Admin console not opening

Hai Folks,
I have installed Weblogic8.1 SP5.I have created mydomain with user name,password,and all other portdetails host.
When I start server it is running properly with out any errors..the out put window shows the below message..
Starting weblogicserver with Java HotSpot(TM) Client VM Version 1.4.2_0
Inc.>
2006 11:14:55 AM CDT> <Info> <Configuration Manageme
r is being started as the administration server.>
2006 11:14:55 AM CDT> <Info> <Management> <BEA-14110
8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358
XMLX Module 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 6
2006 11:14:56 AM CDT> <Notice> <Management> <BEA-140
ration from configuration repository at C:\bea\user_
config.xml.>
2006 11:14:59 AM CDT> <Notice> <Log Management> <BEA
e C:\bea\user_projects\domains\mydomain\myserver\mys
ver side log events will be written to this file.>
2006 11:15:02 AM CDT> <Notice> <Security> <BEA-09008
ing security realm myrealm.>
2006 11:15:03 AM CDT> <Notice> <WebLogicServer> <BEA
Admin Server "myserver" for domain "mydomain">
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
dmin Server "myserver" for domain "mydomain" running
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
RUNNING mode>
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
ad.Default" listening on port 7001, ip address *.*>
But when i try to open admin console through browser giving the url as
http://localhost:7001/console the page is not displaying its giving page not found error.I tried it again by restarting the system,but again the same problem..Please help me regarding this problem.
Thanks,
Sai

Hello, Sai! Can you give us some more info? Such as:
- Operating system
- Browser used
- Whether anything comes up in the output window
- Whether anything comes up in the log files (domain log, server log, etc.)
Some suggestions:
Did you wait a bit after starting? Perhaps it hadn't quite started yet (unlikely).
Do you have a firewall running? Perhaps it is blocking port 7001.
Does your hosts file resolve localhost to 127.0.0.1? You could just try http://127.0.0.1:7001 instead.
Make sure that you have Java enabled (although I think you would still get the login page even if you didn't have Java).
Try a different browser.

Similar Messages

Exchange server 2010 console not opening, inialization failed

hi,
exchange server 2010 console not opening, inialization failed when i have upgraded service pack to sp1.
please suggest asap or u can reach me @
[email protected]
[email protected]
+918750003544

Even I found the same issue once, and then I realised that the SP and RU should be same in exchange sever and the machine where the issue is.
Could you please check the same if that machine has the same Sp and RU, if not, please upgrade the same? I bet it will start working
Regards,
ASP20
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

OBIEE 11.1.1.7, Win 8, Admin tool not opening.

Dear Experts,
I have recently installed OBIEE 11.1.1.7, on windows 8, 64bit, I3 processor and 6 GB ram configuration.
Installation is successfull, i can login all console,em, answers etc.
Only issue is Administration tool to manage to RPD is not opening. It just pops up the CMD windows and then stays there at it is.
No further progress after that.
Could you please let me know, since it's in my home laptop, can i install OBIEE client separately in the same machine in which server is installed?
the whole installation seems to be useless if i can't edit RPDs.
thanks.

I did a deinstall, and installed whole OBIEE 11.1.1.7 again. This i time noticed while installing it i had to run the installation wizard in compatibility mode.
And the windows version this wizard was comfortable was windows XP.
Also during installing it, at one of the initial stage it showed an error of operating system certification but i opted to ignore and continue with the installation.
It went through all the configuration steps too.
but again not able to find how to load Admin tool. I know for sure there is one condition in which the tool loads and works fine but not sure what is that.
any help will be greatly appreciated.
thanks.

