ADMDialog/iFontProblemWarning=The Adobe UI font could not be loaded

I have been getting this error in a pop-up box every time I start Photoshop CS6 - I acknowledge the error (click OK) and startup completes with no further problems I have looked for solution on the web to no avail (I've chased a few red herrings reinstalling ADMxxx fonts with no success).I have just now removed (moved to a safe location) the "ADM" folder from the Photoshop plug-ins list and error goes away. I understand ADM is Adobe Dialog Manager but can I live without it or should I attempt to fix it?

Have the same problem and fixed it the same way. Maybe an additional information: I am running Win8 and the error message came up right after a had the latest Windows update. Or are you a happy Mac user??
On some forums the rumour is spread, this has something to do with the amount if fonts installed in the OS. Nevertheless I had no fonts installed (or removed) between the last flawless start of Ps CS6 Ext and the upcoming error message. Just the Windows update ...
Would be nice if we had some respons from Adobe on this...

Similar Messages

  • The Adobe PDF Maker could not be loaded

    With Acrobat 9, XP and Office 2007...
    When in Word 2007, I click  "Adobe" on the toolbar to convert the Word file to pdf. However, when I do this, I get the message "The Adobe PDF Maker could not be loaded" and am given the option to run Repair Mode.
    The conversion works fine from Print|Adobe pdf but this takes away some of the convenience of using the program.
    I've run Repair Mode and no change in results. I've uninstalled and reinstalled Acrobat. Any other suggestions?
    Thanks.

    Doubt this is the problem, but it might be worth a check. In past versions of OFFICE, you sometimes had to allow PDF Maker as a trusted macro. Haven't heard about the problem with AA9, but it might be a possibility.

  • Adobe 9.4.5 Pro "The Acrobat PDFMaker Server could not be loaded"

    I am running Office 2003 SP3.
    When I try to create a pdf ( Version 9.4.5 ) either from Excel or Word , I get the above message.
    Any help is much appreciated. Thanks in advance.

    Thank you very much , Mike
    I did repair and re-started the pc.
    It still gives the same error message "The Acrobat PDFMaker Server could
    not be loaded"
    Best Regards !

  • The Acrobat PDFMaker Server could not be loaded

    Hi All, Using Acrobat 8 pro on xp system inc Office 07. Suddenly today i am unable to create a PDF from any doc unless using PDF printer option. My COM add in tabs vanished. I have uninstalled booted etc then reinstalled no change. I have also run the installer in repair mode, no joy. I have managed to recover the COM add ins from the disabled option for all my windows progs such as word etc but all come up with the warning " The Acrobat PDFMaker Server could not be loaded" This also counts for creating a PDF direct from the PDFMaker opening page. Any ideas anyone as i believe the problem lies with Acrobat rather than the windows components.

    "PDFMaker server could not be loaded"
    I just did the following to my xp, office 2003 system
    1. updated to sp3 again
    2. update to .NET on most recent version
    3. deleted blocking of old formats such as old ppt, dbf etc on office 2003
    4. put patch for 2007 read on 2003
    5. uploaded Adobe 8.0.1.2
    6. then tried to used pdf maker and got the deadly: "PDFMaker server could not be loaded"
    7. then went through usual suspects of reloading, removing and then reloading, etc, even redid the dlls, no use
    8. if this seems to be as wide spread a problem as it appears on the web boards would one not think adobe in the kindness of its heart would fix it
    9. i can print to pdf and it is editable
    10. the adobe convert logo is now missing when i look at the files on windows explorer and right click, so somehow the upgraed washed out all functions
    11. well at least it worked for a few days, better than microsoft, but you guys are catching up fast
    12. in my companies i tell my people, if all else fails listen to the customer! it works

  • The database DLL 'crdb_oracle' could not be loaded.

