Admin lost in Win 8.1 Pro

Can't copy any files to Local Disk (Drive:C). For Some unknown reason I lost lost my ownership to a system when I checked the advance security settings and asking about CLSID key and I don't know which administrator is the one I should
select in the settings

Hi,
In addition to T.Kujala mentioned , please let us know what files you want to copy to your System Partition.
Did any error appear when the issue occurred?
Under ordinary conditions, the ownership of System Partition(Driver:C) is TrustedInstaller.
I suggest you add your account to "Group or user name " to test it.
1. Right click on Drive C and click Properties.
2. Switch to Security tab, click Edit and Add to add your user account, if it is not listed. Assign the full control permission for your own account and click OK.
Also,I would like to share the article below with you:
http://technet.microsoft.com/en-us/library/cc754344.aspx
Regards,
Kelvin hsu
TechNet Community Support

Similar Messages

Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.

Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
I'm testing 32bit software that will run in 7-64 Pro but will not in win 7 home premium or vista.
The 7-64 Pro machine is NOT running the program in XP mode although is is being run as admin. The 7 home premium and vista beta testers have tried every work around/mode, admin mode, and anti-virus exception. I've run process explorer & WinMerge to evaluate
the differences between os operations & dlls loaded but am unable to find the OS issue.
Currently 2-win7-64 machines, 1 vista machine and 1 win 7 machine had no issues with the program as it started up and ran immediately.
After 3 beta's 30 hours of testing & 50 of my own, I believe I've narrowed the issue down to the win 7 home premium and vista os's.
Can anyone here suggest other ways to further narrow it down so as to provide functionality on all 3 os's?

You must provide the exact name and version of the software for anyone to attempt to answer your question. Primarily the functionality of any software is entirely dependent on what platforms the publisher intended the software to run on.
If you are the programmer you need to go to the Microsoft Developer Network forums for assistance:
http://msdn.microsoft.com/en-US/#fbid=Xt631zR1D90.
This is an End Users' Peer-to-Peer forum that does not address programming from any perspective.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Win 8.1 - Win 8.1 Pro. What lisence type I need?

Hi, Is it possible to update this device (Yoga 3 Pro) from Win 8.1 to Win 8.1 Pro with just giving it a new product key and then using normal Windows update? I suppose updating can be made by normal retail version, but then all Lenovo original software will be gone. So - is there any easy way to update it?

The activation method does not usually govern how to upgrade. If you get a Windows 8.1 Pro Retail key to upgrade, it doesn't matter if the OS is OEM, RETAIL, or some other version.
I upgraded my Yoga 3 Pro to Windows 8.1 Pro by using the "Add Features" feature:
http://windows.microsoft.com/en-CA/windows-8/add-features-frequently-asked-questions
No data was lost, it simply enables more options behind the scenes.

How to install win 8.1 pro x64 on MBA mid 2013 (core i7)

Please help me how to install win 8.1 pro x64 on MBA mid 2013 (core i7).
Thank you very much for your help.
Best regards.

Everything you need to help you is located here: http://www.apple.com/support/bootcamp/

Fresh install Win 8.1 Pro into Pavilion X2 (10", 32GB tablet)

Have a Pavilion X2 (32GB version) with Win 8.1 Bing.
Need to get into domain, therefore wanted to fresh install Win 8.1 Pro, at the same time remove the recovery partition for more space.
F10 to bios to set bootup to USB drive, pops in a Win 8.1 Pro x64 installation disc, but X2 refuses to boot to disc.
Is it the x64 version disc problem or have i missed some setting to make the X2 boot to disc properly??

HI @Nikola84 ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that you are trying to install a clean version of Windows 8.1 ( 64 bit).
What edition of of Windows 8.1 (64 bit ) are you trying to install?
Please provide your exact model of Pavilion 10 x 2.
Regards
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

