Adjustments are copied to next image...

Have noticed a strange behavior lately with LR 5 when I am making small adjustments in the Basic panel.
The problem seems to happen when I am moving through the images too fast.
If I make some adjustments to an image and then hit the arrow key to go to the next image, all of the previous adjustments are copied over.
I typically use the Previous button for a lot of my editing but LR does this on it's own. I then need to Reset the photo to default and start over.
Not a huge annoyance until it gets to the point where you need to re-edit some photos and it copies over everything.
This happened several times to me today. I had an event fully edited but decided there were a few photos that needed minor adjustments.
As I was quickly scrolling through making adjustments where needed, I would notice that LR would drastically change the settings to match the previous photo.
This completely slowed me down and I had to re-edit so many photos. In some cases it would even copy over the cropping I had done.
Very annoying.
I hate to say but I am not very impressed with this version of LR so far. Feels rushed and not polished. I understand that each version has it quirks and issues but so many for
an established program. Tempted to go back to 4. Slow and unusable healing brush and now this annoyance are two major hits for me.
Regards,
Toby

After installing LR5 yesterday, importing the existing LR4 catalog and working on pictures imported in the LR4 catalog but not edited in LR4, I detected the same behavior. After looking to the hot issues, I thought, that this is only a problem on my system. Then I found your entry in the forum. During serching for an entry for our issue, I found a lot of bugs reported for LR5 by users which are not mentioned in the "hot issues". I'm using LR since version 1 and I had never expected a bug during the first basic steps in a new version. LR 5.0 seems really to be on of the worst versions ever issued by Adobe. I think I will do the editing of my holiday pictures with LR 4.3 and waiting at least for LR 5.1.
Regards,
Roger

Similar Messages

Aperture 3.2.1 still issues with sorting images in albums, after making adjustments, cannot use arrow keys to go to next image. straightening tool auto turns image prior to straightening inconsistantly

Have updated aperture to 3.2.1, still having some issues during editing images.
1. Basic item is sorting images does not happen correctly, move some images in file, they don't move correctly, after trying to move several, then they almost randomly move around.
2. Straightening tool will automatically tilt images as soon as you touch the tool, turns them on about a 30 degree angle clockwise.
3. Arrows on right side of keyboard used to move images in browser from the editing position, they move them if no editing is done, once you edit an image, cannot move to the next image using the arrow keys.
tks, gmoney in ladner

Oh, baby! This bad boy flies!! Here's what to expect:
I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
Haven't done anybprocessing yet, but i'm liking it!!
Jim

Quick Brushes are disabled on most images

Quick Brushes (all except for Retouch) are disabled on most images in my libraries. Some images the brushes are enabled and work fine.
The images are a mixture of mostly RAW images from a Canon 10D and a 7D. So far I haven't identified any pattern that suggests the camera origin makes any difference––some from each camera work, but most don't.
Any ideas? This is pretty frustrating. Unless I figure something else out, my next step is to uninstall / reinstall Aperture. Thanks for any help!

Problem solved!
Images for which Quick Brushes were disabled were processed using an earlier version of Aperture. When editing an image, the top of the Adjustments showed a little box with this statement and a button to reprocess the image. You can also select any number of images in the browser, right click on them, and select "Reprocess Master." Reprocessed images immediately have access to the full Quick Brushes menu.

Possible to copy recovery set image to HD for storage?

I’m about to create a recovery set for my new Spectre ultrabook on a flash drive. I’d like to then copy the recovery image to a drive on another PC so I can free up the flash drive for other use. Is this doable? I.e., if I need to restore, will I be able to copy the image back to the flash drive and have it work? Are any special tricks involved?

Hi,
Not that simple, copy won't work. By the way, the Flash drive for Recovery is write protected.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Error message when I try to copy new files (images, documents) to mac from flash drive/SD card

I am recieving an error message when I try to copy new files (images, documents) to mac from flash drive/SD card. The message is saying "operation cannot be completed because an item already exists with that name." They are brand new therefore not the same name? I cannot even put them in a brand new folder... How can I fix this?
Please help me!

