Admin,help me out here
Plz admin,help me out here,its argent!d virus enters 2 mi phone via d memory card i guess,n it shots the battery when even the battery is full,could plz tell me an antivirus to scan or what is its problem as u think sir plzzz,
What you are assuming is totally wrong. Have a look at THIS. The reason may be something else. Pl. provide your phone details.
Similar Messages
-
What burns me up about the Pixi (sprint)-If you can, help me out here
This is a half rant half 'I hope someone can help me out here with something I'm doing wrong' post, because my experience with this phone makes me want to smash it into a developers face. (Try not to take offence, it's just a thought, I am actually physically stuck with this phone)
Messaging:
No time stamps for messaging? With my pending civil court case, it'd be nice to have this rudimentary gem that's been on every phone since 1998. But let's be honest...it's just nice to know when what was said. Awesome that I can save every message for 3 months. Blows that I can't figure out when it was sent.
Missed Calls:
OK being that I actually like to think of my pixi as a phone first, then a "computer", I'd love to be able to sift through my missed calls on the red missed call alert bar. Since I'm too much of a, "let's get this done now" guy, I hate loading an app to get to my missed calls off of a little button on an already small interface. If I don't want to load the app, I have to click on the missed call alert bar, make my phone dial the number, end the call immediately, and continue untill I go through all of my missed calls (Yea I've done it before, I hate loading apps that bad). How about if you drag down on the missed call alert bar, it pulls the top one off and reveals the PREVIOUS missed call. (Holy ----! Am I a genius, or am I just someone who actually used this phone for more than 3 minutes?) Hopefully I can just sift through my calls on the messed call's red alert ball, but I've tried it every which way and I don't think I can...Help me out here.
SMS through missed call icon also only works when it wants to (software issue)
Airplane Mode: I accidentally put my phone into Airplane mode like twice a week. This blocks all calls and you just don't even know it's on until you notice the plane on the screen. Why is it so easy? Does palm not realize the consumer base that this phone makes it to probably uses an airplane once every year? I mean I've never even been on a plane and I got suckered into this thing, yet I feel like I should be able to have enough frequent flier miles to go around the world 6 times accoroding to how much I accidentally turn on Airplane Mode. Wth? Whose idea was that?
Facebook syncing: Seriously, who in their right mind wants every single one of heir FB friends on their phones? Certainly not me. Sorry I don't need to talk to all 400 people I've added from school. Best part is, once the syncing deed is done, you can't stop it. That's just brilliant. You spend an hour sycing your phone to FB, just to reset your contacts.
Ringtones: Text messaging ringtones literally plays for about 10 seconds and stop. Who on gods green earth told you that it'd be Ok to play any ringtone for like 10 seconds? Seriously...? PLEASE tell me I can change this. I can't even get through the intro of a song in 10 seconds. That's just great. May I add my ringer just seems to have shut off today. Why and when, I don't know. But my ringer is on, turned up, and I'm just getting text messages and calls as I type this with no sounds. lol Seriously. I'm not even kidding. I don't know how to make the alert sound. That's absurd. lol Like really I'm laughing at how pitiful it is that this is what my phone does so I'll just type another lol to further express how much of a joke this phone is to me. lol
Contact Reminder: Now I'm not sure what I'm doing. But pretty often, when trying to hurriedly dial a number, I accidentally hit contact reminder, load a new app. Meanwhile I have to get rid of the app and get to my phone. Now here's the kicker...I did it "hurriedly"(yea I make up words when I need to) which means I'm in a rush. Thx for not helping whatever situation I'd be in/have been in, Palm...You're supposed to work with me, not against me. :\
Calendar: Awesome app. I actually bought this phone for its uses here. But I'm not sure if it's just me, or the phone, but I can't even have this thing remind me to take out the trash every WEDNESDAY. From what I can tell, I can only do reoccuring reminders by date, and not by day. Seriously? If I'm not missing something here and that is the case, you've completely failed your name Palm. Just saying, I mean jeez...
Youtube: Now really. You almost outdid yourself with the youtube app. You could have made me forget of all of this phones shortcomings had you not just screwed up here too. Now I don't know who you have agreements with, but since I can't actually get the same vids I'd normally get on the computer (for example, music videos) to come up in my search, you've essentially turned youtube, "you"sless. Now that actually takes more effort in screwing up than not. This thing right here just makes me think you're trying to get me mad.