VM created on Win 8.1 Pro Laptop cannot find win 7 iso file on USB

VM cannot find USB to load Win 7
I have a Windows laptop with Win 8.1 Pro installed. I turned on Hyper-V and created a VM. Everything worked up to that point. I also downloaded the Win 7 iso and placed it on a USB thumb drive. I also downloaded the Win 7 installer.
When I "start" the VM, I get a black screen with a message the VM could not load an OS.
It appears to me that the VM does not know where to look for the OS. I cannot find any way to tell it where to look.
I spent over $300 for upgrades to Win 8.1 Pro and a licensed copy of Win 7 so I could run Win 7 on my laptop as I need it to run UPK (which is not compatible with Win 8).
As a last resort I went to the Micrsoft store in Miami and offered to buy a Surface Pro 3 if they would install the VM and Win 7 on that for me. They said it was very easy to do and I would have no problems, etc., etc., etc. In other words they did not have
a clue about what I was talking about.
I hate to see over $3000 worth of hardware collecting dust on my closet shelf because I cannot use them. I am hopeful someone here can help a non-techie make this thing work.
Thanks in advance,
Dennis
PS - Went to the Apple store last night and was shown a MacBook Air with Parallels installed. It was running Apple stuff on the Apple OS and MS Office 365 on Win 7. It was all very seamless so am leaning very much to going with Apple as a solution.

You don't say that you attached the iso to the VM. The easiest way to do
that is to connect to the VM and then on the console, pull down the
"Media" menu, Select "Insert Disk", then browse to the ISO and select it.
Then under the "Action" menu, select "Reset".
You can also mount an iso in the settings for the VM.
Bob Comer

I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time.How can I recover this data

I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time. How can I recover my documents?

If you never saved, auto save does not kick in.
Peter

Win 8.1 pro 64bit desktop blank screen after logon

Hi all
I have an ASUS P7H55M/USB 3 MB with i5 CPU 4Gig RAM NVIDEA 210 graphics card with latest drivers.
My OS as above being an upgrade from 7 pro to win 8 pro then downloading win 8.1 from the store in the last three months.
In the last few days I suddenly cant access my start screen/desktop after login. Even the usual custom page before the login is a generic blue background so none of my customized profiles shows its customized look.
Again, desktop/startscreen black/blank.
Able to access my files via ctrl alt del etc.
Been reading up and doing restore etc as suggested on various sites including malware scans NO JOY.I even tried to just run a repair using my win 8 pro upgrade disc but the system wont allow something like invalid media or something and I don't have media
for win 8.1 pro as mentioned.
Can anyone suggest a solution please? or am I going to have to reinstall with all the internet data bundle costs included?

In the last few days I suddenly cant access my start screen/desktop after login. Even the usual custom page before the login is a generic blue background so none of my customized profiles shows its customized look.
A problem seen mostly be nVidia users seems to be that the screen being viewed is the secondary of an Extended display, e.g. with the primary being either another monitor or a phantom. Try pressing Win-P, CursorUp, Enter as if you can display and use
the Project dialog to shift from Extend to Duplicate. There should at least be a screen refresh after the Enter.
Able to access my files via ctrl alt del etc.
Ah. That sounds like another problem symptom. Users of third-party system modifications saw this recently when there was an update to some kernel modules. So, presumably explorer.exe is not running then? And restarting it fails?
Event Viewer could be started then and it might give you some clues. Otherwise if you do have system modifications try uninstalling them.
Good luck
Robert Aldwinckle

Win 8.1 PRO: Internet Explorer and integrated Adobe Flash Player no hardware acceleration on GMA

HI, i have a little problem with your latest release.
I have make a total update of the system today (win 8.1 pro 23 March 2014) and i saw that hardware decoding is not working on Internet explorer (the option is not available in the adobe tool: right click\settings)
How can i resolve?
Using Adobe Plugin+an other browser resolve this bug but i want to use IE
Another question: is coming a new version optimized for low-end video card? i have a gma 500 GPU and the performance are sufficient
Have a nice day

is coming a new version optimized for low-end video card?
Not likely, since the trend is to move to higher performance cards and not the toher way around.
As to the inability to access settings, that's in your browser, most likely ActiveX controls blocking it. There are two options:
1. Disable ActiveX controls: http://forums.adobe.com/thread/867968
2. Use the online settings manager: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager.html <--Choose from the links on the left of the page.

Win 8.1 Pro 32 Bit Compatibility with Office 2003 SP3 32 Bit

Hi,
Our one of the customer has recently updated Win 8.1 Pro 32 Bit from Win XP. They are using MS Office 2003 32 Bit since long. With XP Office 2003 was working perfectly. But with Win 8.1 they have found one problem.
When they are typing mail ID in "TO" or "CC" the saved email ID is appear but by pressing ENTER the Auto fill action is not accepted. Because of this problem, customer have to type email id manually each and every time.
Can you please help me to resolve or clarify this problem.
Thank You..!!

