Adjustments during HDR process in CS6

During the HDR process in CS6 a menu come up with an assortment of adjustments. I am able to grab the sliders and slide them from end to end of the adjustments, however as far as I can tell there is no effect on the image. Am I doing something wrong?

No I am actually talking about during the automated merge to HDR Pro. After the basic merging has occurred a menu is present where you can chose the mode (32,16,8bit) and there are sliders for Edge glow (radius and strength) tone and detail (gamma exposure and detail) there is even an advanced window (with shadows, highlights, vibrance, and saturation) as well as a tab for curves. I do not see a preview check box. I can exercise all the sliders but do not see a response in the image. All of these activities are present before you say OK to accept the merge.
Actually when I looked at this again while writing this it appeared that the first time I exercised the exposure slider that it did something, but only once???

Similar Messages

CS4 crashes during HDR processing, why?

Hi, I have an G4 Mac dual 1000 cpu.
My memory is generally limited, but on my Mac it is 1.5 Gb.
I have my Photoshop preference set to the upper end of Ideal, but sill am wondering if there is something I am doing wrong. When i initiate a HDR in Photoshop or in Bridge, the photo files are stacked in the automated process but the system locks up in the "Align selected layers based on content" phase.
The photos were shot on a solid tripod, so the processed should not be taxed by any means.
I reduced the number of selected images from 5 to 3 but i still get the Photoshop "not responding" issue and I have to use Force Quit.
CS4 is new to me i just upgraded by downloading. Should I download again?
I have never found any temporary tech support included with the purchase price of software from Adobe, is there any 30 days support i am not aware of?
What kinds of things am i over looking? If you will, easy on the acronyms and thankx for you assistance in advance.

RandyS907 wrote:
my plan was to get maybe 400 Gb internal drive, then copy the contence of the current drive onto the new one (400 Gb drive), and make that the boot disk with the OS and CS4 on it.
That's a sound plan.
RandyS907 wrote:
reformat the old 80 GB drive and use that as the Scratch disk drive.
Yeah, that would do, although I personally like more.
RandyS907 wrote:
Is there a special required way to copy the boot disk to a new drive so that the new dive is able to become the new boot disk? That is, are we talking about a method that is more specific then a "copy" + "paste" process ?
Get SuperDuper and make a bootable drive from your current boot volume. It will make an exact, bootable drive. The alternative would be to install the OS and all applications from scratch, from the original media.
Do not just "copy and paste", that would be an unmitigated disaster!
RandyS907 wrote:
reformat the old 80 GB drive and use that as the Scratch disk drive. i am not shure how you do that, I assume the photoshop preferences has some way to target a designated drive for that purpose.
Yes. Photoshop > Preferences > Performance… > Scratch Disks. Make sure you UNcheck your boot drive in that dialog box and use the arrows to move your dedicated drive to the No. 1 position. I'm surprised you haven't looked in there yet.
Make sure all your three drives, including the external one, are formatted for Macintosh Extended HFS+ (Journaled) and NOT-case-sensitive (very important!), except that the scratch drive should not be journaled just Macintosh Extended HFS+.
Go easy on the expenditures. Remember there's a chance that your G4 may not be able to cope in the end.

Nik plugin HDR v2 and CS6

A curious error which appears after using HDR v2 plugin on CS6 (Mac OS X Lion or Mountain Lion, on both systems) is the following : after you have finished your adjustments with HDR v2 from Nik, you get a black OR white square in middle of image, using approx 1/8 of image size. Depinding of zoom factor you'll see this B/W square or not, it appears or perhaps disappears for a while. I have tested it on two different systems under 10.7 and 10.8, nothing different ! Otherwise CS6 is working fine. This issue seems to be NOT present in CS5, I have never seen it until now.
Asking Nik Software, the answer was clear : it's a bug on CS6 side : "Pls. save the image from CS6 once and load up the image again. It is OK than. It is CS6 issue."
Ok, closing image and loading up is not the best way (??) because of course you'll loose all history state in CS6 and may be job is not finished..
Anyone had encountered same issue ?
Cheers.
News from Nik Software : the same issue under windows OS but not for same reason : graphic card driver, so likely depending of windows configuration.

