Admin account does not have access to change a password in the CMC

We are on bo xi r2, and we are set up with Windows AD authentication for our users to log in with, but when I add an enterprise login for a user and I go to set the password, I get "You do not have permission to perform the request action. Please contact your system administrator." I am logged in as administrator. Has anyone come accross this before?
Thanks,
Jessa

Hi,
There are lots of Knowledge Base Articles with this description, for example:
1298962 - Error:"You do not have permission to perform the requested action. Please contact your system administrator for details"
1473840 - Error :"You do not have permission to perform the requested action" when trying to change password at first login
1630679 - Unable to reset admin password for Enterprise
1239840 - Administrator profile cannot change a user password in Central Management Console (CMC).
These can be researched from service.sap.com/notes
Regards,
H

Similar Messages

Your account does not have access to the forums system.

Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?

Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Admin Account does not have Admin Privileges

Here's the story
iMac 20" Aluminium
One of twenty for a school lab
Customised one from scratch, fresh OS install from accompanying disk set, installed all applications, ran all updates for OS and all applications, repaired permissions before and after.
Admin account in place, obviously.
I log in as admin and can open most applications. I cannot, however, open System Preferences.
I am told "Admin does not have permission etc". I did not set up a root account, and didn't really want to at this stage as it has not been necessary before.
Anyway, as access to System Preferences was not possible, I started up the iMac in target mode and booted my Mac Mini from the iMac OS. I could then log in as admin and access System Preferences.
In Accounts I created a second account which I called Admin1, and gave it admin privileges.
I repaired Permissions (twice) again. Disk Utility worked under this Mac Mini log in, but did not work when logged in directly on the iMac.
I logged out, shut down, detached the firewire cable and started up the iMac. It allowed me to log in using the new Admin1 account, but I still cannot access System Preferences. It is not connected to a network, as I have experienced Admin issues in the past when servers seem to interrupt some processes, because they have an Admin account too, of course.
I really do not want to go through the process of installing dozens of applications again (it's for an art lab, so has everything, with a full install taking six hours).
Has anyone experienced this weirdness and, more importantly, figured out a way to fix the problem.
I have been so careful with this configuration and have no idea what could have happened.
iMac details
2GHz Intel Core 2 Duo
2 GB 667Mhz DDR2 SDRAM
I cannot even open the More Info part of "About this Mac"..
I'm stumped. Help...
Thanks in Advance
Tony

several things you can do:
+ run terminal, type su and login as root, if not configured yet type sudo passwd enter your passwd and then enter your root passwd, then chmod 777 to system preferences application folder, or
+ open system preferences > account > give your account permission to administer system, or
+ show input menu to be show on login menu, logout, then login to OS X as root, then open account preferences again and use parental control to grant system preferences to be access and modified by your administrator account. REMEMBER remove the root option from login menu after that, to avoid other brute force your root password from login menu.
hope useful. if you have further question about your problem, don't hesitate to ask...

"Your username and password are incorrect or your account does not have access to Edge Inspect CC"

When I start the Windows App, I get this alert and Edge Inspect CCcloses itself (on Windows 8.1, 64 Bit). But my Creative Cloud App is working fine and is logged in correctly.
Is there someone, who knows a solution? How can I check, which account details edge inspect is using?!

Can you drop me an email with your Adobe ID (the email you use to log in). I'll check on it for you - [email protected]
(And I just need the email address, NOT the password )
=Ryan
[email protected]

SCVMM 2008 R2 - "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS)."

I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
"The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
ID: 2607"
What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
5) Neither service account is locked out
Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
Andrew Topp

That answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
as suggested by 331951, and that made absolutely no difference.
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
"doesn't have access to AD DS," which is obviously untrue)
The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?

I cant login to DPS App Builder. Get this error: ERROR This account does not have permission to access App Builder. Learn more about how to resolve this problem.

I cant login to DPS App Builder. Get this error: ERROR This account does not have permission to access App Builder. Learn more about how to resolve this problem.

Then you either need to:
1) Sign up for Creative Cloud so you can build a Single Edition app. Be warned though: this approach will no longer be valid as of May 1st when we retire support for Single Edition in Creative Cloud, and Single Edition apps are only on iPad devices.
2) Sign up for a full DPS license. You can request pricing information by filling in Adobe | Request for consultation.
Neil

VMM Shared ISO error "User account does not have permission required to open attachment"

I had this error once because the local service account was selected during installation of VMM. I have reinstalled VMM with a Domain service account and the error went away. However, the error is back.
"User account does not have permission required to open attachment '\\[servername]\VMMLibrary\server.ISO'. Error: 'General access denied error' (0x80070005). (Virtual machine ID GUID)"
I tried to create this VM on Host1 and got the error.
I then went to Host2 and was able to create the VM while using the same ISO on the same VMM library that failed on the Host1.
Both hosts have agent 3.2.7634.0 and are both running Hyper-V Server 2012 R2.
What is wrong with Host1 and how do I correct it?
Thank you.

