Admin Console not working

I am not sure what I am doing wrong, but my admin console does not appear to be working. I have 7 different computers right now playing a 10 minute video from the FMS. All are playing the video via http://myserver/vod/video.mp4. I open the admin console and it is not showing any connections playing under current connections.....but there ARE 7 successful connections as I am watching them play right now. Maybe the admin console is not set up correctly? This forum has been amazing at answering my questions....I hope this question is no different.

Ugh....
See the big problem is we cannot use rtmp:// because we have a bunch of users on iPad's that do not use flash. So we are using (Apache) and the http://. I just do not understand why the console will only see connections if they are rtmp??? Can I see these connections anywhere else?

Similar Messages

Overdrive Media console not working with iTunes when transferring audio books. Any suggestions?

Overdrive Media console not working with iTunes when transferring audiobooks. Some parts don't transfer.

Robin, I have the 4S too. Here's wha I've been doing. Well, I am downloading wma books, but it is super time consuming and annoying. First, shut off genius in your preferences in iTunes. Also change to spoken podcast for speed. Then, you start to transfer from Overdrive. It will create a playlist with your book title. Open up books though because you need to keep an eye on it. It may download like three parts and then you may have a grey one. When you get the grey, cancel the transfer, delete the greyed part, exit iTunes, re-enter iTunes, and then try to download the remaining book parts. I usually have to re-enter iTunes three or four different times during a book. When your book is downloaded, all black and none grey, open up the playlist folder and double check that all parts made it in there. If not, carry them from the books folder to the playlist and then move it into numerical order.
Re non bookmarking problem. I now have a new habit of checking what part I am on before i shut off my phone or switch to another book. It does save where you were, it just doesn't show you. For instance, if I start part three and then play music, and then go back to the book playlist, it will appear as if we are back to the beginning, but if I go to part three, it will start up from where I was. So, just start checking and then it is easy. I am flabbergasted that no other proper solution has been offered by Overdrive. This has been a problem since October. I also wish they would acknowledge the problem on their website as well as post what version number of update they have. I have 3.2.1.0 and think that's current. Does anyone have newer than this. Good luck, and happy commuting!
An easy, quick workaround is to plug external speakers into your laptop and take it with you in the car. A bit unwieldy, but I can't commute without books.

Visual admin tool not working

hii guys,
in my netweaver system visula admin tool not working .when ever im trying to connect with user id and password its showing like this.how can i solve this issue.plz help me

Hi,
Try to login to system info page with administrator or j2ee_admin for java and dual stack respectively to check if the password is correct.
If the password is incorrect, then check if you have any alternate admin ID. Change the administrator or j2ee_admin password, then try to login with the new password. Change the password of SDM and securestore to the new one.
If this is not the case, then check the log files in visual admin directory. Please post the same.
Cheers...,
Raghu

Vmware console not working

Restart the host management services, if you want to post screenshots or more info do so on here, no third party links, most people will not look on them (me included)

Vmware console not working.
ESX6
can ping the fqdn and have tried turning off the windows firewall.
https://gyazo.com/2980ae196b12f015d59fcca8f723d4fc
help?
This topic first appeared in the Spiceworks Community

Hi Team Admin console not connecting

Hi Team,
I am using sccm2007 sp2 in one of the primary. I am unable to connect admin console getting attached error. Actually one of my team met did the repository rename.. Is it cause issue? if yes. how can i back the track

Previously i able to connect the sccm primary console. now i am not. I checked permission vise everything good..
So that i capture my adminui.log ..
one of my team met done the repository rename in primary server. My question that's y i am not able to connect the sccm server. when i tried to connect in WMI root\sms_sitecode getting error.. can you understand now? or not
There is no getting back the WMI namespace if it was renamed or delete. It is not supported to do this without contact CSS directly for support.
You have two options, Attempt to clean up the mess of renaming the WMI. This might take a while due to the complexity of WMI and the unknowns of what was exactly done.
Call CSS and tell them what exact you have done and get them to work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

GUI Admin console not launching and fixed

Hello,
I spent some time on this might help someone...
I installed the Sun Java System application 8, everything worked (app server, pointbase, deploytool) except the gui admin console (localhost:4848). It would not launch. It <blinked>blinked</blinked>. Really - the tab text blinked on firefox. So I ...
1. checked PATH and JAVA_HOME to be correct.
2. rebooted
2. reinstalled appserver
3. rebooted
4. tried firefox & microsoft ie
To no avail.
I then turned off my firewall. It worked. It might for you too.
ciao,
-rob

Hi Andy,
I am not sure why you are unable to see the users and groups through the
console., you should be able to. Can you post the config.xml?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:3b700c36$[email protected]..
>
We're running WLS 6.0 Sp2 on Windows 2000 Professional.
"Satya Ghattu" <[email protected]> wrote:
Andy,
Could you please tell us what Version of Weblogic you are running?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:[email protected]..
We created a new Realm in WebLogic, which specifies the location ofthe
Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to findthe
ldap
server to use for authentication. My problem is this- the Admin
Console
is not
displaying the new users and groups from the LDAP server. Shouldn'tthe
WebLogic
Admin Console display any users and groups specified in the ldap
server,
which
is referenced in the customized Realm?

