Admin and Task servers as one in the same

I open up the Remote Desktop software, and select 1 computer from the list. I then click on the "Install" icon and drag a .pkg file inside of the "Packages" area. I check off the radio button that says "Run this task from: The Task Server on this computer" and click the "Install" button.
I get a progress bar that runs infinitley and a message that says "The targetd computer, "<computer name>", is currently idle. It doesn't matter if the computer is up and running, or if it is offline. It says the same thing regardless and never installs the package.
If I decide not to "Run this task from: The Task Server on this computer" and instead "Run this task from: This application" then it works prefectly. I just can't seem to install from the local task server, which means I have to wait until this machine is online before I can manually run it, which means there's a problem with the way I set up the Task server.
Does anyone have any idea what's wrong with my installation? I have gone into "Remote Desktop -> Preferences -> Task Server" and made sure "Use Task Server on this computer" was selected, and it is. I am NOT using 2 different serial number for 2 different and separate copies of ARD3 for both an Admin + Task Server. I am, however, expecting the Task Server and Admin Server to run as one in the same. If this is not possible then perhaps the Documentation needs updating? From http://images.apple.com/server/docs/ARDTaskServer.pdf I read: "You can run the Task Server on either the administrator computer or a dedicated remote computer. The default Task Server is the administrator computer on which you installed Remote Desktop.". This means the Admin and Task Servers can run as one in the same, no? Please let me know if this is incorrect.

Update: Please refer to the post with the title of "Possible to run both an Admin Server and Task server from the same host?". Basically the answer to this problem is that there isn't one. I've called apple support and it's been confirmed that an Admin server and Task server CANNOT be run from the same installation on the same host. I suppose you could say the answer is to buy another license of ARD3 and run it in a separate host, but for some of us this isn't an option - especially for a very small startup.

Similar Messages

HT1918 My Apple ID (email address) is somehow registered to the US store even though I live in the UK. Can I close the US account and open a UK one with the same ID/email?

My Apple ID (email address) is somehow registered to the US store even though I live in the UK. Is there any way I can close the US account and open a UK one with the same ID/email?

No, but you can change the country of your iTunes Store account. Sign into your iTunes Store account and click the "change country" link. You'll need a valid UK credit card to complete the change. If you have any credit balance remaining, you'll need to contact the iTunes Store to clear that for you before you'll be able to change the country.
Note that if you purchased anything from the US iTunes Store, you probably will not be able to re-download it nor update apps once you change the country. So you may prefer to set up a new email address so you can create a new account in the UK iTunes Store. You can change the email address to which receipts and other notices are sent to your actual email address, if you prefer.
Regards.

I forgot the answer to the security questions and i forgot the email i put there to resend the link so i can change it. i want to close my apple ID and open a new one with the same email could i?

i forgot the answer to the security questions and i forgot the email i put there to resend the link so i can change it. i want to close my apple ID and open a new one with the same email could i?

i live in saudi arabia and i tried calling them and letting them call me but they said that it is unable to my country. ***** i don't know what to do!

How do i resend the confirmation email for icloud? I sent it months ago without knowing and cant find it now. I aksi tryed deleating the account and making a new one, but the same one keeps comming up...

OK, so im trying to use my icloud account, but months ago when i got my iphone, i sent myself the confirmation email, and i cant find it now. Is there a way to send another one? I also tryed deleating the account and starting over, but it keeps on pulling the same account up? what should i do?

Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.

New Macbook Air i5 wireless is very slow and disconnect again and again. Any one has the same issue or some help??

I recently bought a new 13 inch Macbook air and wireless internet is really slow and disconnect again and again. However I hav another windows laptop at the same place and that never disconects or looses signals? wireless on this mac is too slow that I cannot even use to make a skype call. I am new mac user and getting a bit disappointed because of this bad performance.I googled about this issue and found that lot of people are having the same issue with macbook air. I switched off the bluetooth adaptor but still no progress. Any help will be appreciated. Thanks

I am experiencing something similar with my MBA 13"/i5/256GB.
To take it one step further, I started up a Terminal session and ran a ping against my wireless router. I see the same pattern repeated over and over: I get about 5 or 6 pings through, then 4 or 5 misses, then it reconnects again. When it reconnects, the first ping or two have times in thousands of milliseconds, where normal is maybe sub-millisecond to 4ms for the remaining few seconds.
I have other wireless devices, including iPhone, iPad, and an older MacBook - all work fine. The MBA is the only Lion device.