Small keys:Won't even touch on that subject, I should have noticed from the get go. I knew it, thought I'd get used to it, but no. They are just too small and that's that. Not even blaming palm for this one.
Palm taught me 2 things with this phone.
1: Never buy from palm again, we just don't seem to agree on what a phone should do. I had great expectations in the Palm name, only to find out that I'm going to be enraged by the phone daily.
2olidification in the notion that "if it's too good to be true, it probably is." Because that's exactly what I got out of the experience with this phone.
So unless someone can set my problems straight, I'm going to be looking foward to my next upgrade like it's the last day of school for a 12 year old. At least life won't continue speeding by as long as I have this thing. I guess that's one bonus. :\
The worst part is this is all that I can think of sitting here. I can probably edit this throughout any given day to make it into a small book. Which I would try to publish if I'm not flat out wrong about at least half of these "problems". Because if so...this phone should have never hit the market. No offense. Like I said, I actually have to use this phone. Palm just gets more money out of it.
Thx if you read, and thx if you help me out. I hope someone tells me what I'm doing wrong and makes me look like a complete idiot. This is your chance, defend palm!
Post relates to: Pixi p120eww (Sprint)Hi ChrisBell,
my Pixi shows me the missed calls in a list of its own? I don't have many, so maybe I'm missing something. But I agree with your half-ranting to some degree. As a long-time Palm-user (my last phone was a Treo 680, terrible form factor, good UI), I am really disappointed with the standard software on this phone. Memos and Tasks, which AFAIK were there and useful even on the first Newton's, have regressed beyond the point of usefulness now (solution: Toodledo and Done!, at least for now).
But ChrisBell: if you feel up for it, you could start tinkering. Many people love these phones so much they have started developing patches to solve the obvious problems skimmed over by developers. Try looking up "webosquickinstall" and "preware", and you will find over 300 patches and a lot of free software to help you out. I am not a computer wizard myself, but I am not scared of them either, and I have been able to make good use of all these extras made available by the community.
just a thought, might help you out on a few of your half-rants -
I have my itunes stored on my external hard drive of my IMac.
I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
Can anyone help me out here? Thanks.I have my itunes stored on my external hard drive of my IMac.
I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
Can anyone help me out here? Thanks. -
PLZ help me out here...URGENT....
Here, actually i need to request the program to ask the user howmany lines does he wants by asking him to input the number of lines and at the same time write the whole text line that he requested to anew file. PLZ help me out here. So, the program shud display the text files that it read line by line after the user enters the number of lines he wants....DO i need to manipulate the loop or wat???..plz help me out here guys...thanks in advance....
here is the code...
import java.io.*;
class FileReadTest3 {
public static void main (String[] args) {
FileReadTest3 f = new FileReadTest3();
f.readMyFile();
void readMyFile() {
DataInputStream dis = null;
String record = null;
int recCount = 0;
int EnterNum = 0;
System.out.println("Please enter the number of lines: "+EnterNum);
try {
File f = new File("aliran.txt");
FileInputStream fis = new FileInputStream(f);
BufferedInputStream bis = new BufferedInputStream(fis);
dis = new DataInputStream(bis);
for(int recCount = 0; recCount <= 10, recCount++)
recCount++;
System.out.println(recCount + ": " + record);
} catch (IOException e) {
// catch io errors from FileInputStream or readLine()
System.out.println("There was a problem for finding the file!" + e.getMessage());
} finally {
// if the file opened okay, make sure we close it
if (dis != null) {
try {
dis.close();
} catch (IOException ioe) {
}1.) Actually perform some user input of any kind. Right now, the user has no choice.
2.) Read from your file, for that's why you opened it.
3.) Don't use a DataInputStream unless you know what you're doing. Use a BufferedReader instead if it's simply text.
4.) Insert a condition check for the number of lines -- yes, you need to manipulate the loop or what.
P.S.: Multiple posting, no use of code tag, the word "URGENT" in subject, calling people "man" ... this is like wearing a shirt that says "shoot me!". -
Everytime I skype someone skype makes this horrible clicking/heartbeating sound and its SUPER annoying please help me out here
I've tried signing out, and re-signing in, and even trying it on my phone
and it still makes the sound. It's driving me crazy.
