Adjustment Preset Order

I can't seem to figure this out....
I'm trying to create a default preset that can be applied to a whole folder of images and hopefully speed things up for me. In my preset I want to use auto levels. The problem is I find that the auto levels makes the blacks a little too strong. I've tried lowering the clipping threshold, but it was at .10 by default, going to 0 isn't noticeable.
So the next obvious thing to do would be to lower the Blacks or contrast. Well here is the problem, if I create a preset with blacks and contrast lowered, and then use auto levels, the auto levels cancels out the blacks and contrast.
I was trying to find a way to put my actions I make in order. So auto levels first, then add blacks and contrast to the preset but can't seem to find any way to do that.
it seems to me Apple has set it up to everything has a default order to be used no matter what. I even tried removing everything from my adjustments panel and then adding them back in the order i would like to use them, but it doesn't matter, everything defaults back to the default order.
As of now, the only thing i can think of doing is running my pics through my preset, then running them again with lowered black settings. This is a pain due to how slowwwwwwww aperture processes.

Short answer - no there is no way to do this directly on one master, if you really really really need to do this export a version with the adjustments (vignette minus the sepia) then reimport that image as a new master and apply the sepia.
RB
Ps. I have never seen what you are describing in your post.

Similar Messages

Organizing local adjustment presets

How can I organize my local adjustment presets in folders? The list is getting too long and I'd like to organize it! Thanks!

Use a alphabetic ordering prefix when naming them, e.g.
001 My First Preset
002 My Second Preset
etc.

How to adjust table order in OBIEE.

now i design logic model in admin tool. tableA join tablleB (tableA.id = tableB.user_id)
after i design it, i drop tableA.id, tableB.user_id) into answer. then i check sql log in analytics web applications.
the sql is like below, my questions is if i want to adjust table order i how to implement it ? "from tableA, tablleB" to "from tablleB, tableA"
select tableA.id , tableB.user_id
from tableA, tablleB
where tableA.id = tableB.user_id

up....

Missing Aperture Built-in Adjustment Presets

Hello,
Just installed Aperture 3.5.1 when i go and try editing with adjustment presets I find that all the built-in presets are missing.I can not figure how to bring them back..those were handy tools as advertised by Apple on web site..very disappointed.Please help me.Here is the screenshot of the effects menu.

Delete Aperture from the Applications folder (but don't empty the Trash), then download it again from the Purchased tab of the AppStore. Probably the download was incomplete.

How to install adjustment presets in Aperture 3

I have some adjustment presets downloaded from the Internet. How do I get them into Aperture?

At the bottom of the Adjustment preset window click the gear select import

Can you combine multiple Adjustment presets in Aperture?

Is it possible to combine multiple adjustment presets into a single "master" preset setting? I know that I can adjust all the settings on a single photo, and then "lift/stamp" the settings onto multiple photos.
What I'd like to do is have a single preset that has all of my standard NEF (Raw) adjustments setup as a starting point for my D3 photos. From that point, I can then tweak them individually for the final version.
I'm finding that I make the same adjustments (Eg: saturation boost, vibrancy, edge sharpen, etc) on most NEF's out of the camera and I'm looking for a faster way to save all the individual tool adjustment presets into a combined "master" preset.
Any help is appreciated.
regards
Tom

Thanks for the link. I had seen this thread prior to posting my question, as it really just gives other means of using "lift/stamp" to create adjustment presets in a different fashion, using existing images as starting points.
What I'm still trying to confirm is whether there is a way to create a master combination from all/any individual tool presets adjusted. It seems like "manage presets" should give some type of ability to combine the individual tool presets, but so far, I haven't seen how to do so....
regards
Tom

How to Create and apply adjustment preset for printing

How can I create an adjustment preset that I can apply to images before I print? In Photoshop CS3, it's easy: I just create an action. But how do I apply a preset that simply shifts existing settings a relative amount instead of applying absolute settings that overwrite image-specific settings?
The problem is that my Epson R1800 and its profiles output images that have a yellow shift to them. What I want to be able to do is apply a +5 shift to the shadow tint (camera calibration) and a +10 shift to the WB tint on top of whatever settings I already have after development.
Any ideas?
(and yes, I do use colour management, my monitor is calibrated, and I instruct LR2 to manage colour and use the profile specific to my printer, paper, and print quality setting)

No ideas here? Surely someone must have wanted to apply an adjustment to compensate for a printer's tendencies or the different dmax, shadow detail, and colour temperature of various papers and illuminant sources (incandescent vs daylight fluorescent, sunlight), or at least use different tone / contrast settings or different amounts of sharpening (before the new print sharpening facility appeared in LR2).