If I delete my blackberry ID and create a new one with the same email will I still be able to get my old bbm contacts?

Hi so I forgot my bbid password and answer to security question so Im stuck now..please RIM really this is poor that you dont have a sytem to reset it without those two things I see hundreds of posts all over google with people with this problem so if there is a way let me know but as you can see in the subject that's my question if it's not possible to reset it without security queston answer
Regards
Garry

It is my understanding that if you delete the account per the instructions below, you will be able recreate, but you will NOT have access to the prior BBM contacts.
Read this for full information and suggestions to regain access to your BBID >> http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
You have to remember either the BlackBerryID password, or the secret question answer. Without either, you're stuck.
Your choices are:
--Use another email account to create an entirely new BlackBerryID (with which you will lose access to any purchased apps using the "forgotten" first BlackBerryID, or
--Find the initial email you were sent to confirm the initial BlackBerryID, and in it is a link to click to cancel and delete the account. Click on that, delete the account and then you can use that same email to create an entirely new account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

JPA 1.x,: parent (one-to-many) and children(many-to-one) in the same table

Hi, excuse me for silly question, but I can't get on with subject.
Please, see my @Entity:
@Entity
public class Department {
     @Id
     @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="DEPARTMENT_SEQ")
     @SequenceGenerator(name="DEPARTMENT_SEQ", sequenceName="DEPARTMENT_SEQ", allocationSize=1)
     @Column(name="ID")
     private Long id;
     @Column(name="PARENT_ID")
     private Long parentId;
     @Column(name="LABEL")
     private String label;
Each department can have one parent (except root department). Each department can have 0-* children (sub-departments).
Is it possible to realize tree structure using JPA 1.x?

This example seems to demonstrate what you want:
http://www.java2s.com/Code/Java/JPA/Relationsononeentity.htm

If i cancel an account can I create a new one with the same e-mail address?

I made an account with Game Center and I wanted to use it to get some free apps on the iTunes Store. When I tried to sign in on iTunes (for Windows) it said I had to review my details. I didn't have a credit card so I couldn't complete it and there wasn't any option for no credit card.
I wondered if I could cancel my account and create a new one with the same e-mail address. There was a discussion that you could create a new account on the iTunes Store and have the choice to not have a credit card.
Any help will help!
SuperHoops

No, it does not, not if the creation of the Apple ID was completed, which unless you are referring to a different Apple ID I presume it did since you are posting here. And once created, you can't get apps without providing a payment method; setting up for just free apps requires a very specific procedure or a payment method is necessary. Creating an account via Game Center does not work.
If you can create a new email address (Gmail or Yahoo mail will work), take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards.

Can I run the admin and managed servers as different users?

in unix, is it possible to run my admin and manged servers as different users with
7.1?

As long as users are in admin group, there could be different users starting different
servers.
"Frank" <[email protected]> wrote:
>
"Erik Johnson" <[email protected]> wrote:
Hi, Frank.
Could you be a little more specific about what it is you want to do?
Thanks.
erikUh, I'm on unix, I have Weblogic 7.0 service pack4. I have 1 managed
server and
I have one admin server...Can I run the admin server as user 'hithere'
and run
the managed server as user, 'byethere'......
"Frank" <[email protected]> wrote:
in unix, is it possible to run my admin and manged servers as different
users with
7.1?