Hi Shashank,
Just as Dominic's share, Microsoft Office 2003 suites and applications are not compatible with Windows 8 and later Operating System.
I suggest you upgrade your Office version. Microsoft Office 2013 could work on Windows 8.1 seamlessly.
Karen Hu
TechNet Community Support

Win 8.1 Pro Key Problem or not ?

Okay so i just brought a new computer
with win 8.1 pro
Installed windows when it asked for the key i tried to type the numbers that where on the blue folder thingy i had win8 cd in
an it wouldent let me use the number 0 so i couldent do any thing.......
so i said skip to the key thingy an after a while when the computer was done installing an i finaly was in windows
i had a look an now it suddenly says its activated ? how can it activate it self with a key i havent given it ?
Also the key in the end says AAOEM what does that mean ?

Hi Zaris24,
Have you compared the product ID in the machine with the key you owned ?
To check the product ID:
Right click the start screen and choose "System".
“the key in the end says AAOEM”
It shows us that the product key is a OEM key. OEM activation does not require the user`s actions and the key should only be used to activate this specific machine.
Here is a link for reference(Pay attention to this part” Original Equipment Manufacturer”):
Learn About Product Activation
http://technet.microsoft.com/en-us/library/ff793423.aspx
Hardware vendors perform OEM activation by associating the operating system to the firmware (basic input/output system, or BIOS) of the computer. This process occurs before the computer is sent to the customer so that no additional actions are required
by the user.
If you have any doubts in the genuine of this machine, please run this tool to have a diagnostic:
Microsoft
Genuine Advantage Diagnostic Tool
Best regards

Can't Install Win 8.1 Pro 64bit

Hi Guys,
I just purchase Win 8.1 Pro from the Microsoft Store (AUS). I have created a live usb (selected from the windows setup options) so that I could do a clean install of the OS on my laptop.
Each time that I have installed the OS (both clean or upgrade) it automatically installs the 32bit version. When I purchased the OS, it did not specify whether it was bit-specific, so I assumed it would include both bit versions, with an option to select
during the installation process.
I know my laptop is capable of running 64bit environment as my previous OS was Win 7 Ult 64bit.
Does anyone know what to do to either force the setup into installing 64bit, or any other method to get 64bit installed.
Cheers...

My understanding is that the download from Microsoft will be the same bitness as the OS you were running when you downloaded it.
I don't recall the mechanism, but I do believe with a little elbow grease it's possible to get a 64 bit Windows 8.1 download, as I recall reading another forum thread where someone had the same issue and ultimately solved it. Do some searching for
forum posts on this same subject; I'll bet you can turn up the information.
I wish I'd been able to help you more directly, but don't lose hope.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Connect host win 8.1 pro to vritual domain

Hi,
on my laptop I am running Win 8.1 pro (machine_1)
using Hyper-v I created 3 (gen2) VM running Win2012 servers (DC,node1 node2 they use Internal Virtual Switch)
1.DC is domain controler, I created domain AG and added node1 and onde2 to domain
2.SQL2012 installed as failover cluster on node1 and noode2 (SQLClusterA)
Question
How from machine_1 I can connect to SQLClusterA (in another words how make my virtual domain to be visible for machine_1)?
Thank you

When you created an internal virtual switch, you should have been presented with a virtual NIC on the host. Configure that virtual NIC with the IP addressing scheme you used for your virtual domain. Have the DNS server for that NIC point to
the DC. Do not try to put a default gateway on that virtual NIC - it's not needed because all traffic will be on the single subnet. Besides, it would screw up your regular access on your host.
.:|:.:|:. tim

Safari for win 8.1 pro

where can i download to safari for win 8.1 pro (64bit)
I am already safari at home on my macbook but i wanto use safari on my pc at work.
many thank for your help

Use may use the last version of Safari available for PCs, it will work just fine.
Here's the link.

Upgrade from win 8.1 pro to win 8.1 enterprise without loosing all settings & programs

I would like to upgrade from win 8.1 pro to win 8.1 enterprise without loosing all my current settings and programs...
Is there a way?
Many thanks
Sepp
Thanks Sepp

Hi,
I think this design by default, you can refer to the link below for the statements:
Windows 8 and Windows 8.1 Upgrade Paths:
http://technet.microsoft.com/en-us/library/jj203353.aspx
Roger Lu
TechNet Community Support

Admin lost in Win 8.1 Pro

Similar Messages

Maybe you are looking for