ADLink PXI fails after upgrade to Windows 7

Dear all,
Our ADLink 9846 PXI card does not work anymore after upgrading to windows 7.
After a reset of the system the Analog-Digital card sometimes measures one trace, after that it always gives a time out.
I installed all latest drivers and Labview(s), from  ADLink (DAQPilot and DAQmaster) and NI, see attached screen shot.
The PXI-GPIB card works well. The ADLink expert says it all works fine in their lab.
What else (besides from downgrading to Windows XP) can I try?
Many thanks in advance for suggestions,
Willem
Attachments:
NImax.png ‏156 KB

I did not mention that the optical link (MXI-4) and the PXI-1031 are National Instruments.
That is why I was hoping someone at the forum might have experience with a similar setup.
regards,
Willem

Similar Messages

  • System Image Backups fails after upgrading to Windows 8.1 with 0x80040154

    Backed up a Windows 8.0 system to DVD with no issues. Upgraded the computer to 8.1, and now when we tried to backup the system to DVD, we are getting the error message "An error occurred, class not registered (0x80040154)"
    Anyone have any suggestions on how to fix this issue?
    Richard

    Hi,
    According to your description,did you format the BD-R disc ?
    Before you start system image backup, please format the BD-R disc.
    For more information, you may refer to:
    0x80040154 error may occur when you create a system image backup in Windows 8.1
    http://support.microsoft.com/kb/2934165/en-us
    Regards,
    Kelvin Xu
    TechNet Community Support

  • Networking Issues after Upgrading to Windows 8.1

    I have a Windows 8 desktop PC that is working fine with my network.  I can browse the Internet fine using all major browsers etc.  After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
     The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
    IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error.  I normally have to refresh 2-3 times to get a new page to load, sometimes even more.  Everything works
    fine from a laptop connected at the same time so it isn't an network issue with my provider.
    I thought this might be a driver issue with the two on-board Marvell wired network adapters.   I wasn't able to rollback the driver to older versions I found on the Internet.  I then purchased another network card, Intel Desktop gigabit and the
    issue still persists with that adapter.  I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled.  I tried a new network cable and no luck either.  I also tried resetting the IP stack using
    the various netsh commands.
    After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store.  I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
    some of the recent guides that are available.  That all worked but it didn't fix the networking issues.
    I re-installed Windows 8.0 and the networking is now fixed and back to working normal again.  I'd like to try again but I think I will have the same problems.  I can't imagine why this would be a driver issue as I tried 3 different network adapters
    and two installs of Windows 8.1.  Any ideas what would be the cause of the Windows 8.1 issue?

    HI,
    Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
    the performance of win8.1.
    Please also test this issue in safe mode with networking.
    Please refer to:
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
    I’d like to share the following article with you:
    Wired and wireless network problems
    http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    Regards,
    Yolanda
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    The issue occurs in safe mode as well under Windows 8.1.  The motherboard is an Asus P5B Premium, however it works on Windows 8.  How would I update the chipset when booted into Windows 8.1?  In Device Manager it wasn't allowing me to update
    the network drivers as they were newer versions already installed.
    Edit:  I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.​4.​0.​1026 and the issue still occurs.  I am also running the latest BIOS that is available.

  • Can't install cc-patches after upgrading to windows 8.1

    Hi Adobe-Team,
    after upgrading to windows 8.1. I can't install updates and patches of the creative cload programms. I'm able to uninstall programms. I'm able to install programms, but i cant't patche them. Got this message: "Installation erfolgreiche, aber Fehler beim Patch (U44M1I210). I've no idea what to try further more.
    Thanks for your  help
    Andreas

    Hi Andreas,
    Error Code: U44M1I210 means failed to extract the downloaded ZIP file of update.
    Please follow the instructions specified on following kb doc and see if it helps -
    http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    Let us know if it does not solve your problem.
    Regards,

