Adjustment yeilds unsupported image format

A2: Made straighten and spotting adjustments on several images and works fine. Then (I think) I was doing same in full screen mode, and when I finished, I get a reddish block instead of image and it says unsupported image format. Actually, when I scroll to these two pics, it first shows the pic, then the reddish block and error.
Any ideas? I tried rebuilding preview. Didn't help.

New Aperture user (I waited until 2.0 to buy it, never had the demo version) and I too am getting the red boxes.
I am starting with existing TIFF files on hard disk.
I have a project with a bunch of 35mm slide scans (about 5300x3500 pixels, 32MB each) that I have set up as referenced images. I rarely if ever get the Unsupported Image Format red box of doom when working with those, even after all manner of adjustments.
I have a project with a bunch of medium format (645) slide scans (about 15000x11000 pixels, 200MB each) that I have set up as managed images. I basically can't work on those at all because of this problem. Sometimes I can do a little work to one image and then when I go to the next, they all start showing up as red boxes. Quitting and restarting aperture fixes it for one image's worth of work again, then red doom.
I set up a test project and brought in 27 of those medium format images as referenced - same thing. So it wouldn't not appear to be a referenced vs managed thing. More likely it's their gargantuan size. Aperture is pathetically slow in bringing the first one up and redrawing the preview after an adjustment, sometimes it even hangs or crashes. The slowness I'm not that worried about, even PS gags on them a bit, they're just too huge. But it would be nice to work on them more than one at a go.
3.0GHz dual-dual-core Mac Pro, 6GB of RAM, Quadro FX 4500 graphics card, piles of excess disk space everywhere, all internal disks... I sure hope that's enough hardware for Aperture!
Duncan

Similar Messages

"Unsupported Image Format" all of a sudden, with previously workable files

Folks,
I've got an issue that seems very strange indeed.
Months ago, I bought a Pentax K20D. I also bought a 17" MacBook Pro and Aperture. Camera and Aperture played well together.
I encountered the known issue with white spots on the image when using the 2-second timer for long exposures. I read about how the Pentax firmware update 1.01 changed the EXIF Make information, causing Aperture to be unable to read the K20D PEF RAWs. So I waited.
When Aperture 2.1.1 was released (and I think the Apple RAW update), I installed both of those. When I heard through this forum that the updates fixed the problem, I also updated my camera's firmware and confirmed that it worked.
So smooth sailing for a few months on Aperture 2.1.1, OS 10.5.3 (or .4, I forget), and K20D firmware 1.01.
Then I bought a Mac Pro 8-Core with 10.5.4 on it. I sold the 17" MacBook Pro. I used the Migration Wizard to move my user account from one machine to the other, but did a fresh install of all applications. (I've been an Apple tech for the past 7 years, and have various certifications. I know the user transfer process isn't perfect, but it should have the following results... read on)
Now, in Aperture 2.1.1 on 10.5.4 with all updates, PEF RAWs taken with K20D firmware 1.01 that were previously edited, manipulated, etc just fine on my MacBook Pro say "Unsupported Image Format" in a big reddish-black box when I try to view the master. If I switch to Quick Preview, it displays just fine, but is un-adjustable. Additionally, any NEW images I copy from my K20D show in the Import window as being 0x0 pixels (or occasionally 160x120 pixels) and will only show a tiny preview or "Unsupported Image Format." All PEF RAWs taken with K20D firmware 1.0 are just fine.
So here's what I've done:
1) Tested a fresh install of 10.5.4 on another HD in the Mac Pro. Installed Aperture 2.1, updated to 2.1.1. This should be perfectly clean. It gives the "Unsupported Image Format" error with any new images from my K20D. Copying the library from my other partition gives the same problems as described earlier.
2) Tested a fresh install of 10.5.3 on another partition in a Macbook Pro. Installed Aperture 2.1, updated to 2.1.1. Applied the Apple RAW update and iLife enhancements. It gives the same errors as before.
3) Tested a fresh install of 10.4.11 on another partition in a Macbook Pro. Installed Aperture 2.1, updated to 2.1.1. This worked perfectly for all PEFs and DNGs.
4) Took a month-old backup (from when everything was working just fine) of my Aperture Library and loaded it into all of the above configurations. Same results!
So what is the deal here? Aperture all of a sudden can't read images that it itself was able to edit a month ago? How come it works just fine in 10.4.11? This seems really messy. I have essentially lost a lot of the work I've put in.
I can use DNGs moving forward, but my past work is now messed up, and the DNGs are almost 75% bigger than the PEFs!
Anyone have any ideas for resolution or should I just call Apple?
Message was edited by: MonsieurBon

