ADM template for office and AD - Group policy

Hi,
I need to enforce English (UK) as the editing language in office application (2010 & 2013).
I have downloaded the ADM template saved it on C drive on the AD server.
Then I loaded the ADM template for office to a GOP which I created on test basis and added an AD user to it.
On the template I enabled the setting for primary editing language as English (UK) .
on the client side , when I open an office application eg outlook or word, I can still see English (US) as the set language.
what am I doing wrong ?
also how do I use the ADMX template ? because when from the GPO editor I try to browse add the its template the window show blank.

Hi,
From Windows 2008 R2, the current version of Administrative Template files are ADMX files. The GPMC displays these settings under the Administrative Templates node. 
However, the GPMC still recognizes ADM files and displays these settings under the Classic Administrative Templates node, which is a child node to Administrative Templates .
Checkout the below link on installing ADM files,
Add or Remove Classic Administrative Templates
Checkout the below on adding the Office 2010 ADMX files in to GPMC,
Adding the admx files from Office 2010 admin templates into your GPMC
Regards,
Gopi
JiJi
Technologies

Similar Messages

  • ADM templates for office 2003 on Windows server 2012

    Hi Guys,
    i am planing to upgrade from server 2003 to server 2012 but we will still be using office 2003.
    Can i install office 2003 adm templates on server 2012?
    Many thanks for your help
    Theo

    yes, the template can still be installed in the policy store or on a computer running gpmc and added in on 2012.
    they will process fine
    although on a side note I think office 2003 is out of support - or due to be - so you might want to look at upgrading that too in the near future.
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    My Blog
    LinkedIn:

  • Mail for exchange and domain group policy removing...

    Hi,
    I currently administer 2 domains,  both server 2003 with exchange 2003.  On the one domain I can configure any of our e series ( e51/e71/e72/e6) via MFE and permanently accept the untrusted SSL certificate. When I configure MFE to our other domain the option to accept the untrusted certificate has vanished..!
    Anyone have any ideas?  I'm sure that it's a group policy setting but I cannot spot it!

    turbominor wrote:
    No certificates have been generated bar the ones that exchange installed by default
    Hmm, I don't recall ever realizing that.  Lol.  In that case, what are you using as a root certificate?  Nothing...which explains why the cert is untrusted?  (As connections to your first Exchange server work normally, apparently you don't need a root cert for a secure connection?)  I used to get mine from http://www.cacert.org/ and installed the root cert either manually or through a device management server.
    I wasn't completely sure where I was going with my question, but just did a few web searches.  Apparently Symbian phones don't like installing self-signed certificates. "Accepting a certificate permanently" does install the cert, although I'm not sure that's quite the same thing.  You might skim http://discussions.nokia.com/t5/Eseries-and-Communicators/E72-Email-Accept-Certificate-Permanently/m... in case any of that is relevant.

  • Where is SALES OFFICE and SALES GROUP for BP stored?

    Hello,
    Does anyone know where (in which table, or is there a Function Module to retrieve data) the SALES OFFICE and SALES group which is displayed in the Business Partner master data is stored?
    Thanks!
    Jeroen

    Hi Jeroen,
    Check the sales area data of the Business partner and go to tab Organization. You will see the sales office and sales group there.
    In order to activate the sales area tab in BP transaction you have to select the BP role Sold-To party.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Deploying Office 2013 with Group Policy

    I would like to deploy Office 2013 using group policy. I am new to group policy so am looking for some advice and guidance on the best way to deploy. I would like to deploy with no interaction with the user but yet display a message so that they
    know not to open Office. I would also like to create a custom registry setting so that if I need to re-install, all I have to do is delete the registry setting. I have tried a group policy for installing with OCT  settings (Basic, Suppress
    Model checked, No Cancel checked, Completion Notice checked) and modifying the Config.xml (<Display Level="Basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />) but I can not get it to display
    the installer screen so that users know it is installing. It does display the screen when running the setup.exe manually. I have a setting in the OCT that creates the registry setting and that is working correctly. My group policy is set to run the
    below bat file at startup in the Computer Configuration.
    setlocal
    REM *********************************************************************
    REM Environment customization begins here. Modify variables below.
    REM *********************************************************************
    REM Get ProductName from the Office product's core Setup.xml file, and then add "office15." as a prefix.
    set ProductName=Office15.Standard
    REM Set DeployServer to a network-accessible location containing the Office source files.
    set DeployServer="\\xxxxxx\setup.exe"
    REM Set LogLocation to a central directory to collect log files.
    set LogLocation=\\xxxxx\Logfiles
    REM *********************************************************************
    REM Deployment code begins here. Do not modify anything below this line.
    REM *********************************************************************
    IF NOT "%ProgramFiles(x86)%"=="" (goto ARP64) else (goto ARP86)
    REM Operating system is X64. Check for 32 bit Office in emulated Wow6432 uninstall key
    :ARP64
    reg query HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432NODE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
    if NOT %errorlevel%==1 (goto End)
    REM Check for 32 and 64 bit versions of Office 2013 in regular uninstall key.(Office 64bit would also appear here on a 64bit OS)
    :ARP86
    reg query HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
    if %errorlevel%==1 (goto Office) else (goto End)
    REM If 1 returned, the product was not found. Run setup here.
    :Office
    %DeployServer%
    echo %date% %time% Setup ended with error code %errorlevel%. &gt;&gt; %LogLocation%\%computername%.txt
    REM If 0 or other was returned, the product was found or another error occurred. Do nothing.
    :End
    Endlocal
    Any advice or guidance would be greatly appreciate on how to get a pop up message while software is installing or if there is a better way to deploy.

