Adjustments window under Expert
I just installed PE 12 and I don't see an Adjustments window on the right under Elements under Expert. Is this not part of the Expert screen? Also, I don't see the little box with the green check next to the box with the crossed out circle to cancel or accept a change. When I try to use some of the tools, they don't seem to respond or do anything. This is new to me so please bear with me. Thanks
Are you thinking of Premiere Elements the video processing program?
If not that, then Windows> Adjustments will show the adjustments panel in PSE, but it won't have anything unless you've added, and selected, an adjustment layer.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.
Similar Messages
-
Help needed for exporting video under expert settings
I was exporting my 4+ minutes video that I had created under expert settings (Compression type: H.264, Frame rate: 29.95, Key frames: automatic with frame reordering checked, Compressor quality: Best, Encoding: Best(muti-pass) & Data rate: Automatic). After the process was finished, I found out that the video would play normally for the first 25 seconds and then the video will freeze but the audio continues to play as normal. I then tried using the CD-ROM option instead of the expert settings and the video exported was playing fine.
I was using iMovie 5.0.2 and I have Quicktime 7.1.3 and iTunes 7.0.1
Help is much appreciated!
Message was edited by: macmacloverOpen the poorly working file in QuickTime Player and then open the Movie Info window.
What is the data rate of the file? If it is too high your machine is probably too under powered to play it. -
DVD optical drive no longer works with Windows under bootcamp or parallels
For some strange reason, the DVD optical drive- Optiarc 5680 on my 27" iMac, no longer works anymore with Windows under Parallels or Bootcamp. It used to work perfectly fine before, but now it just shows up with a yellow exclamation mark under Device Manager and Code 39 "Windows cannot load the device driver..."
The DVD drive continues to still work fine with OSX. But it won't work anymore under Windows via Parallels or bootcamp, despite trying to uninstall the optical device drivers, update, reinstall, etc. Anybody else experiencing this or have any ideas?Finally found the solution for anybody else who runs into this problem. It was solved by doing a registry mod in Windows from this site:
http://aumha.org/win5/a/xpcd.php#problems
described in “My CD drives have vanished (from Explorer, Device Manager, etc.)”
After applying the registry changes the DVD optical drive worked instantly again with Windows....sigh...guess I can't blame the Mac on this one. -
HP Featuring Windows 7 Experts on Forums All Day Today!
Hello everyone,
We just
wanted to remind to you get ready for our Windows 7 Experts Day taking place
from 12:01 am to 11:59 pm eastern time today. With an unprecedented
number of experts from HP, Microsoft and Symantec, this is the perfect
opportunity to have all your questions related to the new OS and HP products
answered by the industry's best and most knowledgeable authorities on the
topic.
Special
boards created specifically for this day include "Windows 7 and Printing",
"Windows 7 and Notebooks," and "Windows 7 and Desktops."
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!Hi Jan69
HP is trying hard to work with our vendor to get these disks out. There are several forum posts about this. Sorry you are having to wait.
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos! -
Thank you for coming to Windows 7 Expert Day
Thank you for coming to Windows 7 Expert Day.
The Windows 7 Expert Day boards are now locked.
After we analyze the conversation, we will move all of the conversation to the following boards:
Notebook Operating System and Software
Desktop Operating Systems and Software
Printer, All-in-One Software and Drivers
It generally takes us about 24 hours to do the analysis. Sorry for any inconvenience this may cause.
We hope you found all 3 of the windows 7 Expert Days helpful. We enjoyed talking with you.
**To learn about upcoming HP Expert Day events, click here**
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.Not what you want to hear, I know, but this is a user to user forum. No one here has the power to help you.
You can get information about an order you placed on the Apple Online Store through the Order Status page. If you prefer, you can also get order status or make changes by phone at 1-800-692-7753.
You can try calling again and if the person you speak to can't help, ask to speak to a supervisor. -
Adjustments window is not opening! Please help -
I'm half way through editing some photos when suddenly the adjustments windows won't pop up. When I click 'level's or 'curves' or 'brightness and contrast etc, it adds it to my layers but no actual window pops up allowing me to actually adjust the birghtness or levels etc.
Really frustrating as I've tried everything to find how to get that window back. \
Thanks so much in advanced!