If it's any consolation, I had the EXACT same problem today; just opened Aperture 2 and my entire library of images shows "unsupported image format' -- the thumbnails are still intact but clicking on any image suddenly shows the red screen.
Same situation, these images were previously editable and accessible. We had a power outage an hour ago and initially I thought my library had crashed, but I was not actually using Aperture 2 at the time of the outage so I don't think that's the case.
Given the relatively sparse attention Apple gives to these forums, I don't expect there will be a quick response.
I have Leopard 10.5.4 installed, I don't have access to another version of the OS to see if I can get it work. If I'm not mistaken, wasn't there a series of Software Updates recently? I click on these without really checking the apps that are affected; could Aperture have been one of the apps 'revised' by the recent update?

Unsupported image format after moving from one project to another

I scanned several thousands of images to my Aperture library. Went thru all of them providing adjustments to many of them, keywords to all of them and adjust date/time to all of them. All of the pics were visible, format is jpeg.
This is a managed library (all pics within Aperture db).
This morning started to restructure the project files (had three of them). After moving couple of hundred images to newly created project file I started seeing "unsupported image format" red screen after clicking the jpeg. 20-30% of the pictures clicked showed on viewer "unsupported image format".
Tried regenerating the previews. Tried command-option start with first fix the preferences option. Then with rebuild option.
Tried moving the pictures back to their original project file.
No joy... Still 20-30% of the pictures show the "unsupported image format".
Aperture 2.1.
Amy other tricks I could try?
Reported this to Apple aperture feedback of course.
--h

Link the two Macs together: there are several ways to do this: Wireless Network, Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
+Note: there is no importing involved+
The thumbs appear, but the images are added 2 or 3 times each and the events are all messed up.
This happens when you import one Library to another, which you've done by drag and drop:
Creating a black library and over writing the new with the old.
Your problem is arising because of the Network Share. iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
Regards
TD

HT3946 Unsupported image format

I've been getting a message "This photo was adjusted using an earlier version of APPLE RAW processing" unsupported image format and it's been doing this to photos I took today and my older one's any advice on how to fix this?

What is the make of your camera? This problem has occured recently mostly for Lumix and Nikon cameras:
First try, if reprocessing the images will help:
See this section of the user manual on how to do this for selected images:
Reprocessing Images from Previous Versions of Aperture
If this does not help, you may need to register your camera with the the launch service database again, see this post by Alan Roseman:, Re: Aperture 3 preview of raw file greenish
There is a "typo" in the command given in the link above, so read also the following posts on how to correctly enter the command and how the fix is supposed to work
Regards
Léonie

Nikon D800 raw files "unsupported image format".

