adjust brightness/contrast and saturation over about 30 layers on an animated GIF. Everything looks great until I do a save for web and click on the animate box. At that point, the color/changes drop off completely. It shows up fine when it's just the one layer being shown. And it seems to be showing up on all the layers when I'm in the main edit window. I keep looking and making sure I have the 'this adjustment affects all layers below,' and I do. I even tried saving a GIF with the other setting turned on and I got the same thing.
Anyway, I exported a few GIFs, thinking maybe the adjustment layers would kick in as it saved, but nope. Neither layer saved into the exported GIF.
I'm sure this is just a simple setting I'm missing, but I'm banging my head against the desk at this point. Any help would be greatly appreciated. Thank you!

Thanks! I'm still trying my best to sort out why the adjustment layers drop off when I go to animate the GIF ... BUT I did duplicate the adjustment layers -- one for each frame -- and then clicked on the adjustment layers and selected layer and merged them one at a time and it worked. It's still more tedious than I hoped, but not as tedious as trying to adjust each layer on its own and having to input the same exact settings for each layer.
I would still be interested in anyone else's take/advice on applying adjustments to all the layers in an image at the same time and having it cary through to 'save for web.' Animated GIFs are so simple in theory, but I'm finding them to be absolutely one of the most frustrating and tedious things to try and edit/create.

Adjustment Layers not working in Actions CC

I am attempting to use the actions panel to edit a large number of product shots quickly. I have disabled the generator, which was a possible solution I saw in another post, closed my photoshop, opened it up again and tried it on a new file. None of my adjustment layers do what I set them out to do, but they do show up as layers in my layers panel. The only part of the action that works is my smart sharpen. I created the actions in CC and I don't know where to go next.

Now that you disabled the generator plugin, you probably need to record the actions again, because having the generator plugin enabled, plays havoc on
recording actions. (some stuff is not properly recorded with the generator plugin enabled)

Adjustment layers not working in CMYK MODE?

Hi Guys
I have a photoshop issue and was wondering if you could shed any light on the matter?
When ever i set my document to CMYK mode, some of my adjustment layers become 'un-selectable' such as the Black & White, vibrance and the exposure adjustment layers?
They work fine in RGB mode but was curious if this was common place?
Any information woould be greatful

but surely the black and white one does? or am i wrong there?
It would seem you are.
You can still use Hue/Saturation as a work-around.
how do i go about finding that particular thread?
That’s no thread but a headline in the Help; personally I prefer to download the pdf:
http://help.adobe.com/en_US/photoshop/cs/using/index.html
I am working in cmyk as the poster i am producing is for print, so the document is put into that mode for that purpose.
If you are using/combining photographic images this approach may not be ideal and incurs the risk of overshooting the TAC.
On the other hand if you have lots of text, fine lines or other elements that are supposed to, for example, print in pure black working in CMYK would be called for.

Adjustment layers not opening mask anymore

On my laptop I choose an adjustment option and it creates a new layer and layer mask. On the imac it only creates the layer with the adjustment. I have to manually add the mask.
I can't find a preference or setting or anything to get the two to behave the same way.
Regards,
Kelly

Inconsistent from Photoshop UI as well as from Actions. And becase I know what will cause them to fail. I can create actions and scripts that I know will work no matter how they are set. The step will work the same way no matter which way the options are set.
For example disable add layer mask you wrote you have no problem doing that. Do a Ctrl+A (select all) then add an levels adjustment layer to the current layer. You will find that the levels adjustment layer is added with a layer mask. Photoshop will work that way in actions and from its UI. So I can record and add adjustment layer and know for sure a layer mask will be added no matter how a user set the fly-out option. I can also use Photoshop menu Layer>New Adjustment Layer>Type. And in its dialog I can Check use previous layer to create clipping mask. The Adjustment layer will be clipped no matter which way the fly-out option is set.
These options breakes Photoshop original design they are bad options and their implementation is poor. Actions and scripts can not set these options. Scripts can not find out how they are set either. You write Plug-ins do you add adjustment layers in any of them?
Without using these bugs automating adjustment layers is hit and miss. You would not know the state of the adjustment layer you would not know if you had to add a layer mask or modify or replace the existing mask. You would not know if the adjustment layer applied to all lower layer or just the previous layer.
Its a good thing you don't use such action for they could have problems....

Effects on adjustment layers not working in PPro CC 2014

I am trying to use an adjustment layer to add an effect to my entire project (about 3 minutes). When I add the adjustment layer and the effect, nothing happens. I can apply the effect directly to a clip and it works fine.
Am I missing something or is this a bug?
Thanks for the help,
Catherine

Mmmm.. maybe there is indeed an issue with the adjustment layer, I have a project that I opened up and wherever I have adjustment layers, they all show as black image...if I check off the effect, then i see my footage underneath.. but as soon as I add an effect (in this case, brightness and contrast + Tint), then it goes to black... changing the blend mode doesn't do anything either...

