Adjustment panel disappears in

I am new to CS4, upgraded from PSE8. WinXP Pro. I am going through "Classroom In A Book" and learning things I really like. Tonight, I start the program and hit Alt-Ctrl-Shift and reset everything. I open up Bridge and start on a RAW photo like I have been doing the last few days. I start with opening Histogram and then go to the Adjustment Panel. If I open LEVELS, I can use that function only as the Adjustment Panel disappears. After completing the task and hitting SAVE, there is no Adjustment Panel to be found anywhere. I have to close CS4 and reboot using the Alt-Ctrl-Shift command and then the Adjustment Panel reappears when I open a photo. I can not find this problem anywhere on the Adobe site...any ideas or HELP out there??? I appreciate anything!

Hi Wroger,
Your mistake is in "closing" the levels window. You are actually closing the adjustments palette.
When you have finished the levels adjustment and want to make another adjustment, just click on the little arrow on the bottom left hand corner of the adjustments panel, and all the other adjustments will be available.
Roger

Similar Messages

I've lost my adjust panel, how do I get it back?

I seem to have lost the "adjust panel" for editing photo's in IPhoto 5.0.4. I've tried to edit from both the library and in albums. This seems to have happened after a recent upgrade to 10.4.3 and shortly thereafter a memory upgrade from 512MB's to 1. GB and a warranty replacement of my super drive. Any ideas?
20" iMac Mac OS X (10.4.3)

Hi Mel,
It MIGHT be that you need to make your window larger so you can see it in the toolbar...or...look under the >> and see if it is there.
Lori

When I try to enter my Printer model to search for drivers on HP support site the input panel disappears . It was OK in previous Firefox versions but not in 18.

I tried to search for driver for one printer at HP web site. When you go on support page you are presented with 3 options. If you click on the first to search for drivers a panel is displayed that has input box to enter your printer model. When I click on that input box the panel disappears.

'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

Right click near to one of the other options e.g tone curve and a popup list will provid you with the option to display or hide the options. see image capture.

Lost BASIC section of adjustment panel in DEVELOP mode.

Editing my first image in Lr5, v7. Somehow I have lost the BASIC section of adjustment panel in the DEVELOP mode. This adjustment panel now starts at TONE CURVE, just under the TOOL STRIP. How can I get the BASIC section of the adjustment panel back???

Right-click on Tone Curve or any other tab and choose Basic again.
Or in develop Mode press Cmd+1 (Ctrl+1)

Highlights and Shadows Adjustment Panel

Hi
Since upgrading to 3.3.1 yesterday, I have lost the Advanced segment of the Highlights and Shadows adjustment panel.
It will show up on photos which had been previously edited using this segment, but not on photos which have not been edited.
Photos are on an external drive.
Any fixes?

See Kirby Krieger's Thread:
How to not miss that olde-tyme Highlights & Shadows 7-slider Brick
Basically you use an image, that still has the Version 3.2 Highlights & Shadows adjustments and create an adjustment preset (effect) from this image. Then you can use the advanced controls again for all images.
Regards
Léonie

Where is the ( curve ) option in the adjustment panel ,in photoshop elements 9

where is the ( curve ) option in the adjustment panel ,in photoshop element 9 , I cant seem to find the curve option ...

Irritatingly, it doesn't exist. You need to go to Enhance>Adjust Color>Adjust Color Curves for the PSE version of curves. You can add an adjustment layer with something like elements+ from simplephotoshop.com or grant's tools (http://www.elementsvillage.com/forums/showthread.php?t=51319), but it will still be limited to the combined RGB channel. If you use windows there's also the free easy filter smartcurve plug-in:
http://members.chello.at/easyfilter/curves.html

Tiny Levels Adjustment Panel histogram.

The histogram, in the Layers Adjustments Panel in E9, is now only 166 pixels wide. Since there are 256 levels in an 8 bit image about 1/3 of the levels are not shown. In addition to the histogram being incomplete the adjustment sliders are now more difficult to use as they too are reduced in length.
To rub it in, the full extent of this anomaly only applies to the Levels Panel accessed as an adjustment layer. Clicking on Enhance>Adjust Lighting>Levels… brings up something like the old full size, 256 pixel wide panel. Well it nearly brings up a full 256 pixel wide histogram except for the fact that a new, since E7, border round the histogram now occupies the 0 and 255 levels leaving only 254 levels displayed not 256.
Why two different tools for the same job?
Why are both now incomplete?
Why change something that worked?
The image above shows a histogram as displayed in the Histogram Panel and the histogram of the same image as displayed in a Levels Adjustment Panel. A slight change of zoom has introduced some distortion but the wide gaps in the left hand image are as seen in the original.

That's a good idea in retrospect I did put it in the wrong place. I really just want to sound off about E9s "new" features.
I recently gave a talk to my local Camera Club Digital Group on the new features in the Elements 9's editor. In preparing the talk I came across irritating new features and changes that I normally put up with but were becoming a pain as I reworked examples. In the end I had a much longer list of irritating new features than the list of new editing features that Photoshop proudly advertise. It just seems to me that there is an unreasonable number of careless programming errors, if not errors then irrational decisions, that were not features of earlier versions of Elements.
After using Es 2,3,4,5,6 and 7 I just feel that E9 was a rip off Layer Masks or no Layer Masks.