  • Task sequence fails after upgrading to 2012 R2 and MDT 2013

    After upgrading to 2012 R2, my task sequence fails after the Setup Windows and ConfigMGR & Restart Computer. Instead of continuing to run the task sequence and load up the MDT Toolkit Package, it just stops at the Windows 7 login screen.
    Do I need to create new toolkit & settings packages with MDT 2013 settings? Or do I just need to create a new task sequence?
    I can't figure out what log to look at on the VM that I am imaging. If someone can point it out maybe there's some useful information. Thanks.
    My task sequence

    It sounds a lot like that it could be failing at the client installation. Please take a look at the client installation logs.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude
    Here are the log files from c:\windows\ccmsetup\logs .. I took a glance and things run with success 0 which should mean no error right? The system also has the client installed with the CU2 patch.
    Client Logs
    Searched a bit online and people are saying it's due to the incorrect boot image. I was using a WinPE 5.0 I created on this TS but I'm going to make another and see where it goes.
    This was the solution.

  • Cannot print a PDF file after upgrading to Windows 8.1

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

  • After upgrading to windows 8, spectre 14 usb3 slow

    are there any usb3 fast drivers for spectre 14 after upgrading to windows 8, the drivers of windows 7 there are not compatible with windows 8

    Hello rumbacha.  I understand you're trying to locate some drivers for your SPECTRE for Windows 8.  
    There are quite a few versions of the SPECTRE so I will need your product number to identify exactly which model you have.  This document can show you where the product number is located.
    Once I have this I will attempt to locate the drivers for you.
    Have an excellent day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

    after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
    Although IE11 works, it doesn't work correctly.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After upgrade to Windows 8.1, ipod nano 7th gen not recognized

    /after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen.  I have uninstalled and reinstalled ITunes but no luck.  I have gone through all steps in troubleshooting, but it still doesn't recognize it.  Help!