    I have built a .net 2.0 website that is using Crystal Report Viewer with an Oracle 10g Database. All works well on my local machine but when deployed to the web server I get the following error:
    Failed to load database information. Details: The database DLL 'crdb_oracle.dll' could not be loaded. Error in File C:\DOCUME1\DMTEST\ASPNET\LOCALS1\Temp\test {BB80E9A1-92CE-402D-A52A-47ECE4330794}.rpt: Failed to load database information.
    I have run the Crystal Reports for .Net Framework 2.0 setup and have located the 'crdb_oracle.dll' file in the C:\Program Files\Common Files\Business Objects\2.7\Bin directory. Am I missing a step in this process.
    The Web Server is a Windows 2000 box.
    Thank,
    John

    I am having a similar problem.  However, I do not have CR installed, but want to use only CR from within VS 2008 and deploy a ASP.NET reporting app to IIS.  If I create a simple report with no parameters it will run fine in both VS and IIS.  However, if I add a parameter to the report such as UserId={?Parameter1} then on execution, the report will prompt for the parameter and then throw this error, "The database DLL 'crdb_oracle' could not be loaded."
    I have added full privileges to the ASP.NET, IUSR, and IWAM for the Oracle folder.  I also search the hard drive and find only one OSI.dll and no crdb_oracle.dll.
    Can you tell me if my scenario is supported with VS 2008 only?
    I am connecting to the DB like this:
                ConnectionInfo connectionInfo = new ConnectionInfo();
                connectionInfo.ServerName = "Driver={Microsoft ODBC for ORACLE};Server=localhost;Port=1521;";
                connectionInfo.DatabaseName = "dev";
                connectionInfo.UserID = "...";
                connectionInfo.Password = "...";
                TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
                foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
                    tableLogOnInfo.ConnectionInfo = connectionInfo;
    Thank you,
    Travis

  • The class or interface could not be loaded...?

    I'm doing a simple link code. I've tried many diferrent ways to do this but this error keeps comming up saying The class or interface could not be loaded...
    home_btn.addEventListener(MouseEvent.CLICK, gotoURL);
    function gotoURL(event:MouseEvent):Void
    navigateToURL(new URLRequest("my site"));
    This is the most recent method I've tried in doing this. I've tried changing the publishing settings of the document to and from Action Script 3.0- using an import command. But thats too complicated. I know this is simple... but can anyone please help?

    Thanks, but whenever I change the publish settings back to As3 the flash tween gets caught in a loop and it doesn't end, it just re-runs the swf over and over again. I'm not sure how to fix this problem now.
    I even tried to add a stop(); at the beginning of the new script.
    stop();
    home_btn.addEventListener(MouseEvent.CLICK, gotoURL);
    function gotoURL(event:MouseEvent):Void
    navigateToURL(new URLRequest("http://www.knirv.com"));
    I'm still getting an error message saying "1046: Type was not found or was not a compile-time constant: Void."...However, I'm sure your advice to upload to my server will solve this. Much thanks for the expertise

  • The specified cache entry could not be loaded during initialization

    The OBIEE server is failing every few minutes of working.
    I saw in the NQServer.log:
    The specified cache entry could not be loaded during initialization.
    Cache entry, '/home/oracleadmin/OracleBIData/cache/NQS_rprt_734086_39693_00000001.TBL', is invlaid due to either non-existing file name, size does not match, exceeding maximum space limit nor exceeding maximum entry limit, and it's been removed.
    I checked the directory and there is no space limitation.
    Can someone please clarify?
    The server/Config/NQSConfig.INI is as follows:
    [ CACHE ]
    ENABLE = YES;
    DATA_STORAGE_PATHS = "/home/oraceladmin/OracleBIData/cache" 2000 MB;
    MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
    MAX_CACHE_ENTRY_SIZE = 1 MB;
    MAX_CACHE_ENTRIES = 1000;
    POPULATE_AGGREGATE_ROLLUP_HITS = NO;
    USE_ADVANCED_HIT_DETECTION = NO;
    MAX_SUBEXPR_SEARCH_DEPTH = 7;