I've a problem with Nikon D800 raw files "unsupported image format".
I've just upgrade to mountain lion with no success.
also aperture seems the last version
only Nikon software seems to work
thank you
Andrea

Hey Andrea
sorry for the late reply. Have been on some working holidays
My setting is : typ>>>> no
bit>>>> 14
The only information, which is not transmitted is the adjustment level of the AF-finetuning
Good luck and hope it works meanwhile also with your camera
:-)) FJ

Aperture 2.1.4 shows landscape JPEGs as "Unsupported Image Format"

I have just imported a few JPEGs from a Boots scan of some 35mm film I had processed there. All 7 portrait aspect photos are fine, but all 8 landscape format images come up as "Unsupported Image Format" on the maroon screen of death. The original scans from the lab are all landscape, and I viewed them all in Preview and rotated and saved the portrait images therein. I then imported them into aperture and adjusted the date and time metadata (as they show the scan date).
Now, the landscape pictures come up as thumbnails in browser, and show fine for a second whilst "loading" in viewer, then disappear leaving the maroon screen. I can view the pictures fine in iPhoto 09 through "show aperture library", and the exported original through iPhoto shows up just fine everywhere. I cannot export versions from aperture, and "export master" exports something to the desktop that I cannot open in preview. The metadata for the landscape and the portrait pictures are identical (740 KB, camera comes up as "SP-2000") except the pixel size dimensions (1840 × 1232) are naturally inverted.
Any ideas anyone?

Thanks. The short answer is No. The best situation is from the most recently reinstalled version of Aperture where the result is as described in my previous post. Older versions all seem to be corrupted in the way I described.
A longer answer involves another problem I had. I add geo metadata (probably the wrong term!) to my photos so that, when imported to a mapping program, they show where they were taken. Then, when I put those photos on my iPhone, the mapping feature (Places) also showed where the photos were taken. But then, without warning, all this data was lost from the phone and the mapping feature no longer worked, although it continued to work on the computer. I asked the Genius people at an Apple store about this, but they had no idea and could not help. Now, in respect of the photos restored in Aperture where the 'Unsupported Image Format' message no longer appears, the feature has started working again on my phone.

Canon EOS 350D .CR2 pics still 'unsupported image format'?

I was releaved to see updates in Mac OS X (10.4.8) and Aperture 1.5 the other week, hoping it would solve my problem, being able to finally work with my RAW files (.cr2) from the Canon EOS 350D (yes, being in Europe these days).
I followed the posts on the forum throughout the summer, which recommended waiting for the next OS X update (which should support the camera in that raw definition file) and I didn't want to use the workaround, which clearly had problems with the colors on the pics.
After all the updates the other week, nothing has changed on my MBP. Still the 'Unsupported Image Format' on my RAW files. On the other hand, I don't see any posts on problems with the 350D camera anymore as well (only on CR2 files in general).
Am I missing something really basic here (tried rebuild library)? Or, have all the CR2 formats gone down the drain on Aperture 1.5?
Any help is appreciated, as I have already looked into Adobe Lightroom Beta and although I don't want to switch, the files seem to work there...

Yes, the import thumbnail is as you describe, the low res. JPG that is embedded in the RAW wrapper.
10.4.8 needs to be installed prior to Aperture 1.5 .... from a functionality point of view. I am not aware of a dependence that says AP 1.5 has to be uninstalled before a 10.4.8 upgrade or any such, not that AP 1.5 should need re-installing after a 10.4.8 upgrade .... assuming it was working correctly beforehand.
But to this last point, since you have an issue which may be related to AP or OS X, it is likely worthwhile updating both and in order.
Final thought. do you import directly from the CF card / camera vs. using an intermediary tool such as ImageBrowser or DP Professional? I am wondering if Aperture is very OCD aboout the image format wrapper and chokes at the least excuse that other apps. and tools ignore.
G.