BizTalk Admin Console not responding when loading configuration

Hi All,
I have a BizTalk 2013 R2 test environment which has separate BizTalk and SQL servers.
Due to something went wrong with the BizTalk server so I built another BizTalk
server and joined the same BizTalk group and I also moved the master secret
server to the new BizTalk server. I removed the old BizTalk server from the
group and shut the old server down.
But when I am using the new server to load the configuration for any receive or send ports,
the MMC gave me the "this snap-in is not responding" alert and if I canceled the alerts a couple of times, the configuration info can be loaded.
The admin console is fast when not loading configuration though.
Does anybody have any ideas what could be wrong?
Thanks,
David
David

This issue could be because of many reasons. Work on the below pointers.
1) I would suggest you to start with performing BizTalk Repair to avoid any registry issues, because in most of the cases Admin console related issues are solved by BizTalk repair only.
2) Check if SQL Server and MSDTC service is running properly.
As a Last option collect DebugDiag logs and try to analyze the same.
https://www.microsoft.com/en-us/download/details.aspx?id=42933
Check the below articles as well.
http://blogs.msdn.com/b/biztalknotes/archive/2014/02/20/biztalk-server-admin-console-fails-to-launch.aspx
http://support.microsoft.com/en-us/kb/2449532
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Admin Console not logging in on AWS

This topic has come up a lot and I've ready through many of them, but none of them seem to have my exact issue. I recently setup Flash Media Server on Amazon EC2 and things are going well so far; however the admin console wont login. I've set the username, password, and port in the config file and opened that port, among others, in the security group. I've then restarted both FMS and admin server multiple times.
When I try to login I get no errors. Nothing happens at all. When I open FireBug and/or Fiddler2 to watch the communication, I'm not seeing a single thing happen. Clicking "Login" submits no requests at all. Do I just not understand how FMS works? I would assume some sort of request would need to be made.
Eric

Does firebug/fiddler captures "rtmp" traffic - i suppose not and hence you are not catching anything.
Are you able to telnet to <serverip>:1111 from your machine(which you are using to login) ?
Also did you check Admin logs if there is anything logged and also checked if Admin server started successfully.

OSX: Connecting to admin session not working anymore since 8.0.12

Hey
It seems to me that connecting to console session does not work anymore since the recent update to 8.0.12. Had no troubles before the update, now it does not connect to the console session but a normal one. Please fix this.
Mac OSX 10.9.5, Apple Remote Desktop 8.0.12
Cheers, Marcel.

Hey Dharmesh,
Thanks for your reply. I mixed up terms. I cannot connect to the "admin session", in my last message I used the term "console session", sorry about that. Connecting works, but it connects normally instead of the admin session. Checkbox
"Connect to admin sesssion" is active.
In the logs I found the following message. Not sure it's related to my problem.
Cheers,
Marcel
[2014-Dec-11 08:20:11] RDP (0): correlation id: 012580ec-dbe5-8db2-a2c0-1c58dfb00000
[2014-Dec-11 08:20:11] RDP (0): Resolved 'replaced.host.name.com' to '1.2.3.4' using NameResolveMethod_DNS(1)
[2014-Dec-11 08:20:11] RDP (0): Exception caught: Exception in file '../../librdp/itotlayer.cpp' at line 875
User Message : Security negotiation Error: NotAllowed(2)
[2014-Dec-11 08:20:11] RDP (0): correlation id: 012580ec-dbe5-8db2-a2c0-1c58dfb00000
[2014-Dec-11 08:20:11] RDP (0): Resolved 'replaced.host.name' to '1.2.3.4' using NameResolveMethod_DNS(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Dec-11 08:20:11] RDP (0): **** User ACCEPTED connection to basic security host
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Dec-11 08:20:40] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Dec-11 08:20:40] RDP (0): Protocol state changed to: ProtocolActive(5)