This is a share configuration permissions issue.
http://technet.microsoft.com/en-us/library/ee340124.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

ADS Error: User does not have access to method rpdata.

Hi All,
I have done the ADS configuration according to ADS guide. But when I check the ADS using FP_PDF_TEST_00 report. First of all it is not taking ADSUser or ADS_Agent id. If I give J2EE admin id and password then I get following error:
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User J2EE_ADMIN does not have access to method rpData./<ns1:
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User J2EE_ADMIN does not have access t
Please help me on this.
TIA,
Amit

Amit,
Check this thread and see if it helps.
Adobe Document Services - test method rpData with user ADSUser and Notes 959462, 944221.
Chintan

I tried to add my Planner Plus to my calendar and it gave me a message that says "This app does not have access to your calendars." You can enable access in Privacy Settings. But when I go to Privacy Seettings, there are no apps listed under Calendar.

I am trying to access my calender in the app Planner Plus and I get the message. "This app does not have access to your calendars." You can enable access in Privacy Settings. But when I go to Privacy Settings, there are no apps listed under Calendar. Anyone?

Oh my gosh. This worked perfectly!!!
After allowing the changes, I just had to open the apps again (such as Instagram), then the pop-up asking to allow access to Photos appeared!
And I thought I was going to get rid of my iPhone 4 already because of the issue.

While deploying to another server from RM client using build definition i got below error "Package location does not exist or deployer user does not have access"

We have installed RM client in the POC server .
Installed Deployment Agent in Dev server .
We created Configuration stages for POC->Dev.
We created a template with x copy deployer and selected source as build definition.
While releasing we faced following issue ,
The release was success in POC (Where RM client is installed), but in DEV environment (Which is different server)it got rejected because of the error
"Package location(Path) does not exist or deployer user does not have access"

Hi Dhamayandhi
There is quite a bit to do to get RM working successfully. I have a soup-to-nuts guide on implementing continuous delivery with TFS and RM
here.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn:

Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

I have a really old Itunes account. I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year. How can I fix this?

I have a really old Itunes account. I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year. How can I fix this? I have about 70 downloaded songs on this log in that I would like to get back.
Thank you in advance.

Contact iTunes customer support.

You are not allowed to continue because your account does not have the proper privileges

I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.

there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this:

Problem configuring Adobe Forms: ADSUSER does not have access to method...

I hope all of you are doing well...
So here is a rundown on what is happening.
Enviroment:
Netweaver 7.0
ECC 6.0
Abap and Java stacks are installed on the same system.
Problem:
I am trying to configure Adobe Print forms and not Interactive forms. When I run the test: FP_PDF_TEST_00
I get the following error:
Error Code: 100.102
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User ADSUSER does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptions.
When I run the rpData test from the J2EE server I get the following response:
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 03 Oct 2008 15:56:51 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>User ADSUSER does not have access to method rpData.</faultstring><detail><ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1='http://sap-j2ee-engine/client-runtime-error'>User ADSUSER does not have access to method rpData.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
I would really appreciate all the help that I can get.
Thanks...

Thanks for the tip,
I had actually gone through the note before and tried out a couple of tips that were suggested in the note. I am still having the issue and believe that it might be due to the fact that I do not have a Credentials file installed.
I am applying for the credential and will see what happens.
thanks,
Saif

User J2EE_ADMIN does not have access to method rpData

Hello,
I'm using SAP ECC6 SR3 on windows x64 platform.
I try to launch report FP_PDF_TEST_00 in SE38 and I get following error message :
Test Program: Version Information (for Analysis Only) 1
*** SYSTEM ERROR
ERROR CODE : 100.102
ERROR MESSAGE :
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User J2EE_ADMIN does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptio
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User J2EE_ADMIN does not have access to method rpData./<ns1:com.sap.engine
I checked RFC ADS and it use J2EE_ADMIN to connect to /AdobeDocumentServices/Config?style=rpc.
Connection test returns no error.
Does anyone have an idea ?
Regards,

ADSUser could be locked as in this thread,
ADS Error: User does not have access to method rpdata.
Regards
Juan

Admin account does not have access to change a password in the CMC

Similar Messages

Maybe you are looking for