Automating start / restart of WebLogic Admin and managed servers on MS Windows

Hi All,
Please help me to do the automation of start and stop scrip of Oracle Weblogic 10.3.6 and Forms and Reports 11.1.2.2.0(Managed Servers) On Windows server 2008.
Here are two options for automating start / stop of WebLogic Admin and managed servers on MS Windows. Please suggesst which one is standrad procedure.
Use NodeManager (installed as a MS Windows Service)
or
Create Windows Service(s) for the server(s) - no NodeManager
Following Document : 1060058.1
Please suggest me the best practice. Many thanks in advance.
Kind Regards,
Mohan

Hi Borys,
Thank you for quick reply...
If we use the first option "Create Windows Service(s) for the server(s) - no NodeManager" then we will be facing issue Like "Admin Server or Managed Server may go into an unhealthy or failed state but the JVM is still running"
In the document : 1060058.1 : Mentioned as Important Note: The second option has a limitations.
Limitaion is below when we use first option : "Create Windows Service(s) for the server(s) - no NodeManager" -
Windows Services Manager only monitors the JVM process. If the JVM process fails (shuts down), then Windows Services Manager will attempt to restart it. But there are some scenarios where the Admin Server or Managed Server may go into an unhealthy or failed state but the JVM is still running. The Windows Service will not know to restart the process in these cases. If a server is started using NodeManager, NodeManager would recognize such a state and restart the process accordingly. Furthermore, if you start up managed servers via a MS Windows Service, you cannot monitor and/ or stop the managed server via the Weblogic Admin Console and/or Fusion Middleware ( Enterprise Manager ) Control.
I have implemented the second option "Use NodeManager starting admin and manged servers via WLST script" - Python script. Its working well without issue...No Limitation...
Script Contains Below :
print "================== Start scripts of Managed servers and Admin server ======================"
nmConnect(userConfigFile='D:/myFiles/myuserconfigfile.secure',userKeyFile='D:/myFiles/myuserkeyfile.secure',host='00.0.00.00',port='5556',domainName='ClassicDomain',domainDir='D:\Oracle\Middleware\user_projects\domains\ClassicDomain',nmType='ssl')
print "================== Adminserver Starting ================================================"
nmStart('AdminServer')
connect('weblogic','Password1','10.4.93.117:7001')
print "================== MANAGED SERVER (FROMS) Starting ====================================="
start('WLS_FORMS','Server')
print "================== MANAGED SERVER (REPORTS) Starting ==================================="
start('WLS_REPORTS','Server')
exit()
HOPE WE WILL MEET AGAIN AND AGAIN...
Many thanks for your comments!
Kind Regards,
Mohan

Command for STOPPING admin and managed servers

I am writing a script for our application, which apart from building and
deploying application, also needs to stop and start both admin and managed
servers. Is there any command available for properly stopping the weblogic
servers? ( something that "initiates the shutdown")
Thanks