3.3 Adjustment presets

I'm in adjustments doing a raw image and I can not find where my presets are? Used to be in a drop down in inspector? Where are the presets now?

The name has been changed to "Effects".
"Adjustment Presets" are now "Effects".
There is a tile at the top of the Adjustment Brick stack. Click it to drop-down a list of your Effects.

The adjustment presets no longer work ... appear grey / not highlighted ... any suggestions

Aperture adjustment presets suddenly do not work ... appear grey / and do not respond to clicks

I also wonder if this is presets you have imported or the ones that Aperture comes with by default? Or, all of them? But, turning off quick preview mode, if it is on, would be a likely culprit, it seems to me.

Convert Adobe Lightroom Preset into Aperture 3 Adjustment Preset

Hi all,
Just a quick question... I was a Adobe Lightroom user and recently purchased and switched to Aperture 3 and I love it, however I have a bunch good presets in Lightroom and I would like to convert them into Aperture 3 Adjustment Presets so I can continue on using them. Is there any way of doing it in a simple way (like converting a preset file from one to the other so I can import it into Aperture 3)? Thanks for any help, suggestions etc. in this matter!

There is no real automated way but it should be easy enough to do. Just take a look at what the preset does in lightroom in terms of what adjustments it uses and what settings are used. Do exactly the same thing to an image in Aperture, then save as a preset.
I really never understood why people buy "presets" - the adjustment controls are simple and limited compared to what you can do with say a plug-in or even a photoshop action. Replicating the results visually with having no idea what the preset actually did is easy enough - seeing the adjustment blocks it adds and the parameters it is using makes it a no-brainer.
RB

Is it possible to apply a saved adjustment preset to a mask

I am photographing an old photo album that has many badly faded photos. In Aperture I want to be able to apply the same adjustments to the photos on each page without changing the page that they are 'stuck' to. I can do it with the standard presets but not my saved ones!! Any ideas?

You could make several duplicates of the image in Aperture, then crop each of those duplicates to the individual photo you want to adjust, then apply your adjustments.
Otherwise, you'll need a program which would allow you to make detailed masks, such as Photoshop or Pixelmator. With one of those programs, you could isolate each image with a mask and individually apply adjustments/filters on each one without affecting the "border" areas.

Adjust posting order of new/modified entities in ADF BC

Hi,
I have any ADF application which has two tables:
BUDGET
BUDGET_ID: NUMBER(12) -- Which is a sequence from DB sequence BUDGET_SEQ
BUDGET_DETAIL
BUDGET_ID: NUMBER(12) -- Foreign key to BUDGET(BUDGET_ID)
LINE: NUMBER(7) -- A sequential number based on the master with one based, for ex: BUDGET_ID/LINE may be 1234/1, 1234/2, 1234/3 ..., and 1235/1, 1235/2, 1235/3...
CONSTRAINT BUDGET_DETAIL_UK UNIQUE (BUDGET_ID, LINE)
In JDev 11.1.1.2.0, the Model project has 2 entity objects, 2 view objects, 1 association and 1 viewlink, they are BudgetEO, BudgetVO, BudgetDetailEO, BudgetVO, Budget_BudgetDetail_Assoc and Budget_BudgetDetail_ViewLink (based on the association) to access the BUDGET and BUDGET_DETAIL table.
When we mark budget, we will create a row in BudgetVO and then create some rows in BudgetDetailVO. In the BudgetDetailVO, we always reorganize the "Line" attribute to be sequential after create new row and delete row. The code like the following:
private void reorganizeLineNo() {
RowSetIterator iter = this.createRowSetIterator(null);
try {
int idx = 1;
while (iter.hasNext()) {
Row row = iter.next();
row.setAttribute("Line", new Number(idx++));
} finally {
iter.closeRowSetIterator();
My problem is if we add/remove BudgetDetail(s) in the following sequence, it will violate DB constraint BUDGET_DETAIL_UK:
1. Create bRow1 in BudgetVO
2. Create bdRow1 in BudgetDetailVO under bRow1, here bdRow1.Line=1
3. Commit. Everything works fine
4. Set bRow1 as current row
5. Add a new bdRow2 in BudgetDetailVO under bRow1, here bdRow2.Line=2
6. Remove bdRow1, here will call reorganizeLineNo(), so bdRow2.Line=1 now.
7. Commit, exception occurs for violating DB constraint BUDGET_DETAIL_UK.
The SQL running in DB is in order of (presodo):
1. INSERT INTO BUDGET (BUDGET_ID) VALUES (BUDGET_SEQ.nextval);
2. INSERT INTO BUDGET_DETAIL (BUDGET_ID, LINE) VALUES (:TheBudgetId, 1);
3. Commit
4. INSERT INTO BUDGET_DETAIL(BUDGET_ID,LINE) VALUES (:TheBudgetId, 1); -- Violate BUDGET_DETAIL_UK
5. DELETE FROM BUDGET_DETAIL WHERE BUDGET_ID=:TheBudgetId AND LINE=1
6. Commit.
How to adjust to posting order in ADF BC to post the DELETE in step 5 before the INSERT step 4?
Many thanks!
Regards,
Thomas.