JasminWhat version of Photoshop? In newer versions of Photoshop the popup window only open when curves, levels are applied directly on the layer. Adjustment layers like levels and curves are adjusted in the properties palette. If the dialogs should pop up but don't try resetting your Photoshop tool and if the does not work try resetting your Photoshop preferences/
-
Connect macbook pro and imacac shows up in the finder window under shared b
I have turned on file sharing on both. My imac shows up in the finder window under shared but the macbook won't connect. Is there something else i need to do?
Same problem. Let me know if you find anything please. Thanks.
-
Getting the name of the window under the mouse cursor
Hello All
Is there a way to receive a window name of the window under the mouse cursor? All windows in interest are LV windows, and all of them works separatelly. After the mouse click I would like to get the window name.
The reaso nfor asking is that I have a sequence of setting of different windows. I need to create a doccumentation and I need all windows front panels send to MS Word.
I thought that my application can read the window names and by using the LVwutil32 get the front pannels of the windows and send them to MS Word.
Problem is that in the library I do not have a function like "Window on Top.vi" or something like that.
Anyways, the problem for me now is how to get an active (most top) window
name?
thanks
PawelHi Pawel,
I found the following VI in my "trunk" that I made a while ago (written in LV6.0.2). It returns the active VI (and thereby) the Window name. Mayby you have some use of it, but I believe this is what you want. Only works for Windows though.
Regards,
Mattias Ericsson
Endevo, Sweden
Attachments:
WindowsUtil_GetActiveVIWindowName.vi 54 KB -
Resolve trouble between Parallels and Windows under Boot Camp
After seeing several threads relating to this issue, I decided to make this it's own thread instead of trying to reply to each. hopkinsvscloudlivestream.blogspot.com/2013/03/watch-hopkins-vs-cloud-live-stream-2013.html This article NOW resolves all issues pertaining to using Windows under Boot Camp through Parallels, INCLUDING activation. Hopefully Parallels will be able to integrate these fixes into a future release.
Before doing anything, I would recommend preparing your existing Windows installation under Boot Camp, for Parallels, before trying to access it through Parallels. If you have already installed Parallels and now have problems, don't worry, this article should address and resolve these issues as well.
Something to know upfront: using your existing Boot Camp installation with Parallels will most likely require you to activate your Windows installation a second time. The reasons for this are addressed in Section 4 of this article.
Section 1: Preparing your Boot Camp Installation for Parallels
(If you already tried to access your Boot Camp installation through Parallels, and can no longer get into Windows through Boot Camp or Parallels, please skip this step and come back to it after you have completed Section 2.)Personally, I think the software fix is a band-aid for a larger hardware problem, probably involving the power management circuitry. I think the reason Photo Booth and QuietMBP and Windows XP all work to silence the noise is because they draw more power by using more CPU, and it's the extra power draw that kills the noise. Nothing scientific, mind you, just a hunch.
What if your speakers made an annoying hum that went away whenever you started playing music through them in iTunes? Would you still think it's a software problem? I think it's a similar situation here - where software can cover up the issue but not really fix it... -
Where does time machine store content that would be found in the Finder window under "All Images, All Movies, All Documents"? Also, I have many Garageband projects and mp3 files I can't find.
Easiest way to find time machine files is to open up the folder or application(works for email and iphoto) they were in - then click on time machine ICON or enter time machine from the time machine menu to go back through the files.
-
New Window under File doesn't open in Mavericks Safari - Bug?
This newOS is tricky! Sarai's New Window under File isn't working for me. When I select it nothing happens .....
I had the same problem. Do you have Glims installed? If so, uninstalling it may fix the problem.
You can download an uninstaller here:
http://www.machangout.com/node/9
After you mount it, and click the uninstaller, it says it won't work because it's an unidentified developer. So you have to right click and do Open, and then it will give you the option to open.
