Adjustments change after reopening Aperture 3

I am working with Adobe 1998 colorspace TIFF scans from film. There have been adjustments made to exposure, saturation, levels and color. The photo looks great. I quit aperture.
Open re-open, I click on the image thumbnail. The thumbnail reflects how the photos looked as I left them from the adjustments during the last session. Unfortunately, as the image opens up, the brightness suddenly jumps one or two stops and a color cast (seems to be green) is added to the photo. Thing is, it appears that all the sliders are exactly as I've left them. This is affecting every photo I've worked upon, including those shot from digital cameras.
This is making my post-processing life ****. I cannot rely on my edits being retained open re-opening the photos!
I am using Aperture 3.1.1

Thank you for the notes and questions. I've done the following:
1> I've removed all preferences and aperture files in ~/library and /library that pertains to aperture, including a re-install. Behavior persists
2> I've attempted to work on these TIFF files prior to the latest RAW update and after the latest RAW update. Behavior persists
3> I've created an entirely NEW library and placed two TIFF images into it. Rebuilt this library and the other two options. Behavior persists.
4> I've changed my monitor color profile to Apple RGB and Adobe RGB (1998) but this behavior persists across all color profiles.
5> Behavior occurs if ON-SCREEN PROOFING is turned ON or OFF.
6> I've upgraded to OS X 10.6.6 last night and the problem continues.
I've screen captured the actual behavior and uploaded it onto YouTube. You'll see that once I close the program and re-open, the image opens and then color shifts a moment later:
http://www.youtube.com/watch?v=CUjbeLQOWXU
Any suggestions would be highly appreciated. The behavior is not consistent but I've found changing the tint to be the most reliable way of reproducing it. I've got some big client projects in the pipeline and I would like this headache to go away I really would rather not learn Lightroom!

Similar Messages

Text font changed after reopening project

I have one prject which is causing this problem
I have text in various parts of the movie, but whenever I reopen the project I find that the font has changed, but only with some of the texts.
The font I am using is Playbill and all the instances of text use that font.
After closing and reopening the project some of the text instance are correct, but some have changed to different fonts.
It's always the same instance of text which have changed can anyone help please?

I expect though that when the bug is finally fixed they will show those fonts (one up or down) that were selected!
Yes, I hadn't thought about that. It's hard to say.
My guess is that your font will stay the same, and it will be OK.
I say that because it looks like these bugs are based on a criss-cross of information between inline rendering & external rendering/export. That's why it only screws it up after you restart.
So it's like there's an incompetent monkey receiving the information you've set & saving it - who always gets it wrong. Once he's replaced, and he stops "forgetting", it should be right.
No disrespect to monkeys intended, I love them.

Pattern changes after reopening the file.

I was trying to remain the posiition of the pattern applied to an object after I moved (or copied and moved) the object, so I selected the option "Transform Pattern Tiles" < General < Preference or even selecedt the option in the Transformation panel. The result was what I wanted, the moved/copied and moved object has identical pattern style as the original object.
However, after I saved the file, closed it, and then reopened it, the position of the pattern of the moved object somehow changed.
To demonstrate this issue, I've created a pattern like the following:
I applied this pattern to a sqaure, which appears like this:
I ensure both settings in the Preference and Transformation Panel, and then I dragged the square while holding the Alt to create a duplicate in aother position, which of course resulted in an identical square exactly like the above image.
Now the file has two identical squares in it, I saved the file and closed it, and then I reopend the file.
The second square now appears like this: , in which the pattern has different distribution style than previously. The only way I know to solve this is to expand the object and then the pattern style will be consistent after being moved.
I'm just wondering, is it a bug, the way it is, or did I just overlook any settings?
The file I used to test is in the attachment for you to see for yourself. I suggest you copy more than a few and save the file, close the file and then reopen it. Because sometimes you might just get lucky.
Note: I've seen this issue in both Illustrator CS and CS2.

Hi Scott,
Thanks for replying. Let me rephrase my question:
Before moving the object with pattern, I did check the option "Transorm Pattern Tiles".
The result is what I want: a duplicate with exactly the same pattern distribution hehavior. But after I close the file and reopoened it,
the pattern distribution on the duplicate object somehow changed and different from the original object.
I tried to delete AIPres file. But the issue remains.