SOA Suite 10.1.3.4 BPEL Console not working after install the mlr#4 patch

After install the mlr#4 patch for 10.1.3.4 version the BPEL console dos not work. The BEPL is up and running , I can deploy projects, all domains are fine and working (I see on the logs) but the console show the following error:
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.4.0
Build: 0
Build time: Sun Jan 11 19:33:46 PST 2009
Build type: release
Source tag: PCBPEL_10.1.3.4.0MLR#4_GENERIC_RELEASE
Exception Message:
javax.servlet.ServletException - com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
When I check the log I can see this:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-01-26T16:18:33.115+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>soasit.BCR.WAN</HOST_ID>
<HOST_NWADDR>172.19.128.128</HOST_NWADDR>
<MODULE_ID>security</MODULE_ID>
<THREAD_ID>15</THREAD_ID>
<USER_ID>oracle</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1232979513:172.19.128.128:4415:0:247</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>ServletException cause</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
     at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:91)
     at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:236)
     at _ngDeployedProcesses._jspService(_ngDeployedProcesses.java:118)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
     at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
     at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:456)
     at _index._jspService(_index.java:104)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:230)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.handleNotFound(HttpRequestHandler.java:1042)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
     at java.lang.Class.getMethod(Class.java:1581)
     at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599)
     at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385)
     at ProcessManagerBean_RemoteProxy_4bin6i8.getMetaData(Unknown Source)
     at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:232)
     ... 52 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
If I rollback the mlr#4 , everithink works fine. With mlr#3, mlr#2 the problem is the same.
The platform is one for development installer on RedHat 5 OS.
Any ideea ?
Edited by: [email protected] on Jan 26, 2009 4:34 PM

Man Christian!
1000 Thanks for your tip. I run into same issue on W2K3 with 10.1.3.4 MLR#4 (so far last MR allowed for AIA apps).
I had the orabepl.ear file of the size as was mentioned earlier: 2.530.260 in the bpel\system and other one on the j2ee\ocj4_soa\applications folder.
Copying did not help.
I had to perform following steps from the <MLR#4>/custom/scripts/post.bat file which takes the file from the bpel\system,
ADDS some another .jars in it and ONLY THEN move it to the j2ee\...\applications folder:
copy %ORACLE_HOME%\bpel\system\j2ee\orabpel.ear %ORACLE_HOME%\bpel\system\services\lib\orabpel.ear
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\oc4j_ejb_services.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_services.jar
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\ejb_ob_engine_oc4j.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_ob_engine.jar
cd %ORACLE_HOME%\bpel\system\services\lib
%ORACLE_HOME%\jdk\bin\jar -uvf orabpel.ear ejb_services.jar ejb_ob_engine.jar
After doing manually these steps the orabpel.ear in j2ee\...\applications has got the size: 2.798.840 which was bigger as right after patch application.
Then I deleted the orabpel folder from the j2ee\...\aplication-deployments
started the j2ee containe (it was named: oc4_soa ) and the BPEL Console started live well as before in 10.1.3.3
As I did verify from other files The rest of steps from the post.bat file seems did well, only this part was not executed.
With Best Regards,
Alexey

Edit Template in Dynamic Conversion Admin is not working

Latest oracle UCM 10gR3 is installed with patches and Site Studio 1ogR4 on windows XP and it is running fine.
When I click on "Edit Template" button after selecting a template in Oracle Content Server >> Administration >> Dynamic Converter Admin >> Edit template nothing happens and no error message is displayed. Some times a dialog pops up with message "preparing to install template editor..". The first time I clicked on this "Edit Template" button, it has installed "Template Editor 10gR3(10.1.3.4.1) version 9.0.0" successfully and it is there in program files.
I find that Dynamic Conversion is working fine by checking in a word doc and it generates HTML. I tried this on IE6 and IE8 on two different UCM installation by enabling IE to run all ActiveX and Javascript but it did not work on either. I am logged on as admin user.
What could be the issue and how to resolve?

Hi
Check Note.941978.1 to see the possible cause of the issue and also the workaround for the same.
Thanks
Srinath

Oracle ses Admin password not working

Hi,
The ip address of my machine has changed. So, the admin and search pages were not opening up since they have old ip address.
So I went to the files and changed all the occurences of old ip with new one. I was not able to change it in .dbf and .lock files.
After that, when I try to login through admin page, the password is not working.
Getting "Login failed. Check the log file for more information." Which log file to check for?
Please suggest some workaround.
Thanks,
Shyamala

The log file is the oc4j log file in $SES_HOME/oc4j/j2ee/OC4J_SEARCH/log. See more info here.
Is this Windows? Before installation, you should have set up a loopback network adapter, as per the install guide. The setup would then have been immune to changes in IP address.
If the server name is hard coded into the various config files, it's easy enough to add an entry to the HOSTS file.
For example have a look in %ORACLE_HOME%\network\admin\listener.ora. You might find a line
(ADDRESS = (PROTOCOL = TCP)(HOST = DHCP_HOST_12345)(PORT = 1521))
This means the machines host name was supplied by DHCP and is no longer valid. If so simply make an entry in your hosts file
(C:\Windows\System32\drivers\etc\hosts or /etc/hosts) which looks like
127.0.0.1 dhcp_host_12345
That will force it to loop back to the local machine for all references to dhcp_host_12345
If you've actually got hard-coded IP addresses in the config file, things are a little harder. See what's in the oc4j log file and I might be able to suggest how to continue.