Scott, could you try specifying the protocol: t3 in the url of the
servers.
eg) java weblogic.Admin -url t3://172.17.13.46:7013 -username system
-password
xxx SHUTDOWN
-mihir
Scott Jones wrote:
I have a script that shutsdown all my servers java weblogic.Admin -url
neo.conway.acxiom.com:$S4_ONLINE_PORT SHUTDOWN -username system
-password $S4_WLS_ADMIN_PW
java weblogic.Admin -url neo.conway.acxiom.com:$S4_S4MT_PORT SHUTDOWN
-username system -password $S4_WLS_ADMIN_PW
java weblogic.Admin -url neo.conway.acxiom.com:$S4_WLS_ADMIN_PORT
SHUTDOWN -username system -password $S4_WLS_ADMIN_PWThe first two
lines shut down my managed server. The last shuts down my admin
server. Scott [email protected]
"Mihir Kulkarni" <[email protected]> wrote in
message news:[email protected] here -
Solaris 2.7 with WLS 60 sp1.
I am not facing any problems, though!
Fyi, my managed-server is not in a cluster.
JD wrote:
I am running on Solaris 2.7 using WL6.0sp1.
Mihir Kulkarni <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0transitional//en">
<html>
Hi,
 Could you please specify on which platform are youfacing this problem.Also,
which sp of the WLS 60 are you using ?
I tried the weblogic.Admin SHUTDOWN command on NT andSolaris and
it
runs correctly on both. These are the results:
on NT:
 on the client:
 java weblogic.Admin -url t3://172.17.13.46:7013-username system
-password
xxx SHUTDOWN
 Shutdown initiated
 The shutdown sequence has been initiated.
on the Managed server:
 <Jun 13, 2001 11:45:49 AM PDT> <Alert><WebLogicServer>
<The
disabling of server
 logins has been requested by system>
 <Jun 13, 2001 11:45:49 AM PDT> <Alert><WebLogicServer>
<Server
logins have been
 disabled.>
 <Jun 13, 2001 11:45:49 AM PDT> <Alert><WebLogicServer>
<Server
shutdown has bee
 n requested by system>
 <Jun 13, 2001 11:45:49 AM PDT> <Alert><WebLogicServer>
<The
shutdown sequence h
 as been initiated.>
 <Jun 13, 2001 11:45:49 AM PDT> <Info><WebLogicServer> <Server
shutdown is comme
 ncing NOW and is irreversible.>
 <Jun 13, 2001 11:45:49 AM PDT> <Info> <HTTP> <[HTTPstandAloneServer]
Destroying
 servlets in default servlet context>
 <Jun 13, 2001 11:45:49 AM PDT> <Info> <JMS><Undeployed
4 default connection fac
 tories.>
 <Jun 13, 2001 11:45:49 AM PDT> <Info> <JMS> <JMSshutdown
is complete.>
 <Jun 13, 2001 11:45:49 AM PDT> <Info><WebLogicServer> <Removing
"ClientContext
 - id: '#|standAloneServer|1.992457846784', bound:'false', dead:
'false'"
becaus
 e of hard disconnect timeout.>
 <Jun 13, 2001 11:45:50 AM PDT> <Info><WebLogicServer> <Requesting
all threads t
 o perform their own shutdown.>
 <Jun 13, 2001 11:45:50 AM PDT> <Info><WebLogicServer> <Shutting
down Thread[SSL
 ListenThread,5,WebLogicServer]>
 <Jun 13, 2001 11:45:50 AM PDT> <Info><WebLogicServer> <Waiting
20 seconds for t
 hreads to complete shutdown.>
 <Jun 13, 2001 11:45:50 AM PDT> <Info><WebLogicServer> <Shutting
down Thread[Lis
 tenThread,5,WebLogicServer]>
 <Jun 13, 2001 11:46:10 AM PDT> <Info><WebLogicServer> <Stopping
execute threads
 .>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '0' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '1' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '2' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '3' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '4' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '5' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '6' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '7' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '8' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '9' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '10' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '11' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '12' for queue: 'default'' stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '0' for queue: '__weblogic_admin_html_queue''stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '1' for queue: '__weblogic_admin_html_queue''stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '0' for queue: '__weblogic_admin_rmi_queue''stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Critical> <Kernel><Execute
Thread: 'ExecuteThre
 ad: '1' for queue: '__weblogic_admin_rmi_queue''stopped.>
 <Jun 13, 2001 11:46:10 AM PDT> <Info><WebLogicServer> <Shutdown
has completed.>
on Solaris platform:
 on client:
 java weblogic.Admin -url t3://willard.beasys.com:7003-username system
-xxx mihirk00 SHUTDOWN
 Shutdown initiated
 The shutdown sequence has been initiated.
on the Managed server:
 <Jun 13, 2001 11:52:26 AM PDT> <Alert><WebLogicServer>
<Server
shutdown has been requested by system>
 <Jun 13, 2001 11:52:26 AM PDT> <Alert><WebLogicServer>
<The
shutdown sequence has been initiated.>
 <Jun 13, 2001 11:52:26 AM PDT> <Emergency><WebLogicServer>
<ListenThread.run() failed: java.lang.ThreadDeath>
 <Jun 13, 2001 11:52:27 AM PDT> <Emergency><WebLogicServer>
<The WebLogic Server is no longer listening forconnections. You should
probably restart it.>
 <Jun 13, 2001 11:52:27 AM PDT> <Alert><WebLogicServer>
<Server
shutdown has been requested by system>
 <Jun 13, 2001 11:52:27 AM PDT> <Alert><WebLogicServer>
<The
shutdown sequence has been initiated.>
So, it works fine for me.
 Please let me know if I am missing something.
cheers,
 Mihir
 