Google updated the plugins recently to correct this problem:
https://support.google.com/nikcollection/answer/4400822?hl=en&ref_topic=3001406
Version 1.109 (December 11/2013) is the latest:
Fixed black or white tile artifacts that might have occurred after returning to Photoshop from plug-ins
You can find out the version you have installed by launching Photoshop:
On Mac: Select Photoshop>About Plug-in>Analog Efex Pro… (or any other NIK Plug-in)
On Windows: Select Help>About Plug-in>Analog Efex Pro… (or any other NIK Plug-in)

Photoshop stops running during HDR merge

Hello Photoshoppers
Hope some one has an answer..During the HDR merge I get a window that tells me that PS has stopped running..Click OK then PS shuts down . This is what I have on the issue so far ..Adobe chat help had me do all kinds of crazy stuff along with updates..The last session they had me download and open their sample pictures and try to merge them. I was infact able to merge them just fine. Hence since I was able to merge their sample pictures..there is no program issue as they see it... I can merge 2 of my pictures but no more than 2.. My pictures were taken with a Canon T2i , a tripod and remote shutter device was used.. The pictures all appear exactly the sam except for exposures.. (manual but not RAW) and were downloaded as JPEGS with the sd card).. All my pictures have a file size less than 6.mb. Adobe's sample pictures were all less than 1.mb (700 kb or so ) My computer is right out of the box Windows 7 ..64 bit..4gb Ram... PS preferances, Ram was increased to allow 96% for PS usage but did not resolve the issue..
Is there a file size limit that I havent read any where? Any one else experience, or know about this issue or have any ideas ? And yes I am new to this so don't beat me up too hard..Not to mention trying to navigate Windows 7 ..instead of XP
Thanks
Message title was corrected by: PECourtejoie

Are you running Merge to HDR from Bridge or Photoshop? If Bridge, then either make sure Photoshop is closed before starting, or open the 64bit Photoshop and then run Merge to HDR from Bridge. I am assuming that you are running from Bridge because it is so much easier recognising the bracketed set in Bridge. I would increase the memory setting in 64bit Photoshop to something like 80% if only to prove a point - you'll know you have plenty of resources available to work the HDR that way.
To change the settings go Edit > Preferences > Performance.
What camera are you using, and how many images in the bracketed set? I use a 1DsMK3, and 1DMK4 both usually with five frames, and my old Q9550 system with 8Gb easily coped with five x 21Mb files.
All cameras that have a AEB (Auto exposure Bracketing) feature change the shutter speed, and never the aperture. A note here: I am able to change the AEB order to run from darkest through to lightest exposure, instead of the default zero offset followed by minus offset, and finally plus offset. Having the shots in exposure order makes them much easier to find in Bridge.
Incidentally, much as I love Photoshop. it comes a poor second to HDR Soft's Photomatix with HDR processing. ACR does a better job of processing the RAW files, and Photoshop is probably better at aligning the images, but Photomatix is better at the Tone mapping side of things, and keeps getting better. I am not sure if I am aloud to post this here, but 4.2 beta2 was released yesterday, and you can use it for free, but it places watermarks on the processed image
http://www.hdrsoft.com/download/privatebeta2/win42.html (Windows)
http://www.hdrsoft.com/download/privatebeta2/mac42.html (Mac)
Mods, just delete the links if you think them inapropriate.

Consumption during the processing time of the production order

Which adjustments must be made in the material master for the calculation of the lot size in the MRP run, that the consumption of the material during the processing time of the production order is considered for the calculation of the lot size.

Hi ,
You have to judiciously indicate the re order point in the material master( the re-order point is the sum of saftey stock and consumption during replenishment lead time).
How ever , this does not in any way influence the lot size , but only influence the no of lots i.e the procurement proposals. The lot size is determined by the lot sizing procedure selected by you , depending on various factors like agrrements with your vendor , optimum lot sizes to reduce the cost of procurment and storages etc.
You can refer to the following url for details on lot size :http://help.sap.com/saphelp_47x200/helpdata/en/fe/819b9f643b11d3b4e40004ac160649/frameset.htm
and for details about re order point :
http://help.sap.com/saphelp_47x200/helpdata/en/db/6f143ea7ec11d3a8330000e82a3c24/frameset.htm
Hope this information will be useful.
Regards
Raghuramam.