Manufacturing-admin still not working

Hi everyone!
I had no problem in getting SQL Trace up and running on my local Netweaver instance. However now I'm stuck getting SQL Trace running on our test machine. I followed the instructions given in the respective documents as well as the ones given in thread [http://localhost:50000/manufacturing-admin/ not working |http://localhost:50000/manufacturing-admin/ not working ] - yet it won't work. In ICM Monitor the status of HTTPS protocol is inactive.
What might I be missing? Thanks for hints on solving this issue.

Hi Juliane,
There are a lot of SAP Cryptographic libraries available from Service Marketplace, but it's tricky to find them:
1. Login to the Service Marketplace
2. Navigate to Software Downloads - > Installations and Upgrades
3. In the download catalog find the link SAP Cryptographic Software
4. Click the same link once again and in the popup window agree to the terms
5. Browse the list of all available cryptographic libraries and download the one suitable for you software/hardware config
There are just three different libraries for Microsoft Windows:
1. SAP Cryptographic Library Microsoft Win32 for x86/IA32 3342 08/06/2010
2. SAP Cryptographic Library Microsoft Win64 for IA64 (Itanium) 3342 08/06/2010
3. SAP Cryptographic Library Microsoft Windows 2003 for x86_64 3342 08/06/2010
You probably need the first one
Let us know if it helps
Good luck
Ivan

WebAccess Admin Portal not working after upgrade to GW 2014

GroupWise was upgraded from2012 to 2014 on a Windows 2008 R2 Enterprise SP1 64 bit. GroupWise WebAccess is working fine but when I try to get to the WebAccess Admin console, http://server IP/gw/webacc?action=Admin.Open, I received the following error message after I put in my login information (yes, it does bring me to the login screen).
Error message: Unable to connect to the GroupWise Admin Console @https://127.0.0.1:9710/gwadmin-service/system/whoami
It was functioning before the upgrade. On the GroupWise server, if I go to http://127.0.0.1 it does take me to the Welcome screen and if I go to http://127.0.0.1/gw/webacc I can successfully log into my GroupWise WebAccess account.
Why can't I Access the WebAccess Admin Console?
Thanks,
Kim Akey

I believe you must use admin user you defined for the new Gw2014 administration web console for login.
Lep pozdrav / Regards
Mare Selan

Resources created w/MQ Admin Console not seen in GF Admin console

Environment:
Glassfish Enterprise Server v2.1
JDK 1.6.0_11-b03 (bundled)
Sun Java(tm) System Message Queue 4.3 (Build 7-g)
Windows XP SP3
Following the documentation in Chapter 1 of the Sun Java System Message Queue 4.1 Administration Guide[1] I used the MQ Admin Console SWING tool to create an ObjectStore with the following properties:
java.naming.provider.url - file:///C:/imq_admin_objects
java.naming.factory.initial - com.sun.jndi.fscontext.RefFSContextFactory
In that object store I created six destinations (3 Queues and 3 Topics) along with one connection factory.
I also used the Admin Console to create one Broker with host set to localhost and primary port set to 7676. Within that broker I created 6 physical destination for the destinations I created in the object store.
In the Glassfish administration console under Configuration -> Java Message Service -> JMS Hosts -> Physical Destinations none of the ones I created in the Broker using the MQ Admin console were visible. I suspected this was due to the fact that GF needs the naming properties I set when I created the ObjectStore with the MQ Admin console so I set them under Configuration -> Java Message Service : Additional Properties. When I did that and restarted the domain the physical destinations I created with the MQ Admin console now showed up in the GF admin console's Physical Destinations section.
However, the ConnectionFactory and Destinations I created in the ObjectStore do not show up in the GF Admin console's Resources -> JMS Resources -> Connection Factories and Resources -> JMS Resources -> Destination Resources respectively. I suspect this is also a case of needing to feed some properties to the domain somewhere but I don't see an obvious place to do so. Nor am I sure what they should be since they need to be scoped to the JMS resource but simply adding a property like java.naming.factory.initial to a more global scope then one affecting only JMS would be 'a bad thing'.
FWIW the GF Enterprise Server 2.1 Administration Guide [2], Chapter 4 - Configuring Java Message Service Resources does not touch on this subject either.
TIA,
-NBW
[1] http://docs.sun.com/app/docs/doc/819-7755/gcrlv?a=view
[2] http://docs.sun.com/app/docs/doc/820-4335/abljw?a=view
Edited by: NBW-2009 on May 27, 2009 1:24 PM

You might want to check with the glassfish/application server forum first
http://forums.sun.com/category.jspa?categoryID=109
-Mathi

Admin Console not working

Similar Messages

Maybe you are looking for