You don't need to recover the system.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
dot_clean -m
Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

Quick Look sometimes doesn't switch to next image.

Hello, I have 10.6.4 snow leopard.
I have some folders with hundreds of images and one with a few thousand.
When I show a client a slideshow of the images in a folder it's fine. However, if I switch to the Quick Look (the "eye" icon) and use my arrow keys to manually click through images sometimes the larger image preview (QL) doesn't update to the next image.
I've had this problem for some time (even OS X Leopard) but I was able to just click backward one image, then forward... and it'd update. Now, however, I can get several images behind in that preview even if I leave it for several minutes to see if it's just lagging.
In reading other threads about QL I should note that although I've had this problem for a while it's been worse since: I restored my Macbook Pro from Time Machine after my logic board was replaced and since I've upgraded to Snow Leopard. The TM Restore was several months ago, the SL Upgrade was beginning of this month. The images in the folders are all JPG, less than screen resolution/size (eg. less than 1280x1024 or so). These same folders cycle through images just fine in the random screensaver mode, for what it's worth but that's not ideal for client presentation.
Thanks for your time.

I remembered that there had been a slight bug in the Leopard Quicklook, so that if you went to full-screen QL, then used Command-Tab to switch to another program, then Command-Tab back to Finder, you would be back in QL Full Screen, but you could now navigate with the arrow keys. At first I thought this had been fixed, and started mucking about with other key combos and accidently got it going again. Took awhile to figure out exactly what I had done, but it works like this:
1. Select your file, hit spacebar and click the full screen arrows
2. Command-tab to some other program
3. Mouse click the toolbar or sidebar of the open folder with your file in it
4. You can now navigate with the arrow keys
Although I don't really see how this is better or easier than opening the folder, hitting Command-A, then bringing up QL....
Francine
Francine
Schwieder

How to copy/paste texts/images from webpages in iBooks Author?

Hi,
I want to copy/paste text/image contents from webpages with iBooks Author, somehow images can't be copied, only texts can be copied with copy/paste editing. Wonder if there are any ways to include images with simple copy/paste?
Tried to search iBooks Author help, could not find answers. Please help.
Thanks

Perhaps the people who spent a lot of time and money to produce the websites.....and who own copyright ...don't want anybody using their work without payment or credits. Have you contacted the websites owners to ask permission?
IF any person(s) use anything from websites without permission apart from being to lazy to email to request permission....could face a legal action if and when the sites owners fins out.
There is another her misconception that "free" websites and content on "social media" such as the dreaded FaceBook....can be used without consequence. Almost all "free" websites are common licence material - which requires permission and those who give permission do so only for personal or none profit reproduction.
i Use a blocking script on my websites which apart from preventing a right click...those who try are whisked off my website to the the UK copyright website page which explains my rights!
You may wish to check out your iBooks contract with Apple and read their warnings on use of others copyright material.
You could ..and should contact the websites...explain what you want to use and why....and ask them if they can supply media.

When I click on the arrow to go to the next image in a gallery, it does nothing.

When viewing pictures in a gallery (on a website that I have used nearly every day for the last few years), it doesn't advance to the next image when I click on the arrow that should take me to the next image. It works with other browsers, but I prefer Firefox.

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Unable to copy and paste images in latest "Pages"

I use to be able to copy and paste images in my old pages by ctrl + click and choose "copy" and then reverse the process by ctrl + click and choose to paste it.
But now since I updated to the latest pages I am unable to execute this function.
My computer has OS X 10.9.1 and Pages 5.0.1.
Is there any way I could get this working by the above mentioned method.
Regards

It is not ctrl. Unless you are talking about right clicking and using the contextual menu.
It is command c (copy) command v (paste).
There are a number missing features in the contextual menu in Page 5.
Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter
Peter

Can you NOT copy an Amerture image and paste it into keynote?