Adjustment effects changed after upgrades

Here is the problem statement: the effect of certain adjustments made in previous versions of Aperture changes after some Aperture upgrades. As a result, files processed in Aperture change appearance, sometimes dramatically. Does anyone have a method of managing this problem?
I believe that the behaviour is inevitable; Aperture applies adjustments to the orginal master at "run time". This means that as underlying processing methods are changed between different versions of the software their effect on the final outcome, especially in conjunction with other adjustments, can sometimes be dramatically different. For some adjustments, like the RAW processor, Apple provided an "Upgrade" control that allows you to decide whether or not you want to risk the upgrade of that adjustment for a particular image. However, I found that many times there are more changes that cannot be manually managed.
When I open an older RAW file with many adjustments, for a few seconds I can still see the old preview of the image. The preview looks exactly as it should. This only lasts while the engine is recalculating and applying the adjustments according to the new method. Then, Aperture rebuilds the image preview and I can clearly see the difference (usualy the result is disastrous). Having thousands of processed RAW files, pulling up one of them feels like Russian roulette: I never know whether I lost my work or not.
Other than exporting all processed files as TIFFs BEFORE ANY Aperture upgrade I cannot think of a reasonable way to mitigate this. Aperture vaults are useless in this case, as the new version of Aperture re-applies all adjustments according to the new methods. (Please note that versions that do not have certain Aperture adjustments applied are fine; all TIFFs processed externally are unchanged, unless they have Aperture controls applied at the end of the workflow)
Any ideas, anyone?
Thanks in advance,
Sorin Vacaru

The latest is the Highlights and Shadows adjustment. I am not 100% sure when it changed (I could find out, though), but if you open with version 3.4.3 older images that used the H&S adjustment you can actually see an "Upgrade" button in the H&S adjustment panel.
But Apple took care to provide backward compatibility, because they wanted to ensure, that you will be able to keep the old settings. Only if you willingly press that "upgrade" button your images will be reprocessed. In my library not a single image did change.
A clear indication of the problem that I have is that when I open and old edit I can still see the old (correct) preview, until Aperture reprocesses the adjustments and the preview. There is nothing I can do from that point onwards to recover the old edit and look.
Have you changed the Preview settings? In the latest version you can opt to use the camera previews instead of Aperture generated previews (In the Import tab of the Preferences panel). If you toggled recently from "Camera previews" to "Standard Previews", any rebuilding of previews will change the previews you are seeing.

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

Hello,
sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
There may be several reasons that can cause Aperture to crash on start up:
You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
Your Aperture Library or Preferences may have been corrupted
Or you are having a system wide problem with your machine.
Or you may simple be running out of disk space.
It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
Regards
Léonie
Don't you think your user name is a little bit tactless in an Apple provided forum?

CS5 indd files occasionally change after saving and reopening

Occasionally the contents of my InDesign document will change after saving and re-opening. No errors reported during the save however when the file is opened a text box may be out of place or leading may be messed-up on a few random pages or some of the recent changes may not have been saved. Any ideas?

There was no direct indication that you created the code in a standard module. I asked because you reported that the code works in the sample workbook that you downloaded but not in your own workbook.
I don't know what else to suggest at the moment.
Could you create a stripped-down copy of the workbook (without sensitive information) and make it available through one of the websites that let you upload and share a file, such as Windows Live SkyDrive (https://skydrive.live.com),
FileDropper (http://filedropper.com) or DropBox (http://www.dropbox.com). Then post a link to the uploaded and shared file here.
Or register at www.eileenslounge.com (it's free) and post a message in the Excel forum. You can attach files up to 250 KB to a post there (zipped if necessary).
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Video Scope reading changes after render

I'm having problems with my wave form monitor changing after I've rendered video. I applied a proc amp filter to a video clip and made the adjustments that I wanted according to the levels on the wave form monitor. After I render the clip, I notice the levels revert back to the old readings on the wave form monitor, but the actual numerical values set in the proc amp filter seem to remain the same. Also, as far as I can tell the actual video is not effected and still has the proc amp settings applied to it. Any idea what may be causing this?

Try changing your render setting. Go to the Video Processing tab in the Sequence Settings and change it from Render in 8-bit YUV to Render all YUV material in high-precision YUV. I had what sounds like a similar problem where I color corrected a clip with the 3-way, but after I rendered the black level jumped back up about 5 points. Switching to the high-precision settings fixed it. That might work for you.
Hope that helps.
jesse.

Canon 7D Raw Support in Aperture 2 after installing Aperture 3 trial

Hi!
I'm having a really weird problem! A few months ago I purchased Aperture 2 and have been working with it ever since. About a week ago I installed the Aperture 3 trial to see what the general differences are. After playing with it I noticed not enough "useful" changes compared to Aperture 2 to actually purchase Aperture 3. So I removed Aperture 3 and went back to my good old Aperture 2.
Two days ago I bought the Canon EOS 7D, but when connecting to my Mac the Raw files are not supported by Aperture 2! While I was trying out Aperture 3 I used software update to update Camera Raw as well and it seems that Camera Raw Update 3.2 enabled Aperture 3 to work with my 7D's raw files but disabled Aperture 2 to support them! I searched the Apple support pages for older versions of Camera Raw and came across version 2.7 which should enable Aperture 2 to work with the EOS 7D. But as expected, I cannot install 2.7 because 3.2 is already installed!
Does anyone know wether it's possible to "downgrade" camera raw to version 2.7? Or is there any other solution to my problem? It can not believe that an innocent Aperture 3 trial forces me to actually upgrade to Aperture 3 because Aperture 2 now refuses to support my brand new 7D?! Is there anyone on this forum familiar with this problem and able to help me? Many thanks in advance!
Kind regards,
Mick van Jaarsvelt

I am running with same type of problem. I have Aperture 2.0 and can not work the Raw files from my Canon 7D. I have no problems working Raw files from my old Rebel Canon camera. Did you solve your problem?