Administrator console not opening

Guys,
I have just installed OBIEE in windows xp. My OC4J and other apps are running. But when i open the Administrator console (Admin tool) , it does not open. It acts as if i didnt click it.
Can some one point to what i should do to solve htis issue ?
- GJ

Hi,
Well, the UI would still be up if your OC4J is up however you will not be able to login as the Authentication passes through BI Server and your BI Server needs to be up for this, netiher would you be able to open online mode RPD without BI Server running. Why not you go to 'RUN' and issue this command "admintool" and check if you are able to access.
Hope it helps
Regards

BAM Console not opening

Hi
I am not able to login in my BAM console. The Logic=n page is coming but after giving username and password its not opening the next page. My bam server is up and running. Can anyone please suggest what could be the issue with my BAM console. I am using following URL for accessing BAM
http://<server-url>:<bam_server port>/OracleBAM
Thanks in Advance

Hi Roshni
1. Check the log files / console output from where you started your bam server. Look for any errors / exception stack traces.
2. Also if I am not wrong, only IE supports BAM Reports. So I hope you used IE and not firefox browser.
3. Do you get any invalid username/password errors when you login.
4. Try with admin username/password to login.
5. Have you done all the basic configs for BAM Reports like setting outbound connection details, host,port, etc for OracleBAMAdapter module form Weblogic console. From EM Console, add proper users/groups to BAMAdminRole and any narrowed down users to access BAM Reports etc.
Thanks
Ravi Jegga

Admin Console not logging in on AWS

This topic has come up a lot and I've ready through many of them, but none of them seem to have my exact issue. I recently setup Flash Media Server on Amazon EC2 and things are going well so far; however the admin console wont login. I've set the username, password, and port in the config file and opened that port, among others, in the security group. I've then restarted both FMS and admin server multiple times.
When I try to login I get no errors. Nothing happens at all. When I open FireBug and/or Fiddler2 to watch the communication, I'm not seeing a single thing happen. Clicking "Login" submits no requests at all. Do I just not understand how FMS works? I would assume some sort of request would need to be made.
Eric

Does firebug/fiddler captures "rtmp" traffic - i suppose not and hence you are not catching anything.
Are you able to telnet to <serverip>:1111 from your machine(which you are using to login) ?
Also did you check Admin logs if there is anything logged and also checked if Admin server started successfully.

Admin Console not working

I am not sure what I am doing wrong, but my admin console does not appear to be working. I have 7 different computers right now playing a 10 minute video from the FMS. All are playing the video via http://myserver/vod/video.mp4. I open the admin console and it is not showing any connections playing under current connections.....but there ARE 7 successful connections as I am watching them play right now. Maybe the admin console is not set up correctly? This forum has been amazing at answering my questions....I hope this question is no different.

Ugh....
See the big problem is we cannot use rtmp:// because we have a bunch of users on iPad's that do not use flash. So we are using (Apache) and the http://. I just do not understand why the console will only see connections if they are rtmp??? Can I see these connections anywhere else?

Hi Team Admin console not connecting

Hi Team,
I am using sccm2007 sp2 in one of the primary. I am unable to connect admin console getting attached error. Actually one of my team met did the repository rename.. Is it cause issue? if yes. how can i back the track

Previously i able to connect the sccm primary console. now i am not. I checked permission vise everything good..
So that i capture my adminui.log ..
one of my team met done the repository rename in primary server. My question that's y i am not able to connect the sccm server. when i tried to connect in WMI root\sms_sitecode getting error.. can you understand now? or not
There is no getting back the WMI namespace if it was renamed or delete. It is not supported to do this without contact CSS directly for support.
You have two options, Attempt to clean up the mess of renaming the WMI. This might take a while due to the complexity of WMI and the unknowns of what was exactly done.
Call CSS and tell them what exact you have done and get them to work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Sunone console not opening after upgrade from DS5.2 patch 3 to patch 4

Hello,
The Sunone Console is not opening when i upgrade from Directory server 5.2 patch 3 to patch4. I getting the following error message
"error 501 Cannot logon because of an Incorrect userid,incorrect password or directory problem"
can u please guide me. how can i solve this problem.
Regards,
Srini

So while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table."