    It's more than enough if you are using it for .tmp and .tbl files storage. Have you checked work_directory_path in NQSConfig.ini file .Is it on diffrent mount point.Usually we wil create a seperate mount point and use that as storage location.
    b. Instead of using SAPurgeAllCache() , can I add shell script which delete the files fromt the cache directory and the execute run-sa.sh?You need to understand diffrence between OBIEE rpd cache and .tbl and .tmp file. SAPurgeAllCache() will purge cache from RPD.It wont purge .tmp or .tbl files.These files will be stored in some physical location.When a report start executing .tmp file will start evoluting and after execution of report it will be purged by OBIEE server automatically.
    see this blog for some insight into this topic
    Re: TMP Files uneder /OracleBIData/tmp
    Regards,
    Sandeep

  • The common language runtime could not be loaded.

    The common language runtime could not be loaded error in receiving while opening excel file in windows 7.

    Hi,
    Is this problem just occures when opening excel file? How about other office program?
    Did you make any change to your Office, such as install language package, etc. that may cause this problem?
    Since your problem is specific with Office program, it would be better to provide your question at Office Forum.
    https://social.technet.microsoft.com/Forums/office/en-US/home?forum=officeitpro
    Roger Lu
    TechNet Community Support

  • PDFMaker Server could not be loaded

    When I try to create an Acrobat Pro 8 file from within Word, I get an "Acrobat PDFMaker" dialog saying "The Acrobat PDFMaker Server could not be loaded. Do you want to run the installer in repair mode?"
    Cannot find this error in the KB.
    I have already reinstalled CS 3 twice tonight. It's not working.
    How can I get Acrobat Pro to work inside Word?
    Rig:
    Vista Ultimate 64 bit SP1
    Intel Core i7@ 920 2.67Ghx
    12G RAM, 1T hard disk with 900G available
    Adobe Creative Suite 3 Design Premium

    Hi all,
    The information found in this link helped me to resolve the problem in minutes:
    http://www.tech-archive.net/Archive/Office/microsoft.public.office.misc/2008-04/msg01538.h tml
    Please let others know how you fixed your problems - the more possible solutions the more uptime!
    Wordsmith2000

  • "PDE bundle could not be loaded," HP 7510 All-in-One​, Mac OS X 10.9.5

    The selection "PDE" in the print dialogue box is listed with a strikethrough.
    Choosing PDE displays the message "This bundle could not be loaded because the required components could not be found.  Contact the bundle's creator ... for the newest version. HP PDE 4.6.0."
    Haven't been able to find HP PDE download.
    Any help appreciated.

    You need to download the full Mavericks installer from the AppStore.  You need an Apple ID and you must claim the OS in your account.  If you are already running 10.9.5 it will tell you so.  Opt to download anyway.  Inside the installer is the InstallESD.dmg. 
    However, this is an installer, not a "clone-able" image.  If you are looking to make a clone, then boot from the Recovery partition and opt to reinstall the OS fresh.  Or better yet, get an external drive and install Mavericks to the drive.  Then add all your software and customizations that are not user or device specific.  Once done, you can then capture a DMG can can be used to image other systems.
    Reid
    Apple Consultants Network
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
    Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

  • MapPoint Control 11 in Labview Container = Control could not be loaded

    I am working with Labview 6.1 to create an application using a "Microsoft MapPoint Control 11.0" ActiveX component. When I first create a container for it, I can insert the component and it will load and operate correctly. However, after closing the vi and reopening it, the container says "Control could not be loaded", and I need to re-insert the object to get it to work each time. I will need to compile and run this at some point, so I need to fix this problem or ditch Labview now. I have tried reinstalling Labview runtime and the MapPoint Application, but this does not fix the problem. Working with MapPoint as an automation object (without a container) seems to work ok, but I need interactive control through the container. Any suggestions?