HT1657 i recently rented a movie from the itunes store in hd and closed itunes on accident and after reopening itunes i cannot find my movie rental. ive searched in my library, movies, etc. and i cannot find it anywhere

i rented a movie from the itunes store in hd and closed itunes on accident after letting it download and after reopening itunes i am un able find my movie rental. ive searched in my library, movies, etc. and i cannot find it anywhere. i did start it... but i have atleast another 20 hours to watch it before the rental expires.

Doublechecking. Did you download the rental in iTunes for Mac, iTunes for Windows, or an iOS device?

Schedule line date changes after each MRP run

Dear Experts,
Clarification needed on how the system plans the MM schedule lines.
Setting: Start in the past not allowed.
3 days for processing of order
The issue is after each MRP run the system is moving the schedule line to the current date + 3 days for processing + the planned delivery time.
If the schedule line is not firmed, after each MRP run ( which happens everyday) the system is moving the schedule line and then giving an alert saying the " order has to be rescheduled to the previous day"
on the second day after the mrp run the system moves the schedule line again by one more day and gives the rescheduling date as " -2 days from today"
this change is happening every day after the planning run. - because of this there are really no backorders ( schedule line in the past ) in the system. we were not able to know if the vendor is actually delayed in this case.
can you kindly suggest what went wrong here ??
we are using strategy 10 for the planning of procured parts. Let me know if more info is needed.
Note: we are also using stock transfer process for some procured parts. there too the PR date gets changed after each MRP run. There there is no lead time in this case. the order is placed on the same day as the requirement as both plants are nearby. There the PR date is changing everyday to the current date.
your advice would be of great help
thanks
Nagendra Kumar

Hi Caetano,
thanks for your suggestion
Yes, we use firm zone for few of the vendors. there the system don't change the schedule lines.
Also for the stock transfer PR's there is no firm zone and the lead time is one day. in this case it changes everyday after the MRP run.
the stock transfer PR's leads to the creation of Schedule lines from the source plant. Since this PR gets changed everyday. the alerts coming out of MD07 gets changed and we really did not know if this order is delayed or not. In the source plant we use the firm zone to avoid moving the schedule line. But then the alerts are always not correct.
is there any setting which helps in not moving the PR everyday without using " start in the past"
thanks
Nagendra Kumar

Address data changed after invoice is created

Hi,
I've a problem to solve and it's related with data changed after invoice is created.
The scenario is the follow:
1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
And, I can't edit this kind of data on invoice creation because it must be done at order level.
So I don't understand why it happen, but it happen on more than one client.
I'll hope that anyone can help me to solve this issue.
Kind regards,
Nuno Rodrigues

Hi Nuno,
the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
Hans

When closing Firefox, after reopening it, my tabs are gone, even though I have Firefox set to remember session.

When closing Firefox, after reopening it, my tabs are gone, even though I have Firefox set to remember session. However, after several hours and opening and closings of Firefox, it will open tabs from the old session, for no apparent reason.

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
In case you are using "Clear history when Firefox closes":
*do not clear the Browsing History
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

After reopening dreamweaver files, the table and its contents are not shown in design view

I got a problem with deisgn view which has stucked me for the whole week. I've designed a webpage with dreamweaver CS4. After reopening this webpage, I got problem to see the tables and images inserted in dreamweaver (the sliced images from fireworks works well). Somehow this problem only existed in design view, but NOT is browswer view/ live view. I thought it is the setting problem, but I tried to reopen the webpage I designed earlier... got no problem in either design or live view. I also tried starting over another new file, same problem existed (tables/images do not show in design view) I am really confused. Any thoughts?
I've already done my research everywhere, but cannot find solution.

Thank you so much... it works...
I should come here earlier... wasted lots of time !!

Purchase order rate change after creation of gr.

In t- code ME22N PO line item Rate change is possible after creation of GR against that line item.
We want to restrict the po line item rate change after creation of goods receipt against that line item.
Please suggest.

solution 1 : Do not give authorization for ME22
solution 2 : Grey out price chage , it should only be possible thru info records, and give authorization of info records in secured hands.
You should not totally restrict price change after GR because there are possibilities that you might require to change rate after goods receipt also. In that case you have to change rate and then have to give restrospective effect to GR.
try above 2 solutions which are simple

Adjustments change after reopening Aperture 3

Similar Messages

Maybe you are looking for