ADLSP stops sending REFCURSOR out params when one of the out params is null
Hi All,
I have a package that returns some params. One of the params is a REFCURSOR (Oracle). If an out param before it contains null, the refcursor is not shown in the ALDSP XML response.
Any ideas if this is a bug?
Thanks,
Daniel
If you have the same problem, then you need the same solution.
Open a case with Customer Support and ask for the patch on CR295750.
Similar Messages
-
When I send a group txt and one of the reciepients replies it creates a new message. How do I keep all the replies in the same message?
If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
I have OS X 10.9.2. and have downloaded Maverick. If I am sending an email message to one person, options for addresses from my Address Book appear. However if I want to send it to more than one person, the potential addresses for the other persons do not show. Can you please help?
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I want the title on the browser to change when one of the frames changes in the Frameset.
I am using frames (please don't tell me off!) and PHP.
I want the title on the browser to change when one of the
frames changes in the Frameset.
Normally the title of the browser comes from the Frameset,
But I am sure I have seen websites where the title changes
depending on one of the frames... how is this done?
CThen don't use frames.
> Normally the title of the browser comes from the
Frameset, But I am sure I
> have seen websites where the title changes depending on
one of the
> frames...
> how is this done?
Show us one and we'll tell you.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"colinwalton" <[email protected]> wrote in
message
news:epuu1t$kgv$[email protected]..
>I am using frames (please don't tell me off!) and PHP.
>
> I want the title on the browser to change when one of
the frames changes
> in
> the Frameset.
>
> Normally the title of the browser comes from the
Frameset, But I am sure I
> have seen websites where the title changes depending on
one of the
> frames...
> how is this done?
>
> C
> -
A site I need for consulting purposes (http://www.aegtelecom.com.pt/) requires an add-on known as “Intranet for Firefox”. When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site. However, being a steadfast Firefox user, I would prefer to use Firefox for this purpose.
http://www.aegtelecom.com.pt/contactos <br />
Have you tried contacting that web site's support department for help with that issue? <br />
If that web site can't find the add-on it says is needed, they need to fix that problem with their servers.
Or you can try using IE Tab2 to run IE in a Firefox tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/92382 -
Exchange not sending mail to the correct recipient addresses when one of the addresses is incorrect
Hi,
I am creating an email msg programatically and sending to the exchange server.
When all the recipient addresses are correct, the mail is sent successfully.
But if one of the addresses is incorrect, the server gives a "550 5.1.1 User unknown" error and theemail msg is not being sent to the correct addresses as well.
When this is tested via Outlook, the mail is sent to the correct addresses and there is an error mail from the server stating that the mail was not sent to the incorrect address, this is the expected behaviour.
What needs to be done to get the expected behaviour? There must be some alternative setting being used by outlook.Hi,
What you describe can happen if the AntiSpam Agents has been installed
and Recipient Filter Agent is enabled on Mailbox Servers.
Recipient Filter agent
Although the Recipient Filter agent is available on Mailbox servers, you shouldn't configure it. When recipient filtering on a Mailbox server detects one invalid or blocked recipient in a message that contains other valid recipients, the message is rejected.
From:
http://technet.microsoft.com/en-us/library/jj218660(v=exchg.150).aspx#Mailbox
Martina Miskovic -
on my iMac, when I view messages there is a grey number at the top of the message. This number denotes the amount of messages from that sender and when I view the most recent message in my mailbox (from that sender) all of the older messages load with it and this takes a while for the message to become moarked as "read." I know that I can turn this off because I have mountain lion on my air and i do not have this issue. how can i turn it off?
thanksthanks so much, that fixed it! before I posted this quiestions I kept looking in the mail preferences but I dind't think to look on the View menu.
-
Can't send external e-mails when one of Exchange servers is disabled
Hello all,
I have Edge transport server 2013
Also there are 3 Exchange servers installed
Ex01(Exchange 2010)
Ex02(Exchange 2013)
Ex03(Exchange 2013)
In the near future I will migrate all Databases from Ex01(Exchange 2010) and dismout the server and there will be Ex02(Exchange 2013) and Ex03(Exchange 2013) servers only
For now everything is working well, incoming/outgoing e-mails etc. but when I disable Ex01(Exchange 2010) I cannot send any external e-mails from mailboxes which located in Exchange 2013 servers(no problems with receiving e-mails appear)
When look in the queue of Exchange 2013 servers I can see all e-mails which got stuck in the queue.
What might that be? Please, help to resolve the issue.Hi,
As Hinte mentioned, it seems that you have a send connector configured for Outbounding on Ex01 only. If you disable Ex01, Outbound should be disabled.
Please check whether you have other send connectors configured on Ex02 and Ex03 for Outbounding.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support -
had ipod touch set up with icloud advised after purchasing another ipod and iphone to put all on same icloud account which has been great. Now one of the ipods has stolen, icloud found it and located it. trouble is now every e-mail is sent to all devices and i cant think of a way to keep track of the stolen one without deleting account. i need to get this ipod back as it was bought for someone special and wants it back. dont want to claim from home insurance. Also they were all set up with same apple account. I can face time the ipod but does it ring on all?
thanxI have phoned the police, they were very helpful and sent one police car to address of where the stolen one is suppose to be and anouthe police to my home address in the hope that when we send messages through icloud that the police can hear it. unfortunatly i dont know if both ipod are ringing. every e=mail ie this one also goes to both ipods.because they are both on same icloud and apple address. how can i still keep track on stolen ipod and change icloud id on the replacement.