Please help me
-JoshYeah there is no way to put the N73 firmware onto the N70, the phone simply isn't built to use it. There are probably hardware issues too.
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW -
Apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Thanks
Please please help me, if you know how.
-
I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?
Make sure the volume on the iPod is turned up fully, since this will affect what you hear through the stereo.
Make sure Volume Limit is set to full. (From Main Menu, Settings/Volume Limit)
If you purchased your iPod inside the EU (European Union), then the maximum volume from the headphone jack is lower than elsewhere in the world. If this is the case, buy yourself a 30-pin Dock Connector to 3.5mm jack lead, such as the one linked here...
http://www.amazon.co.uk/Decrescent-Connector-Stereo-Auxiliary-iPhone/dp/B007NIE5 EE/ref=sr_1_1?ie=UTF8&qid=1386012456&sr=8-1&keywords=30+pin+to+3.5mm
That connector will take a higher volume out (than the European Union's output) and that will be louder (and hopefully loud enough) through your stereo. -
I'm still confuse with this iCloud mail. I have 2 device which is iPhone and iPad, why every time I receive a mail from my iPhone it doesn't show on my iPad? Can you maybe help me out here thank you
The iphone and ipad must be connected to the same icloud account. Are you by chance using different IDs to connect from each device?
-
I was just listening to my iPod shuffle and it stopped working. I plugged it into the computer to sync it and it won't sync. The little light don't come on on my nano. I've turned it off and on, pushed the play/pause and nothing. Can anyone help me out here?
How long have you left the iPod to charge? It can take up to 30 minutes before it shows any signs of life. Did you use the instructions in this article to properly reset the Shuffle?
Resetting iPod shuffle
B-rock -
Really need help on how to write this program some 1 plz help me out here.
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
?Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.?
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)
For Part 1 this is what i got
import java.util.Scanner;
public class Window
public static void main(String[] args)
double length, width, glass_cost, perimeter, frame_cost, area, total;
Scanner keyboard = new Scanner (System.in);
System.out.println("Enter the length of the window in inches");
length = keyboard.nextInt();
System.out.println("Enter the width of the window in inches");
width = keyboard.nextInt();
area = length * width;
glass_cost = area * .5;
perimeter = 2 * (length + width);
frame_cost = perimeter * .75;
total = glass_cost + frame_cost;
System.out.println("The Length of the window is " + length + "inches");
System.out.println("The Width of the window is " + length + "inches");
System.out.println("The total cost of the window is $ " + total);
Enter the length of the window in inches
5
Enter the width of the window in inches
8
The Length of the window is 5.0inches
The Width of the window is 5.0inches
The total cost of the window is $ 39.5
Press any key to continue . . .
Edited by: Adhi on Feb 24, 2008 10:33 AMAdhi wrote:
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.Looks like homework to me.
What have you written so far? Post it.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
“Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.”
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.So this is where you actually have to do something. My guess is that you've done nothing so far.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)Man, this specification writes itself. Sit down and start coding.
One bit of advice: Nobody here takes kindly to lazy, stupid students who are just trying to con somebody into doing their homework for them. If that's you, better have your asbestos underpants on.
% -
Messy tags in the music player, help me out here!?
Just ripped this great album a few months ago and now I want it on my N82. There's a problem though, and I think the pictures pretty much talk for themself:
Tags works perfectly in foobar2000. Help a fellow Nokia user out here, because this **bleep** doesn't make any sense at all.
Message Edited by decon on 27-Mar-2009 07:12 PM
Message Edited by decon on 27-Mar-2009 07:12 PMHmm,
I could be wrong, but it looks like you're using Unicode or UTF8 to write your ID3 tags.
Try to change your tagging software to write ANSI IDv3 tags (v2.3).
AFAIK Nokia phones have problems with Unicode / UTF8 tags.
FreeBird -
Could anyone help me out here regarding frame rate?
Hi, everyone,I need help with a dynamic frame rate issue,
I have created this spinning diamond flash with a dynamic frame rate controlled by the mouse cursor.
it spins from the right to the left if the cursor is at the left side of the diamond and vice verse, and also the further away the cursor is from the middle of the diamond, the faster it spins.
it works perfectly awesome in Firefox and by itself, but when it's in IE, the cursor loses control of frame rate, so it spins at the highest frame rate regardless where the cursor is at.