This work flows screens for this kind of constrain violation. On solution would be to commit the operation after inserting line 2, and then deleting line 1.
I think this is a poor design, because you will run in trouble if more the one user is working in your system.You have to edit a bunch of rows only you deleted one. It's never a good idea to have an editable pk or even a part of it.
I would try to decouple the line number from the primary key all together. You could easily generate the line number when you show the lines (i.e. using an index of the iterator). This way you can use a sequence number as pk for the line item. The order of the line items is simply the order of the sequence numbers (which will never displayed to the user).
Timo

PHOTOSHOP CS5 ADJUSTMENT PRESET? *Expert*

Im currently working on wedding photos right now, and i have a nice color theme to go by.
Is there a way i can set a whole preset or apply these settings to a batch of photos instead of making changes one by one?
(settings I'm doing below)
*activate photo tab in photoshop cs5 window*
-Smart Sharpen
-Brightness & Contrast
-Hue, Saturation (saturating)
-New Fill Layer (Exclusion)
-Resize
-Flatten
FINISH
is there any way i can apply these changes to a batch like you can in Camera Raw?
or can i set some sort of preset??
i know about the tools preset but that doesn't help with the changes I'm making.
also, each setting DOES save the latest value i use, but its still inconvenient to open each adjustment the same time for EVRY photo, even using shortcuts.
considering the power of this program, there MUST be some convenient way to edit more than one photo if I'm applying the same exact setting each time,
am i missing something here or do i actually have to do these one by one?

You may also be interested in integrating Camera Raw into your workflow so that you can use it's presets .
See Russell Brown's
CS5 Script: Edit Layers in ACR 1.1.5
Episode # CS5_039
http://russellbrown.com/scripts.html
Ideally Adobe would integrate ACR with PS in a way that could be actioned and doesn't strip paths, etc, but my hopes aren't high.

Can you adjust preset title effects on Final Cut Pro X

Im trying to play with the anchor points on a preset title effect called DRAMATICA. The lettes LEAVE too quickly and don´t allow enough time to be read.
Can that be done? Is it possible to adjust the titles setting? Can the anchor point be adjusted for duration?
Thanks!

If you mean changing the relative duration of the various phases of the title, you'd have to open a copy in Motion; but be warned that, at least for an inexperienced user of Motion like myself, it seems to be a quite sophisticated title. There are complex behaviors involved, so it is not like some where you'd just publish another parameter and be done with it.

User Exit for adjusting Transfer Order Quantity

Hi All,
We have a requirement to create a Transfer Order as soon as the production order is released. We have done the configuration for the same but we also need to adjust the Transfer Order quantity based on certain rounding value maintained in material master.
We have tried to use the exit MWMPP001 to adjust this quantity on the Transfer Order based on a field in material master. The user exit is triggered. But the target quantity is not changed as required.
We also tried using the exit MWMTO006 (Over delivery and if Necessary Under delivery Via User Exit) to adjust the TO quantity. But the exit is not being invoked.
Kindly let us know if there is any user exit or BADI to adjust the quantity in Transfer Order.
Regards,
S.Subasree

Hi Subasree,
We are facing the similar problem of user exit(EXIT_SAPLL03A_009) in the enhancement MWMTo006 is not getting invoked.
We want to use this enhancement to split the TO quantity basing on certain parameters maintained in master data. We are using Lean WM.
But, I understand from my development team, that program is checking the available stock at quant level. It will invoke the exit only if the stock available at quant is greater than the TO quantity. I didn't understand why this check is there in ECC6.0.
Currently we are using the same exit in 4.6b, where this check is not there in the code.
If you have found any solution for this(Invoking the exit) please let us know. Thankyou.
Regards
Guru

Adjustment Preset Order

Similar Messages

Maybe you are looking for