    > but I can not get it to display the installer screen so that users know
    > it is installing. It does display the screen when running the setup.exe
    > manually. I have a setting in the OCT that creates the registry setting
    > and that is working correctly. My group policy is set to run the
    > below bat file at startup in the Computer Configuration.
    Check http://gpsearch.azurewebsites.net/#2308 - if this is enabled, you
    will not be able to show "anything" in startup scripts...
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Bitlocker and MBAM Group Policy

    I am in the process of setting up Bitlocker on all office computers, use an MBAM server to store the keys and to use group policy to manage it. I have setup a server with MBAM and installed MBAM client software on a test computer. But while configuring
    group policy, I'm a little confused. Under Computer Configuration there are settings for both Bitlocker and MDOP MBAM and they are more or less the same. Which one do I use or do I use both?

    Hi,
    Please check out these links:
    How to Edit MBAM 1.0 GPO Settings
    http://technet.microsoft.com/en-us/library/jj571495.aspx
    Planning for MBAM 1.0 Group Policy Requirements
    http://technet.microsoft.com/en-us/library/jj571500.aspx
    Tracy Cai
    TechNet Community Support

  • How to restrict Sales office and Sales Group.

    Hi All,
    I want to restrict the users from changing the sales office and sales group in the sales order.
    Is there any standard way to achieve this or do we need to do with User exit??
    Please help.
    Thanks,
    Pavan.

    hi
    there is no standard settings for estrict the users from changing the sales office and sales group in the sales order
    so you have to write the logic in userexit
    DATA: lt_user_list   TYPE STANDARD TABLE OF tvarvc,
           lw_user_list   TYPE tvarvc,
           lr_user        TYPE RANGE OF syuname,
           lw_user        LIKE LINE OF lr_user.
    IF screen-name EQ ' VBAK-VKBUR' and   VBAK-VKGRP.
    * IF sy-tcode EQ 'VA02'.
    **Get list of users who are allowed to change SO - only they can change payment terms
         SELECT *
           FROM tvarvc
           INTO TABLE lt_user_list
          WHERE name = 'ZSD_VA02_ALLOWED'
            AND type = 'S'.
         IF sy-subrc = 0.
           LOOP AT lt_user_list INTO lw_user_list.
             lw_user-sign = lw_user_list-sign.
             lw_user-option = lw_user_list-opti.
             lw_user-low    = lw_user_list-low.
             lw_user-high   = lw_user_list-high.
             APPEND lw_user TO lr_user.
             CLEAR lw_user.
           ENDLOOP.
    **    If user is not in the users listed for change allowed
           IF sy-uname NOT IN lr_user.
             screen-input = 0.
           ELSE.
             screen-input = 1.
           ENDIF.
         ENDIF.
       ENDIF.
    ENDIF.
    go to STVARV t code here you check the NAME and give the user ids who need to change

  • Sales office and sales group are not copied from quotation to sales order

    Hi All,
    I have maintained sales office and sales group in quotation maually at header level.while  coping to sales order sales office and sales group are missing.
    Please let me know what would be reason for missing those twoand whether i should check anything in copy controls.
    Regards
    Mohan

    As its a standard functionality to have the Sales Group & Sales Office from Quotation to Order. But in your case, check the Copy Control settings at Header Level .
    DataT 051 General header data       Copying requirements 001 Header-same customer
    DataT 101 Header business data
    DataT 001 Partner header
    In case , they are also same, then check if any Logic is added in the Existing Routine.
    Best Regards,
    Ankur

  • How to add sales office and sales group code in Badi Order_Save?

