Adjustment Presets Gone???

My teeth whitening, skin softening presets and others that were there have disapearered on my Lightroom 3 - Please help x

Try this:
Hal

Similar Messages

  • Missing Aperture Built-in  Adjustment Presets

    Hello,
    Just installed Aperture 3.5.1 when i go and try editing with adjustment presets I find that all the built-in presets are missing.I can not figure how to bring them back..those were handy tools as advertised by Apple on web site..very disappointed.Please help me.Here is the screenshot of the effects menu.

    Delete Aperture from the Applications folder (but don't empty the Trash), then download it again from the Purchased tab of the AppStore. Probably the download was incomplete.

  • How to install adjustment presets in Aperture 3

    I have some adjustment presets downloaded from the Internet.  How do I get them into Aperture?

    At the bottom of the Adjustment preset window  click the gear select import

  • Can you combine multiple Adjustment presets in Aperture?

    Is it possible to combine multiple adjustment presets into a single "master" preset setting? I know that I can adjust all the settings on a single photo, and then "lift/stamp" the settings onto multiple photos.
    What I'd like to do is have a single preset that has all of my standard NEF (Raw) adjustments setup as a starting point for my D3 photos. From that point, I can then tweak them individually for the final version.
    I'm finding that I make the same adjustments (Eg: saturation boost, vibrancy, edge sharpen, etc) on most NEF's out of the camera and I'm looking for a faster way to save all the individual tool adjustment presets into a combined "master" preset.
    Any help is appreciated.
    regards
    Tom

    Thanks for the link. I had seen this thread prior to posting my question, as it really just gives other means of using "lift/stamp" to create adjustment presets in a different fashion, using existing images as starting points.
    What I'm still trying to confirm is whether there is a way to create a master combination from all/any individual tool presets adjusted. It seems like "manage presets" should give some type of ability to combine the individual tool presets, but so far, I haven't seen how to do so....
    regards
    Tom

  • How to Create and apply adjustment preset for printing

    How can I create an adjustment preset that I can apply to images before I print? In Photoshop CS3, it's easy: I just create an action. But how do I apply a preset that simply shifts existing settings a relative amount instead of applying absolute settings that overwrite image-specific settings?
    The problem is that my Epson R1800 and its profiles output images that have a yellow shift to them. What I want to be able to do is apply a +5 shift to the shadow tint (camera calibration) and a +10 shift to the WB tint on top of whatever settings I already have after development.
    Any ideas?
    (and yes, I do use colour management, my monitor is calibrated, and I instruct LR2 to manage colour and use the profile specific to my printer, paper, and print quality setting)

    No ideas here? Surely someone must have wanted to apply an adjustment to compensate for a printer's tendencies or the different dmax, shadow detail, and colour temperature of various papers and illuminant sources (incandescent vs daylight fluorescent, sunlight), or at least use different tone / contrast settings or different amounts of sharpening (before the new print sharpening facility appeared in LR2).

  • Organizing local adjustment presets

    How can I organize my local adjustment presets in folders? The list is getting too long and I'd like to organize it! Thanks!

    Use a alphabetic ordering prefix when naming them, e.g.
    001 My First Preset
    002 My Second Preset
    etc.

  • 3.3 Adjustment presets

    I'm in adjustments doing a raw image and I can not find where my presets are?  Used to be in a drop down in inspector?  Where are the presets now?

    The name has been changed to "Effects".
    "Adjustment Presets" are now "Effects".
    There is a tile at the top of the Adjustment Brick stack.  Click it to drop-down a list of your Effects.

  • The adjustment presets no longer work ... appear grey / not highlighted ... any suggestions

    Aperture adjustment presets suddenly do not work ... appear grey / and do not respond to clicks

    I also wonder if this is presets you have imported or the ones that Aperture comes with by default? Or, all of them? But, turning off quick preview mode, if it is on, would be a likely culprit, it seems to me.

  • Convert Adobe Lightroom Preset into Aperture 3 Adjustment Preset

    Hi all,
    Just a quick question... I was a Adobe Lightroom user and recently purchased and switched to Aperture 3 and I love it, however I have a bunch good presets in Lightroom and I would like to convert them into Aperture 3 Adjustment Presets so I can continue on using them. Is there any way of doing it in a simple way (like converting a preset file from one to the other so I can import it into Aperture 3)? Thanks for any help, suggestions etc. in this matter!

    There is no real automated way but it should be easy enough to do. Just take a look at what the preset does in lightroom in terms of what adjustments it uses and what settings are used. Do exactly the same thing to an image in Aperture, then save as a preset.
    I really never understood why people buy "presets" - the adjustment controls are simple and limited compared to what you can do with say a plug-in or even a photoshop action. Replicating the results visually with having no idea what the preset actually did is easy enough - seeing the adjustment blocks it adds and the parameters it is using makes it a no-brainer.
    RB

  • Is it possible to apply a saved adjustment preset to a mask

    I am photographing an old photo album that has many badly faded photos. In Aperture I want to be able to apply the same adjustments to the photos on each page without changing the page that they are 'stuck' to.  I can do it with the standard presets but not my saved ones!!  Any ideas?