Raw Files Appear Deleted or Corrupted Suddenly in Aperture with Unsupported Image Format Error

I have been using Aperture 3, latest update, for the past year. Today, I tried to import new raw files from my new Sony RX1r and, as far as I can see, all raw files in Aperture give the "Unsupported Image Format" and alert symbol in the library where not only new files should be, but also ALL PREVIOUS RAW FILES. These files do no even show up as existing in the iPhoto Library.
This is, needless to say, distressing, as hundreds and hundreds of photos seem lost. Also, the files show a reduced pixel size and file sizes all go to .5 Mb. Some of the photos seemed to show up initially and look fine until I tried to open them, then they all either disappear or show the Unsupported Image Format instead of the opened file. I have tried rebuilding the iPhoto library, but no help.
I have looked in these discussions and see similar problems with Aperture. Perhaps, Apple has not made an update for the RX1r from the RX1 for raw files, but why should all older raw files now be corrupted, especially those recently made with my Olympus OM-D? Had no problem with Aperture until this disaster.
Please help.
William

Just an update. Restarted computer and attempted rebuilds of iPhoto library a couple more times and finally files and photos mostly recovered, except for those I had tried to open. Aperture seems to have a problem, or a host of them, dealing with RAW files, and there is no update yet for the Sony RX1R for Aperture or iPhoto. Lightroom 5, on the other hand, seems to work great with these files directly, so that will be where all photos go for now. Will iPhoto and Aperture just become old archives? It is so infuriating that Apple does not allow for simple importing and exporting compatibility with such an excellent program as Lightroom 5 just to protect their somewhat poorly supported Aperture. I've been a staunch Apple supporter and user since the 80's, but having more doubts about the direction this company is taking.

Unsupported Image Format after opening a file in Photoshop.

As from today,I am getting an unsupported Image Format after opening a file in Photoshop. I have made nothing more than as crop on the image. Why?

Ernie, I misread your post indeed. I never saw a option to send RAW files to an external editor. All I can see is the option to chose what editor and then specify if PSD or TIFF is used. I always use PSD, usually 16bit and in one other installation in 8bit (due to RAM restrictions there).
So Aperture creates the PSD version and PS edits that very version and saves it back into aperture. This is where I sometimes () get that "unsupported image" problem.
I think this also is what Mike does: select a RAW master, use an external editor -> Aperture creates a PSD or TIFF. I haven't tried the TIFF option , though.
My main point was: it all worked for a very long time and with the latest updates it is broken.
have a good day.
Roland

Aperture 3 and DNGs from LX5 raw files: unsupported image format

My LX5 arrived, and I tried converting a raw file to DNG with Adobe DNG Converter 6.2.0.21 beta and importing it into Aperture. No luck: Aperture says it's an unsupported image format. I tried setting the compatibility as far back as possible in the preferences, and still no luck. Any idea why this doesn't work? I used Adobe DNG Converter multiple times to work with raw files from unsupported cameras, so it's a real surprise to get the unsupported image file message.
—Andreas

Unfortunately, this is more about Apple dragging its feet than a cutting edge issue. I got an LX3 and upgraded to Aperture 3 in February of this year. RW2s straight out of the camera always imported just fine. However, I've never been able to get a DNG generated from an RW2 with Adobe DNG converter to work. Interestingly, DNGs from another file format I use (PEF) work fine in Aperture.
I submitted a issue report to Apple about the RW2 to DNG problem back in March, and like so many other suggestions to them, it seems to have vanished into the ether.

B&W - Unsupported Image Format

Aperture continues to misbehave. I scan B&W photos in using VueScan software and a Canon flatbed scanner, import them into Aperture 3.1.1, clean up the photos and sometimes even am allowed to upload to SmugMug and THEN I get the Unsupported Image Format screen and can't do a bloody thing to my photos nor can I even bring them back. This doesn't pass a test of reasonableness.
Anybody have a workaround? This only happens with B&W photos.

Hi Vincent,
Though the following refers to iPhoto, could Aperture have a similar issue as well? When scanning B&W negatives, photos and, documents, then attempting to bring them into iPhoto I had the same issue. iPhoto returned "Unsupported Image Format" or, they appeared as a rectangle filled with black the shape of the imported item. Those scanned items were saved as JPG files.
Opened them in Photoshop Elements (PSE) I could see them. In PSE I found the item's Mode was Grayscale. Changing Mode > Grayscale to Mode > RGB, saving it iPhoto imported it as it should; life is good.
Even though the files were B&W images iPhoto wanted the files formatted as RGB. Now when I scan I do check the Mode making sure the file is in RGB even though the image is grayscale.
Cordially,
RicD

After loading Lion I cannot open some pictures. I get Unsupported Image Format. It tells me picture was taken with Canon EOS Rebel with unknown lens

After loading Lion I cannot open open some pictures in Aperture. I get Unsupported Image Format, all files even the ones I can open are .JPG. Also it tells me picture was made using Canon EOS Rebel with unknown lens.