    Hi,
    i have a requirement .
    the concept is like this ,we have S>D>G lay out.
    initially the sales office and sales group were fetching  values from "G".
    But my requirement is the sales office and sales group should fetch values from "D"..when the transacion is "ZGRW"..
    This is in CRM platform...So how shud i assign values of D to sales office and sales area??
    how to code this...
    help me out
    Edited by: VARUN VADNALA on Jun 25, 2009 1:35 PM

    Hi Sangeeta,
    As per your statement, my understanding is that the Organization Attributes are not maintained in the Customization. If all the values are properly maintained then based on the Organization Data determination, the system would have picked up the data. You can first check the Organization Structure and see all the attributes are properly maintained or not and then check whether the Object Permitted in determination checkbox is checked. Then create a Transaction and see that all the Organization data are getting filled properly.
    Have a look at the following link for a complete guide to the Organization data determination customization.
    http://help.sap.com/saphelp_crm70/helpdata/en/6d/5c1738453fde16e10000009b38f8cf/frameset.htm
    If the Organization data customization is not meeting your requirements then you can have a second look at the development approach. Then we can have a look at the available Objects to get the desired functionality.
    Hope this helps.
    Thanks,
    Samantak.

  • How to authorization sales office and sales group in VA21 and VA01 t-code

    I need to authorization sales office and sales group in va21,va22,va23 and va01, va02, va03 to control users access the sales order.
    I found some articles how to resolve this problem.I have created new authorization object Z_VBAK_ VKO, and add these fields to the object: VKORG: Sales Organization, VTWEG:Distribution Channel, SPART: Division, VKBUR:Sales Office, VKGRP: Sales Group, AUART:Sales Document Type, ACTVT:Activity
    I have add the object Z_VBAK_VKO to va01, va02, va03 in SU24 translation.
    I test the authorization , but fail, va01 and va02 do not check the authorization.
    Why? what can i do? please help me .
    thanks

    Dear Wu
    I think you are using the concept of Master Roles and Derived Roles.If ur using then create a master role and derived role for the authorisation group you want. And in the derived role assign the specifics to the respective logins ID. If you want to attach the authorisation to the T-Codes Va01 or VA21 etc then you have to use Exit.
    Correct me if i am wrong.
    Regards
    Jyotsana

  • How to download ECC customers without Sales Office and Sales Group values

    Dear all,
    In SD Customer master record we enter Sales Office and Sales Group fields under Sales Area tab-->Sales Tab.
    While downloading customers form ECC to CRM, How can I exclude this Sales Office and Sales Group Data from the download.
    I want to download customers without this sales office and Sales group data...Kindly suggest me how can I do this.
    Your suggestions will be highly appreciated.
    Best regards
    Raghu ram

    Hi Chandrakanth,
    I have removed 'Object Permitted in determination' checkbox for all Sales Offices, but still the problem persist.
    I am getting following problem in SMW01 while downloading customers.
    "Sales office O 50000004 sales group O 50000057 not maintained for sales area O 50000001 C5 Z0
    Message no. CRM_BUPA_FRG0140204."
    This problem is coming for all customers, so I though of excluding Sales Office and Sales groups from downloading.
    Can we use Filters functionality for this, if so what sort of settings need to be maintained for Customer_Main object in R3AC1 transaction.
    Please suggest, your suggestions will be highly appreciated.
    Best regards
    Raghu ram

  • Sales office and sales group in STO scenario

    We need to populate the sales group and sales office in intercompany billing originating from a STO (PO>STOdelivery>IV invoice). However, the sales office and sales group is blank despite both the customer masters of both plant customer (shipto) and Intercompany Payer (ininvoice) containing this. Wanted to understand any configaration settings for these or Userexit is the only option
    regards
    Nagappa

    If you can, try & maintain the Sales Office & Sales Group in sold to party.
    But as per my knowledge in billing you can only find Sales district.
    Regards
    JP

  • Sales office and sales group and sales district

    what is the difference between Sales office and sales group and sales district,
    please explain,
    Thanks

    hi
    sales office
    A organizational unit in a geographical area of a sales organization.
    A sales office establishes contact between the firm and the regional market.
    sales group
    A organizational unit that performs and is responsible for sales transactions.
    sales district
    A geographical sales district or sales region.
    You can assign customers to a sales district and use the sales district to generate sales statistics.
    regards

  • Sales office and sales group should greyed out..

    Hi All,
    I have a requirement here where the sales office and sales group in sales order should  greyed out once billing is done for the sales order.
    Kinldy suggest how can we achieve this.
    Thanks,
    Pavan.

    You can use program MV45AFZZ and USEREXIT_FIELD_MODIFICATION
    more information is here.
    https://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm

  • Sales Office and Sales Group cannot be changed

    Hi folks,
    when i create a sales doc. based on a billing doc./sales doc.,  the sales units - sales ortgn, dist. channel, division, sales office and sales group are copied onto the newly created doc.
    Sales orgtn, distr. channel and division are coming in grey mode or in disable mode which cannot be changed.
    But Sales office and sales group are changeable..
    Is there any way to make these two fields i.e Sales Office and Sales Group  also in grey mode / disable mode or unchangeable mode.
    thanx in advance,
    Sourav

    hello, friend.
    try using SHD0 to create your own screen variant for the sales order.  just follow the on-screen instructions.  look for Sales Office and Sales Group (if any) and check the box making manual entries not possible.  after you save the variant, assign this to your order type and test.
    regards.

Maybe you are looking for