    Hi cindywindy,
    If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4

    I have a group of 6 unit tests failing after upgrading to the new Kodo
    4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
    exceptions like the one at the bottom of this email. It seems to be an
    interaction with the PostgreSQL driver, though I can't be sure. I
    haven't changed my JDO configuration or the related classes in months
    since I've been focusing on using the objects that have already been
    defined. The .jdo, .jdoquery, and .java code are below the exception,
    just in case there's something wrong in there. Does anyone have advice
    as to how I might debug this?
    Thanks,
    Mark
    Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
    Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
    Testcase:
    testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
    Caused an ERROR
    The column index is out of range: 2, number of columns: 1.
    <2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
    range: 2, number of columns: 1.
    at
    kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
    at
    kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
    at
    kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
    at
    com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
    at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
    at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
    at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
    at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
    at
    edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
    at
    edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
    NestedThrowablesStackTrace:
    org.postgresql.util.PSQLException: The column index is out of range: 2,
    number of columns: 1.
    at
    org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
    at
    org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
    at
    org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
    at
    org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
    257)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
    at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
    at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
    at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
    at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
    at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
    at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
    at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
    at kodo.jdbc.sql.Union.execute(Union.java:326)
    at kodo.jdbc.sql.Union.execute(Union.java:313)
    at
    kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
    at
    kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
    at
    com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
    at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
    at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
    at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
    at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
    at
    edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
    --- DefaultUser.java -------------------------------------------------
    public class DefaultUser
    implements User
    /** The account username. */
    private String username;
    /** The account password. */
    private String password;
    /** A flag indicating whether or not the account is enabled. */
    private boolean enabled;
    /** The authorities granted to this account. */
    private Set<Authority> authorities;
    /** Information about the user, including their name and text that
    describes them. */
    private UserInfo userInfo;
    /** The set of organizations where this user works. */
    private Set<Organization> organizations;
    --- DefaultUser.jdo --------------------------------------------------
    <?xml version="1.0"?>
    <!DOCTYPE jdo PUBLIC
    "-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
    "http://java.sun.com/dtd/jdo_2_0.dtd">
    <jdo>
    <package name="edu.ucsc.whisper.core">
    <sequence name="user_id_seq"
    factory-class="native(Sequence=user_id_seq)"/>
    <class name="DefaultUser" detachable="true"
    table="whisper_user" identity-type="datastore">
    <datastore-identity sequence="user_id_seq" column="userId"/>
    <field name="username">
    <column name="username" length="80" jdbc-type="VARCHAR" />
    </field>
    <field name="password">
    <column name="password" length="40" jdbc-type="CHAR" />
    </field>
    <field name="enabled">
    <column name="enabled" />
    </field>
    <field name="userInfo" persistence-modifier="persistent"
    default-fetch-group="true" dependent="true">
    <extension vendor-name="jpox"
    key="implementation-classes"
    value="edu.ucsc.whisper.core.DefaultUserInfo" />
    <extension vendor-name="kodo"
    key="type"
    value="edu.ucsc.whisper.core.DefaultUserInfo" />
    </field>
    <field name="authorities" persistence-modifier="persistent"
    table="user_authorities"
    default-fetch-group="true">
    <collection
    element-type="edu.ucsc.whisper.core.DefaultAuthority" />
    <join column="userId" delete-action="cascade"/>
    <element column="authorityId" delete-action="cascade"/>
    </field>
    <field name="organizations" persistence-modifier="persistent"
    table="user_organizations" mapped-by="user"
    default-fetch-group="true" dependent="true">
    <collection
    element-type="edu.ucsc.whisper.core.DefaultOrganization"
    dependent-element="true"/>
    <join column="userId"/>
    <!--<element column="organizationId"/>-->
    </field>
    </class>
    </package>
    </jdo>
    --- DefaultUser.jdoquery ---------------------------------------------
    <?xml version="1.0"?>
    <!DOCTYPE jdo PUBLIC
    "-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
    "http://java.sun.com/dtd/jdo_2_0.dtd">
    <jdo>
    <package name="edu.ucsc.whisper.core">
    <class name="DefaultUser">
    <query name="UserByUsername"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
    WHERE username==searchName
    PARAMETERS java.lang.String searchName
    ]]></query>
    <query name="DisabledUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
    enabled==false
    ]]></query>
    <query name="EnabledUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
    enabled==true
    ]]></query>
    <query name="CountUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
    ]]></query>
    </class>
    </package>
    </jdo>

    I'm sorry, I have no idea. I suggest sending a test case that
    reproduces the problem to support.

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Can't print in PSE11 after upgrading to windows 8.1

    I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

    I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
    Tracy Ferreira 2607 Woodruff Rd.
    Suite E-126
    Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com  
          From: hatstead <[email protected]>
    To: Tracy Ferreira <[email protected]>
    Sent: Tuesday, March 10, 2015 1:58 PM
    Subject:  can't print in PSE11 after upgrading to windows 8.1
    can't print in PSE11 after upgrading to windows 8.1
    created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Ethernet LAN not working after upgrading to windows 8.1

    After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

    You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

  • Wifi problem of G560 after upgrading to windows 8.1

    Hi,
    I have a lenovo G560. After upgrading from windows 8 to windows 8.1, I cannot connect to wifi. I was wondering if someon else has the same problem.

    hi amardoukhi,
    Welcome to the Forums.
    Your issue might be similar to this thread. Try the solution that was posted to rollback to an older driver version.
    The solution was to:
    1. Open Device Manager (press WInkey+R > type devmgmt.msc)
    2. On the Device Manager, navigate to Network Adapters > right click on the wireless adapter and choose Update Driver Software
       - Link to picture
    3. On the Driver Update Window, choose Browse my computer for driver software >  Let me pick from a list of device drivers on my computer and choose the wireless card on the list.
       - Link to picture
       - Link to picture
       - Link to picture
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for