I used nextFrame(), prevFrame() to do the winding and rewinding job, and frame rate gets changed in ENTER_FRAME.
I've heard some say that IE ignores frame rate per frame? is it true? if so, how do I fix it?
Could anyone please help me out with this issue?it only happens in IE.please don't cross-post. let's keep this discussion on the general flash forum.
-
Somebody help me out here!!!!!!! I cant figure out how to play games on mac
evertime i put a pc game in it asks me to look for a file to open it and its onlys the system profiler and it dont work how the **** do you play games on the mac book pRO!!somebody help me out it!!!!
The issue is that you are attempting to run software written for one operating system (Microsoft Windows) on another (Mac OS X). That doesn't work... However, that doesn't mean you're out of luck:
1. Many popular PC games also happen to be available native for the Mac. Check if the particular games you want to play have a native Mac version. If they do, using that is best since it's easier to install and use and will perform best.
2. Failing that, you can actually run Windows on the Mac in order to run the game. There are two supported methods to do this: dual-booting (selecting which environment to use when you start the computer), or virtualization (running Windows as an OS X application).
For games, particularly ones heavily reliant on 3D graphics, dual-boot is currently the best option. This is accomplished using an application called "Boot Camp" (search the Apple site) to setup disk space for the two operating systems and installing a menu that appears when you boot where you can select which operating system to run. Any Windows game will run in this way (assuming you otherwise meet the hardware requirements of the game).
The alternative is virtualization, and there are two packages for that: Parallels and VMWare Fusion (in beta testing). Both will eventually support hardware accelerated 3D, but its not really functional in either yet. However, these applications run Windows as an application under Mac OS X, meaning that you can be running the Windows and Mac OS X applications at the same time (as opposed to Boot Camp, where you have to select at boot time which to run).
Note that all of the approaches require you to have a copy of Windows to install (preferably a legally licensed one). Most people don't have a copy to use since they receive a hardware-locked OEM version with their computer that isn't transferable.
The advice above is applicable to Linux as well. -
i bought this ipod off a friend its second hand but it worked before,, my friend cleared it out so my son can put his own stuff in it ,, but when i turn it on its shows only a usb conneting to itunes and when i connect it to itunes it says soft wear not reconignised and that i should reninstall itunes which i have done 3 times and still it wont connect to itunes,,
ok try this out:
turn the ipod off, than hold the home button and than connect it with your computer, keep holding the home button, if it work fine itunes will give you a message that it found a device in recovery mode and you can try to restore it
also explained here:
http://support.apple.com/kb/ht1808 -
Plz help me out here frez...urgent
i really a need a program code that can read a length of string in a text file adn write the oupt in another file. for example, the program should be able to identify 14 bytesin the text file using string length and insert a semicolon at the end of the 14th bytes ( to be considered as 15th byte ) and finally write it out at a text file..Im really facing difficulties as im a beginner...plz help me...
How quick it is will depend on how much you remember and how quickly you pick things up I guess, but one or more of the following should be good:
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java. This one has been getting a lot of very positive comments lately.
Maybe you are looking for
-
I offer this as my story as an X201 owner and the 'support' i have been given by Lenovo. It is a sad but causionary tale and I would suggest that anyone planning to buy a Lenovo laptop takes note. I initially sent this email on the 8th March and have
-
I replaced my hard drive and reloaded itunes. Now it won't open and I get a message that the file itunes library.itl cannot be read because it was created by a newer version of itunes. What do I do?
-
The network location profile changes from "Domain" to "Private" in Windows 8.1.
I have a network which is centered around a Server 2012R2 installation with the Server Essentials Role installed. I have installed and configured a DNS server which points to the router and open DNS as forwarders. There are 3 physical computers on my
-
USAA World Mastercard approved $16k, NFCU credit limit increase doubled to $20k!
It's about time ladies and gentlemen! 12.99% for NFCU platinum12.90% for USAA World Mastercard Rewards. Full USAA member (I think?) I have Auto, Home, Personal Property Insurance with them. Also Checking, Savings, Stock account. Former enlisted, m
-
Hello, Probably Mr. Allan is very busy and couldn't revise the package. The package doesn't success to compile, since it fails the isl check, as the comment already states. Unfortunately I'm not skilled to put hands on there. Here's the log Check fil