Adjustment Layers Not Transferring Properly into PR Pro CS4

Hi all,
Was hoping to get some help with a AE -> PR issue. I'm working in After Effects and Premiere Pro CS4. I have an AE project that has some footage with adjustment layers and some solids that I go ahead and save as a Premiere project. When I open up the saved PR project in Premiere and load the sequence, my adjustment layers and solids have all turned into a block of pure white and no longer retain any of the effects applied to them in AE.
Any ideas what may be casuing this and how it might be fixed? Thanks very much.

> I have forgotten exactly what will transfer from AE to PrPro, but that info is probably around this forum.
The code to import a project from After Effects into Premiere Pro (or vice versa) is the exact same code as that used to copy and paste between the two programs. Here's a page that describes exactly what comes across:
"Copy between After Effects and Premiere Pro"
Here's the important sentence:
"You cannot copy shape, text, camera, light, or adjustment layers to Adobe Premiere Pro."

Edit adjustment layers not working

When I add an adjustment layer, it adds the layer but I am unable to make any changes and there is no 'pop-up' box. I can rename the layer by clicking it but it doesn't open the editing box. It worked before the last Photoshop update 5 days ago.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/photoshop

Adjustment layers not working in CS4

I just installed Photoshop CS4 and I can create an adjustment layer, but the editing box for that particular adjustment layer does not come up. It works just fine in CS3 on the same computer. I have a G5 (non Intel). Any ideas why this is not working?
Thanks, Beth

Look at the Adjustments Panel.. new in CS4. Window > Adjustments
There are no dialog boxes anymore.

Adjustment layers not working CC

Hi all,
Maybe I am doing something wrong, but I am trying to get a solid adjustment fill layer to clip to the layer below it. I can get the little bent arrow and the layer it is clipped to is underlined, but the screen is still filled solid with the fill layer's color. It is not acting as expected and masking to the black lines of a black and white drawing, just filling the whole canvas with color.
I have tried resetting my pref files and tried it on another computer. I am fairly certain the issue is an ID10T error on my part.
Thanks so much,
Corey

There is no transparency/ mask channel anywhere in your setup, so I'm not sure what you expect. Linking a solid background layer with another layer - umm - leaves it solid at 100% opacity. You realyl need to watch a tutorial on how to do this the right way...
Mylenium

Why does PS Elements 9 Layer Mask and Adjustment Layers not function

Is there a compibility issue when using PS Elements Layers and Window

What happens when you try to use layers?

Adjustment Layers not working properly -PP 7.00.0 CC / Mac 10.8.4

I cant keyframe a blur on an adjustment layer in Premiere Pro CC 7.00.0 on a mac 10.8.4.
This seems to be an issue/bug.
the 'highest' keyframe setting seems to take precidence over the opther keyframes, (ignoring the other keyframes..)
when will this be fixed.. ??

Yep.. that did
thx

Adjustment layers effects not applying when flattening image or merging layers CS6

So about a week ago I noticed something changed with my adjustment layers. In an image I would make a selection and start using adjustment layers to edit that selection, and then once I was finished, I would merge the adjustment layers together so that I could erase outside areas where the effect was not intended. However, whenever I merged the layers, the effects would go away and the thumbnail preview by the layer title would become blank (gray and white transparent) as if there was not anything on the layer. I messed around and I reset Photoshop, and then I thought the layers were fixed. They were somewhat fixed, except I've started having trouble again. Now I'm having difficulty editing this one image i'm on. It's a portrait with a photoshop-created red mask going around eyes, and I used the dissolve layer effect on the original mask creation which was black at first. Then I selected that selection and made more layers editing the hue, saturation, brightness/contrast, and exposure.
I tried to save the image as a jpeg, and the effects were messed up. The hue and all other adjustment layers seemingly applied, except the dissolve effect does not show up at all. So I tried to fix it manually. I flattened the image first with intention to then save it as a jpeg, but as soon as I flattened the image, again the dissolve effect was not applied. Then I tried to merge the layers, and yet again, the dissolve effect was not showing up. It shows up fine in PSD form, something's wrong with the conversion process. Please don't be mean to me. I'm not great at photoshop, I'm not saying that I am or claiming to be a pro or anything I just want help from people who actually get it. I have CS6 and use a Macbook Pro.

I stopped even trying to read this append. For is seems very complex and overwhelmed my little mind. Please consider including some screen captures showing your Photoshop window with your document that your writing about open and the layer palette shows the structure of the document. For me examples and screen capture of the steps involves involved would be very helpful.

Adjustment layers not editable?

Similar Messages

Maybe you are looking for