    You could make several duplicates of the image in Aperture, then crop each of those duplicates to the individual photo you want to adjust, then apply your adjustments.
    Otherwise, you'll need a program which would allow you to make detailed masks, such as Photoshop or Pixelmator. With one of those programs, you could isolate each image with a mask and individually apply adjustments/filters on each one without affecting the "border" areas.

  • PHOTOSHOP CS5 ADJUSTMENT PRESET? *Expert*

    Im currently working on wedding photos right now, and i have a nice color theme to go by.
    Is there a way i can set a whole preset or apply these settings to a batch of photos instead of making changes one by one?
    (settings I'm doing below)
    *activate photo tab in photoshop cs5 window*
    -Smart Sharpen
    -Brightness & Contrast
    -Hue, Saturation (saturating)
    -New Fill Layer (Exclusion)
    -Resize
    -Flatten
    FINISH
    is there any way i can apply these changes to a batch like you can in Camera Raw?
    or can i set some sort of preset??
    i know about the tools preset but that doesn't help with the changes I'm making.
    also, each setting DOES save the latest value i use, but its still inconvenient to open each adjustment the same time for EVRY photo, even using shortcuts.
    considering the power of this program, there MUST be some convenient way to edit more than one photo if I'm applying the same exact setting each time,
    am i missing something here or do i actually have to do these one by one?

    You may also be interested in integrating Camera Raw into your workflow so that you can use it's presets .
    See Russell Brown's
    CS5 Script: Edit Layers in ACR 1.1.5
    Episode # CS5_039
    http://russellbrown.com/scripts.html
    Ideally Adobe would integrate ACR with PS in a way that could be actioned and doesn't strip paths, etc, but my hopes aren't high.

  • Where are my presets gone?

    Current LR3 user (3.6) on windows. I store all my presets with the catalog.
    Bought LR4 installed, and then migrated my catalog to LR4 version (it created a copy of the catalog with new name).
    But I don't see any of my presets migrate to LR4, import presets, Metadata presets, printing presets, file renaming presets. None of them are visible in LR4.
    I close LR4, open LR3 and they're all there.
    So how do I transfer all my user presets from LR3 to LR4?
    thanks
    Naknomik

    Hi,
    When you check the option "store presets with catalog", then the presets are saved in lightroom settings folder which is placed in the location where the catalog is located. In this case Presets are not saved in the default location i.e, C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom.. (Here Appdata is hidden folder)
    Hence, when we try to use the LR 3 catalog in LR 4, then in the process of upgrading the catalog, the presets are not found by LR 4 in the default location and thats the reason there will be no presets available in LR 4.
    But if the option "store presets with catalog" is unchecked, then after conversion and upgradation of the catalog, all the presets will be available in LR 4 with all the settings that wrere in LR 3
    There are few modifications in the develop module in LR 4, so there wil be exclamation mark at the bottom right corner of the image in develop module, when you click that it will give option to update the process version , after updating the process version , the new settings and sliders will be visible
    So if you want to use the old process version then new settings and sliders will not be available
    NOTE : If a Preset was created with Process 2010, then LR4 will use it with Process 2010.  If you change the image to Process 2012, then you move away from the preset adjustment parameters and you no longer are using the preset.  So, in summary, you can still use the LR3 Presets, but you lose any new LR4 features and functionality.  You can start with a preset from LR3, change the process to Process 2012 and tweak the image adjustment parameters to your satisfaction and then save that as a new preset.  The result would be an upgraded version of your old preset.

  • Can you adjust preset title effects on Final Cut Pro X

    Im trying to play with the anchor points on a preset title effect called DRAMATICA.  The lettes LEAVE too quickly and don´t allow enough time to be read.
    Can that be done? Is it possible to adjust the titles setting?  Can the anchor point be adjusted for duration?
    Thanks!

    If you mean changing the relative duration of the various phases of the title, you'd have to open a copy in Motion; but be warned that, at least for an inexperienced user of Motion like myself, it seems to be a quite sophisticated title. There are complex behaviors involved, so it is not like some where you'd just publish another parameter and be done with it.

  • Presets gone

    hey there,
    i have a 2 month old install of aftere effects cc on my mac pro,
    in the beginning i could browse my presets easily, since some days
    they are gone.
    i have them checked in the drop down menu to the right.
    also when i browse presets in adobe bridge, and then try
    to doubleclick them i get an error.

    hey,
    i am looking in the
    effects and presets panel,
    i was looking for the
    tipewriter text preset,
    where i usually search by the
    word type, this time nothing appeared
    thanks

  • All pressure sensitive brush presets gone!

    I work with Ps Creative Suite 6.
    Suddenly all the pressure sensitive brush presets are gone- leaving me with only hard brushes that produce 1-size-only brush strokes.
    No matter what brush I choose, I can't manage to make them pressure sensitive now.
    These (red arrows) are the brush presets which are now gone:
    This is what is now left:
    Can anyone tell me why they vanished for no apparent reason?
    I work with those brushes 97% of the time, I really need them back!
    Thank you!

    JJMack wrote:
    Adobe Brush Engine is very powerful and has many settings.
    For some reason I am thinking that you missed the word 'Luke' from the end of that sentance.

Maybe you are looking for