I'm able to highlight an image in iPhoto, copy it, and paste it into another Mac app like keynote no problem. But my trial version of Aperture doesn't allow me to do that. How come?
Yes, I should be able to drag the image into a Mac app, but often they get out of sync and the recent image I've imported into iphoto is not available for dragging. So I just copy and paste it.
But what's up with Aperture in this area?

To use images from the media browser, you must generate previews of the images first. It sounds like the "automatically generate previews for every new project" is turned off under Aperture >Preferences>Previews. To generate a preview for a photo to use in the media browser, right click it and select "update preview". The quality of the preview photo is determined by the settings in the Previews tab found under the Aperture>Preferences menu.

All my photos have been imported to iPhoto library. Is it safe therefore to delete all photos in the Finder pictures folder? It seems crazy to have them duplicated (all are backed up externally). And are they full size images in iPhoto?

All my photos have been imported to iPhoto library. Is it safe therefore to delete all photos in the finder picture folder? It seems crazy to have them dupllcated ( all are backed up anyway). And are they the full sized images stored in iPhoto?

Assuming you have iPhoto set to the Default setting, then yes, your full sized photos are copied into the iPhoto Library and so you can delete your own stored in the Finder.
Easiest way to check: Select a photo in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Is it stored within the iPhoto Library? You can tell easily in the Finder's column view.
As an FYI:
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Copy of Raw Images

I burned a series of RAW images to DVD on my Mac and then read them into Photoshop on my PC. Although all the images are RAW on the Mac, the copied as jpeg's to the DVD.??? How do I get the RAW images copied as RAW images?
Chuck

So what happens when you try? If there is an error message, please quote the complete error message, word-for-word, verbatim, leaving nothing out (or show us a screen capture).

Save adjustments to repeat on multiple images?

Is there a way to save a set of adjustments to repeat on multiple images? I often scan older slides, and often an entire roll suffers from the same set of lighting color temperature imbalances, faded saturations, sharpening needs, etc. Having to go through each set of adjustments - color, saturation, sharpening, levels, etc - over and over again - is a pain. Not to mention if you want all images to have identical post-processing "looks" you need to manually write down the various adjustment levels to get them the same over and over.
Can Elements 12 do this? I have been using Elements 10 for a while, to tell the truth I updated to 12 "just because" to keep current. I was kind of hoping they'd have implemented a way to save adjustments by now, but maybe not?
Todd
P.S. I am SO tired of software companies completely reshuffling their interface from version to version "just because".... So far I"m hating elements 12 - nothing appears to have been changed for any functional reason, all to just "look different". Yay. That's what I care about, how the interface looks - not how it WORKS....

John101,
welcome to the Discussion forums.
The Image Adjustment feature works for me on both image placeholders and dragged-in images. Did you "mark" the image, so that small squares appear around it?
Regarding your second question: the problems are solved in 10.4.4 (see http://discussions.apple.com/thread.jspa?messageID=1496754&#1496754), so you might consider an upgrade.

How to: Horizontal slideshow with parts of previous and next images

I want to make a slideshow with 6 images in it. The centre image is fully visible, the previous and next images, you can only see parts of it. When you click on the button for previous and next the image swipes tot the centre. Is this possible in Muse, and how???
I dont want to show the slideshow in the full background( yellow area in the screenshot) but only in the main container.(see image below)

"Previous" and "Next" buttons are for selecting the next or previous menu in a series of submenus for multiple chapter selection. Look at the options for indexing that creates multiple submenus for the chapters in a timeline.

Help!!! the app Iphoto is closed marking a erros. I go back and open the application and are not photos. How can I recover them? Are not in the image folder.

I was editing my photos and adding them to a album and suddenly the app is closed marking a erros. I go back and open the application and are not photos. How can I recover them? Are not in the image folder.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Adjustments are copied to next image...

Similar Messages

Maybe you are looking for