    Ankita--
    Yup. Tried that one, as a search of the NI site comes up with reinstall and register as the only solutions for "control could not be loaded" errors ... but it didn't make a difference for me...
    Odd to think that it can run fine right after the control is loaded, but after save/close/reopen, it's not working... hmmm.
    --Brent

  • Classs (Bean.HelloRemote) could not be loaded.

    I got the following error while trying to deploy an ejb.
    "The classs (Bean.HelloRemote) could not be loaded.Please consult online help for assistance in setting up the class root directory and choosing class files."
    What to do?

    Think you do not have a main method to get your
    app executed.

  • ActiveX control "could not be loaded"

    G'Day everyone,
    I'm having a problem with my activeX controls (SHDocVw.IWebBrowser2 for example) - when I load and run a LabVIEW 6i VI with an ActiveX container on the front panel, I get an error 97 (Unknown System Error in Untitled.vi) out of its method node. If I load the same VI into LabVIEW 6.1, I get the same error, and the container has "Control could not be loaded" written in it. This isn't just limited to the web browser control, but others too. (they used to work a week or so ago, and I can't think of anything I've done to the system since then...) If anyone has any ideas on how to fix this, I'd really appreciate it!
    cheers,
    Christopher
    Christopher G. Relf
    [email protected]
    Int'l Voicemail & F
    ax: +61 2 8080 8132
    Aust Voicemail & Fax: (02) 8080 8132
    EULA
    1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
    2) This email has NOT been scanned for virii - attached file(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
    3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

    Unfortunately, it was *all* of my ActiveX controls that wouldn't load. That said, A user of the Info-LabVIEW list came up with the answer: reinstall the RunTime engine - wierd....
    thanks,
    Christopher
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Class could not be loaded

    Appserve says it cannot load the class.
    It sya some problem with class directory and choosing class file

    Hi
    I am having the same problem. It occurs for me whilst creating an EJB and adding the contents. All the classes have been compiled correctly but it says...
    The Class (<<Class Name>>) Could Not Be Loaded
    Please consult the online help for assistance in setting up the class root directory and choosing class files.
    Thanks

  • LR4 Problem: The file could not be edited because Adobe Photoshop CS6 could not be launched.

    Is there a fix for this?  When I try to edit an image in Photoshop from Lightroom 4 (CTRL+E), Photoshop CS6 launches immediately but with no image.  In Lightroom 4, after about two minutes, the message box appears saying "The file could not be edited because Adobe Photoshop CS6 could not be launched."  When I click OK, the image promptly opens in Photoshop CS6 like normal.  This wan an itermittent issue for me after the LR4.1 release.  I was hoping that LR4.2 would help, but now I get the error every time.
    System
    Lightroom 4.2 x64
    Photoshop CS6 v13.0.1 x64
    Bridge 5.0.1.23 x64
    Windows 7 Pro x64
    AMD Six Core / 3.9 Ghz
    16 GB Memory
    NVidia Quadro 1 Gb Video
    Scratch space on three drives

    This may be a cooincidence, I starting having problems after I started using a Nikon D800, which has 36MP files.  LR4 released at the same time as the D800.  LR4 shows signs of struggling with the larger files, which are typically 280MB TIFFs for the D800, like freezing for several seconds when using an adjustment brush or going into a spasm with the crop tool.  Because Photoshop does not have similar large file issues, I'm doing more basic work in Photoshop, like cropping, dodge and burn, exposure adjustment, etc.
    Because Photoshop otherwise runs fine, and appears to read all the prefernes properly mid-issue, to get a better idea of what's going on, I turned on Process Monitor from Technet. For what it's worth, LR4 appears to touch the Photoshop preferences before it launches Photoshop.  LR4 must have a memory leak in that corrupts the Photoshop preferences file in a way that makes no difference to Photoshop.
    My weekend project is to try Capture One to see if I can spend more time on photography and less troubleshooting Adobe problems.  As it stands, LR4 is not usable for me.

Maybe you are looking for