CRM 2011+An error has occurred during report processing. (rsProcessingAborted)

Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy Kumaravelu

Hi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps!

[Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

Looking for quick creation of a new contact during activity processing

We are looking for a quick way to create a new contact during the process of activity management. Once I have selected my business partner and then I search for a contact, if the contact I need does not exist yet there are several long involved ways to go create the new contact. Several people from SAP have alluded that there is an add button that should be available on the business partner central search window that comes up when you look for contacts but we have no add button. Does someone know if the add button becomes available later? We are on CRM 5.0 - has anyone customized a way to add a contact here without having to go into the account application relationship tab. We are coming off of Mobile Sales where there is a pop up window to add a contact. We need to replace this functionality.

Hello Pascale,
"Follow-up" button is present to enable a quick creation of follow up.
That is end user can just input those limited fields, and click on this button to create the document without going into the detail.
And at the same time, standard IC do provides another link to the detailed follow up documents to enable user add more detail.
The link "Follow-up Details" can realize such purpose and should be the one you are asking for.
The steps are:
- select the transaction type in the drop down;
- click on "Follow-up Details" link, this lead to another page of the detailed activity creating, only at this time the activity is being created;
- click on the Back button without save, you will return to the previous screen, and get the link in Activity Clipboard for future access;
Hope I have understood your requirement correctly!
Hongyan

Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012

HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
    opmnctl task failed
    Step Executing: opmnctl start coreapplication_obisch1 failed
    Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..

Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

When I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run"

when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.

Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem.

When i download iTunes during downloading process on messege shown: An error occurred during the installation of assembly'Microsoft CRT.version="8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86.

HELP PLS.......when i download iTunes during downloading process on messege shown: "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes.
Please help .

You should check Windows update for Service Pack update, if there is any.
Otherwise, try to fix and update windows system filesas follows:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Then do the download again.

HT1727 How can i retrieve purchased audiobooks that were not synced (problem encountered during sync process). My account shows the purchase history, but the apps are no longer displayed in itunes or on my ipad or iphone

How can i retrieve purchased audiobooks that were not synced (problem encountered during sync process)? My account shows the purchase history, but the apps are no longer displayed in itunes or on my ipad or iphone. I'm not very savvy with using iTunes - I don't think is very intuitive (unlike me:)). Any help would be appreciated.
Thanks

Hello mcegirl4,
Thanks for using Apple Support Communities.
Please refer to the instructions in the following article to assist in downloading those previous purchases from iTunes and the App Store:
Download past purchases
http://support.apple.com/kb/HT2519
Take care,
Alex H.

An error has occurred during report processing. (rsProcessingAborted)

Access Web Databases and SSRS
Issue:
After creating an access web database, such as Contacts Web Database in SharePoint 2010 we receive the following error when trying reports. This only happens on the Address Book, Phone Book, and Contact List reports. The Contact
Details and Printable Labels reports both work. The reports do not begin to error until data is added to the database (no errors initially).
I have duplicated this across all of our environments with the same results and get similar results when adding a Projects Web Database.
Environment:
Prod:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
QA:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
DEV:
1 WFE/App Server – SP 2010 sp1
1 SQL Server – 2012 sp1
Background
SSRS was installed following recommended guidelines and can be verified to be working. http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Error full text
Microsoft SQL Server Reporting Services
An error has occurred during report processing. (rsProcessingAborted)
The Group expression for the grouping ‘Group1’ contains an error: Request for the permission of type 'Microsoft.Office.Access.Server.Security.AccessServicesPermission,
Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed. (rsRuntimeErrorInExpression)

Found the answer
here.
In short, SSRS 2012 installation missed a couple of config entries. You'll have to add them yourself:
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config. Search for the <Data> tag and add this entry:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c" />
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\Reporting\rssrvpolicy.config.
Search for <NamedPermissionSets> and add this entry:
<PermissionSet
class="NamedPermissionSet"
version="1"
Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, around line 70, find and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”

An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
Praveen

Hello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
    The indicator AUFER from the delivery type contradicts the
    storage location constellation that was determined by the
    WM system.
    TVLK-AUFER = '<VAR2>'
    WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

Adjustments during HDR process in CS6

Similar Messages

Maybe you are looking for