You mention that 'most' of your files are DNG. Try
running the effected files through Adobe DNG
converter again and then import your reprocessed
files to Aperture and see if the problem persists.
I had a problem with a batch of D2x files converted
to DNG which had been metadata tagged by
PhotoMechanic (the evil app).
B.T.W. You mention that you had been using Bridge.
Are you getting any of the embedded XMP metadata
coming into Aperture during the import process?
Already tried that multiple times...no luck. I'm wondering though if it might be related to metadata as you suggest. I'm still trying different things to see what happens.
I was able to alleviate the problem on one set of images by painstakingly searching my external drive for the oldest backups I could find - CR2 files from before DNG conversion. I then ran those through DNG Converter and tried importing them again (this time, I embedded NO thumbnail, but I'm not sure if that made the difference - I think it was more likely a fluke in the original conversion that caused the problem). This time, it worked.
Now, the big problem is that I still have a couple hundred images for which I can't seem to locate the original CR2 files. I don't typically keep them after conversion, as I don't have the space for both.

10.5.2; Canon 1DsM3 Raw Files = "Unsupported Image Format" in Aperture

Just did the update and pointed Aperture to a folder of Canon 1Ds Mark III raw files (standard raw files, no sRaw or anything like that). Thumbnail previews are grey and Viewer says, "Unsupported Image Format".
Tried rebooting and verifying/fixing permissions. No help. No thumbnails, no images in Aperture.
Canon 1Ds Mark III raw files do show fine in the finder and in Quick Look.
Message was edited by: Jon Roemer

I have the same exact issue.
I do get the same error with 1Ds MIII raws.
Also the G9 raws are not working.
Finally after 3 months it's still not working
I could imagine that there is the need to edit some property file (like I have read before in the forum somewere) to add the new cameras to the list of supported cameras.
Are the D3, D300 raws working?

Unsupported image format

Trying to recover an Aperture Library from an external drive. Pictures display, then photo blacks out and says unsupported image format

I had a backup on an external drive. The hard drive on my mac went bad. Now I am trying to recover off the external drive.
It was not in the vault. I imported the Aperture library back into a reloaded version of the software.
The pictures come up for a few seconds, all the metadata is good. After a few seconds images slowly disappear with a black and grey screen out over the unsupported image format message.
Not sure about referenced or managed.

Unsupported Image Format for DNG from GF1?

I am in the process of trying to switch from Lightroom 3 to Aperture 3 (in case you are wondering why the main reason is increasing integration between iOS and Aperture).
Most of the images in my Lightroom catalog are from Nikon DSLRs which when I import as DNGs from Lightroom into Aperture show up just fine. However, all of the old DNGs I try to import from Lightroom as DNGs that were shot with my Panasonic GF1 don't render in Aperture and just show up as "Unsupported Image Format."
Please note that new GF1 images I import from the SD card of my GF1 import just fine. The problem seems limited to GF1 images saved in Lightroom as DNGs that I am importing into Aperture.
Does anyone have any suggestions as to how to correct this issue?
Thank you.

Solved it. Had nothing to do with Photoshop PS4 install, it had to do with moving my home space to a larger external drive. One of the "import" setting changed (I don't remember changing it) such that the images weren't getting imported into Aperture. (Re-?)checked that, and all is well. Will go for the PS4-reinstall tomorrow.

Adjustment yeilds unsupported image format

Similar Messages

Maybe you are looking for