Resources created w/MQ Admin Console not seen in GF Admin console

Environment:
Glassfish Enterprise Server v2.1
JDK 1.6.0_11-b03 (bundled)
Sun Java(tm) System Message Queue 4.3 (Build 7-g)
Windows XP SP3
Following the documentation in Chapter 1 of the Sun Java System Message Queue 4.1 Administration Guide[1] I used the MQ Admin Console SWING tool to create an ObjectStore with the following properties:
java.naming.provider.url - file:///C:/imq_admin_objects
java.naming.factory.initial - com.sun.jndi.fscontext.RefFSContextFactory
In that object store I created six destinations (3 Queues and 3 Topics) along with one connection factory.
I also used the Admin Console to create one Broker with host set to localhost and primary port set to 7676. Within that broker I created 6 physical destination for the destinations I created in the object store.
In the Glassfish administration console under Configuration -> Java Message Service -> JMS Hosts -> Physical Destinations none of the ones I created in the Broker using the MQ Admin console were visible. I suspected this was due to the fact that GF needs the naming properties I set when I created the ObjectStore with the MQ Admin console so I set them under Configuration -> Java Message Service : Additional Properties. When I did that and restarted the domain the physical destinations I created with the MQ Admin console now showed up in the GF admin console's Physical Destinations section.
However, the ConnectionFactory and Destinations I created in the ObjectStore do not show up in the GF Admin console's Resources -> JMS Resources -> Connection Factories and Resources -> JMS Resources -> Destination Resources respectively. I suspect this is also a case of needing to feed some properties to the domain somewhere but I don't see an obvious place to do so. Nor am I sure what they should be since they need to be scoped to the JMS resource but simply adding a property like java.naming.factory.initial to a more global scope then one affecting only JMS would be 'a bad thing'.
FWIW the GF Enterprise Server 2.1 Administration Guide [2], Chapter 4 - Configuring Java Message Service Resources does not touch on this subject either.
TIA,
-NBW
[1] http://docs.sun.com/app/docs/doc/819-7755/gcrlv?a=view
[2] http://docs.sun.com/app/docs/doc/820-4335/abljw?a=view
Edited by: NBW-2009 on May 27, 2009 1:24 PM

You might want to check with the glassfish/application server forum first
http://forums.sun.com/category.jspa?categoryID=109
-Mathi

Admin Console not displaying new Users and Groups from LDAP

We created a new Realm in WebLogic, which specifies the location of the Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to find the ldap
server to use for authentication. My problem is this- the Admin Console is not
displaying the new users and groups from the LDAP server. Shouldn't the WebLogic
Admin Console display any users and groups specified in the ldap server, which
is referenced in the customized Realm?

Hi Andy,
I am not sure why you are unable to see the users and groups through the
console., you should be able to. Can you post the config.xml?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:3b700c36$[email protected]..
>
We're running WLS 6.0 Sp2 on Windows 2000 Professional.
"Satya Ghattu" <[email protected]> wrote:
Andy,
Could you please tell us what Version of Weblogic you are running?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:[email protected]..
We created a new Realm in WebLogic, which specifies the location ofthe
Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to findthe
ldap
server to use for authentication. My problem is this- the Admin
Console
is not
displaying the new users and groups from the LDAP server. Shouldn'tthe
WebLogic
Admin Console display any users and groups specified in the ldap
server,
which
is referenced in the customized Realm?

Admin Console Not Displayed !!