After I uninstalled it, Safari 7.0 works fine! -
PSE 11- FX and Graphics buttons not working under Expert Editor Mode
Under 'FX' in Expert Editor mode, the Filters, Styles and Effects tabs do not work, and similarly under "Graphics" the shapes and text tabs do not work. I have looked at C:\Programmes\Adobe\Photoshop Elements 11\Plug-Ins\Panels and find the 'Panels' folder is empty, which suggests this is a possible cause?? EDitor and Organiser are otherwise (at long last after Organiser faults rectified) now working fine. PSE 11 is running under Windows XP Service Pack 3. Any suggestions please ??
Thank you Jon; I see what you mean about creating an FX layer and by double clicking I can bring up the adjustments. Problem is when I go into Expert Editor mode, at the bottom right side of screen are five 'buttons' - Layers, Effects, Graphics, Favourites and More. When I click Layers, I get the Layers Pane up on right hand side and it works fine as I can create different layers etc, however when I press 'FX' I bring up a plain grey panel with three headings at the top of it; Filters, Styles and Effects - these do absolutely nothing, even if I am working on an FX layer and I am guessing something has gone missing or been corrupted.
The 'Graphics' button now works (I told it to search Windows>Graphics, which I read in another post) -
ECC 5.0 IDES on SQL in Windows under VMWARE
Hi Experts,
I need your help in installing IDES ECC5.0 on SQL 2000 in Windows 2003 Standard under VMWARE. After installing the SQL 2000 with SP 4, Latin Character set & colltion. I colud successfully install Central Instance, the problem I face while installing Database Instance, during the "Database Load" the installation keeps failing , I could not proceed further.
When I start the Database Instance installation again, I could not use the same SID, its throwing an error & Uninstallting SQL Server 2000 and reinstalling it solves the issue, do we have any workaround!!
Thanks in Advance.
Ahamed
Edited by: Ahamed Yasin on Sep 8, 2009 10:00 AM> I need your help in installing IDES ECC5.0 on SQL 2000 in Windows 2003 Standard under VMWARE. After installing the SQL 2000 with SP 4, Latin Character set & colltion. I colud successfully install Central Instance, the problem I face while installing Database Instance, during the "Database Load" the installation keeps failing , I could not proceed further.
Well - without knowing what was failing it's impossible to suggest something.
Imagine what you would ask a friend if he calls you on phone and says "My PC is not working, please help.."
Markus -
Under the File tab, I no longer see Close Tab or Close Window. Thus, I end up with a lot of open windows, because if I click File Exit, I'm logged out.
You need to create a file userChrome.css in the chrome folder in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and paste the above posted code in the file.<br />
You can use the ChromEdit Plus extension to make it easier to edit the file.
You can access the profile folder via this button:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
That code will cause all hidden menu entries to get visible all the time, so you can use the mouse to open the menus and do not need to use the keyboard. -
Open Dialog Box: full file name is not displayed in edit window under Windows 7
Only the last 16 characters of a file name are displayed in the edit window of a Common dialog box under Windows 7. What is the fix to this problem? I am coding in C/C++ and my compiler is Visual Studio 2005.
Hi warengharding624,
Based on your description, your issue is related about C/C++, since this forum is discussing about Windows Forms Controls, and I will move this thread to C++ forum.
In addition,Could you share us what the type of your project is?
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.
Maybe you are looking for
-
I have had this printer for about two years now. All of a sudden it has decided to stop working, and I cannot get it to work now. All connections have been connected and all software drivers updated. What can I do to resolve this issue? Thanks.
-
Message Mapping: How mapping is handled in ABAP & JAVA STACK
Hi All, I am interested in knowing how the mapping is hanlded in Background. Is that in ABAP or JAVA Stack. Whats the architecture behind it? Any documents related to it. Thanks in Advance. Best Regards, Yaseen M
-
HT1766 How do I retrieve mistakenly deleted note from my iCloud backup
I mistakenly deleted a note from my iPad, I need this note, help how can I get it back
-
Lion upgrade, language question
I'm currently living in italy and I want to install Lion OS X, my app store is all in italian. Will lion be in Italian? Or will it be in English like the version of Snow Leopard that is currently on my computer? I really don't want the unpleasant sur
-
Dump after going back from a view
i call view VIEW_SPRL from view VIEW_ALTA, and when i go back to VIEW_ALTA using navigation plugs, this view is showed for about a second and inmediately after i get the dump error "Access via 'NULL' object reference not possible" Any idea ? Should i