Scott Simpson wrote:
<blockquote TYPE=CITE>"JD" <[email protected]> wrote
in message
 <a
href="news:[email protected]">news:[email protected]</a>...
 > I ran this problem past BEA support and as usualthey can not duplicate
 the problem.
They can't duplicate the problem! Everybody on thisnewsgroup has
the
same
 problem. How can they not duplicate it?!</blockquote>
</html>
[att1.html]

Alert setup for Admin and Manage servers in weblogic

Hi All,
We need to setup e-mail notification for health status of admin and managed servers on fusion middleware 11g. Kindly advise.
Thanks,
Vijay

Hi there Vijay,
you can easily do this using the WebLogic Diagnostic Framework. If your WebLogic installation hosts products from the Fusion Middleware portfolio, e.g. Oracle SOA Suite, Oracle WebCenter, etc., you will have a preconfigured WLDF module targeted to all servers named Module-FMWDFW.
In general you will have to:
1. Configure mail session and target it to all servers. Details on the mail server are provided as properties. Use the following as a starting point:
mail.host=<your_outgoing_mail_server_host>
mail.user=<your_outgoing_mail_server_user>
mail.transport.protocol=smtp
mail.from=<address_to_send_emails_from>
mail.debug=True
2. Configure WebLogic Diagnostic Framework Module or reconfigure the Module-FMWDFW if exists
3. Configure Watches and Notifications for that module and the data/events you are interested in. By default the Module-FMWDFW is configured to generate ADR incidents in certain occasions (you can examine the configuration of Module-FMWDFW).
You can get more details from these resources:
http://docs.oracle.com/cd/E29542_01/web.1111/e13714/architecture.htm#WLDFC115
https://blogs.oracle.com/jamesbayer/entry/weblogic_notifications_watch_t
Hope this helps,
A.

Commands for STOPPING admin and managed servers

I am writing a script for our application, which apart from building and
deploying application, also needs to stop and start both admin and managed
servers. Is there any command available for properly stopping the weblogic
servers? ( something that "initiates the shutdown")
Thanks

sorry i haven't moved up to 6.0 yet, so i don't know much about it :(
hope someone else can help you there
Manmari wrote:
thanks bhavin. I will try this on my 6.0 However what is the command for
stopping any of my "managed servers"? Is it the same or something like
java weblogic.Managed "t3://managedserver:7003" SHUTDOWN
Have you tried it. I founf a note on other newsgroup that this does not work
for maged servers. Do you know the solution? Does it work for you?
youe help is much appreciated
Thanks
"bhavin patel" <[email protected]> wrote in message
news:[email protected]..
i don't know if this is what you are looking for, but to stop wl 5.10
you just need to run the weblogic.Admin class
like this
java weblogic.Admin "t3://yourserver:7001" SHUTDOWN <username> <password>
hth
Manmari wrote:
I am writing a script for our application, which apart from building and
deploying application, also needs to stop and start both admin and
managed
servers. Is there any command available for properly stopping theweblogic
servers? ( something that "initiates the shutdown")
Thanks

Have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer.

I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But after I sync I only get 6 out of the 9 voice memos on my iPhone.
How do I get the rest (or all) of the memos from my iPhone copied to my computer?
Albro P Michell
[email protected]

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

HT1206 Can I have in one iphone 5 music from more than one itunes accounts? My daughter and I have our music in the same pc. She and I have iTunes accounts. I have not been able to load in my ophone with my itunes acct music that she purchased in her acc

Can I have in one iphone 5 music from more than one itunes accounts? My daughter and I have our music in the same pc. She and I have iTunes accounts. I have not been able to load in my ophone with my itunes acct music that she purchased in her account. I have not been able to do this. Thanks

iTunes Match is not sharable across Apple IDs. The best way to get the music on her iPad is to leave hers signed into her Apple ID on the iTunes Store and sync via USB.

Admin and Task servers as one in the same

Similar Messages

Maybe you are looking for