-
Unable send request, you are not one of the possible agents
Hi,
I am trying to configure workflow for leave request, for my requirement i have to do some modifications to stadard workflow(12300111), so i copied it and made configuration settings in spro also, but when i create a leave from PTARQ transaction
workflow is not getting created.
when i debugged it, i got amessage saying 1) unable send request 2) you are not one of the possible agents
Is there any other stting i have to do??
Thanks,
Krish.Hi Kishore,
Please check below things.
1. In the SPRO, have you maintained your workflow Template against the required leave type.
2.Use CTRL + F2, and check is there any error in your workflow. Also check whether it is active or not.
3. Check the workflow agent assignment in Basic data. It should be General Task.
Thanks. -
is their any way to stop an iphone 4s from using data when i hit the 2gb limit on verizon wireless this way i dont have to pay the fee for extra data
thank youDon't know of any way for it to happen automatically, but you can still use the phone and send/receive sms with cellular data turned off.
-
Behavior when one of the instance is down
Dears,
We have a reporting server(IBM Cognos BI) using Oracle RAC as the data warehouse. Cognos uses OCI to communicate with Oracle database(Oracle client is installed with the cognos server machine). Cognos only issues SELECT statements to the database.
This is our tnsnames.ora file looks like
${DB_NAME}=
(DESCRIPTION=
(ENABLE=BROKEN)
(LOAD_BALANCE=off)
(FAILOVER=on)
(ADDRESS=(PROTOCOL=tcp)(HOST=${VIP1_IP})(PORT=11521))
(ADDRESS=(PROTOCOL=tcp)(HOST=${VIP2_IP})(PORT=11521))
(CONNECT_DATA=
(SERVICE_NAME=${DB_NAME})
(FAILOVER_MODE=(TYPE=select)(METHOD=basic))
(server = dedicated)
As to TYPE=SELECT, it is said that if the instance on which the select statement is being executed is down, one of the available oracle instances will take over as nothing has happened. The failover is transparent to the application(Cognos). http://www.dba-oracle.com/art_oramag_rac_taf.htm
But when we manually shutdown an instance , we did not see the result as expected while get the following:
ORA-25402: transaction must roll back
Cause: A failure occured while a transaction was active on this connection.
Action: The client must roll back.
So, it looks like if application wants to take the advantage of this functionality, the application must be modified to do something related to transaction termination, Right? If so, like a product as Cognos, not a project, it could not do things specific to a particular database.
Any suggestion is welcome.
Ricky
Thanks,HI,
Please check your configuration as per below link.
http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
FAST CONNECTION FAILOVER
Fast Connection Failover (FCF) is a packaged implementation of FAN included in Oracle Application Server 10g. In the event of a failure, it will act on the FAN event, clean up stale connections, and pass the notification to the application as a SQL exception. The application can then retry the connection and replay the transaction. It works with JDBC connection pools, and is not dependent on OCI or TAF. Thus, you can use FCF with both the thin JDBC driver as well as the thick (OCI) JDBC driver. Oracle does not recommend the use of both TAF and FCF with the same application. -
Group delivery for BOM's when one of the BOM component has no confirmed qua
Hi,
We have an issue. We have group delivery for BOMs. However it might be in some cases that one of the component has no confirmed quantity. Still we do not want delivery for any of the component to be created. What is the easiest way to achive this?
thanks in advance.
regards CamillaHi Camilla,
In VOV7 for the item category of main item Create Delivery Group must be assigned a value X (Form delivery group with one delivery date). If you have this configuration set-up done system will assign one delivery group for the entire group of BOM materials and all will be delivered on the same date. Can you check this? -
I have the monthly calendar on screen, click the more button, click print. Another window pops up and when I click the print button nothing happens. I am using Firefox 19.0 and Adobe Reader 10.1.6. The print function works in IE and Chrome.
this solution did NOT work for me. I still cannot print a Google calendar page in Firefox. I can in IE. And I can print Gmail.
-
How to stop PSE9 from starting automatically when I turn the computer on.
I'm running PSE9 on a imac 10.8.2
I'm not sure why but PSE has just started opening up when I turn the computer on. How do I change this prefernce?
Thanks
TaraIt could be that you have Restore Windows turned on system preferences>General. If that's not it, go to system preferences>users and groups>your account>log in items and make sure it's not in there.
Maybe you are looking for
-
Metadata not showing in Bridge
Until last week I was happily using Bridge with my picture captions and credits showing in the metadata window. Now all of a sudden they've gone. The metadata panel only shows the content of the Title field. The metadata is still there when I open 'f
-
Batch determination process in SD- Delivery: any Function module?
Hi All, I want to use the logic used in SD-Delivery for batch determination in Batch Search Strategy report. Is there any function module avaialable for batch determination process done in SD so that I can make use of it? Thanks in advance, Rgds, MAd
-
How to lock a specific text message so it wont be deleted
I would like to lock a specific someoen sent me but if i delete the rest of the the thread i wont that line will still be there. I used to do it on androind phone wasnt sure if iphone could do that as well.
-
Reading/Writing multiple files
Hey, I've got a folder on my computer with 100+ text files. So I'm trying to make a projector that, once I've chosen a directory, will go through all the files in that folder looking for a certain string. I know how to use the FileXtra4 to set the di
-
WRT160N installed - lost file sharing capability
Upgraded from Linksys WRT54GS to WRT160N - All computers conect to Internet but cannot communicate with each other - no file sharing, no printer sharing.