Help please ! This is a wierd problem. We cant get the admin console (port 7001)
to come up in a browser. The browser just runs and runs and never displays an
error message ... we were able to see the console a couple of days ago ... never
saw anything like it. Admin server is running and application server instance
is running ,,, we can see application in browser ,, just not Admin console !
Any ideas ? Appreciate any help ...

just re-start the admin instance and then tpye the correct url on a new browser
window.
let me know if this helps !!!
Frank D. Greco <[email protected]> wrote:
"E allen" <[email protected]> sez:
Help please ! This is a wierd problem. We cant get the admin console(port 7001)
to come up in a browser. The browser just runs and runs and never displaysan
error message ... we were able to see the console a couple of days ago... never
saw anything like it. Admin server is running and application serverinstance
is running ,,, we can see application in browser ,, just not Admin console!
     I've had the same problem (in IE). I have to kill IE and restart it
     quite often.
     Also, Opera has significant problems with displaying the console (the
     left-hand applet).
     It may be a JVM-versioning, which I haven't checked yet. I'm using
     the 1.4 plug-in JVM, not the default 1.1 JVM (circa 1997) of
     MonopolySoft.
     frank
+=========================================+
| Crossroads Technologies Inc. |
| Enterprise Java Engineering |
| Web: www.CrossroadsTech dot com |
| Email: fgreco @ crossroadstech dot com |
+=========================================+

OIM server running but webconsole and design console not opening

Hi All,
I configured OIM in my machine by giving the following OIM HTTP url during installtion : http:/xxx.xxx.x.7:14000.
The configuration was successful and i was able to work in both design and web console(http://localhost:14000/oim) of OIM for many months.
But all off a sudden, the OIM consoles are not opening though the OIM server is in running mode (Verified thro Weblogic web console). And i also found that my my local ip address changed to xxx.xxx.x.6.
I doubt that this behavior is due to the change in my system ip address.
Am i right or could there be any other reasons? if yes, Is there anything i can do now?
Any help is highly appreciated.
Thanks
Pria

No, both the ways did not work for me.
I updated my host file as below and tried accessing the webconsole(http://old ip:14000/oim) but it did not turn up.
new ip address http://old ip:14000/oim
I hope the above is correct.

WAP2000 Admin console not accessable

I'm having an issue with our WAP2000 access point. I had to reset the access point and now I can't access the admin console. I've set a static IP address just as I did when I first set it up. Now when I browse to the 192.168.1.245 in my browser it just displays an Authentication error. Need some help with this please.

Ok so here is what needs to be done.
If you are using the WAP2000 you may(will) have some issues if you are trying to configure your device you must have it attached to a router that has 192.168.1.* class c IP Range. If not you will have some issues. Once you have that part you can then move on to accessing the admin console.
If the router is wireless or wired make sure that DHCP is turned on so that you can insure that you will recieve an IP address in the same range. With that done connect to the Router not the WAP and wait for the connection to be established. Once that is done you can then browse to either 192.168.1.245 or http://192.168.1.245. once inside set the WAP to accept web support this way no matter what IP it gets once configured you can access it.

GUI Admin console not launching and fixed

Hello,
I spent some time on this might help someone...
I installed the Sun Java System application 8, everything worked (app server, pointbase, deploytool) except the gui admin console (localhost:4848). It would not launch. It <blinked>blinked</blinked>. Really - the tab text blinked on firefox. So I ...
1. checked PATH and JAVA_HOME to be correct.
2. rebooted
2. reinstalled appserver
3. rebooted
4. tried firefox & microsoft ie
To no avail.
I then turned off my firewall. It worked. It might for you too.
ciao,
-rob

Hi Andy,
I am not sure why you are unable to see the users and groups through the
console., you should be able to. Can you post the config.xml?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:3b700c36$[email protected]..
>
We're running WLS 6.0 Sp2 on Windows 2000 Professional.
"Satya Ghattu" <[email protected]> wrote:
Andy,
Could you please tell us what Version of Weblogic you are running?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:[email protected]..
We created a new Realm in WebLogic, which specifies the location ofthe
Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to findthe
ldap
server to use for authentication. My problem is this- the Admin
Console
is not
displaying the new users and groups from the LDAP server. Shouldn'tthe
WebLogic
Admin Console display any users and groups specified in the ldap
server,
which
is referenced in the customized Realm?

Admin console not opening

Similar Messages

Maybe you are looking for