In PSE9 is there a way to enlarge the levels adjustment panel and effects panel for viewing?

In PSE9 is there a way to enlarge the levels adjustment panel for viewing? The histogram is so small.
I know we can use the arrow keys to change the settings for the histogram, but it is just the overall view of it I would like to see bigger.
I think with PSE8 the effects panel could be dragged out of the panel bin and made longer AND wider, but in PSE9 it can only be made longer when dragged outside the panel bin.
And I think the whole panel bin could be dragged wider or narrower.

not really apart from changing the resolution, but theres a a couple of things you can do
you can change the "minimum font size" in Safari (and other apps) in the General tab - this will enlarge any fonts to the minimum size you specify if they are under that size
the features in the accessiblilty section of system preferences might be worth a look as well
the pinch zoom feature is also useful
unfortunately there isn't a 1-button setting somewhere that can do this, because apps, documents, web pages, images etc all work independently from each other, they use different font types, different zoom levels, etc. You can't just enlarge them all in sync without content getting jumbled up/distorted. if enlarge an app/page/document and get it looking good, on the next one you would probably need to zoom in at a different level for it to look right

In the Develop Module, the Basic panel disappeared

In the Develop Module, the Basic panel disappeared - how do I get it back?

Or right-click over one of the other panels and select "Basic" from the context menu.

The Basic Panel disappeared from the Develop module in LR

The Basic Panel disappeared from the Develop Module. I was processing photos. When i went to a new photo to process, the Basic Panedl disappeared.
Any help on recovering it.
Janice T.

Odd, you shouldn't need to register, you should be able to view content as a guest.
No matter, simply right-click on one of the other panel headers and select the Basic Panel from the list that appears.
Or go to Window>Panels>select Basic
Or do Ctrl+1 (Cmd+1 on a Mac).

Incomplete Adjust panel

iPhoto on my iBook seems to be missing all components of the Adjust panel other than brightness and contrast. I have tried deleting the pref file and that hasn't solved the problem.
Any suggestions about how to get the rest of "exposure", "tint", "straighten" etc to return to the panel?

ok, nevermind I did another search through the boards and found the answer... my iBook is old and not capable of performing those edits...
sorry to add this a minute too early.

HT3805 Sudden problem: Adjustment panel blank (metadata and library OK). Thumbnail shown as file loads but then image has dark blue cast and is not adjustable. Have current version of Aperture running. Help please

Aperture Help needed: Adjustment panel is blank, although metadata and library panels normal. Thumbnails appear normal but when RAW (CR2) file is loaded, it appears with a dark blue cast, and does not load into the adjustment panel, and is not adjustable. Suggestions please

You may need to register your camera with the the launch service database again, see this post by Alan Roseman: Re: Aperture 3 preview of raw file greenish
There is a "typo" in the command given in the link above, so read also the following posts on how to correctly enter the command and how the fix is supposed to work
Good luck.
Post back, if this does not help.
Regards
Léonie

Photoshop CS 6 Mac - all panels disappeared

I just worked for two hours on a file, and then I hit a button by mistake.
All panels disappeared.
The problem is I retrieved an information from the background layer, so I have no access of anything I did in the past 2 hours, I only see the background layer, no panels, no history, no snapshots.
Escape does not work. Cycling through view modes via F does not work.
How can I get my panels back and get back to my file?

Workspace did not work at first as well.
Then I went to the view panel, and just chose history. History showed up, but workspace still didn't work. I switched to other workspaces, and they didn't show, either.
Then, suddenly, the workspace came back by simply selecting it. It was a bit messed up, with the panels not using the space as defined in the workspace.
Whatever the glitch was, just trying out different options seemed to have brought Photoshop back.
So the issue (whatever happened here) is resolved, thanks!
I'll try the tab key next time something crazy happens, Trevor.

Make a Panel disappear and appear again

Hi Team
I have a frame with Grid Layout where I have 3 Panels - P1, P2 and P3. I want that on the click on a button "+" P2 should disappear and P1 and P2 should align together. Again when the user click "-" button, P2 panel should appear again in its place between P1 and P3.
The problem with the visible(false) method is that it makes P2 Panel disappear but the space between P1 and P3 panels is still there.
Could anybody help me with this trivial issue
Thanks,
Mo

user13019661 wrote:
Hi Team
I have a frame with Grid Layout where I have 3 Panels - P1, P2 and P3. I want that on the click on a button "+" P2 should disappear and P1 and P2 should align together. Again when the user click "-" button, P2 panel should appear again in its place between P1 and P3.
The problem with the visible(false) method is that it makes P2 Panel disappear but the space between P1 and P3 panels is still there.
Could anybody help me with this trivial issue
Thanks,
MoIn stead of making the panel invisible, remove it from the frame and trigger the frame to layout again (for example by calling pack() or revalidate()).

Adjustment panel disappears in

Similar Messages

Maybe you are looking for